Pasar al contenido principal

AVANCES EN CIENCIA Y TECNOLOGIA DE CEMENTOS HIBRIDOS- SOSTENIBLES

BIA2016-76466-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efecto del contenido de C3A en los cementos híbridos

  • Regidor, P.
  • Maltseva, O.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Póster presentado a las II Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en Madrid del 27 al 28 de mayo de 2019., Los cementos híbridos son unos cementos con muy bajo contenido de cemento portland (< 30%) y elevados contenidos de ceniza volante (<70%). Para acelerar el desarrollo de las resistencias iniciales se incorpora un activador alcalino (< 5%). El objetivo de este trabajo es determinar cómo influye el tipo de cemento empleado en la elaboración de cementos híbridos, más concretamente el contenido de C3A del cemento. Para este estudio se han empleado dos cementos comerciales: A=CEM I 52,5 R y B=CEM I 52,5 SR. Con ellos se elaboraron dos cementos híbridos: HYCA (27.5 % CEM I 52,5 R + 67.5 %5 % ceniza volante +5% activador) y HYCB (27.5 % CEM I 52,5 SR + 67.5 %5 % ceniza volante +5% activador). Inicialmente se determinaron las resistencias mecánicas en pasta, los tiempos de fraguado, y el calor liberado por calorimetría de conducción isoterma. Las pastas fueron caracterizadas por DRX y FTIR a 28 días. Finalmente se elaboraron hormigones a 2 y 28 días. Los resultados obtenidos muestran que, de los dos cementos híbridos, el que tiene un mayor contenido de C3A da lugar a cementos con tiempos de fraguado más cortos, y mayores resistencias iniciales., Ministerio de Ciencia Innovación y Universidades y fondos FEDER que subvencionan los proyectos BIA2016-76466-R y RTC2016-4872-S. Gracias también al MINECO y UE por la subvención del contrato de iniciativa al empleo Juvenil EI-GARJUV-GP17-0045 CAMGP17-IETCC_001.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hidratación del Clinker de sulfoaluminato de calcio (CSA) en medio alcalino

  • Padilla Encinas, Pilar
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Póster presentado a las II Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en Madrid del 27 al 28 de mayo de 2019., Los cementos de sulfoaluminato de calcio (CSA) se caracterizan por estar formados principalmente por ye¿elemita (C4A3Š). Estos cementos se consideran medioambientalmente más sostenibles que el OPC, debido a que la temperatura de su fabricación (1300ºC) es unos 300º menor que la del cemento portland (OPC). Dichos cementos se caracterizan por presentar una rápida velocidad de fraguado y endurecimiento, y un buen desarrollo de resistencias mecánicas a edades iniciales. Cuando se hidratan con agua en presencia de sulfato cálcico, se forma etringita e hidróxido de aluminio2. Pero cuando el Clinker de CSA se hidrata, en ausencia de sulfatos, dependiendo de la cantidad de agua utilizada, se puede obtener como productos de reacción etringita, monosulfato, C3AH6 y AH3. Este trabajo se ha estudiado como afecta la presencia de álcalis a la hidratación de un Clinker de CSA comercial (en ausencia de sulfato cálcico). Para ello el Clinker se hidrato con agua (referencia) y con disoluciones de NaOH (0.1M, 2M, y 4M). Se determinaron las resistencias mecánicas en probetas prismáticas de pasta a 2, 28 y 90 días. La velocidad de desprendimiento de calor se determinó por calorimetría de conducción isoterma, y los productos de reacción se han caracterizado por DRX, FTIR y SEM/EDX. Los resultados obtenidos indican que a medida que aumenta la concentración de NaOH en el medio, las resistencias mecánicas disminuyen debido principalmente a la formación de productos de reacción diferentes: Katoita, carboaluminatos y ternardita., Esta investigación fue desarrollada gracias al apoyo del Ministerio de Ciencia e Innovación y Universidades y fondo FEDER que subvencionan el proyecto BIA2016‐76466‐R, y la beca FPI (BES-2017-082022).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New alkaline-belitic hybrid binders

  • Palomo, Ángel
  • Fernández-Jiménez, Ana
  • Sánchez-Herrero, M. J.
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., This paper summarises a long-term study organized in two consecutive steps. The first, which involved exploring a number of laboratory-synthesised belite clinkers with slightly different mineral compositions in depth, culminated in the industrial-scale manufacture of one of those materials. In the second a hybrid alkaline belite cement was prepared containing 48 % of the industrial belite clinker, 48 % fly ash and 4 % chemicals. The hybrid binder was subsequently analysed to determine its mechanical strength and hydration products. The findings showed that the hybrid alkaline belite cement designed met the compositional, mechanical and setting time requirements laid down in European standard EN 197-1 and that its hydration favoured the simultaneous precipitation of a mix of cementitious gels: C-(A)-S-H and N-(C)-A-S-H., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2016‐76466‐R and RTC2016‐4872‐S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Mechanochemical activation of fly ashes a way to make concretes with high levels of substitution: hybrid concretes

  • Cabrera, Oscar
  • Viejo-Mariño, David
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
  • Maltseva, O.
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., The objective pursued in this study was to determine the mechanical properties and some technological characteristics of a few concrete formulations containing a high level of fly ash. Three concrete options were considered with respect the fly ash addition: i) concrete TO (prepared by adding original fly ash); ii) concrete TM (prepared with mechanically activated fly ash); iii) concrete TMA (prepared with mechano-chemical activated fly ash). The pozzolanic activity of the fly ash as function of the type of activation procedure (TO, TM or TMA) was determined by the Frattini method and also by the Activity Index. The effect of the fly ash in the hydration kinetics was also determined by conduction calorimetry. Finally the effect in the mechanical strength development was determined in a H-30 concrete. Results of this research indicate that the mechano-chemical treatment of the fly ash (TMA), allows to develop a compressive strength of 30 MPa at 28 days for a replacement level (fly ash for OPC) of 50%., This research was funded by the Spanish Ministry of the Economy and Competitiveness and funds FEDER under research projects BIA2013-43293-R and BIA2016-76466-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Role of ternesite on the hydration of C3A in the presence and absence of gypsum

  • Montes, Myriam
  • Pato, Esther
  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., In the search for new eco-cements it has been found that ternesite (2C2S·CaSO4), which has traditionally been regarded as a hydraulically inactive phase, can be activated by aluminum hidroxides (AH3) and some calcium aluminates. This research, in particular, studies the role of ternesite on C3A hydration, with and without gypsum. After laboratory synthesis, C3A was blended with ternesite, gypsum and ternesite+gypsum. The early hydration of those blends was monitored with isothermal conduction calorimetry at 25 °C for 7 days. The resulting pastes were analysed with XRD, FTIR and DTA/TG. Additionally, mixtures of C3AH6 and ternesite in water were prepared in order to study their compatibility. The calorimetric results showed a higher total heat per gram of aluminate in the sample containing gypsum and ternesite than in the sample C3A+ternesite. XRD diffractograms and DTG-TG analysis revealed the presence of AFm in all the samples with gypsum but not in C3A+ternesite which shows no evidence of ternesite activation by C3A., Funding from BIA2016-76466-R project as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) is gratefully acknowledged. Authors thank to Ministerio de Economía y Competitividad the young researcher contract given to Myriam Montes. Financial support for Dr. Paula M. Carmona-Quiroga’s participation was provided by the Spanish Ministry of the Economy and Competitiveness under project BIA2015-73237-JIN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of curing temperature in the hydration of a belite cement with high level of fly ash

  • Qu, Bo
  • Sánchez-Herrero, M. J.
  • Martín, Antonia
  • Pastor, José Y.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., This study aimed to determine the physical, mechanical, mineral and microstructural properties of a industrially manufactured hybrid cement (HYP), consisting 47,5 % Belite clinker + 47,5 % FA + 5 % solid alkaline activator. The effect of the curing temperature (25ºC, or 85 ºC) on hydration kinetics and on compressive strength development (in paste prisms and mortar prisms) was determined. Isothermal conduction calorimetry shows that curing at 85ºC, accelerates relevantly the hydration process. The 3 days compressive strength achieved by curing at 25oC was 9 MPa, but 30 MPa was the mechanical strength after 3 days if mortars were cured at 85ºC. After 28 days, the compressive strength of the specimen cured at 25oC was 33 MPa, and 43 MPa after 90 days. The specimens cured at 85oC exhibited a slightly better compressive strength. The hydration products formed were characterized using XRD, SEM/EDX and 27Al and 29Si MAS-NMR. The main reaction product formed was found to be a mixture of cementitious gels: C-(A)-S-H /C-A-S-H/(N,C )-A-S-H. The initial curing at 85°C for 20 h inhibited the formation of ettringite (or favored its rapid decomposition), at least during the first 90 days (maximum age of the materials analyzed in this work). On the contrary, curing at 85ºC favors the precipitation of the sulphates in the form of Phase U., This research was funded by the Spanish Ministry of the Economy, Industry and Competitiveness and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S, Ministry of Economy and Competitiveness of Spain (MAT2015-70780-C4-4-P), and Community of Madrid (S2013/MIT-2862-MULTIMATCHALLENGE). Author QuBo, a Ph.D. the student worked under a China Scholarship Council (CSC) grant.