Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Active deformation and seismsmogenic characterizaton of secondary faults in the Alboran Sea constrained by high-resolution bathymetry and seismic data

  • Perea, Héctor
  • Gràcia, Eulàlia
  • Bartolomé, Rafael
  • Martínez-Loriente, S.
  • Gómez de la Peña, L.
  • Díez Tagarró, Susana
  • Dañobeitia, Juan José
Perea, Héctor ... et al.-- American Geophysical Union Fall Meeting, 12-16 December 2016, San Francisco, Recent advances in seafloor and subsurface imaging allow accurately mapping and characterizing the kinematic pattern and the style of deformation of submarine faults with unprecedented detail to better assess seismic and tsunami hazards in coastal areas. The Alboran Sea is a Neogene basin generated by crustal extension associated with the subduction in the Gibraltar Arc. At present, several fault systems absorb part of the strain related to the NW-SE convergence (4-5.5 mm/yr) between the African and Eurasian plates. Consequently, the Alboran Sea shows a significant seismic activity. New high-resolution bathymetric and seismic data reveal the presence of poorly known pervasive fault systems in the central part of the Alboran Sea, the Averroes Fault (AF) and the North Averroes Faults (NAFs). These are secondary fault systems located between two large active faults, the Carboneras and Yusuf/Alboran Ridge faults, and represent a hitherto unrecognized seismogenic potential. The WNW-ESE trending AF and NAFs, which may have evolved since the Lower Pliocene (4.57 Ma), are subvertical right-lateral strike-slip active faults since: a) are offsetting the Quaternary sedimentary units and deforming the seafloor; and b) produce a right-lateral displacement of the northwestern margin of the Alboran Channel and across the Adra Ridge North. Given that the AF and NAFs have formed in a continental crust and that are located in a zone surrounded by some of the main active faults in the Alboran Sea, we postulate that these fault systems have been developed into a distributed dextral strike-slip shear zone with the local bulk shear striking approximately N90º. Considering their surface length they could generate earthquakes with magnitudes (Mw) between 6.3 and 7.2, but reaching 7.6 when AF and Yusuf Fault are linked. The high resolution bathymetry map has allowed us measuring lateral offsets produced by the AF and NAFs. Assuming that these displacements have been accumulated during the last 4.57 Ma, the calculated lateral slip rate for AF is approximately1.5 mm/yr and range between 0.2 and 0.4 mm/yr for the NAFs. Our results evidence the importance of the kinematic and seismogenic characterization of secondary fault systems to better comprehend earthquake and tsunami hazards, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Holocene deformation offshore Ventura basin, CA, constrained by new high-resolution geophysical data

  • Perea, Héctor
  • Ucarkus, Gülsen
  • Driscoll, Neal
  • Kent, Graham
  • Levy, Yuval
  • Rockwell, Thomas
American Geophysical Union Fall Meeting, 11-15 December 2017, New Orleans, The Transverse Ranges (Southern California, USA) accommodate the contraction resulting from a regional restraining bend in the San Andreas Fault to form a thrust-and-fold belt system. The southern boundary of this system corresponds to the E-W trending Ventura basin, which is filled by more than 5 km of Pleistocene sediment and is shortening at about 10 mm/yr as inferred from geodetic data. Although the different thrust and folds are fairly well known in the onshore areas of the basin, there is still uncertainty about their continuation in the offshore. The analysis of new high-resolution (SIO CHIRP) and existing (USGS sparker and chirp) seismic data has allowed us to characterize better the active geological structures in the offshore. In the dataset, we have identified different latest Quaternary seismostratigraphic units and horizons, with the most regionally recognized being a transgressive surface (LGTS) associated to the Last Glacial maximum and subsequent sea level rise. A series of E-W regional folds related to thrust faults have deformed the LGTS producing highs and depressions. The correlation of these structures between profiles shows that they are elongated and parallel between them and continue to the coastline. In addition, considering their trend and kinematics, we have been able to tie them with the main onshore active thrusts and folds. Above the LGTS we have identified progradational and agradational units that are related to global sea level rise, which exhibit less deformation (folding and faulting) than the lower units and horizons. However, we have recognized some specific fold growth sequences above LGTS associated with the activity of different thrust-related anticlines. Accordingly, we have identified between 3 and 5 tectonic deformation events (e.g., earthquakes) associated to thrust fault activity. These results may help us to determine the deformation history for the offshore Ventura basin and the potentiality of the thrust faults that may be tsunamigenic, and compare our observations to the onshore results, This research has received funding from the SCEC (award #12026) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No H2020-MSCA-IF-2014 657769 (PALEOSEISQUAKE project; www.researchgate.net/project/PALEOSEISQUAKE), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Kinematic analysis of distributed strike-slip shear zone reveal significant geohazard by secondary faults in the Alboran basin

  • Perea, Héctor
  • Gràcia, Eulàlia
  • Bartolomé, Rafael
  • Martínez-Loriente, S.
  • Gómez de la Peña, L.
  • Moreno, Ximena
  • Lo Iacono, Claudio
  • Díez Tagarró, Susana
  • Tello-Antón, María Olvido
  • Ballesteros, María
  • Dañobeitia, Juan José
FLOWS : 6th Management Committee (MC) and Working Group (WG) Meeting, 16-18 November 2016, Barcelona, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Holocene deformation events in the offshore Transverse Ranges (California, USA) constrained by new high-resolution geophysical data

  • Perea, Héctor
  • Ucarkus, Gülsen
  • Driscoll, Neal
  • Kent, Graham
  • Levy, Yuval
  • Rockwell, Thomas
8th International INQUA Meeting on Paleoseismology, Active Tectonics and Archeoseismology (PATA), 13-16 November 2017, Blenheim, New Zealand.-- 4 pages, 3 figures, The Transverse Ranges (Southern California, USA) accommodate the contraction resulting from a regional restraining bend in the San Andreas Fault to form a fold-and-thrust belt system. The southern boundary of this system corresponds to the E-W trending Ventura basin, which is filled by more than 5 km of Pleistocene sediment and is shortening at about 7-10 mm/yr. Although he different thrusts and folds are fairly well known in the onshore areas of the basin, there is still uncertainty about their continuation in the offshore. The analysis of new high-resolution seismic data (chirp) and its combination with existing geophysical information has allowed us to map and characterize the active geological structures in the offshore. In addition, we have also identified 3 to 5 fold growth sequences associated with tectonic deformation events (e.g. earthquakes) in different thrust-related anticlines. This information may help us to determine the deformation history in the basin, This research has received funding from the SCEC (award #12026) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No H2020-MSCA-IF-2014 657769, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Holocene deformation events in the offshore Transverse Ranges (California, USA) constrained by new high-resolution geophysical data

  • Perea, Héctor
  • Ucarkus, Gülsen
  • Driscoll, Neal
  • Kent, Graham
  • Levy, Yuval
  • Rockwell, Thomas
8th International INQUA Meeting on Paleoseismology, Active Tectonics and Archeoseismology (PATA), 13-16 November 2017, Blenheim, New Zealand, This research has received funding from the SCEC (award #12026) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No H2020-MSCA-IF-2014 657769, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New high-resolution seismic data reveals the Holocene active structures and deformation events in offshore Ventura basin, CA

  • Perea, Héctor
  • Ucarkus, Gülsen
  • Driscoll, Neal
  • Kent, Graham
  • Levy, Yuval
  • Rockwell, Thomas
Southern California Earthquake Center Annual Meeting, 9-13 September 2017, Palm Springs, During the last 2-5 Ma, the Transverse Ranges (Southern California) have been subject to a N-S compression related to the formation of a regional restraining bend in the San Andreas Fault and resulting in the development of an E-W trending thrust-and-fold belt system. The eastward striking Ventura basins and its offshore extension, which is filled by more than 5 km of Pleistocene sediment, cross the western Transverse Ranges. The analysis and inversion of GPS data reveal a north-south convergence at 7–10 mm/yr and fast contraction rates along the Ventura Basin. Although the different thrust and folds are fairly well known in the onshore areas of the western Transverse Ranges, there is still uncertainty about their continuation in the offshore. The analysis of dense seismic dataset consisting in new high-resolution (SIO CHIRP) and existing (USGS mini-sparker and chirp) profiles and covering the zones close to the coastline has allowed us to characterize better the active geological structures in the offshore Ventura basin. In the dataset, we have identified two different seismostratigraphic units separated by a regional erosional unconformity, which corresponds to a transgressive surface (LGTS) associated to the Last Glacial Maximum and subsequent sea level rise. The LGTS developed over the Pleistocene units at 10-8 ka BP and since then it has been uplifted and folded. We interpret this deformation as probably related to blind thrust and backthrust faults. Below the LGTS, there are the Early to Late Pleistocene units, which are folded (anticlines and synclines) and being some of them also associated with the folding of LGTS. Above the LGTS, there is the Holocene unit, which presents an irregular distribution and thickness and shows less deformation (folding and faulting) than the LGTS and Pleistocene units. Based on the correlation of the identified faults and folds between the different profiles, we have been able to tie them to the main fault systems mapped onshore, the Pitas Point, the Red Mountain, and the Mesa Rincon Creek faults, and to the Ventura-Avenue anticline. Furthermore, we have interpreted between 3 and 5 different Holocene deformation events (i.e. earthquakes) on the different structures due to the recognition of anticline scarps, growth strata sequences, onlap unconformities and erosion surfaces in the Holocene unit, This research has received funding from the SCEC (award #12026) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No H2020-MSCA-IF-2014 657769, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Quaternary active tectonic deformation of the transgressive surface offshore Ventura, CA, constrained by new geophysical data

  • Perea, Héctor
  • Ucarkus, Gülsen
  • Driscoll, Neal
  • Kent, Graham
  • Rockwell, Thomas
Seismological Society of America Annual Meeting, 18-20 April 2017, Denver, Colorado, The Transverse Ranges are a thrust-and-fold belt that accommodates the contraction resulting from a regional restraining bend in the San Andreas fault. The E-W trending Ventura basin, which is filled by more than 5 km of Pleistocene sediment, is shortening at about 10 mm/yr as inferred from geodetic data. Although the geological structure is fairly well known in the onshore areas of the basin, there is still discussion about how the different onshore thrust and folds continue in the offshore, and the deep relationship between the main faults. New high-resolution seismic data (chirp) was acquired in the area, that when combined with existing geophysical information, allows for a better understanding of the current activity of geological structures in the offshore. The dense seismic dataset allows us to identify different latest Quaternary seismostratigraphic units and horizons, with the most regionally recognized being a transgressive surface (LGTS) associated to the Last Glacial maximum and subsequent sea level rise. This surface is cut across and deformed by a series of E-W regional folds that produce elongated and parallel highs and depressions, and some emergent faults. Below the LGTS there is Early to Late Pleistocene units that are deformed by high amplitude regional folds and some local faulting. Above the LGTS we have identified progradational and agradational units that are related to global sea level rise, and which show less deformation (folding and faulting) than the lower units and horizons. Based on our analysis of the entire dataset, we have mapped the late Quaternary active structures in the offshore Ventura basin, which leads us to propose a new deep structural geological model of the basin. In addition, a preliminary interpretation of some specific fold growth sequences has allowed us to identify different tectonic deformation events (e.g. earthquakes) and, thus, their deformation history may be determined, This research was supported by PALEOSISQUAKE MSC-EU Project (H2020-MSCA-IF-2014 657769). Hector Perea was a fellow researcher under the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2014 657769), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault and fold segmentation and complexity: New Insights from 3D P-Cable data Offshore Southern California

  • Perea, Héctor
  • Holmes, James J.
  • Driscoll, Neal
4th Fault2SHA Workshop, Fault Complex Interaction: Characterization and Integration into Seismic Hazard Assessment (SHA), 3-5 June 2019, Barcelona, Often fault and fold segmentation and characterization of their kinematics and evolution in time is based on surficial geology and 2D seismic data. Despite many advances, 3D seismic data is required to understand how faults interact in space and time and the complexity of the fault systems. Toachieve this objective, a high-resolution 3D Parallel Cable (P-Cable) seismic dataset was acquired along the Newport-Inglewood Rose Canyon (NIRC) fault. The NIRC is a complex right lateral strike-slip fault system that stretches for 120 km, mostly offshore, and parallel to the southern California coast. The Holocene fault slip-rate ranges from 1.5-2.0 mm/yr to 0.5-1.0 mm/yr, from south to north, according to onshore paleoseismological studies. An earthquake rupturing the entire length of the offshore system could produce a M7.3 earthquake and potentially impact around 20 million Southern California residents. The acquired offshore dataset images the outer continental shelf and upper slope. The preliminary analysis of this high-resolution seismic volume has allowed mapping of several faults that offset different seismostratigraphic units. The mapping shows two main families of faults, some trending N-S to NNW-SSE and the others NE-SW, being the former the predominant. In addition, it reveals that the faults consist of a number of segments that may join at depth, but also that the NE-SW system acts as a structural boundary in the continuation in the N-S faults and folds. In conclusion, the 3D mapping of the geological structures along the NIRC system highlights the complexity and relationship between faults and folds in a shear zone, This project has received funding from the European Union's horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 657769 (PALEOSEISQUAKE), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault Segmentation Controls on Stratal Geometry and Morphology : New Insights from 3D P-Cable data Offshore Southern California, Stratigraphic control on fault segmentation and interaction. New constrains based on a 3D P-Cable survey offshore California

  • Perea, Héctor
  • Holmes, James J.
  • Driscoll, Neal
American Geophysical Union Fall Meeting, 10-14 December 2018, Washington D.C., Often fault segmentation and characterization of their kinematics and evolution in time is based on superficial geology and 2D seismic data. Despite many advances, 3D seismic data is required to understand how faults interact in space and time. To this objective, a high-resolution 3D Parallel Cable (P-Cable) seismic dataset was acquired along the Newport-Inglewood Rose Canyon (NIRC) fault system on the scope of the Sothern California Regional Mapping project. The NIRC is a complex right lateral strike-slip fault system that stretches on the offshore for 120 km. The fault slip-rate ranges from 1.5-2.0 mm/yr to 0.5-1.0 mm/yr, from south to north, according to onshore paleoseismological studies. The acquired offshore dataset images part of the continental shelf and the slope in front of the San Onofre Nuclear Generating Station. The preliminary analysis of this high-resolution seismic volume has allowed mapping several faults that are offsetting different seismostratigraphic units. In addition, it reveals that the faults consist in a number of segments that join in depth, but also laterally. The seismostratigraphic units show changes of thickness across the different faults. Comparing the different depocenters related to the faults will allow characterizing in time the evolution of the fault system and the growth of the different fault segments. We expect to obtain a 3D geometry of the fault system and the seismostratigraphic units highlighting the interaction through time between sedimentation and fault activity, This project has received funding from the European Union's horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 657769 (PALEOSEISQUAKE), Peer Reviewed