Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Miniaturized Ultra-Wideband Bandpass Filter Based on Substrate Integrated Quasi-Lumped Resonators

  • Messaoudi, El Mehdi
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A compact ultra-wideband bandpass filter employing substrate integrated quasi-lumped resonators is presented in this paper. A multi-layer hybrid structure is proposed, combining quasi-lumped resonators and surface mount components. This allows a huge miniaturization degree due to the high capacitive loading. Moreover, strong magnetic and electric couplings can be implemented thus enabling the introduction of transmission zeros for improving response selectivity. A filter example centered at 5.35 GHz with a prescribed channel bandwidth of 2.9 GHz has been designed, manufactured and measured. The filter size is smaller than 7×7 mm2. The obtained results show the feasibility of the proposed approach., This project has received funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 811232, the European Space Agency (ESA) under contract 4000124983, and the Ministerio de Ciencia e Innovación (Spanish Government) under project PID2019-103982R-C41
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis and design of re-configurable combline filters using dielectric tuners

  • Sharma, Abhishek
  • Guglielmi, Marco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This article describes different tunable structures for typical waveguide combline filters. In this context, several configurations using dielectric tuners have been studied for resonators, inter-resonator couplings, and input/output couplings. All configurations are analyzed in a wide frequency range showing advantages and drawbacks. Using the best structures in terms of performance, a fully re-configurable filter has been designed. The filter provides a wide tuning range in terms of center frequency while maintaining a high Q factor, and a constant bandwidth and return losses. A first filter prototype has been designed at L-band. The structure demonstrates a tunability in terms of frequency range of about 400 %, thereby clearly demonstrating that the approach we propose is indeed a very promising candidate for implementing tunable combline filters based on dielectric tuners.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Multipactor breakdown analysis of Ku-band meandered low-pass filter

  • Sami, Abdul
  • Teberio Berdún, Fernando
  • Arnedo Gil, Israel
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arregui Padilla, Iván
In this work, a very compact rectangular waveguide low-pass filter with meandered topology based on commensurate lines for Ku-band satellite applications is analysed for high-power handling capabilities. The device consists of rectangular waveguide sections properly cascaded to form a meandered topology to obtain the desired value of the local reflection coefficients. which are essential to achieve the target frequency response and also to keep large mechanical gaps. Hence, this technique allows us not only to design a filter with compact size but a filter geometry which is suitable for high power applications. In the paper, the low-pass filter based on commensurate lines is first designed by cascading E-plane mitered bends (±90° EMBs) in CST Microwave Studio (MWS) and then the values of the electromagnetic fields at the passband frequencies are exported to Spark3D to perform a multipactor analysis. The critical areas inside the device where the multipactor discharge occurs will also be identified in the high-power analysis., This work was supported by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53 and by the European Union’s Horizon 2020 Research and Innovation Program under Grant 811232-TESLA-H2020-MSCA-ITN-2018.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Improvement of corona breakdown threshold (peak power handling) in smooth-profiled microstrip filters

  • Ahmad, Jamil
  • Hussain, Jabir
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Arnedo Gil, Israel
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
Trabajo presentado al International Workshop on Multipactor, Corona and Passive Intermodulation (MULCOPIM), Valencia, Spain, 19-21 October 2022 (Session 08), In this paper, the PPHCs of two filter design techniques, stepped-impedance (SI) and smooth-profile (SP), are presented for four design prototypes. Smooth-profiled filters feature smooth variations in the characteristic impedance profile, avoiding sharp edges, which accumulate electric fields. The absence of sharp edges in SP reduces the voltage magnification factor, which in turn improves the PPHC of the filter. The phenomenon of electric fields accumulation at the sharp corners of the SI filters is presented and compared with smooth transitions in SP filters. Furthermore, 1D graphs of electric field intensity are presented along the strip contour of the microstrip lines. Finally, SPARK3D results clearly demonstrate that SP filters can handle higher peak powers than their SI counterparts between critical pressure and ambient pressure, for all the studied designs., This work was supported by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53 and by the European Union's Horizon 2020 Research and Innovation Program under Grant 811232-TESLA-H2020-MSCA-ITN-2018. Jamil Ahmad also acknowledges the funding received through the PRE2018-085491 grant.