Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

European Multidisciplinary and Water-Column Observatory - European Research Infrastructure Consortium (EMSO ERIC): challenges and opportunities for strategic European marine sciences

  • Favali, Paolo
  • Dañobeitia, Juan José
  • Piera, Jaume
  • Bardají, Raúl
  • Bartolomé, Rafael
  • García-Sánchez, Óscar
  • EMSODEV project team
Favali, Paolo ... et al.-- 7th International Workshop on Marine Technology – Martech Workshop 2016, 26-28 October 2016, Barcelona.-- 2 pages, 2 figures, EMSO (European Multidisciplinary Seafloor and water-column Observatory, www.emso-eu.org) is a large‐scale European Research Infrastructure I. It is a distributed infrastructure of strategically placed, deep‐sea seafloor and water column observatory nodes with the essential scientific objective of real‐time, longterm observation of environmental processes related to the interaction between the geosphere, biosphere, and hydrosphere. The geographic locations of the EMSO observatory nodes represent key sites in European waters, from the Arctic, through the Atlantic and Mediterranean, to the Black Sea (Figure 1), as defined through previous studies performed in FP6 and FP7 EC projects such as ESONET‐CA, ESONET‐NoE, EMSO-PP (Person et al., 2015), This study benefit from H2020 INFRADEV‐‐‐‐3‐‐‐‐ 2015 EMSODEV Project n°676555, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Data acquisition system development for EGIM on EMSODEV EU Project

  • García-Sánchez, Óscar
  • Dañobeitia, Juan José
  • Sorribas, Jordi
  • Casas, Raquel
  • Piera, Jaume
  • Bartolomé, Rafael
  • Bardají, Raúl
  • Nogueras, Marc
Garcia, O. ... et al.-- 7th International Workshop on Marine Technology – Martech Workshop 2016, 26-28 October 2016, Barcelona.-- 2 pages, 5 figures, The EMSODEV1 (European Multidisciplinary Seafloor and water-‐ column Observatory DEVelopment) is a UE project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). The EGIM module will measure various ocean parameters in a long-term consistent, accurate and comparable manner. These measurements are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. Here we present the current status of the EGIM data acquisition system development, This study benefited from H2020 INFRADEV- ‐3- ‐2015 EMSODEV Project n°676555, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SWE bridge: software interface for plug & work instrument integration into marine observation platforms

  • Martínez, Enoc
  • Toma, Daniel M.
  • Río, Joaquín del
  • García-Sánchez, Óscar
  • Bghiel, Ikram
7th International Workshop on Marine Technology – Martech Workshop 2016, 26-28 October 2016, Barcelona.-- 2 pages, 2 figures, The integration of sensor systems into marine observation platforms such as gliders, cabled observatories and smart buoys requires a great deal of effort due to the diversity of architectures present in the marine acquisition systems. In the past years important steps have been taken in order to improve both standardization and interoperability, i.e. the Open Geospatial Consortium’s Sensor Web Enablement. This set of standards and protocols provide a well-defined framework to achieve standardized data chains. However a significant gap is still present in the lower-end of the data chain, between the sensor systems and the acquisition platforms. In this work a standards-based architecture to bridge this gap is proposed in order to achieve plug & work, standardized and interoperable acquisition systems, We acknowledge the financial support from Spanish Ministerio de Economía y Competitividad under contract CGL2013- 42557-R INTMARSIS, the European Union’s NeXOS Project under contract nº 614102 and EMSODEV Project under contract n°676555, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

OGC SWE-based Data Acquisition System Development for EGIM on EMSODEV EU Project

  • Toma, Daniel M.
  • García-Sánchez, Óscar
  • Dañobeitia, Juan José
  • Sorribas, Jordi
  • Casas, Raquel
  • Piera, Jaume
  • Bartolomé, Rafael
  • Bardají, Raúl
Toma, D. ... et al.-- Proceedings of the Geospatial Sensor Webs Conference (GSW 2016), 29-31 August 2016, Münster, Germany.-- 5 pages, 7 figures, 1 table, The EMSODEV[1] (European Multidisciplinary Seafloor and water column Observatory DEVelopment) is an EU project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). This research infrastructure will provide accurate records on marine environmental changes from distributed local nodes around Europe. These observations are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. In this paper we present the design and development of the EGIM data acquisition system. EGIM is able to operate on any EMSO node, mooring line, sea bed station, cabled or non-cabled and surface buoy. In fact a central function of EGIM within the EMSO infrastructure is to have a number of ocean locations where the same set of core variables are measured homogeneously: using the same hardware, same sensor references, same qualification methods, same calibration methods, same data format and access, and same maintenance procedures, This study benefited from the H2020 INFRADEV‐3‐2015 EMSODEV Project n°676555, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

European Multidisciplinary seafloor and the Observatory of the water column for Development; The setup of an interoperable Generic Sensor Module

  • Dañobeitia, Juan José
  • García-Sánchez, Óscar
  • Bartolomé, Rafael
  • Sorribas, Jordi
  • Bardají, Raúl
  • Piera, Jaume
  • Marinaro, Giuditta
Dañobeitia, Juan José ... et al.-- American Geophysical Union Fall Meeting, 12-16 December 2016, San Francisco, European Multidisciplinary seafloor and the Observatory of the water column for Development (EMSODEV) is a Horizon-2020 UE project whose overall objective is the operationalization of eleven marine observatories and four test sites distributed throughout Europe, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. The whole infrastructure is managed by the European consortium EMSO-ERIC (European Research Infrastructure Consortium) with the participation of 8 European countries and other partner countries. Now, we are implementing a Generic Sensor Module (EGIM) within the EMSO ERIC distributed marine research infrastructure. Our involvement is mainly on developing standard-compliant generic software for Sensor Web Enablement (SWE) on EGIM device. The main goal of this development is to support the sensors data acquisition on a new interoperable EGIM system. The EGIM software structure is made up of one acquisition layer located between the recorded data at EGIM module and the data management services. Therefore, two main interfaces are implemented: first, assuring the EGIM hardware acquisition and second allowing push and pull data from data management layer (Sensor Web Enable standard compliant). All software components used are Open source licensed and has been configured to manage different roles on the whole system (52º North SOS Server, Zabbix Monitoring System). The acquisition data module has been implemented with the aim to join all components for EGIM data acquisition and server fulfilling SOS standards interface. The system is already achieved awaiting for the first laboratory bench test and shallow water test connection to the OBSEA node, offshore Vilanova I la Geltrú (Barcelona, Spain). The EGIM module will record a wide range of ocean parameters in a long-term consistent, accurate and comparable manner from disciplines such as biology, geology, chemistry, physics, engineering, and computer science, from polar to subtropical environments, through the water column down to the deep sea. The measurements recorded along EMSO NODES are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The module for ocean observatory data analysis of EMSO

  • Bardají, Raúl
  • Bartolomé, Rafael
  • Dañobeitia, Juan José
  • García-Sánchez, Óscar
  • Río, Joaquín del
  • Piera, Jaume
Association for the Sciences of Limnology and Oceanography (ASLO) Aquatic Sciences Meeting, Mountains of the Sea, 26 February - 3 March 2017, Honolulu, Hawai`i, The European Multidisciplinary Seafloor and water-column Observatory (EMSO) is a large-scale, distributed, Marine Research Infrastructure (RI). EMSO consists of ocean observation systems for long-term, high-resolution, (near) real-time monitoring of environmental processes including natural hazards, climate change, and marine ecosystems. EMSO observatory nodes are at key sites around Europe, from the Arctic to the Atlantic, through the Mediterranean, to the Black Sea. To analyse the EMSO data, we develop the Module for Ocean Observatory Data Analysis (MOODA). MOODA is a software with a Graphical User Interface (GUI) developed for scientists. The software helps to facilitate data access (mainly off-line) for further analysis by the scientific community. Some of the features the MOODA offers are: (1) Direct data access with complex query capabilities; (2) Data filtering methods based on metadata information; (3) Complex visualization tools; (4) Summary reports of the validated data generated from a specific query, including event annotations; (5) Specific data analysis tools for different scientific disciplines; (6) The system will be designed to be open, adaptable and scalable allowing future contributions from researchers and developers from all the disciplines associated to the EMSO observatories. The code is written in Python, and it is available on GitHub. MOODA aims to make informative plots as a central part of exploring and understanding data, Thanks to funding provided by H-2020 project EMSODEV (No 676555), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Oceanobs a python package to analyze data from marine observatories

  • Bardají, Raúl
  • Piera, Jaume
  • Bartolomé, Rafael
  • Dañobeitia, Juan José
  • García-Sánchez, Óscar
Oceans 2017, 18-21 September 2017, Anchorage, Alaska, USA.-- 6 pages, 6 figures, 4 tables.-- © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Data analysis tools easy to use plays a relevant role in the use of scientific measurements from marine observatory platforms. The huge amount of marine data with different formats needs methodologies that automatically analyze them with low human effort. This work presents oceanobs, an open-source Python package that provides a broad range of marine observatories data analysis procedures including feature extraction, quality control generation, filtering methods and content visualization. Here we present the philosophy of implementation of the package and we focus on the data Quality Control production, This workbenefited from the H2020 INFRADEV‐3‐2015 EMSODEV Project n° 676555, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

OBSEA, ten years of coastal ocean monitoring and test site observatory

  • Río, Joaquín del
  • Toma, Daniel M.
  • Martínez, Enoc
  • Masmitja, Ivan
  • Nogueras, Marc
  • Carandell, Matias
  • Gomáriz, Spartacus
  • Olivé Duran, Joaquim
  • Bardají, Raúl
American Geophysical Union (AGU) Fall Meeting, 9-13 December 2019, San Francisco, The study of the effects of climate change on the marine environment requires the existence of sufficiently long time series of key parameters. The study of these series allows, first, to characterize the range of variability in each particular region and, secondly, to detect trends or changes that could be attributed to anthropogenic causes. For that reason, permanent observation systems are required. Obsea is a permanent seabed cabled observatory located in Costas del Garraf area (Barcelona), deployed in 2009, that has produced a 10 years dataset of physical parameters now openly available at open repositories like Pangaea [1][2]. During such period, Obsea has became part of EMSO (The European Multidisciplinary Seafloor and water column Observatory) [3] as a test site where many marine instruments, technologies and data management protocols has been tested, included the EMSO-EGIM (EMSO Generic Instrument Module) and its data management system. Obsea is also contributing to the JERICO-RI coastal community [4], where is also contributing as a coastal observatory producing data and offering the infrastructure as a test site. As example of service, during the FP7 FixO3 project, Obsea was used during 828 days from 16-02-2015 to 31-08-2017, 150 days during the test of EGIM within the EMSODev project from 1-12-2016 to 30-4-2017 and during H2020 JERICO-Next project was used 518 days from 17-10-2017 to 21-05-2019. [1] J. del Río, “Obsea CTD 2009-2019,” 2019, 2019. [Online]. Available: https://doi.pangaea.de/10.1594/PANGAEA.902215. [Accessed: 01-Jul-2019]. [2] J. del Río, “Obsea Meteo 2010-2019,” 2019, 2019. [Online]. Available: https://doi.pangaea.de/10.1594/PANGAEA.903050. [Accessed: 01-Jul-2019]. [3] EMSO-Obsea, “EMSO-Obsea,” 2019. [Online]. Available: http://emso.eu/observatories-node/obsea/ . [Accessed: 01-Jul-2019]. [4] JERICO-RI, “JERICO-RI,” 2019. [Online]. Available: http://www.jerico-ri.eu/infrastructure-type/cabled-observatories/. [Accessed: 01-Jul-2019]. [5] D. Toma, “Data collected during the first deployment of the EMSO Generic Instrument Module (EGIM) at the OBSEA cabled observatory ” 2017. [Online]. Available: https://doi.pangaea.de/10.1594/PANGAEA.883072 Accessed: 01-Jul-2019], Authors acknowledge EMSO-Link and EMSODEV projects that have received funding from the European Union's Horizon 2020 research and innovaAon programme under grant agreements No 731036 and No 676555. The project OBSEA is also funded by the Spanish Ministry of Education and Science (MEC) with the project “Redes de sensores submarinos autónomos y cableados aplicados a la monitorizació nremota de indicadores biológicos” TEC2017-87861-R and by Generalitat de Catalunya "Sistemas de Adquisición Remota de datos y Tratamiento de la Información en el Medio Marino” (SARTI-MAR)” 2017 SGR 376
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The EGIM, EMSO generic instrument module, step towards standardization

  • Lanteri, Nadine
  • Legrand, Julien
  • Ruhl, H.A.
  • Blandin, Jérôme
  • Cannat, Mathilde
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gates, Andrew
  • Lagadec, Jean-Romain
  • Moreau, Bertrand
  • Pagonis, Paris
  • Sarradin, Pierre Marie
Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data acquisition system development for EGIM on EMSODEV EU Project

  • García Sánchez, Óscar
  • Dañobeita Canales, Juan José
  • Sorribas Cervantes, Jordi
  • Casas Muñoz, Raquel
  • Piera, Jaume
  • Bartolomé de la Peña, Rafael
  • Bardají Benach, Raúl
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Cadena Muñoz, Francisco Javier|||0000-0002-8960-9968
  • Toma, Daniel|||0000-0003-0472-1190
  • Bghiel, Ikram|||0009-0007-1576-8417
  • Martínez Padró, Enoc|||0000-0003-1233-7105
  • Nogueras Cervera, Marc|||0000-0001-7272-0128
The EMSODEV1 (European Multidisciplinary Seafloor and water-- column Observatory DEVelopment) is a UE project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). The EGIM module will measure various ocean parameters in a long-term consistent, accurate and comparable manner. These measurements are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. Here we present the current status of the EGIM data acquisition system development., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

European Multidisciplinary and Water-Column Observatory - European Research Infrastructure Consortium (EMSO ERIC): Challenges and opportunities for Strategic European Marine Sciences

  • Favali, P.
  • Dañobeita Canales, Juan José
  • Beranzoli, Laura
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
EMSO (European Multidisciplinary Seafloor and water-column Observatory, www.emso-eu.org) is a large-scale European Research Infrastructure I. It is a distributed infrastructure of strategically placed, deep-sea seafloor and water column observatory nodes with the essential scientific objective of real-time, long-term observation of environmental processes related to the interaction between the geosphere, biosphere, and hydrosphere. The geographic locations of the EMSO observatory nodes represent key sites in European waters, from the Arctic, through the Atlantic and Mediterranean, to the Black Sea (Figure 1), as defined through previous studies performed in FP6 and FP7 EC projects such as ESONET-CA, ESONET-NoE, EMSO-PP (Person et al., 2015)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The module for ocean observatory data analysis of EMSO

  • Bardají Benach, Raúl
  • Bartolomé de la Peña, Rafael
  • Dañobeita Canales, Juan José
  • García, Oscar
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Piera, Jaume
The European Multidisciplinary Seafloor and water-column Observatory (EMSO) is a large-scale, distributed, Marine Research Infrastructure (RI). EMSO consists of ocean observation systems for long-term, high-resolution, (near) real-time monitoring of environmental processes including natural hazards, climate change, and marine ecosystems. EMSO observatory nodes are at key sites around Europe, from the Arctic to the Atlantic, through the Mediterranean, to the Black Sea. To analyse the EMSO data, we develop the Module for Ocean Observatory Data Analysis (MOODA). MOODA is a software with a Graphical User Interface (GUI) developed for scientists. The software helps to facilitate data access (mainly off-line) for further analysis by the scientific community. Some of the features the MOODA offers are: (1) Direct data access with complex query capabilities; (2) Data filtering methods based on metadata information; (3) Complex visualization tools; (4) Summary reports of the validated data generated from a specific query, including event annotations; (5) Specific data analysis tools for different scientific disciplines; (6) The system will be designed to be open, adaptable and scalable allowing future contributions from researchers and developers from all the disciplines associated to the EMSO observatories. The code is written in Python, and it is available on GitHub. MOODA aims to make informative plots as a central part of exploring and understanding data.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OGC SWE-based Data Acquisition System Development for EGIM on EMSODEV EU Project

  • Toma, Daniel|||0000-0003-0472-1190
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Cadena Muñoz, Francisco Javier|||0000-0002-8960-9968
  • Bghiel, Ikram|||0009-0007-1576-8417
  • Martínez Padró, Enoc|||0000-0003-1233-7105
  • Nogueras Cervera, Marc|||0000-0001-7272-0128
  • García Sánchez, Óscar
  • Dañobeitia, Juan José
  • Sorribas Cervantes, Jordi
  • Casas Muñoz, Raquel
  • Piera, Jaume
  • Bartolomé de la Peña, Rafael
  • Bardají Benach, Raúl
The EMSODEV[1] (European Multidisciplinary Seafloor and water column Observatory DEVelopment) is an EU project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). This research infrastructure will provide accurate records on marine environmental changes from distributed local nodes around Europe. These observations are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. In this paper we present the design and development of the EGIM data acquisition system. EGIM is able to operate on any EMSO node, mooring line, sea bed station, cabled or non-cabled and surface buoy. In fact a central function of EGIM within the EMSO infrastructure is to have a number of ocean locations where the same set of core variables are measured homogeneously: using the same hardware, same sensor references, same qualification methods, same calibration methods, same data format and access, and same maintenance procedures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SWE bridge: software interface for plug & work instrument integration into marine observation platforms

  • Martínez Padró, Enoc|||0000-0003-1233-7105
  • Toma, Daniel|||0000-0003-0472-1190
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • García Sánchez, Óscar
The integration of sensor systems into marine observation platforms such as gliders, cabled observatories and smart buoys requires a great deal of effort due to the diversity of architectures present in the marine acquisition systems. In the past years important steps have been taken in order to improve both standardization and interoperability, i.e. the Open Geospatial Consortium’s Sensor Web Enablement. This set of standards and protocols provide a well -defined framework to achieve standardized data chains. However a significant gap is still present in the lower -end of the data chain, between the sensor systems and the acquisition platforms. In this work a standard s -based architecture to bridge this gap is proposed in order to achieve plug & work, standardized and interoperable acquisition systems., Award-winning
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The EGIM, EMSO generic instrument module, step towards standardization

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

European Multidisciplinary and Water-Column Observatory - European Research Infrastructure Consortium (EMSO ERIC): Challenges and opportunities for Strategic European Marine Sciences

  • Favali, P.
  • Dañobeita Canales, Juan José
  • Beranzoli, Laura
  • Río Fernández, Joaquín del
EMSO (European Multidisciplinary Seafloor and water-column Observatory, www.emso-eu.org) is a large-scale European Research Infrastructure I. It is a distributed infrastructure of strategically placed, deep-sea seafloor and water column observatory nodes with the essential scientific objective of real-time, long-term observation of environmental processes related to the interaction between the geosphere, biosphere, and hydrosphere. The geographic locations of the EMSO observatory nodes represent key sites in European waters, from the Arctic, through the Atlantic and Mediterranean, to the Black Sea (Figure 1), as defined through previous studies performed in FP6 and FP7 EC projects such as ESONET-CA, ESONET-NoE, EMSO-PP (Person et al., 2015)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SWE bridge: software interface for plug & work instrument integration into marine observation platforms

  • Martínez Padró, Enoc
  • Toma, Daniel
  • Río Fernández, Joaquín del
  • García Sánchez, Óscar
The integration of sensor systems into marine observation platforms such as gliders, cabled observatories and smart buoys requires a great deal of effort due to the diversity of architectures present in the marine acquisition systems. In the past years important steps have been taken in order to improve both standardization and interoperability, i.e. the Open Geospatial Consortium’s Sensor Web Enablement. This set of standards and protocols provide a well -defined framework to achieve standardized data chains. However a significant gap is still present in the lower -end of the data chain, between the sensor systems and the acquisition platforms. In this work a standard s -based architecture to bridge this gap is proposed in order to achieve plug & work, standardized and interoperable acquisition systems., Award-winning, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OGC SWE-based Data Acquisition System Development for EGIM on EMSODEV EU Project

  • Toma, Daniel
  • Río Fernández, Joaquín del
  • Cadena Muñoz, Francisco Javier
  • Bghiel, Ikram
  • Martínez Padró, Enoc
  • Nogueras Cervera, Marc
  • García Sánchez, Óscar
  • Dañobeitia, Juan José
  • Sorribas Cervantes, Jordi
  • Casas Muñoz, Raquel
  • Piera, Jaume
  • Bartolomé de la Peña, Rafael
  • Bardají Benach, Raúl
The EMSODEV[1] (European Multidisciplinary Seafloor and water column Observatory DEVelopment) is an EU project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). This research infrastructure will provide accurate records on marine environmental changes from distributed local nodes around Europe. These observations are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. In this paper we present the design and development of the EGIM data acquisition system. EGIM is able to operate on any EMSO node, mooring line, sea bed station, cabled or non-cabled and surface buoy. In fact a central function of EGIM within the EMSO infrastructure is to have a number of ocean locations where the same set of core variables are measured homogeneously: using the same hardware, same sensor references, same qualification methods, same calibration methods, same data format and access, and same maintenance procedures., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data acquisition system development for EGIM on EMSODEV EU Project

  • García Sánchez, Óscar
  • Dañobeita Canales, Juan José
  • Sorribas Cervantes, Jordi
  • Casas Muñoz, Raquel
  • Piera, Jaume
  • Bartolomé de la Peña, Rafael
  • Bardají Benach, Raúl
  • Río Fernández, Joaquín del
  • Cadena Muñoz, Francisco Javier
  • Toma, Daniel
  • Bghiel, Ikram
  • Martínez Padró, Enoc
  • Nogueras Cervera, Marc
The EMSODEV1 (European Multidisciplinary Seafloor and water-- column Observatory DEVelopment) is a UE project whose general objective is to set up the full implementation and operation of the EMSO distributed Research Infrastructure (RI), through the development, testing and deployment of an EMSO Generic Instrument Module (EGIM). The EGIM module will measure various ocean parameters in a long-term consistent, accurate and comparable manner. These measurements are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. Here we present the current status of the EGIM data acquisition system development., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The module for ocean observatory data analysis of EMSO

  • Bardají Benach, Raúl
  • Bartolomé de la Peña, Rafael
  • Dañobeita Canales, Juan José
  • García, Oscar
  • Río Fernández, Joaquín del
  • Piera, Jaume
The European Multidisciplinary Seafloor and water-column Observatory (EMSO) is a large-scale, distributed, Marine Research Infrastructure (RI). EMSO consists of ocean observation systems for long-term, high-resolution, (near) real-time monitoring of environmental processes including natural hazards, climate change, and marine ecosystems. EMSO observatory nodes are at key sites around Europe, from the Arctic to the Atlantic, through the Mediterranean, to the Black Sea. To analyse the EMSO data, we develop the Module for Ocean Observatory Data Analysis (MOODA). MOODA is a software with a Graphical User Interface (GUI) developed for scientists. The software helps to facilitate data access (mainly off-line) for further analysis by the scientific community. Some of the features the MOODA offers are: (1) Direct data access with complex query capabilities; (2) Data filtering methods based on metadata information; (3) Complex visualization tools; (4) Summary reports of the validated data generated from a specific query, including event annotations; (5) Specific data analysis tools for different scientific disciplines; (6) The system will be designed to be open, adaptable and scalable allowing future contributions from researchers and developers from all the disciplines associated to the EMSO observatories. The code is written in Python, and it is available on GitHub. MOODA aims to make informative plots as a central part of exploring and understanding data., Postprint (published version)