Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A novel inlet boundary condition for VOF-DNS simulations of the primary breakup of prefilming airblast atomizers

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, Carlos
[EN] Prefilming airblast atomizers are becoming widely used in state-of-the-art aero engines. The planar configuration experimentally studied by the Karlsruhe Institute of Technology (KIT) has been computationally replicated by different research groups through both Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS). The present investigation reports the use of a novel inlet boundary condition for the DNS study of prefilming airblast atomization that allows accounting not only for the inflow turbulence but also for the temporal evolution of the liquid film thickness at the DNS inlet. The methodology implies the resolution of subsequent singlephase LES, two-phase flow LES and two-phase flow DNS. The former simulations are solved by using the interFoam solver from the OpenFoam toolbox, whereas the latter is computed with the PARIS open-source code. Results for a widely known operating condition show a different degree of atomization when the liquid film thickness evolution is accounted for than the one obtained through the use of a constant liquid film thickness at the domain inlet., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under European Union¿s Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. We acknowledge PRACE for awarding us access to computational resources on JOLIOT CURIE-AMD at GENCI@CEA, France (proposal 2019204944). Support given to Carlos Moreno by Universitat Politècnica de València through the ¿FPI-Subprograma 2¿ grant within the ¿Programa de Apoyo para la Investigación y Desarrollo (PAID-01-19)¿ is acknowledged. We must thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. We also thank Achille Schmitter, Hugo Martínez and Lucas González for help processing the 1-phase LES, 2-phase LES and DNS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Combustion modeling in a pressurized gas turbine burner using Large-Eddy Simulations

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Both, A.
  • Mira, D.
The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418. The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM-2020-3-0022, IM-2021-1-0016).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Development of the conditional moment closure with a multi-code approach in the frame of Large Eddy Simulations

  • Pérez Sánchez, Eduardo Javier|||0000-0002-5056-415X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Houzeaux, Guillaume|||0000-0002-2592-1426
The Conditional Moment Closure (CMC), devised for turbulent combustion modelling, was implemented in the multiphysics code Alya, based on the Finite Element Method (FEM), in the frame of Large Eddy Simulations (LES) for unstructured meshes. A multi-code approach has been developed to run separately the transport equations for non-reacting variables (CFD) and the conditioned quantities (CMC) in two different meshes. The fundamental aspects of the algorithm are discussed while a new strategy for the interpolation between CFD and CMC meshes is described. The Cambridge swirling burner is analysed and simulations results are compared to measurements., The research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under the ESTiMatE project, grant agreement No 821418., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Development of the conditional moment closure with a multi-code approach in the frame of Large Eddy Simulations

  • Pérez Sánchez, Eduardo Javier
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
  • Houzeaux, Guillaume
The Conditional Moment Closure (CMC), devised for turbulent combustion modelling, was implemented in the multiphysics code Alya, based on the Finite Element Method (FEM), in the frame of Large Eddy Simulations (LES) for unstructured meshes. A multi-code approach has been developed to run separately the transport equations for non-reacting variables (CFD) and the conditioned quantities (CMC) in two different meshes. The fundamental aspects of the algorithm are discussed while a new strategy for the interpolation between CFD and CMC meshes is described. The Cambridge swirling burner is analysed and simulations results are compared to measurements., The research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under the ESTiMatE project, grant agreement No 821418., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed, Postprint (published version)