Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Contribución de congreso (ConferenceOutput)

Measurement of the Pu-242(n, γ) cross section from thermal to 500 keV at the Budapest research reactor and CERN n_TOF-EAR1 facilities

  • Lerendegui-Marco, J.
  • Porras Sánchez, José Ignacio|||0000-0003-0754-8717
  • Praena Rodríguez, Antonio Javier
  • TOF Collaboration
This measurement has received funding from the EC FP7 Programme under the projects NEUTANDALUS (Grant No. 334315) and CHANDA (Grant No. 605203), the Spanish Ministry of Economy and Competitiveness projects FPA2013-45083-P, FPA2014-53290-C2-2-P and FPA2016-77689-C2-1-R and the V Plan Propio de Investigacion Programme from the University of Sevilla. Support from the German Federal Ministry for Education and Research (BMBF), contract number 03NUK13A, is gratefully acknowledged., The design and operation of innovative nuclear systems requires a better knowledge of the capture and fission cross sections of the Pu isotopes. For the case of capture on Pu-242. a reduction of the uncertainty in the fast region down to 8-12% is required. Moreover, aiming at improving the evaluation of the fast energy range in terms of average parameters, the OECD NEA High Priority Request List (HPRL) requests high-resolution capture measurements with improved accuracy below 2 keV. The current uncertainties also affect the thermal point, where previous experiments deviate from each other by 20%. A fruitful collaboration betwen JGU Mainz and HZ Dresden-Rossendorf within the EC CHANDA project resulted in a Pu-242 sample consisting of a stack of seven fission like targets making a total of 95(4) mg of Pu-242 electrodeposited on thin (11.5 mu m) aluminum backings. This contribution presents the results of a set of measurements of the Pu-242(n,gamma) cross section from thermal to 500 keV combining different neutron beams and techniques. The thermal point was determined at the Budapest Research Reactor by means of Neutron Activation Analysis and Prompt Gamma Analysis, and the resolved (1 eV - 4 keV) and unresolved (1 - 500 keV) resonance regions were measured using a set of four Total Energy detectors at the CERN n_TOF-EAR1., EC FP7 Programme under the project NEUTANDALUS 334315, EC FP7 Programme under the project CHANDA 605203, Spanish Ministry of Economy and Competitiveness FPA2013-45083-P FPA2014-53290-C2-2-P FPA2016-77689-C2-1-R, V Plan Propio de Investigacion Programme from the University of Sevilla, Federal Ministry of Education & Research (BMBF) 03NUK13A
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Time-of-flight and activation experiments on 147 Pm and 171 Tm for astrophysics

  • Guerrro Sánchez, Carlos
  • Lerendegui-Marco, J.
  • Domingo-Pardo, C
  • Calviño Tavares, Francisco|||0000-0002-7198-4639
  • Casanovas Hoste, Adrià|||0000-0002-7138-0894
  • Cortés Rossell, Guillem Pere|||0000-0002-3648-5826
  • Tarifeño Saldivia, Ariel Esteban|||0000-0001-8552-5030
The neutron capture cross section of several key unstable isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n,gamma ) measurement, for which high neutron fluxes and effective background rejection capabilities are required. As part of a new program to measure some of these important branching points, radioactive targets of 147Pm and 171Tm have been produced by irradiation of stable isotopes at the ILL high flux reactor. Neutron capture on 146Nd and 170Er at the reactor was followed by beta decay and the resulting matrix was purified via radiochemical separation at PSI. The radioactive targets have been used for time-of-flight measurements at the CERN n TOF facility using the 19 and 185m beam lines during 2014 and 2015. The capture cascades were detected using a set of four C6D6 scintillators, allowing to observe the associated neutron capture resonances. The results presented in this work are the first ever determination of the resonance capture cross section of 147Pm and 171Tm. Activation experiments on the same 147Pm and 171Tm targets with a high-intensity 30 keV quasi-Maxwellian flux of neutrons will be performed using the SARAF accelerator and the Liquid-Lithium Target (LiLiT) in order to extract the corresponding Maxwellian Average Cross Section (MACS). The status of these experiments and preliminary results will be presented and discussed as well.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Monte Carlo simulations of the n TOF lead spallation target with the Geant4 toolkit: A benchmark study

  • Lerendegui-Marco, J.
  • Cortés-Giraldo, M.A.
  • Guerrero Sánchez, Carlos
  • Calviño Tavares, Francisco|||0000-0002-7198-4639
  • Casanovas Hoste, Adrià|||0000-0002-7138-0894
  • Cortés Rossell, Guillem Pere|||0000-0002-3648-5826
Monte Carlo (MC) simulations are an essential tool to determine fundamental features of a neutron beam, such as the neutron flux or the ¿ -ray background, that sometimes can not be measured or at least not in every position or energy range. Until recently, the most widely used MC codes in this field had been MCNPX and FLUKA. However, the Geant4 toolkit has also become a competitive code for the transport of neutrons after the development of the native Geant4 format for neutron data libraries, G4NDL. In this context, we present the Geant4 simulations of the neutron spallation target of the n TOF facility at CERN, done with version 10.1.1 of the toolkit. The first goal was the validation of the intra-nuclear cascade models implemented in the code using, as benchmark, the characteristics of the neutron beam measured at the first experimental area (EAR1), especially the neutron flux and energy distribution, and the time distribution of neutrons of equal kinetic energy, the so-called Resolution Function. The second goal was the development of aMonte Carlo tool aimed to provide useful calculations for both the analysis and planning of the upcoming measurements at the new experimental area (EAR2) of the facility.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

New measurement of the 242Pu(n,gamma) cross section at n TOF-EAR1 for MOX fuels: Preliminary results in the RRR

  • Lerendegui-Marco, J.
  • Guerrero, C.
  • Cortés-Giraldo, M.A.
  • Calviño Tavares, Francisco|||0000-0002-7198-4639
  • Casanovas Hoste, Adrià|||0000-0002-7138-0894
  • Cortés Rossell, Guillem Pere|||0000-0002-3648-5826
  • Gómez Hornillos, María Belén
  • Tarifeño Saldivia, Ariel Esteban|||0000-0001-8552-5030
The spent fuel of current nuclear reactors contains fissile plutonium isotopes that can be combined with 238U to make mixed oxide (MOX) fuel. In this way the Pu from spent fuel is used in a new reactor cycle, contributing to the long-term sustainability of nuclear energy. The use of MOX fuels in thermal and fast reactors requires accurate capture and fission cross sections. For the particular case of 242Pu, the previous neutron capture cross section measurements were made in the 70’s, providing an uncertainty of about 35% in the keV region. In this context, the Nuclear Energy Agency recommends in its “High Priority Request List” and its report WPEC-26 that the capture cross section of 242Pu should be measured with an accuracy of at least 7–12% in the neutron energy range between 500 eV and 500 keV. This work presents a brief description of the measurement performed at n TOF-EAR1, the data reduction process and the first ToF capture measurement on this isotope in the last 40 years, providing preliminary individual resonance parameters beyond the current energy limits in the evaluations, as well as a preliminary set of average resonance parameters.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Time-of-flight and activation experiments on 147 Pm and 171 Tm for astrophysics

  • Guerrro Sánchez, Carlos
  • Lerendegui-Marco, J.
  • Domingo-Pardo, C
  • Calviño Tavares, Francisco
  • Casanovas Hoste, Adrià
  • Cortés Rossell, Guillem Pere
  • Tarifeño Saldivia, Ariel Esteban
The neutron capture cross section of several key unstable isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n,gamma ) measurement, for which high neutron fluxes and effective background rejection capabilities are required. As part of a new program to measure some of these important branching points, radioactive targets of 147Pm and 171Tm have been produced by irradiation of stable isotopes at the ILL high flux reactor. Neutron capture on 146Nd and 170Er at the reactor was followed by beta decay and the resulting matrix was purified via radiochemical separation at PSI. The radioactive targets have been used for time-of-flight measurements at the CERN n TOF facility using the 19 and 185m beam lines during 2014 and 2015. The capture cascades were detected using a set of four C6D6 scintillators, allowing to observe the associated neutron capture resonances. The results presented in this work are the first ever determination of the resonance capture cross section of 147Pm and 171Tm. Activation experiments on the same 147Pm and 171Tm targets with a high-intensity 30 keV quasi-Maxwellian flux of neutrons will be performed using the SARAF accelerator and the Liquid-Lithium Target (LiLiT) in order to extract the corresponding Maxwellian Average Cross Section (MACS). The status of these experiments and preliminary results will be presented and discussed as well., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New measurement of the 242Pu(n,gamma) cross section at n TOF-EAR1 for MOX fuels: Preliminary results in the RRR

  • Lerendegui-Marco, J.
  • Guerrero, C.
  • Cortés-Giraldo, M.A.
  • Calviño Tavares, Francisco
  • Casanovas Hoste, Adrià
  • Cortés Rossell, Guillem Pere
  • Gómez Hornillos, María Belén
  • Tarifeño Saldivia, Ariel Esteban
The spent fuel of current nuclear reactors contains fissile plutonium isotopes that can be combined with 238U to make mixed oxide (MOX) fuel. In this way the Pu from spent fuel is used in a new reactor cycle, contributing to the long-term sustainability of nuclear energy. The use of MOX fuels in thermal and fast reactors requires accurate capture and fission cross sections. For the particular case of 242Pu, the previous neutron capture cross section measurements were made in the 70’s, providing an uncertainty of about 35% in the keV region. In this context, the Nuclear Energy Agency recommends in its “High Priority Request List” and its report WPEC-26 that the capture cross section of 242Pu should be measured with an accuracy of at least 7–12% in the neutron energy range between 500 eV and 500 keV. This work presents a brief description of the measurement performed at n TOF-EAR1, the data reduction process and the first ToF capture measurement on this isotope in the last 40 years, providing preliminary individual resonance parameters beyond the current energy limits in the evaluations, as well as a preliminary set of average resonance parameters., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Monte Carlo simulations of the n TOF lead spallation target with the Geant4 toolkit: A benchmark study

  • Lerendegui-Marco, J.
  • Cortés-Giraldo, M.A.
  • Guerrero Sánchez, Carlos
  • Calviño Tavares, Francisco
  • Casanovas Hoste, Adrià
  • Cortés Rossell, Guillem Pere
Monte Carlo (MC) simulations are an essential tool to determine fundamental features of a neutron beam, such as the neutron flux or the ¿ -ray background, that sometimes can not be measured or at least not in every position or energy range. Until recently, the most widely used MC codes in this field had been MCNPX and FLUKA. However, the Geant4 toolkit has also become a competitive code for the transport of neutrons after the development of the native Geant4 format for neutron data libraries, G4NDL. In this context, we present the Geant4 simulations of the neutron spallation target of the n TOF facility at CERN, done with version 10.1.1 of the toolkit. The first goal was the validation of the intra-nuclear cascade models implemented in the code using, as benchmark, the characteristics of the neutron beam measured at the first experimental area (EAR1), especially the neutron flux and energy distribution, and the time distribution of neutrons of equal kinetic energy, the so-called Resolution Function. The second goal was the development of aMonte Carlo tool aimed to provide useful calculations for both the analysis and planning of the upcoming measurements at the new experimental area (EAR2) of the facility., Postprint (published version)