Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

GaAsN/GaAsSb superlattices as 1 eV layers for efficient multi-junction solar cells

  • Gonzalo Martín, Alicia
  • Utrilla, A. D.
  • Aeberhard, U.
  • Llorens, J. M.
  • Alén, B.
  • Braza, V.
  • Reyes, D. F.
  • González, D.
  • Fuertes Marrón, D.
  • Hierro, A.
  • Ulloa, J. M.
Proceedings of 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC), 10-15 Jun. 2018, Waikoloa, HI, USA, We demonstrate type-II GaAsSb/GaAsN superlattices as a suitable candidate to form a lattice-matched 1.01.15 eV subcell that could significantly improve the performance of multi-junction solar cells. The spatial separation of N and Sb allows better lattice-matching control, composition homogeneity, crystal quality and interface abruptness. Moreover, the type-II band alignment provides effective bandgap and radiative lifetime tunability through the period thickness. For the impact of period thickness on transport, quantum-kinetic simulations support the experimental finding of efficient carrier extraction at thicknesses up to 6 nm. All this leads to single-junction solar cells with improved efficiency under monochromatic illumination over the equivalent bulk devices., We acknowledge funding from the Spanish MINECO through projects MAT2016-77491 C2-1-R, TEC2015-64189-C3-2-R, CM S2013/MAE-2780 and EUIN-2017-88844, and from CSIC through project ICOOP 2017-COOPB20320. UA acknowledges funding by the European Comission through grant no. 676629 (project “EoCoE”). Support of the EU COST Action MP1406 “Multiscale in modelling and validation for solar photovoltaics (MultiscaleSolar)” is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Large eddy simulation for automotive aerodynamics with Alya

  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Chrysokentis, Georgios
  • Gomez, Samuel
  • Owen, Herbert
The prodigious potential offered by the ever-growing computing infrastructure is fostering the use of large eddy simulation for automotive aerodynamics. This approach, which resolves the larger dynamically important eddies and models only the smaller ones, provides significant improvement over RANS when there are important separated regions or transient phenomena such as noise generation. In the search for high fidelity LES solution Alya has recently undergone a significant transformation departing from the use of the Variational Multiscale approach and implicit temporal discretization. Nowadays, Alya has switched to an explicit temporal discretization, without any stabilization other than the pressure stabilization introduced by the fractional step scheme. When using a energy conserving discretization for the convective term together with an explicit turbulent model, numerical stabilization of the convective term in the Navier Stokes equations is not needed. The Vreman turbulence model is used in this work. For the simulation of high Reynolds number turbulent flows, such as those encountered in automotive applications, the use of wall modeling is mandatory with current computational resources. Significant improvements in the implementation of wall modeling for finite element methods proposed recently are tested in this work for highly complex geometries. Comparison of the numerical results for both the Ahmed and DrivAer bodies against experimental results from the literature shows that Alya can provide very accurate results.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Benefits of SMT and of Parallel Transpose Algorithm for the Large-Scale GYSELA Application

  • Latu, Guillaume
  • Bigot, Julien
  • Bouzat, Nicolas
  • Gimenez, Judit
  • Grandgirard, Virginie
This article describes how we manage to increase performance and to extend features of a large parallel application through the use of simultaneous multithreading (SMT) and by designing a robust parallel transpose algorithm. The semi-Lagrangian code Gysela typically performs large physics simulations using a few thousands of cores, between 1k cores up to 16k on x86-based clusters. However, simulations with finer resolutions and with kinetic electrons increase those needs by a huge factor, providing a good example of applications requiring Exascale machines. To improve Gysela compute times, we take advantage of efficient SMT implementations available on recent INTEL architectures. We also analyze the cost of a transposition communication scheme that involves a large number of cores in our case. Adaptation of the code for balance load whenever using both SMT and good deployment strategy led to a significant reduction that can be up to 38% of the execution times., This work was strongly supported by the Energy oriented Centre of Excellence (EoCoE), grant agreement number 676629, funded within the Horizon 2020 framework of the European Union. We gratefully acknowledge the POP project, that has also received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 676553. This work was possible due to the generous computational and software engineering supports from FZJ Juelich (Germany) and CCRT Bruyères- le-Châtel (France). The authors would also like to thank Chantal Passeron for assistance and for her precious help., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Large eddy simulation for automotive aerodynamics with Alya

  • Lehmkuhl Barba, Oriol
  • Chrysokentis, Georgios
  • Gomez, Samuel
  • Owen, Herbert
The prodigious potential offered by the ever-growing computing infrastructure is fostering the use of large eddy simulation for automotive aerodynamics. This approach, which resolves the larger dynamically important eddies and models only the smaller ones, provides significant improvement over RANS when there are important separated regions or transient phenomena such as noise generation. In the search for high fidelity LES solution Alya has recently undergone a significant transformation departing from the use of the Variational Multiscale approach and implicit temporal discretization. Nowadays, Alya has switched to an explicit temporal discretization, without any stabilization other than the pressure stabilization introduced by the fractional step scheme. When using a energy conserving discretization for the convective term together with an explicit turbulent model, numerical stabilization of the convective term in the Navier Stokes equations is not needed. The Vreman turbulence model is used in this work. For the simulation of high Reynolds number turbulent flows, such as those encountered in automotive applications, the use of wall modeling is mandatory with current computational resources. Significant improvements in the implementation of wall modeling for finite element methods proposed recently are tested in this work for highly complex geometries. Comparison of the numerical results for both the Ahmed and DrivAer bodies against experimental results from the literature shows that Alya can provide very accurate results., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benefits of SMT and of Parallel Transpose Algorithm for the Large-Scale GYSELA Application

  • Latu, Guillaume
  • Bigot, Julien
  • Bouzat, Nicolas
  • Gimenez, Judit
  • Grandgirard, Virginie
This article describes how we manage to increase performance and to extend features of a large parallel application through the use of simultaneous multithreading (SMT) and by designing a robust parallel transpose algorithm. The semi-Lagrangian code Gysela typically performs large physics simulations using a few thousands of cores, between 1k cores up to 16k on x86-based clusters. However, simulations with finer resolutions and with kinetic electrons increase those needs by a huge factor, providing a good example of applications requiring Exascale machines. To improve Gysela compute times, we take advantage of efficient SMT implementations available on recent INTEL architectures. We also analyze the cost of a transposition communication scheme that involves a large number of cores in our case. Adaptation of the code for balance load whenever using both SMT and good deployment strategy led to a significant reduction that can be up to 38% of the execution times., This work was strongly supported by the Energy oriented Centre of Excellence (EoCoE), grant agreement number 676629, funded within the Horizon 2020 framework of the European Union. We gratefully acknowledge the POP project, that has also received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 676553. This work was possible due to the generous computational and software engineering supports from FZJ Juelich (Germany) and CCRT Bruyères- le-Châtel (France). The authors would also like to thank Chantal Passeron for assistance and for her precious help., Peer Reviewed, Postprint (author's final draft)