Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Measurements, simulation, analysis and geolocation in a digital twin tool for bridge management

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
  • Tomar, Rahul
  • Martínez de la Rosa, Christian
  • Stipanovic, Irina
This paper presents a digital-twin based tool that can be used for bridge management. The tool offers various capabilities that include embedding BIM geometries, simulations, measurements, GIS location, and performance analysis. These features enable efficient and effective management of bridges by providing detailed information and analysis of the bridge's performance, which can help in identifying potential issues and implementing appropriate solutions. The methodology represents one of the outcomes of Ashvin, an H2020 project aimed to providing assistant solution for design, construction and management of infrastructure systems. The hitherto obtained findings include this digital tool which can be of practical and beneficial use for bridge owners and operators, as it can help them to organize and centralize the bridge data in a way it helps making informed decisions regarding the maintenance, repair, and replacement of bridges. Overall, this paper highlights the importance of embracing technology in the management of critical infrastructure such as bridges, which can significantly improve their performance and extend their lifespan., European Commission. Grant Number: 958161, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Ground-Based interferometer radars for load tests of long-span arch bridges. Case study: Almonte and El Tajo Viaducts, Extremadura, Spain

  • Rodriguez Gonzalez, Alejandro
  • Fuente, Jose Vicente
  • Fabregad, Roberto
  • Alvarez, Juan
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
This paper depicts the deployment of Ground-Based Interferometer Synthetic Aperture Radars for obtaining displacements and accelerations of El Tajo and Almonte Viaducts during their routine load tests. These Viaducts belong to the Highspeed Railway Network between Madrid and Badajoz, which represents a strategic infrastructure in Spain. Both Viaducts are concrete arches whose size as well as whose height over the reservoir posed a tremendous challenge for obtaining proper field data using traditional devices. The paper shows the gathered experience on the use of this technique for subsequent routine load tests., Jose Vicente Fuente Acknowledges the support ot the program Torres y Quevedo (PTQ). R. Chacón and C. Ramonell acknowledge the funding of Ashvin, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” a H2020 project under agreement 958161. All authors are grateful to ADIF for the invaluable collaboration and openness during the execution of the load tests vis-à-vis all research performed within the railway network premises., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Encompassing measurements, advanced analysis and BIM for Digital Twinning of steel structures

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
  • Sierra, Pablo Leonel|||0000-0001-6440-2832
  • Clarés Garcia, Antoni|||0009-0001-9054-2705
With advanced analysis techniques, such as FE-analysis and computational modeling, engineers gain deeper insights of the behavior of steel structures. On the other hand, established technologies, such as sensors, cameras, or laser scanners, offer new ways to measure and monitor the behavior of structural systems with unprecedented accuracy and ease of data use. By deploying these devices strategically, engineers can capture critical data points providing understanding of structural behavior, condition and performance. Moreover, Building Information Modelling methods and their evolutionary transition to twins provide collaborative arenas for the integration of virtual representations together with physical and characteristics of a structure. These representations facilitate visualization, coordination, and communication throughout the construction lifecycle. Encompassing advanced analysis, measurements, and BIM represents the core concept of a multilayered digital twin presented in this paper. This paper presents a discussion on this concept through the lens of steel structures design using advanced analysis, data integration and interoperability. Some developments related to educational steel structures twins are also described., Authors acknowledge the funding of research projects based on Digital Twins for the Built Environments. Respectively, DI-2021, as part of the Industrial PhD program on Doubly Curved Digital Twins and “Ashvin- Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” as an H2020 project under agreement 958161 that provides access to two demonstrators depicted in the paper.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Platology: a digital twin ontology suite for the complete lifecycle of infrastructure

  • Khan, Rehan
  • Tomar, Rahul
  • Hartmann, Timo
  • Ungureanu, Lucian
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ibrahim, Ahmed
The construction industry will have to present compelling solutions to achieve the UN Societal Development Goals (SDG). A digital twin has the potential to revolutionize the design, construction, and performance of civil infrastructure assets across the environment. This paper proposes an ontology mapping the physical objects with required attributes aiming to augment built infrastructured evelopment throughout their complete lifecycle in the context of cyber-physical synchronicity of the digital twin paradigm. This research is conducted within the framework of the H2020 project ASHVIN, aiming to develop a real-time Digital Twin for the Design, Construction, and Operation phase of the infrastructure. The proposed “Platology” ontology suite will encompass physical assets and processes of an infrastructure’s lifecycle and the possibility for accurate version, configuration, and state management to form a bidirectional communication path between the physical and the virtual., This research project is funded under the European Union’s program Horizon 2020 research and innovation programme under grant agreement no 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

MatchFEM: a computational design assistant tool for digital twins of buildings and infrastructure

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
Digital Twins (DT) has gained traction in recent years, offering significant potential to centralize design, construction and operation processes, improve management, and support decision-making. However, implementing DTs in the AECO sector involves managing various technologies and software, leading to increased complexity for professionals. This paper presents MatchFEM, a tool designed to simplify data generation for DTs within a unified environment. Developed as a plug-in for Grasshopper Computational Design (CD) software, MatchFEM facilitates 4D IFC-BIM modelling, IoT monitoring, data processing, and Structural Analysis models generation, key components of DTs. A case study is included to demonstrate its functionality and potential benefits., All authors acknowledge the funding of the ASHVIN project, a European Union’s Horizon 2020 research and innovation programme under grant agreement No 958161. Héctor Posada acknowledges the Foundation for the Future of Colombia (COLFUTURO), for the financial support. Carlos Ramonell acknowledges the funding of the FI-2021 AGAUR PhD grant and Rolando Chacón acknowledges the funding of the DI-101 2021 AGAUR Industrial Doctorate Program as well as PONT3, Grant PID2021-124236OB funded by MCIU/AEI/10.13039/501100011033 and by “ERDF/EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seasonal analysis of a 846 long steel box girder bridge using Terrestrial Laser Scanners (TLS) and FE-models

  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
This investigation presents the seasonal analysis of an 846 long steel box girder bridge using Terrestrial Laser Scanners (TLS) and FE-models. The Bridge is both vertically and horizontally curved with a tapered, stiffened steel box girder. The sequential seasonal measurement of the plates using a TLS provides a set of point clouds that can be systematically used to feed advanced inelastic FE analysis. Since the bridge experiences considerable seasonal displacements, the effect of these displacements on the ultimate load capacity of the composite bridge is under study. In the FE-analysis, comparisons between defining imperfections of the plates as adequately scaled Eigenshapes or, as real measurements, are performed. Different scenarios (seasonal and shape- related) are thus assessed. In addition, another challenge in this investigation is to digitize realistically and seasonally the “as built” shape of the plates. The definition of the resulting 3D geometry must be versatile enough to be used by different stakeholders (simulation, BIM managers, IoT). The outcome of this pipeline of information covering measurement-FE-analysis and assessment is of great interest to maintenance managers. Understanding the seasonal geometrical configuration of this bridge may represent an accurate starting point for subsequent forecasting of structural engineering scenarios., Authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. In Addition, the authors are grateful to BAGH Técnica and MITMA for providing access to the bridge for measurements, data collection as well for their disposition to share project information and follow the development of this research., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

MATCHFEM: A Tool for automating steel structures digital design for construction and digital life.

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Posada Carcamo, Hector
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
The digitization of construction processes is advancing at a rapid pace, with Building Information Modeling (BIM) methodologies playing a central role. The integration of these technologies provides an efficient and reliable project execution. Steel struc- tures, characterized by their standard elements, lend themselves well to industrial- ization and precision in construction. BIM methodologies are particularly effective in these scenarios, offering opportunities for improved life cycle analysis through en- hanced traceability of components. This approach leads to a more sustainable and optimized design and construction process. The use of parametric design tools in steel structures is becoming increasingly common, allowing for greater optimization of structural components design. By embedding measurements and data within BIM models, additional layers of information can be integrated, further enhancing struc- tural control and management throughout the project's life cycle. This paper intro- duces MatchFEM, a tool designed to integrate multiple layers of information for structural design and control within a computational geometry platform. MatchFEM interconnects geometries, incorporates sensors, numerical models, and various ap- plications to optimize the design and monitoring of steel structures. Case studies for structural elements showcase the tool's capabilities and effectiveness, This paper was prepared in the context of Ashvin, a EUH2020 RIA. In addition, improvements of the tool have been added within the context of the DI-101 2021 AGAUR Industrial Doctorate Program Doubly-curve surfaces through a digital twin. Hector Posada acknowledges the financial support provided by DI-101 2021 AGAUR for plugin refinements., Peer Reviewed, 9 - Indústria, Innovació i Infraestructura, 8 - Treball Decent i Creixement Econòmic
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the digital twinning of routine load tests in railway bridges. Case study: high speed railway network, Extremadura, Spain

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Posada, Hector
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Sierra, Pablo Leonel|||0000-0001-6440-2832
  • Rodriguez Gonzalez, Alejandro
  • Koulalis, Ilias
  • Ioannidis, Kostas
  • Vrochidis, Stefanos
  • Tomar, Rahul
  • Freitag, Sebastian
  • Wagmeister, Stefan
  • Teodorovic, Mirko
This paper shows the developments on the digital twinning of a set of new High speed Railway bridges located in South Western Spain. The aim of this digitization is the generation of a twin-driven maintenance planning. This research is performed within the frame of a H2020 European project called ASHVIN, related to the use of Digital Twins for Design, Construction and Maintenance purposes within the AEC sector. The project provides a series of demo cases for all stages. One of the demo cases is a series of new bridges belonging to a high speed train network in Extremadura, Spain. The demo case is aimed at establishing sensor-based and image-based requirements, procedures and examples for the generation of realistic virtual replica of the physical bridges. The twins are deemed to as living assets that can be updated during operation. The paper depicts actions and deployments undertaken during the routine static load tests. The efforts related to sensoring, simulation, modelling, assessment and validation can be wrapped up systematically for further use during regular operation of the asset., All authors acknowledge the funding of Ashvin, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” a H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Material characterization for HBIM data structures on a masonry arch bridge

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
  • Pelà, Luca|||0000-0001-7760-8290
  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Gönen, Semih|||0000-0002-9588-4552
  • Cabané Cañas, Albert|||0000-0002-5858-2563
This paper presents a set of undertaken actions for characterizing masonry arch bridges using data structure suitable for proper embedment in Digital Twins and Heritage Building Information Modelling (HBM). Interfaces in bridge maintenance are relentlessly and increasingly sophisticated. For both new and existing bridges, these interfaces are tending towards their ability to deal with different sources of information. Comprehensive digital twins of heritage masonry arch bridges may include several sources of information gathered from the real asset. Measurements can be taken using many different techniques ranging from contact to contactless and from non-destructive to moderately destructive samples. In addition, these twins may base upon different numerical models aimed at predicting and anticipating the present and future behaviors of the asset, respectively. Masonry arch bridges are known for their complex material and structural characteristics. Digitizing these masonry properties is key for effective simulation and analysis, often involving homogenization of diverse material properties. The design of comprehensive information constructs able to store and federate multiple data layers within a single entity is still challenging. Layers must be connected using vast scoped solutions such as knowledge graphs, integrating measurements, simulations and other information sources. In this particular case study on a masonry arch bridge located in Catalonia, Spain, in-situ Non-Destructive Testing (NDT) data is conceptualized for proper infusion within HBIM schemas. This integration pursues a seamless information flow for analysis or predictive purposes., The financial support from the Ministry of Science and Innovation (Spain), the State Agency of Research, and the European Regional Development Fund (ERDF) through the project PONT3 (PID2021-124236OB-C32). Authors also acknowledge the #KPI50 initiative of Ashvin, an H2020 project under agreement 958161 for the complementary support to the development of twinning techniques in new sites. The fifth author acknowledges the financial support of the European Union – NextGeneration EU through the postdoctoral grant Margarita Salas., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

I-Twin. Computational twin connectors for I-profiles: towards unforeseen interoperability of digital tools

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
Standard BIM data-exchange format requirements are permeating Building Construction. This is due to the increasing digital communication between Stakeholders of complex projects. All steps of development (conception, design, procurement, construction and operation) are pushing towards integration of data schemas. Desirably, knowledge and value generated by one stakeholder may then be leveraged by other stakeholders. 3D models, simulations, measurements, logbooks, schedules, as-built conditions and other information constructs are on the verge of interoperable communication. Structural Analysis must play a significant role within those more digitized data exchanges. This paper presents recent developments of frameworks, connectors and tools for the integration of structural I-shaped beam entities into Digital Twins. The information construct I-Twin encompasses information loads for geometries (IFC-Based), sensors (IoT) and simulations (FEM)., Authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. This publication reflects only authors' view and that the European Commission is not responsible for any uses that may be made of the information it contains., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Geometrical digital twinning of a tapered, horizontally curved composite box girder bridge

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Puig i Polo, Càrol|||0000-0002-8820-6446
  • Mirambell Arrizabalaga, Enrique|||0000-0003-2612-9104
A composite bridge located in the Metropolitan Area of Barcelona represents one of the sites for demonstrating the capabilities of digital twins on maintenance of built assets. Digital twins can be deemed to as digital living replica of the physical one that provides real time information throughout adequate connectivity (sensors, images, remote sensing) and provides automated visualization of the asset for decision-making purposes (performance indicators that are assessed regularly). This demonstrator is an 846 meters long composite bridge with plates and a concrete slab. The plates are tapered along a portion of its length. The bridge is horizontally curved with a bifurcation at its end. One of the challenges in this demonstrator is to reproduce realistically the “as built” shape of the plates using a terrestrial laser scanner for simulation purposes. The outcome of this specific side of the digital twinning (other sides also include many sensor- and image-based methods) is of great interest for maintenance managers. Understanding the real configuration of the asset represents an accurate starting point for subsequent modelling., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Real-time activity duration extraction of crane works for data-driven discrete event simulation

  • Jungmann, Manuel
  • Ungureanu, Lucian
  • Hartmann, Timo
  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
The construction industry is struggling with low productivity rates because of a low level of digitalization, dynamic interactions, and uncontrollable circumstances on sites, which make the planning process complex. Usage of the digital twin construction paradigm enables to facilitate construction management and leverage the sector’s unexploited potential. This research addresses current shortcomings by real-time discrete event simulation. During crane operations, kinematic data were collected, which were classified by machine learning algorithms for activity recognition and duration extraction. Based on the identified durations, Goodness-of-Fit techniques determined suitable probability density functions. The resulting probability density functions were used as input parameters in stochastic discrete event simulations. It was shown that with enriched data collection, probability density functions have to be updated. The data-driven discrete event simulation facilitates decision-making processes by providing more reliable real-time information for the planning of upcoming construction works. Thus, data-based instead of experience-based management can be enabled., Part of this research has been conducted for the H2020 funded project ASHVIN, Grant Number: 958161. The authors are grateful to BIS structures, BCA, DRAGADOS, and FREO for providing access to construction site and for sharing project information.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Automated pipeline for the analysis of a scale-reduced steel cable net

  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Krenn, Burkhard
  • Puig i Polo, Càrol|||0000-0002-8820-6446
This paper proposes a digitally twinned experimental analysis of a scale-reduced laboratory-sized steel cable net subjected to vertical loading. The test is aimed at establishing automated pipelines of information and analysis between the measurements (displacements of nodes) and the numerical model of the cable net, which are seamlessly interconnected through a BIM model. These automated pipelines erect the frame of the development of a digital twin of the cable net with structural analysis purposes. For the sake of measurements, a terrestrial laser scanner is used. Displacements of the nodes are extracted using computational geometry tools. For the sake of analysis, a data-based numerical model is proposed to obtain the tensile state of the cables. Precisely understanding the force distribution along nets is a challenge at design, construction and operation stages. This research belongs to a vaster project related to the development of automated pipelines of information for European infrastructure in the form of digital twins. The outcome of this laboratory test results is of great use when developing similar automated pipelines of information in real sites including cable nets in roofs., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Closing the gap between concrete maturity monitoring and nonlinear time-dependent fem analysis through a digital twin. Case study: post-tensioned concrete slab of an office building, Barcelona, Spain

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ungureanu, Lucian
  • Garcia Carrera, David|||0000-0002-5907-2469
This paper proposes a pipeline for the automation of data between two realms: i) simulation, in a fully nonlinear, and time-dependent structural analysis model and, ii)concrete maturity monitoring data from the construction site. The connection enables an information construct understood for its use within the Digital Twin of the building during construction phases. The pipeline requires a comprehensive coordination between stakeholders at both the site (Construction) and the structural control office, which is challenging. The pipeline consists of a) temperature sensors, b) a mobile app connected to the sensor via Bluetooth with basic instructions for datagatherers, c) integration and interoperability of BIM, and, d) an advanced Finite Element (FE) model. By measuring the concrete temperature during many days, realistic concrete mechanical properties are inferred and infused into the FE models using adequate calibration. Two applications for the improvement of construction activities are identified. Formwork striking and tendons stressing. The paper describes the testbed of all the connections, for the construction of an in-situ casted concrete building in Barcelona, Spain., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtu-al Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. In Addition, the authors are grateful to BIS structures, BCA, DRAGADOS, and FREO for providing access to the construction site for measurements and data collection, as well for their disposition to share project information and follow the development of this research., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Towards automated pipelines for processing load test data on a hs railway bridge in Spain using a digital twin

  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
This document presents an automated pipeline to process sensor-based data produced during load tests on digitally twinned HS railway bridges. The research is developed within the frame of the H2020 European project ASHVIN, related to Assistants for Healthy, Safe, and Productive Virtual Construction, Design, Operation & Maintenance using Digital Twins. The pipeline is developed within a digital twin application based on event-driven microservices, which integrates the ASHVIN IoT platform, the IFC building information model and an array of services dedicated to automating processes performed during the operation stage of structural assets. A load test carried out on a bridge located on a HS railway in Spain is used as a demonstrator., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the digital twinning of routine load tests in railway bridges. Case study: high speed railway network, Extremadura, Spain

  • Chacón Flores, Rolando Antonio
  • Posada, Hector
  • Ramonell Cazador, Carlos
  • Sierra, Pablo Leonel
  • Rodriguez Gonzalez, Alejandro
  • Koulalis, Ilias
  • Ioannidis, Kostas
  • Vrochidis, Stefanos
  • Tomar, Rahul
  • Freitag, Sebastian
  • Wagmeister, Stefan
  • Teodorovic, Mirko
This paper shows the developments on the digital twinning of a set of new High speed Railway bridges located in South Western Spain. The aim of this digitization is the generation of a twin-driven maintenance planning. This research is performed within the frame of a H2020 European project called ASHVIN, related to the use of Digital Twins for Design, Construction and Maintenance purposes within the AEC sector. The project provides a series of demo cases for all stages. One of the demo cases is a series of new bridges belonging to a high speed train network in Extremadura, Spain. The demo case is aimed at establishing sensor-based and image-based requirements, procedures and examples for the generation of realistic virtual replica of the physical bridges. The twins are deemed to as living assets that can be updated during operation. The paper depicts actions and deployments undertaken during the routine static load tests. The efforts related to sensoring, simulation, modelling, assessment and validation can be wrapped up systematically for further use during regular operation of the asset., All authors acknowledge the funding of Ashvin, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” a H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Automated pipeline for the analysis of a scale-reduced steel cable net

  • Ramonell Cazador, Carlos
  • Chacón Flores, Rolando Antonio
  • Krenn, Burkhard
  • Puig i Polo, Càrol
This paper proposes a digitally twinned experimental analysis of a scale-reduced laboratory-sized steel cable net subjected to vertical loading. The test is aimed at establishing automated pipelines of information and analysis between the measurements (displacements of nodes) and the numerical model of the cable net, which are seamlessly interconnected through a BIM model. These automated pipelines erect the frame of the development of a digital twin of the cable net with structural analysis purposes. For the sake of measurements, a terrestrial laser scanner is used. Displacements of the nodes are extracted using computational geometry tools. For the sake of analysis, a data-based numerical model is proposed to obtain the tensile state of the cables. Precisely understanding the force distribution along nets is a challenge at design, construction and operation stages. This research belongs to a vaster project related to the development of automated pipelines of information for European infrastructure in the form of digital twins. The outcome of this laboratory test results is of great use when developing similar automated pipelines of information in real sites including cable nets in roofs., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Real-time activity duration extraction of crane works for data-driven discrete event simulation

  • Jungmann, Manuel
  • Ungureanu, Lucian
  • Hartmann, Timo
  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio
The construction industry is struggling with low productivity rates because of a low level of digitalization, dynamic interactions, and uncontrollable circumstances on sites, which make the planning process complex. Usage of the digital twin construction paradigm enables to facilitate construction management and leverage the sector’s unexploited potential. This research addresses current shortcomings by real-time discrete event simulation. During crane operations, kinematic data were collected, which were classified by machine learning algorithms for activity recognition and duration extraction. Based on the identified durations, Goodness-of-Fit techniques determined suitable probability density functions. The resulting probability density functions were used as input parameters in stochastic discrete event simulations. It was shown that with enriched data collection, probability density functions have to be updated. The data-driven discrete event simulation facilitates decision-making processes by providing more reliable real-time information for the planning of upcoming construction works. Thus, data-based instead of experience-based management can be enabled., Part of this research has been conducted for the H2020 funded project ASHVIN, Grant Number: 958161. The authors are grateful to BIS structures, BCA, DRAGADOS, and FREO for providing access to construction site and for sharing project information., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Measurements, simulation, analysis and geolocation in a digital twin tool for bridge management

  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
  • Posada Cárcamo, Héctor José
  • Tomar, Rahul
  • Martínez de la Rosa, Christian
  • Stipanovic, Irina
This paper presents a digital-twin based tool that can be used for bridge management. The tool offers various capabilities that include embedding BIM geometries, simulations, measurements, GIS location, and performance analysis. These features enable efficient and effective management of bridges by providing detailed information and analysis of the bridge's performance, which can help in identifying potential issues and implementing appropriate solutions. The methodology represents one of the outcomes of Ashvin, an H2020 project aimed to providing assistant solution for design, construction and management of infrastructure systems. The hitherto obtained findings include this digital tool which can be of practical and beneficial use for bridge owners and operators, as it can help them to organize and centralize the bridge data in a way it helps making informed decisions regarding the maintenance, repair, and replacement of bridges. Overall, this paper highlights the importance of embracing technology in the management of critical infrastructure such as bridges, which can significantly improve their performance and extend their lifespan., European Commission. Grant Number: 958161, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seasonal analysis of a 846 long steel box girder bridge using Terrestrial Laser Scanners (TLS) and FE-models

  • Ramonell Cazador, Carlos
  • Chacón Flores, Rolando Antonio
This investigation presents the seasonal analysis of an 846 long steel box girder bridge using Terrestrial Laser Scanners (TLS) and FE-models. The Bridge is both vertically and horizontally curved with a tapered, stiffened steel box girder. The sequential seasonal measurement of the plates using a TLS provides a set of point clouds that can be systematically used to feed advanced inelastic FE analysis. Since the bridge experiences considerable seasonal displacements, the effect of these displacements on the ultimate load capacity of the composite bridge is under study. In the FE-analysis, comparisons between defining imperfections of the plates as adequately scaled Eigenshapes or, as real measurements, are performed. Different scenarios (seasonal and shape- related) are thus assessed. In addition, another challenge in this investigation is to digitize realistically and seasonally the “as built” shape of the plates. The definition of the resulting 3D geometry must be versatile enough to be used by different stakeholders (simulation, BIM managers, IoT). The outcome of this pipeline of information covering measurement-FE-analysis and assessment is of great interest to maintenance managers. Understanding the seasonal geometrical configuration of this bridge may represent an accurate starting point for subsequent forecasting of structural engineering scenarios., Authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. In Addition, the authors are grateful to BAGH Técnica and MITMA for providing access to the bridge for measurements, data collection as well for their disposition to share project information and follow the development of this research., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

I-Twin. Computational twin connectors for I-profiles: towards unforeseen interoperability of digital tools

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
Standard BIM data-exchange format requirements are permeating Building Construction. This is due to the increasing digital communication between Stakeholders of complex projects. All steps of development (conception, design, procurement, construction and operation) are pushing towards integration of data schemas. Desirably, knowledge and value generated by one stakeholder may then be leveraged by other stakeholders. 3D models, simulations, measurements, logbooks, schedules, as-built conditions and other information constructs are on the verge of interoperable communication. Structural Analysis must play a significant role within those more digitized data exchanges. This paper presents recent developments of frameworks, connectors and tools for the integration of structural I-shaped beam entities into Digital Twins. The information construct I-Twin encompasses information loads for geometries (IFC-Based), sensors (IoT) and simulations (FEM)., Authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. This publication reflects only authors' view and that the European Commission is not responsible for any uses that may be made of the information it contains., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards automated pipelines for processing load test data on a hs railway bridge in Spain using a digital twin

  • Ramonell Cazador, Carlos
  • Chacón Flores, Rolando Antonio
This document presents an automated pipeline to process sensor-based data produced during load tests on digitally twinned HS railway bridges. The research is developed within the frame of the H2020 European project ASHVIN, related to Assistants for Healthy, Safe, and Productive Virtual Construction, Design, Operation & Maintenance using Digital Twins. The pipeline is developed within a digital twin application based on event-driven microservices, which integrates the ASHVIN IoT platform, the IFC building information model and an array of services dedicated to automating processes performed during the operation stage of structural assets. A load test carried out on a bridge located on a HS railway in Spain is used as a demonstrator., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MATCHFEM: A Tool for automating steel structures digital design for construction and digital life.

  • Chacón Flores, Rolando Antonio
  • Posada Carcamo, Hector
  • Ramonell Cazador, Carlos
The digitization of construction processes is advancing at a rapid pace, with Building Information Modeling (BIM) methodologies playing a central role. The integration of these technologies provides an efficient and reliable project execution. Steel struc- tures, characterized by their standard elements, lend themselves well to industrial- ization and precision in construction. BIM methodologies are particularly effective in these scenarios, offering opportunities for improved life cycle analysis through en- hanced traceability of components. This approach leads to a more sustainable and optimized design and construction process. The use of parametric design tools in steel structures is becoming increasingly common, allowing for greater optimization of structural components design. By embedding measurements and data within BIM models, additional layers of information can be integrated, further enhancing struc- tural control and management throughout the project's life cycle. This paper intro- duces MatchFEM, a tool designed to integrate multiple layers of information for structural design and control within a computational geometry platform. MatchFEM interconnects geometries, incorporates sensors, numerical models, and various ap- plications to optimize the design and monitoring of steel structures. Case studies for structural elements showcase the tool's capabilities and effectiveness, This paper was prepared in the context of Ashvin, a EUH2020 RIA. In addition, improvements of the tool have been added within the context of the DI-101 2021 AGAUR Industrial Doctorate Program Doubly-curve surfaces through a digital twin. Hector Posada acknowledges the financial support provided by DI-101 2021 AGAUR for plugin refinements., Peer Reviewed, 9 - Indústria, Innovació i Infraestructura, 8 - Treball Decent i Creixement Econòmic, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MatchFEM: a computational design assistant tool for digital twins of buildings and infrastructure

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
Digital Twins (DT) has gained traction in recent years, offering significant potential to centralize design, construction and operation processes, improve management, and support decision-making. However, implementing DTs in the AECO sector involves managing various technologies and software, leading to increased complexity for professionals. This paper presents MatchFEM, a tool designed to simplify data generation for DTs within a unified environment. Developed as a plug-in for Grasshopper Computational Design (CD) software, MatchFEM facilitates 4D IFC-BIM modelling, IoT monitoring, data processing, and Structural Analysis models generation, key components of DTs. A case study is included to demonstrate its functionality and potential benefits., All authors acknowledge the funding of the ASHVIN project, a European Union’s Horizon 2020 research and innovation programme under grant agreement No 958161. Héctor Posada acknowledges the Foundation for the Future of Colombia (COLFUTURO), for the financial support. Carlos Ramonell acknowledges the funding of the FI-2021 AGAUR PhD grant and Rolando Chacón acknowledges the funding of the DI-101 2021 AGAUR Industrial Doctorate Program as well as PONT3, Grant PID2021-124236OB funded by MCIU/AEI/10.13039/501100011033 and by “ERDF/EU., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Geometrical digital twinning of a tapered, horizontally curved composite box girder bridge

  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
  • Puig i Polo, Càrol
  • Mirambell Arrizabalaga, Enrique
A composite bridge located in the Metropolitan Area of Barcelona represents one of the sites for demonstrating the capabilities of digital twins on maintenance of built assets. Digital twins can be deemed to as digital living replica of the physical one that provides real time information throughout adequate connectivity (sensors, images, remote sensing) and provides automated visualization of the asset for decision-making purposes (performance indicators that are assessed regularly). This demonstrator is an 846 meters long composite bridge with plates and a concrete slab. The plates are tapered along a portion of its length. The bridge is horizontally curved with a bifurcation at its end. One of the challenges in this demonstrator is to reproduce realistically the “as built” shape of the plates using a terrestrial laser scanner for simulation purposes. The outcome of this specific side of the digital twinning (other sides also include many sensor- and image-based methods) is of great interest for maintenance managers. Understanding the real configuration of the asset represents an accurate starting point for subsequent modelling., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ground-Based interferometer radars for load tests of long-span arch bridges. Case study: Almonte and El Tajo Viaducts, Extremadura, Spain

  • Rodriguez Gonzalez, Alejandro
  • Fuente, Jose Vicente
  • Fabregad, Roberto
  • Alvarez, Juan
  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
This paper depicts the deployment of Ground-Based Interferometer Synthetic Aperture Radars for obtaining displacements and accelerations of El Tajo and Almonte Viaducts during their routine load tests. These Viaducts belong to the Highspeed Railway Network between Madrid and Badajoz, which represents a strategic infrastructure in Spain. Both Viaducts are concrete arches whose size as well as whose height over the reservoir posed a tremendous challenge for obtaining proper field data using traditional devices. The paper shows the gathered experience on the use of this technique for subsequent routine load tests., Jose Vicente Fuente Acknowledges the support ot the program Torres y Quevedo (PTQ). R. Chacón and C. Ramonell acknowledge the funding of Ashvin, “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” a H2020 project under agreement 958161. All authors are grateful to ADIF for the invaluable collaboration and openness during the execution of the load tests vis-à-vis all research performed within the railway network premises., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Encompassing measurements, advanced analysis and BIM for Digital Twinning of steel structures

  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
  • Posada Cárcamo, Héctor José
  • Sierra, Pablo Leonel
  • Clarés Garcia, Antoni
With advanced analysis techniques, such as FE-analysis and computational modeling, engineers gain deeper insights of the behavior of steel structures. On the other hand, established technologies, such as sensors, cameras, or laser scanners, offer new ways to measure and monitor the behavior of structural systems with unprecedented accuracy and ease of data use. By deploying these devices strategically, engineers can capture critical data points providing understanding of structural behavior, condition and performance. Moreover, Building Information Modelling methods and their evolutionary transition to twins provide collaborative arenas for the integration of virtual representations together with physical and characteristics of a structure. These representations facilitate visualization, coordination, and communication throughout the construction lifecycle. Encompassing advanced analysis, measurements, and BIM represents the core concept of a multilayered digital twin presented in this paper. This paper presents a discussion on this concept through the lens of steel structures design using advanced analysis, data integration and interoperability. Some developments related to educational steel structures twins are also described., Authors acknowledge the funding of research projects based on Digital Twins for the Built Environments. Respectively, DI-2021, as part of the Industrial PhD program on Doubly Curved Digital Twins and “Ashvin- Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” as an H2020 project under agreement 958161 that provides access to two demonstrators depicted in the paper., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Closing the gap between concrete maturity monitoring and nonlinear time-dependent fem analysis through a digital twin. Case study: post-tensioned concrete slab of an office building, Barcelona, Spain

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio
  • Ungureanu, Lucian
  • Garcia Carrera, David
This paper proposes a pipeline for the automation of data between two realms: i) simulation, in a fully nonlinear, and time-dependent structural analysis model and, ii)concrete maturity monitoring data from the construction site. The connection enables an information construct understood for its use within the Digital Twin of the building during construction phases. The pipeline requires a comprehensive coordination between stakeholders at both the site (Construction) and the structural control office, which is challenging. The pipeline consists of a) temperature sensors, b) a mobile app connected to the sensor via Bluetooth with basic instructions for datagatherers, c) integration and interoperability of BIM, and, d) an advanced Finite Element (FE) model. By measuring the concrete temperature during many days, realistic concrete mechanical properties are inferred and infused into the FE models using adequate calibration. Two applications for the improvement of construction activities are identified. Formwork striking and tendons stressing. The paper describes the testbed of all the connections, for the construction of an in-situ casted concrete building in Barcelona, Spain., All authors acknowledge the funding of ASHVIN, “Assistants for Healthy, Safe, and Productive Virtu-al Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161. In Addition, the authors are grateful to BIS structures, BCA, DRAGADOS, and FREO for providing access to the construction site for measurements and data collection, as well for their disposition to share project information and follow the development of this research., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Platology: a digital twin ontology suite for the complete lifecycle of infrastructure

  • Khan, Rehan
  • Tomar, Rahul
  • Hartmann, Timo
  • Ungureanu, Lucian
  • Chacón Flores, Rolando Antonio
  • Ibrahim, Ahmed
The construction industry will have to present compelling solutions to achieve the UN Societal Development Goals (SDG). A digital twin has the potential to revolutionize the design, construction, and performance of civil infrastructure assets across the environment. This paper proposes an ontology mapping the physical objects with required attributes aiming to augment built infrastructured evelopment throughout their complete lifecycle in the context of cyber-physical synchronicity of the digital twin paradigm. This research is conducted within the framework of the H2020 project ASHVIN, aiming to develop a real-time Digital Twin for the Design, Construction, and Operation phase of the infrastructure. The proposed “Platology” ontology suite will encompass physical assets and processes of an infrastructure’s lifecycle and the possibility for accurate version, configuration, and state management to form a bidirectional communication path between the physical and the virtual., This research project is funded under the European Union’s program Horizon 2020 research and innovation programme under grant agreement no 958161., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Material characterization for HBIM data structures on a masonry arch bridge

  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
  • Posada Cárcamo, Héctor José
  • Pelà, Luca
  • Garcia Ramonda, Larisa
  • Gönen, Semih
  • Cabané Cañas, Albert
This paper presents a set of undertaken actions for characterizing masonry arch bridges using data structure suitable for proper embedment in Digital Twins and Heritage Building Information Modelling (HBM). Interfaces in bridge maintenance are relentlessly and increasingly sophisticated. For both new and existing bridges, these interfaces are tending towards their ability to deal with different sources of information. Comprehensive digital twins of heritage masonry arch bridges may include several sources of information gathered from the real asset. Measurements can be taken using many different techniques ranging from contact to contactless and from non-destructive to moderately destructive samples. In addition, these twins may base upon different numerical models aimed at predicting and anticipating the present and future behaviors of the asset, respectively. Masonry arch bridges are known for their complex material and structural characteristics. Digitizing these masonry properties is key for effective simulation and analysis, often involving homogenization of diverse material properties. The design of comprehensive information constructs able to store and federate multiple data layers within a single entity is still challenging. Layers must be connected using vast scoped solutions such as knowledge graphs, integrating measurements, simulations and other information sources. In this particular case study on a masonry arch bridge located in Catalonia, Spain, in-situ Non-Destructive Testing (NDT) data is conceptualized for proper infusion within HBIM schemas. This integration pursues a seamless information flow for analysis or predictive purposes., The financial support from the Ministry of Science and Innovation (Spain), the State Agency of Research, and the European Regional Development Fund (ERDF) through the project PONT3 (PID2021-124236OB-C32). Authors also acknowledge the #KPI50 initiative of Ashvin, an H2020 project under agreement 958161 for the complementary support to the development of twinning techniques in new sites. The fifth author acknowledges the financial support of the European Union – NextGeneration EU through the postdoctoral grant Margarita Salas., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)