Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Feasability of Bluetooth 5.0 connectionless communications for I2V applications

  • García Ortíz, Juan Carlos
  • Ponce Tortajada, Rubén
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Vehicle communications are one of the pillars of the development of Intelligent Transport Systems. This is a complex scenario, where several types of entities interact with each other, using a range of communication infrastructure. In this area there are several applicable technologies, with different advantages and disadvantages. Therefore, flexible and ubiquitous communication, capable of using any communication type, will allow Smart vehicles to use the most appropriate one to improve traffic movement systems. Although the use of Bluetooth has been considered in this field, it has normally been done in intra-vehicle communications, or if it has been done outside this field, for inter-vehicle communications, it has been done based on standard 4.2 or earlier versions. The Bluetooth BLE 5.0 standard has features that allow the use of this technology in previously unimaginable scenarios; in particular, the increase in range, and greater robustness in communications allowing the analysis of its use as an infrastructure to vehicle network. The preliminary results obtained demonstrate this viability and the potential of this technology in this field, This work has been supported by the project PRYSTINE which has received funding within the Electronic Components and Systems for European Leadership Joint Undertaking (ECSELJU) in collaboration with the European Union¿s H2020 Framework Programme and National Authorities, under grant agreement No. 783190, and from the ¿Instituto Valenciano de Competitividad Empresarial" ¿ IVACE. It has also been funded by the MCyU (Spanish Ministry of Science and Universities) under the project ATLAS (PGC2018-094151-B-I00), which is partially funded by AEI, FEDER and EU
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Framework for motion prediction of vehicles in a simulation environment

  • Medina Lee, Juan Felipe
  • Trentin, Vinicius
  • Villagra, Jorge
[Abstract] Efficient testing and validation of software components for highly automate vehicles is one of the key challenges to be solved for their massive deployment. The number of driving situation and environment variables makes validation almost intractable with real vehicles in open roads, and the testing reproducibility can only be achieved via simulation. This manuscript presents a framework and preliminary results for motion prediction of vehicles in a simulation environment that is being currently developed by the AUTOPIA Program., Ministerio de Ciencia, Innovación y Universidades; DPI2017-86915-C3-1-R, Comunidad de Madrid; S2018-EMT-4362
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

PRYSTINE - Technical Progress After Year 1

  • Druml, Norbert
  • Veledar, Omar
  • Macher, Georg
  • Stettinger, Georg
  • Selim, Solmaz
  • Reckenzaun, Jakob
  • Díaz, Sergio E.
  • Marcano, Mauricio
  • Villagrá, Jorge
  • Beekelaar, Rutger
  • Jany-Luig, Johannes
  • Corredoira, Marta María
  • Burgio, Paolo
  • Ballato, Christian
  • Debaillie, Björn
  • Meurs, Lars van
  • Terechko, Andrei
  • Tango, Fabio
  • Ryabokon, Anna
  • Anghel, Andrei
  • Icoglu, Oguz
  • Kumar, Sumeet S.
  • Dimitrakopoulos, George
Among the actual trends that will affect society in the coming years, autonomous driving stands out as having the potential to disruptively change the automotive industry as we know it today. For this, fail-operational behavior is essential in the sense, plan, and act stages of the automation chain in order to handle safety-critical situations by its own, which currently is not reached with state-of-the-art approaches also due to missing reliable environment perception and sensor fusion. PRYSTINE will realize Fail-operational Urban Surround perceptION (FUSION) which is based on robust Radar and LiDAR sensor fusion and control functions in order to enable safe automated driving in urban and rural environments. In this paper, we detail the vision of the PRYSTINE project and we showcase the results achieved during the first year., The authors would like to thank all national funding authorities and the ECSEL Joint Undertaking, which funded the PRYSTINE project under the grant agreement n° 783190., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Machine learning based motion planning approach for intelligent vehicles

  • Artuñedo, Antonio
  • Corrales, Gabriel
  • Villagrá, Jorge
  • Godoy, Jorge
The complexity to handle complex situations in automated driving requires increasing computational resources. In this work, we propose a machine learning approach for motion planning aiming at optimizing the set of path candidates to be evaluated in accordance with the driving context. Thus, the computation cost of the whole motion planning strategy can be reduced while generating safe and comfortable trajectories when required. The proposed strategy has been implemented in a real experimental platform and validated in different operating environments, successfully providing high quality trajectories in a small time frame., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Programme, and by the European Commission through the Project PRYSTINE (ECSEL-783190-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Framework for motion prediction of vehicles in a simulation environment

  • Medina-Lee, Juan Felipe
  • Trentin, Vinicius
  • Villagrá, Jorge
Efficient testing and validation of software components for highly automate vehicles is one of the key challenges to be solved for their massive deployment. The number of driving situation and environment variables makes validation almost intractable with real vehicles in open roads, and the testing reproducibility can only be achieved via simulation. This manuscript presents a framework and preliminary results for motion prediction of vehicles in a simulation environment that is being currently developed by the AUTOPIA Program., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018- EMT-4362) Programme, and by the EuropeanCommission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL783119-2)., Peer reviewed