Pasar al contenido principal

MODELOS ESTRUCTURALES PARA LA GESTION EFICIENTE DE INFRAESTRUCTURAS: SMART BIM MODELS

BIA2017-86811-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The dynamic assessment of structural condition by measurement error-minimizing observability method

  • Peng, Tian
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Turmo Coderque, José|||0000-0001-5001-2438
The structural identification using dynamic parameters (such as the natural vibration frequencies and mode shapes of the structure) is an important issue especially in slender structures such as long-span bridges or high-rise buildings. It is the most popular way to assess the structural condition along the service life . This article presents a new approach, under the framework of Structural System Identificaction by Observability Method (OM), to perform the structural system identification. The method is able of determining which actual structural properties (like Young’s modulus, area, inertia, mass) can be uniquely detected when an appropriate subset of mode-shapes and frequencies of the whole structure is provided. Error-Minimizing Observability Method (EMOM), which separates and merges the error items included in frequencies and mode shapes, is used to get an accurate estimate of element properties. A key issue in this method is how to choose the weight factor of frequencies and mode-shapes, when minimizing the objective function. This is still an unsolved problem and will pose a big influence on the results. Hence, a 2-dof example is illustrated in the paper dealing with this issue. . From the analysis of frequencies and mode-shapes with the best weight factor, it is found that through the fine calculation, the weight factor produced by the Bayesian method fits well with the one derived with the regular one-by-one calculation. This provides a criteria to choose the weight factor directly from the experimental samples by the Bayesian approach, thus decreasing the complexity and the computing time., This work is funded by the Spanish Ministry of Economy and Competitiveness projects (BIA2013-47290-R and BIA2017-86811-C2-1-R) and China Scholarship Council (No. 201808390083). The financial support is greatly appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Dynamic observability method for durability assessment considering measurement noise

  • Peng, Tian
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Turmo Coderque, José|||0000-0001-5001-2438
Due to the inevitable degradation of material properties in structures in daily use, such as stiffness degradation due to cracking in concrete elements, their durability will definitely be influenced, and their serviceability and safety could be in danger. Thus, understanding and identifying the change in the structural parameters provides new approaches to evaluate their durability. Structural system identification by dynamic observability method, which is using subsets of masses, natural frequencies and modal shapes, is a powerful tool to detect the change of structural parameters. Taking into account the presence of noise in the measurement data in real world structures, this method establishes the relative dynamic equation with the error separation items. The equation is solved by error minimization of an objective function combining the measured frequencies and mode shapes through the parameter MAC (Modal Assurance Criterion). Additionally, the algorithms and the steps are introduced based on the dynamic eigenvalue equation, which can fully demonstrate the performance of observability techniques. The present paper provides an example on how to successfully identify structural parameters. Its suitability for practical applications is demonstrated in a large frame structure. The result is a much more accurate identification of the parameters involved in the durability of the structure even in the case of noise-corrupted measurement signals., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R and BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. It is also to be noted that the part of this work was done included an exchange of faculty financed by the Chinese government to Mrs.Peng thorough the program (No. 201808390083).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Benchmark model updating for cable stayed bridges

  • Lai, Minghui
  • Ma, Haiying
  • Sun, Pingkuan
  • Turmo Coderque, José|||0000-0001-5001-2438
The use of benchmark model aims to establish a model with sufficient accuracy to reflect structure performance. Its purpose is seeking differences through repeated studying on problems using common FE model. In the paper, a novel approach is proposed for the benchmark model updating of a cable stayed bridge. It is based on the interaction of numerical analysis program and FE analysis program with updating model parameters from loop iteration operation. Shell elements and beam elements are both used, and the natural vibration frequencies and mode shapes from plate-shell element model are determined. These are used to modify the parameters used in a spine-beam element model, and to simplify a complicated FE model as a benchmark model. The genetic algorithm (GA) is introduced to complete the calculation process of loop iteration. Finally, an updated benchmark model is proposed for cable stayed bridges., The authors are indebted to research funding provided by the National Key R&D Program of China (2017YFC1500603), and to the Spanish Ministry of Economy and Competitiveness and FEDER funds for the funding provided through the research project BIA2017-86811-C2-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Study of Iranian engineering educational system

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
One of the main features of each society and civilization is the importance of educational system. All countries around the world have used specific educational planning for growing their people as well as developing the country. This paper has comprehensively evaluated civil engineering educational program in universities oflran. In the current system, tendencies of graduates are more toward education of engineers who are ready to have academic jobs but not operative jobs such as increasing and improving national production or meeting technical needs of country. One strategy that can be used in this context is having long term planning for civil engineering students, which includes increasing the budget for establishment of equipped laboratories and at the same time enhancing professional job opportunities., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-l-R, and BIA2017-8681 l-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Strain-monitoring of a concrete tunnel lining with distributed optical fiber sensors

  • Gómez i Esteve, Judit
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Villalba Herrero, Sergi|||0000-0001-6535-6372
Despite their advantageous performance and reliability, distributed optical fiber sensors (DOFS) still constitute a recent technology and their reliability and accuracy when applied to real world structures is still under probation since there is still room for improvement and for widening their applicability. In general, standardized guidelines need to be developed to ensure success in every DOFSs deployment regarding fiber bonding to the structure, temperature affections on readings, postprocessing of reading anomalies, among other factors. However, real applications, as in the one presented in this paper, show that DOFS are anticipated to have a very important role in Structural Health Management of tunnels in the near future if correctly understood and developed. This paper addresses the implementation of a Distributed Optical Fiber Sensor system (DOFS) to the existing TMB L-9 metro tunnel in Barcelona for Structural Health Monitoring (SHM) purposes as the former could potentially be affected by the construction of a nearby residential building. The results show a good performance of this novel technique in the monitoring of strain along the whole affected sections during the construction of a nearby building. In fact, the DOFS readings reproduce very accurately the tunnel deformation process. The tendencies observed by the sensors were forecasted by a simple theoretical model. The monitoring of the strain at many points in the critical section allowed to conclude that the nearby construction only slightly affected the lining stresses and that safety was guaranteed during the whole monitored period., The authors thank COTCA and TMB respectively for providing access to the necessary data regarding the case study and supporting this research. We would also like to thank Ph D student Mattia F. Bado who provided insight that greatly assisted this research during the data post-processing phase. The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental verification of a novel accelerometer intended for structural health monitoring of bridges

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Alahmad, Ahmad|||0000-0002-6127-1897
  • Lozano Galant, José Antonio
  • Torralba Mendiola, Víctor
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Turmo Coderque, José|||0000-0001-5001-2438
Bridges can be considered one of the most critical infrastructures of any country. Subsequently, their health state assessment is of great importance. However, durable monitoring of bridges can be highly costly and time-consuming. In addition, the current Structural Health Monitoring applications are only applicable to individual structures with a high budget for their health assessment. For a long-term economic evaluation of bridges, low-cost sensors are currently being developed for SHM applications. However, their resolution and accuracy are not yet suitable for structural system identifications. For that, a novel accelerometer based on Arduino technology is introduced in this work. Experiments show that this accelerometer has a better resolution. Illustrated test results of this paper on a frequency range of 0.5 to 8 Hz validate the performance of the proposed accelerometer., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Acceleration data quality assessment for bridge structural health monitoring via statistical and deep-learning approach

  • Zhong, Huaqiang
  • Sun, Limin
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Xia, Ye
In recent years, the safety and comfort problems of bridges are not uncommon, and the operating conditions of in-service bridges have received widespread attention. Many large-span key bridges have installed structural health monitoring systems and collected massive amounts of data. Monitoring data is the basis of structural damage identification and performance evaluation, and it is of great significance to analyze and evaluate its quality. This paper takes the acceleration monitoring data of the main girder and arch rib of a long-span arch bridge as the research object, analyzes and summarizes the statistical characteristics of the data, summarizes 6 abnormal data conditions, and proposes a data quality evaluation method of convolutional neural network. This paper conducts frequency statistics on the acceleration vibration amplitude of the bridge in December 2018 in hours. In order to highlight the end effect of frequency statistics, the whole is amplified and used as network input for training and data quality evaluation. The results are good. It provides another new method for structural monitoring data quality evaluation and abnormal data elimination., This paper is supported by the National Key R&D Program of China (2019YFB1600702), the National Natural Science Foundation of China (51978508), and the Ministry of Hosing and Urban-Rural Development (K2019690). The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Accelerated viaduct construction

  • Turmo Coderque, José|||0000-0001-5001-2438
Modern geometrical requirements for high capacity ground infrastructure, as highways or high speed train lines, imply increasing number of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Among them, a very popular one for medium span concrete viaducts is the span by span construction with movable scaffolding system. The method can be easily adapted to any geometry and, from an environmental point of view, only the shadow of the deck is spoilt during construction periods. Since its first application in the Kettiger Hangbrücke, (Germany) in 1959, this construction method has been applied extensively all around the world. The paper will describe the pros and cons of the method and will explain in detail the last developments made in order to reduce to a minimum the critical path, increasing its competitiveness. New construction sequences, non-standardized structural details, static and dynamic tests, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the method., The author are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2, funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Spain, for the funding provided through Agaur (2017 SGR 1481). The author wants to thank also Mr. Roberto Soto, from Mecanotubo S.A., for all his support.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Practical application of low-cost sensors for static tests

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural Health Monitoring (SHM) is essential to assess the accuracy of durability predictions of structures. Using low-cost sensors on structural evaluation has gained significant attention compare to high-cost sensors. Although these may not be as accurate and sensitive as the expensive electronic devices, with efficient code and right use, there is a possibility of getting useful information from them. These sensors can vary based on their functionality and the measurements they provide. For example, one is highly sensitive to the light of its environment while the other kind would give different results in different temperatures. In this paper, three different displacement measuring sensors have been studied. An ultrasonic sensor (HC-SR04) and two different types of laser sensors (VL53L0X and VL53L1X) are investigated in the paper. An Arduino Mega has captured their measured data, and a raspberry pi has made the acquisition. Not only issues regarding coding and placing of these sensors have been presented ultimately, but precise solutions for the aforementioned problems as well as an efficient way of assembling all the sensors are also presented in this paper. The data generated from these electronic devices can be used for Structural Health Monitoring applications., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Using few accelerometer for improving the resolution and accuracy of low-cost accelerometers

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Komary, Mahyad|||0000-0002-3219-2970
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
Since the Structural Health Monitoring applications are getting significant attention from scien-tists and engineers, a new system has been introduced. This device is capable of acquiring vibrations with a sampling frequency of up to 85 Hz. In this paper, the effect of having several synchronized accelerometers on a rigid plate for improving the resolution and accuracy of a new vibration acquisition system is investigated. An experimental test has been carried out to investigate the reliability of the claimed theory. Accelerometers made from combining one, two, three, four and five low-cost low-resolution accelerometers are made and tested on a shaking table. The overall results show that the number of combined accelerometers has an indirect ratio with the obtained noise density of the final product., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Gener-alitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innova-ción y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of low-cost angular measuring sensors

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
One of the main issues for performing Structural Health Monitoring (SHM) is the high cost of metering devices. In order to make it applicable to the conventional structures with low defined budgets, low-cost sensors have been widely utilized. In this paper, the characteristics of a low-cost circuit (MPU9250) with low power consumption for measuring angles are studied. This circuit is composed of an accelerometer, a gyroscope, and a magnetometer. There are two ways of coding and using this sensor for angular measurements. In the first application, the accelerometer and the gyroscope of the circuit are only used to get angle around X and Y-axis. In the second application, the gyroscope is going to be added to the other two sensors in order to get angular measurements of all axis. The data accuracy plus the advantages and disadvantages of the response of this circuit regarding each code has been studied in this paper by using the codded sensor in some experiments. Although the second application showed less error from the expected results, it was less stable than the first application., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Use of fiber reinforced concrete in compression slabs of beam-and-slab decks for new bridge constructions

  • Domingo Tarancón, Magí|||0000-0002-5403-5204
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Aparicio Bengoechea, Ángel Carlos|||0000-0002-3029-9491
In the last decade, Fiber Reinforced Concrete (FRC) has allowed engineers to enhance the performance of different structural concrete members. From previous experiences in building flat slabs, it has been found that FRC members are capable of withstanding loads with either none or very reduced amounts of reinforcement. It has been proven that FRC enhances the resistance capabilities of flat elements under common internal forces (bending moment, one-way shear, punching, etc.). Given the compressive behavior of top slabs in bridge decks, the amount of minimum reinforcement placed in it might be higher than required by structural analysis. Considering the use of FRC in top slabs, an increased durability and/or an important reduction of reinforcement quantities could be achieved. In this research the results of the structural behavior of a top slab for a beam-and-slab deck considering the use of FRC are presented. It has been accounted for specific bridge loads and geometry layouts not found in other structural elements, such as building slabs. The structural analysis is done by means of global numerical model of the bridge, which has led to a combined transversal flexure and compressions in the longitudinal direction of the slab. The results show that minimum reinforcement at ultimate load can be slightly reduced (ranging from 12 to 18%) while providing an enhanced cracking control, which would turn into a durability performance increase of the slab., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Uni-versities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Ministry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A review on low-cost sensors compatible with open-source platforms used for life-cycle monitoring of civil structures

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
  • Xia, Ye
Lately, the need for adopting sensors in buildings and infrastructures for monitoring and inspection of the health state of those structures is increasing. This demand is due to the increasing age of the structural stock worldwide. Consequently, more economical ways of Structural Health Monitoring applications are getting huge attention. This paper presents and evaluates several low-cost electronics compatible with open-source digital technologies for static and dynamic Structural System Identification applications. Firstly, an open-source microcontroller (Arduino), the main programable logic controller, and a Raspberry pi, a small single-board computer, are introduced. Secondly, various economic sensors with diverse measurement applications, such as ultrasonic and laser ranging, acceleration, temperature, and humidity, are discussed. Thirdly, multiple experiments in different controlled ambients are applied to assess and compare their tolerances as well as advantages and disadvantages of their use, among their price. Some problems with the Arduino codes and sensor positions emerged during the installation of the sensors and the data collection process. Finally, to attain an effective manner of using these low-cost electronics, this article offers answers to the issues faced., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo.This project was funded with FEDER funds. Authors are also indebted to the Secre-taria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Cost-effective measurement equipment and data analysis tool for structural health monitoring. Case study: metro railway bridge

  • Sierra, Pablo Leonel|||0000-0001-6440-2832
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Martínez García, Javier|||0000-0001-9178-088X
Structural Health Monitoring (SHM) of bridges is getting special attention of infrastructure management agencies, due to its success in minimizing maintenance costs. The acquisition of structural behaviour data and its analysis to assess the structural condition are critical tasks of SHM. In this paper both are addressed. A cost - effective measurement equipment based on triaxial accelerometers is developed. It is coupled with an operational modal analysis tool that allows extracting natural frequencies, mode shapes and damping under operational loads. Both, hardware and software, are tested in a case study of a railway bridge of the Madrid Metro network. Other measurement equipments are deployed to compare results. Natural frequencies are calculated, showing a good correlation between the different systems. The obtained results provide relevant information about the global behaviour of the structure. Therefore, the proposed cost - effective solution could be used in a SHM system for continuous bridge monitoring., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Uni-versities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Ministry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Environmental monitoring system based on low-cost sensors

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Temperature and humidity measurements provide useful information on multiple areas of civil engineering application such as Structural Health Monitoring (SHM), Structural System Identification (SSI) and structures rehabilitation. Majority of the existing commercial systems are so costly and also these measurement paradigms need many reference spots for a full-scale structure. The aforesaid paradigms are based on collecting data through smart devices, transferring information to each other and in the final stage processing the obtained information collaboratively through cloud computing or the others technologies. Taking into account the above information and obstacles, utilizing the Open Source Platforms (OSP) microcontrollers like Arduino as well as low cost sensors are attracting more and more attention. This paper gives a comprehensive information about the most determinant aspects of the aforementioned kits in terms of their pros and cons, installation procedure, communication protocol, number of the required connections and specific characteristics of the data acquisition system., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Low-cost accurate acceleration acquisition sensor

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Komary, Mahyad|||0000-0002-3219-2970
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Torralba Mendiola, Víctor
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
Nowadays, accelerometers are used widely by civil engineers for Structural Health Monitor-ing (SHM) purposes. The expensive cost of acquisition equipment and accelerometers have made the SHM applications unavailable for structures with relatively low budgets for their assessment. A new accelerometer has been proposed in this paper. This accelerometer is a uniaxial accelerometer with a sampling frequency of up to 85Hz. Although the proposed accelerometer is 17 times cheaper than a traditional accelerometer (PCB 393A03), it provides a better resolution and accuracy at the same time. An experimental test has been carried out for comparing the proposed accelerometer with PCB 393A03 sensor., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Inves-tigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

New methodology to sustainability assessment in viaducts: a case study in Cataluña, Spain

  • Jurado, Julio
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Viaducts, like other infrastructure works, are essential for economic and social development. The construction of viaducts has been carried out for more than 4,000 years. Advances in construction technologies have allowed the development of larger and larger works. Mother requirements demands that these engineering jobs are sustainable. Therefore, they must be evaluated economically, environmentally, and socially to ensure that the resources they use do not compromise the ability of future generations to meet their needs. The evaluation can be carried out under different methodologies. However, this work evaluates a viaduct with a new methodology based on the integration between the "Integrated Value Model for Sustainability Assessment" (MIVES) and the "Building Information Modeling" (BIM). Three evaluation scenarios are presented focused on an investor's point of view, on balanced sustainability, and finally, on an economic crisis scenario. The results indicate the robustness of the method., This work was partially funded by the Spanish Ministry of Economy and Competitiveness and FEDER fund (Grant No: BIA2017-86811-C2) and by the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya through Agaur (Grant No: 2017 SGR 1481) and by the “Secretaría de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) of Ecuador.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Development of an accurate low-cost device for structural vibration acquisition

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Komary, Mahyad|||0000-0002-3219-2970
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural Health Monitoring (SHM) applications are getting tremendous attention from engineers; However, the expensive sensors and equipment needed for extracting the structures' modal characteristics made SHM application only applicable to singular structures with a high budget for their health assessment. For applying the SHM systems to structures with lower health evaluation budget, a new accurate and low-cost device is proposed for the measurements of structural vibrations. This is composed of five similar simultaneous accelerometers located on a same spot for measuring the same signal. For validating the accuracy of this device, laboratory experiments were carried on; subsequently, the out-puts of the proposed device were compared with two piezoelectric accelerometers (PCB 393A03 and PCB 356B18). The results of the experiments show that not only is the proposed device 14 times less expensive than PCB 393A03, but it can also acquire vibration on lower frequencies and acceleration amplitudes where the expensive sensors could not provide any outputs., The authors are indebted to the Spanish Ministry of Economy and Competitive-ness for the funding provided through the research project BIA2017-86811-C2-1- -86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria sitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Koma-rizadehasl by Spanish Agencia Estatal de Investigación grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive description of a Low-Cost Angular Data Monitoring System

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
Structural Health Monitoring (SHM) is basic to survey the exactness of strength forecasts of structures. Utilizing low-cost sensors on structural assessment have increased in contrast with using high-cost sensors. Although these may not be as exact and accurate as of the costly electronic gadgets, with an effective code and right use there is a probability of getting helpful data from them. The information produced from these low-cost sensors can provide useful insight for the SHM systems. In this paper problems regarding angular data acquisition together with their respective solutions are presented. Not only issues regarding coding and placing of these sensors have been presented completely, but precise solutions for the aforementioned problems as well as an efficient way of assembling and preparing the sensors have also been presented. The proposed circuit is composed of an accelerometer, a gyroscope, a magnetometer, an Arduino board and a Laptop, as an information recorder and moderator., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the fund-ing provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZA-DEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Beneficial effect of combining similar low-cost accelerometer to improve the overall accuracy and noise density

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Alahmad, Ahmad|||0000-0002-6127-1897
  • Lozano Galant, José Antonio
  • Torralba Mendiola, Víctor
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural Health Monitoring applications are receiving more and more attention nowadays. The epidemic problem with these evaluations is their high cost. For applying them to structures/ infrastructures with a low budget of SHM evaluations, low-cost sensors must be taken into account. However, low-cost accelerometers have higher noise density ratios which affect their accuracy and resolution. Using filters or post-processing methods alters the acquired information of the accelerometers. This article aims to enhance the accuracy and resolution of low-cost sensors by improving and controlling the spectral noise level through active noise improvement. This improvement is studied in this paper and supportive laboratory experiments have been illustrated., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Final overview of COST Action TU1406: quality control of existing bridges

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Across Europe, the need to manage roadway bridges efficiently led to the development of multiple management systems. Despite presenting similar architectural frameworks, the condition assessment procedure is one of the difference that distinguishes them. This dissimilarity constitutes a divergent mechanism that has direct interference in the decision making process leading to considerable variations in roadway bridges quality. COST Action TU1406 aims to institute a standardized roadway bridges condition assessment procedure. Such purpose requires the establishment of recommendations for the quantification of performance indicators, the definition of performance goals and a guideline for the standardization of quality control plans for bridges. By developing new approaches to quantify and assess bridge performance, as well as quality specifications to assure expected performance levels, bridge management strategies will be significantly improved, enhancing asset management of ageing structures in Europe. The work developed and achieved by COST Action TU1406 will be presented.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Detailed evaluation of low-cost ranging sensors for structural health monitoring applications

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
To evaluate the safety of structures, choosing a proper maintains protocol to assess the performance/ workability of the structures in the future, Structural health monitoring (SHM) applications are required. The SHM application usually applies to unique structures with high budgets. For using them on structures with low-budgets low-cost sensors required. Low-cost sensors are getting considerable attention compared with the expensive traditional alternatives. This paper introduces 3 types of low-cost displacement measuring sensors. These sensors were programmed and controlled by an Arduino. Acquiring data from them was done by a connected computer to the Arduino. By engaging these sensors in a few experiments and evaluating their responses, their functionality and accuracy in different situations are investigated. Moreover, the pros and cons of each one of them for each test are illustrated. By taking into account their price, their advantages on exceptional circumstances, and their reliability, different sensors for different situations have been proposed., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017- 86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive description of a low-cost wireless dynamic real-time data acquisition and monitoring system

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Nowadays,low-cost sensors and acquisition devices have been emerging as an obvioussolution to many innovative applications such as Structural Health Monitoring (SHM) systems. In this paper,issues regarding dynamic data acquisition,as well as their respective solutions,are presented. Moreover, a comprehensive description through-out an inexpensive sensor network system using open-source hardware for a real-time acceleration data acquisition has beenpresented. The platform consists of an accelerometer, an Arduino board,and a computeras a data recorder and presenter. Data is recorded through an efficient microcontroller code that can provide a considerable reading frequency (up to 300Hz). Using Python, instant acceleration recording for all the threeaxes has been done. It is shown how the performance of the proposed system is efficientfor the field of SHM systems., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of different low-cost sensors for structural health monitoring

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Lozano Galant, José Antonio
Recently, the need for Structural Health Monitoring (SHM) and inspection is growing as a result of the increasing age of the structural stock worldwide. SHM includes bringing into use a sensor or an array of sensors into an engineered structure. This paper evaluates the practical aspects to consider when choosing different low-cost sensors for using in a SHM application. For this reason, a microcontroller (Arduino) with attached sensors (Ultrasonic, Laser, Gyroscope, Accelerometer, Temperature-humidity, SD-module) has been used throughout different controlled ambient situations and experiments. During the sensor installation and data acquisition, some issues related to the Arduino codes and position of the sensors arise. In this article solutions for tackling faced problems have been presented for achieving an efficient way of using these electronic devices. Their data have been collected to assess and compare their tolerances as well as advantages and disadvantages of their use, cost among them. The information from this article could be used either to choose the appropriate sensors either for static or for dynamic Structural System Identification (SSI)., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this re-search has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Inves-tigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Full review of low-cost electronics implemented in structural health monitoring applications for bridges

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Tošić, Nikola|||0000-0003-0242-8804
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Torralba Mendiola, Víctor
Recently Structural Health Monitoring (SHM) is attracting so much attention due to the global structural stock’s growing era. SHM is a system including sensors and management algorithms that provide non-destructive in-situ information about a structure’s performance condition or health. Therefore, lately, the demand for adopting low-cost sensors for static or dynamic Structural System Identi¿cation (SSI) has increased. This paper introduces and evaluates different low-cost sensors mainly used in the bridges SHM applications. Firstly, the Ardu-ino Uno, which is the programmable logic controller, and diverse sensors such as Ultrasonic, Laser, Gyroscope, Accelerometer, Temperature-humidity were introduced. Secondly, different tests were applied in controlled ambi-ent situations to identify dif¿culties during sensor installation and data acquisition. This study presents solutions for encountered problems in order to use these low-cost electronic devices ef¿ciently for SHM purposes., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo.This project was funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been pro-vided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Finite fault source model for ground motion near fault zone

  • Qiu, Yuan
  • Ma, Haiying
  • Xia, Ye
  • Lai, Minghui
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Lozano Galant, José Antonio
Ground motion is categorized into near fault zone and across fault zone where impulsive component is included. The impulsive component usually causes larger damage than that by far-fault ground motion. To build a Benchmark model platform for cable-stayed bridges across-fault region for comparative analysis, the paper proposes a way combining the finite fault source model. In the paper, the finite fault source model was conducted based on the site Qiongshan earthquake. After the geological structural parameters were determined, forward modeling of near site earthquake was carried out, and the observation points were obtained using numerical simulation. Then, the analysis results were compared with the pulse characteristic parameters of similar grade of recording ground motion. Additionally, the ground motion near-fault region was analyzed to validate the finite fault source model., The authors are indebted to research funding provided by the National Key R&D Program of China (2017YFC1500603), and to the Spanish Ministry of Economy and Competitiveness and FEDER funds for the funding provided through the research project BIA2017-86811-C2-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Calibración de herramientas heurística para la optimización del proceso de tesado de puentes atirantados, Calibration of heurist tool parameters for the optimization of tensioning process of cablestayed bridges

  • Gisbert Doménech, Carlos Miguel
  • Lozano Galant, José Antonio
  • Payá Zaforteza, Ignacio Javier
  • Turmo Coderque, José|||0000-0001-5001-2438
El diseño y la materialización del proceso constructivo es uno de los aspectos más complicados en proyecto de los puentes atirantados. En la mayoría de las estructuras este proceso se define en base únicamente a la experiencia del proyectista sin optimizar el comportamiento estructural de ningún elemento del puente. En este artículo se propone la optimización del proceso de tesado de puentes atirantados mediante la utilización de algoritmos heurísticos. Uno de los principales inconvenientes de este tipo de herramientas es el hecho de que la solución depende, en mayor o menor medida, de los parámetros del algoritmo. Para determinar estos parámetros, tradicionalmente se realizan numerosas combinaciones aleatorias de estos parámetros. Sin embargo, y pese a su elevado coste computacional, este procedimiento no permite garantizar que se haya encontrado la combinación óptima de estos parámetros. Para solucionar este problema, el presente artículo propone la aplicación de las técnicas de diseño de experimentos para calibrar los parámetros de las herramientas de optimización heurística con un reducido coste computacional. La metodología propuesta se valida mediante la optimización del proceso de tesado de un puente atirantado., Los autores desean agradecer el apoyo proporcionado por el Ministerio de Economía y competitividad, por los proyectos de investigación BIA2013-47290-R, BIA2017-86811-C2-1-R y BIA2017-86811-C2-2-R financiados con fondos FEDER.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Determination of environmental parameters based on Arduino based low-cost sensors

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Taking into account that the age of structures is closely connected to their energy consumption, the monitoring of structures is a crucial task for engineers. This article deals with application of Arduino based low-cost sensors for environmental monitoring ofbuildings. To do so, open source platform Arduino as well as four environmental sensors, DHT22, have been used for measuring variation of temperature and humidity. In order to check accuracy of the utilized data acquisition system, statistical approach was used to check the repeatability and discrepancy of the recorded data. Statistical calculations indicate that the sensor is more accurate in terms of measuring temperature rather than humidity one since discrepancy of the temperature parameter is less than the humidity one. Toe maximum range of standard deviation derived for temperature and humidity parameters are less than 0.13 and 1.33 respectively., Toe authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Industrialized construction of medium span concrete bridges using movable false work

  • Turmo Coderque, José|||0000-0001-5001-2438
Modern geometrical requirements for high capacity ground infrastructure, as highways or high-speed train lines, imply increasing numbers of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Long viaducts are usually solved by means of medium span concrete viaducts. For the sake of quality and health and safety, industrialized construction methods, as launching girders or precast construction, is usually preferred. The paper will describe the pros and cons of some construction methods using movable trusses to hold in place either the formwork or precast segments, emphasizing the possibilities of reducing the critical path. New construction sequences, non-standardized structural details, static and dynamic tests, reinforcing criteria, structural response, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the methods., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optimal sensor placement methods and criteria in dynamic testing: comparison and implementation on a pedestrian bridge

  • Lizana Vilaseca, Marc
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Structural health monitoring (SHM) is being widely used for the safety assessment and management of existing bridges and structures. One of the objectives related to SHM is to maximize the information gained from the structural testing, while keeping the number of sensors and consequently the cost of the sensor system to a minimum. The current work investigates four of the most influential optimal sensor placement (OSP) methods: the modal kinetic energy (MKE) method, the effective independence (EFI) method, the information entropy index (IEI) method and the MinMAC method. The methods were developed in MATLAB and used as input data the modal analysis results of a finite element model built in ANSYS of the Streicker Bridge, a pedestrian bridge located on the Princeton University Campus. The resulting sensor positions were estimated for a configuration with 14 sensors, and the four OSP methods were evaluated for different numbers of target sensors in terms of different OSP criteria: the determinant (DET) of the Fisher information matrix, the information entropy index (IEI) and the root mean square (RMS) of the off-diagonal entries of the MAC matrix. The study indicates that the EFI method should be chosen to estimate the optimal sensor positions as it provides the largest amount of information with a relatively low computation time., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resolution improvement of low-cost MEMS accelerometer by aligning simulations sensors

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Komary, Mahyad|||0000-0002-3219-2970
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Nowadays, accelerometers are being used in various civil engineering applications. Their versatility made them desirable in many Structural Health Monitoring (SHM) application. A significant issue with their use is the fact that traditional commercial accelerometers are very expensive. Moreover, the low-cost solutions are not very accurate. To tackle this drawback and to enable low-cost accelerometers applicable to more SHM applications, a novel methodology for improving the resolution of low-cost MEMS accelerometers is presented in this paper. To this end the noise density level of more than one accelerometer was controlled by aligning on the same location for reading the same input wave. The results of the performed laboratory tests showed that the higher the number of aligned accelerometers the lower the reported noise. Aligning a higher number of accelerometers also improve the system's final resolution in frequency domain diagrams., The authors are indebted to the Spanish Ministry of Economy and Competitive-ness for the funding provided through the research project BIA2017-86811-C2-1- R directed by José Turma and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Models for evaluating shear strength on members with circular cross section

  • Turmo Coderque, José|||0000-0001-5001-2438
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Aparicio Bengoechea, Ángel Carlos|||0000-0002-3029-9491
Solid circular columns are often used as structural supports in bridges, buildings and foundations due to their simplicity of construction and because their strength is similar in any direction. This deem them very suitable to resist wind and seismic loads. Hollow core circular concrete members are much less structurally used than solid circular cross sections. However, these can be found in concrete chimneys, concrete pipes and elevated water tanks, as well as in large bridge columns and offshore platforms. Codes do not usually propose specific formulations for evaluating the shear strength of such structural types or if they do, they do so in a very simplified manner. Hence, an analytical model for evaluating the contribution of the transverse reinforcement in concrete members of solid and hollow circular cross section is presented in this paper. After a thorough bibliographic research on the previous studies on the matter, the shortage of work accomplished on the topic has been assessed and the unsolved problems identified. A formula for evaluating the shear transferred by spiral reinforcement in solid members is presented. A formula for the calculation of hollow core circular columns with both vertical and spiral reinforcement is also deduced. Assumptions made for the calculation of this formulation have been deduced theoretically and then checked empirically. Hence, shear tests on circular hollow core specimens will be also presented.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling the construction of cable stayed bridges stressed with the strand by strand technique

  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The temporary supports erection method is the most common way of building cable-stayed bridges. In this technique the bridge deck is first built over a set of temporary and permanent supports. Then, during the tensioning process, the stays are successively placed and tensioned by the jacks and the deck is raised from the temporary supports. Several variants of this method are the launching of the bridge and the rotation method. This paper proposes an algorithm to calculate and to control the construction of such bridges when the strand by strand tensioning technique is used. It is based on the unstressed length of the stays concept. The use of such concept enables a fast and direct simulation of construction stages by analysing independent Finite Element Models. As there is no need of superposition of models it is a very convenient way for construction supervision.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Developing and validation of an inclinometer sensor based on fusion of a magnetometer, an accelerometer and a gyroscope sensor for SHM applications

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Torralba Mendiola, Víctor
Structural Health Monitoring (SHM) programs play a critical role in civil engineering, par-ticularly for evaluating safety conditions and forecasting the strength of large structures such as bridges. Therefore, employing low-cost sensors with implementing different techniques to improve their accuracy compared to high-cost accurate sensors has attracted much attention for structural assessments. In fact, with adequate code and the proper mode to utilize their features and potentials, there is a probability of acquiring valuable data from these low-cost sensors, which can provide helpful insight for the SHM systems. Hence, this study proposes the use of a low-cost circuit for angular measurements based on the fusion of an acceler-ometer, a gyroscope, and a magnetometer sensor with an Arduino board. In this study, firstly, an introduction through Arduino due and the used sensor is presented. Then angular data acquisition problems, as well as their respective solutions, are presented., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the fund-ing provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADE-HASL by Agencia Estatal de Investigación del Minis-terio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the impact of using Fiber Reinforced Concrete on service life of bridges: a case study

  • Domingo Tarancón, Magí|||0000-0002-5403-5204
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Aparicio Bengoechea, Ángel Carlos|||0000-0002-3029-9491
During the last decades the use of ¿ber reinforced concrete (FRC) has been increasing and extending to different areas where structural responsibility was required, being the latest research focused on sus-pended slabs only made of FRC. This could suggest that more ¿elds of concrete structures could bene¿t from this material, including bridges. This paper presents the research about a bridge design considering FRC. An assess-ment on how the material can in¿uence both design strength and expected service response is given (sectional strength and crack width). The existing Line 2 Metrorrey’s viaduct is used as reference to perform the structural analysis and design, where both conventional and ¿ber reinforced concretes are evaluated. The bridge is modeled and analyzed by means of standard numerical analysis and current code regulations are used to obtain preliminary ultimate and serviceability design loads. The assessment of the bridge is mainly based on the veri¿cation of the bottom slab of the girder, as it is one of the major elements where FRC can provide an increase in the element performance (compared to a conventional solution). Considering the Metrorrey transverse prestressing, FRC can effectively replace the required reinforcement to ful¿ll ultimate load case while the prestress itself provides decompression in serviceability load levels. This is possible as the internal load levels require for little amount of rebar reinforcement, which can be structurally comparable to FRC mechanical contribution, similarly to previous applications of the material, such as suspended slabs. Due to higher internal forces, in terms of ULS load-bearing capacity the transversal cross-section near the pier do not bene¿t from FRC as much as the mid-span slab although its minimum serviceability reinforcement can be reduced up to 56%, as the contribution of FRC to reduce the crack width is considerable. This could turn FRC into an attractive solution for tight crack requirements as durabil-ity demand increases., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Universities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Min-stry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

BIM and MIVES integration for sustainability assessment in viaducts

  • Jurado, Julio
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
One of the most important challenges in the architecture, engineering and construction industry is to implement sustainable development. Sustainable development seeks not to compromise the ability of future generations to meet their needs. The implementation of sustainable development involves the evaluation of the economic, environmental and social sustainability of a project. There are different methodologies that allow carrying out these evaluations or developing projects in a comprehensive way. Among the tools for the evaluation of sustainability, the “Integrated Value Model for Sustainability Assessment” (MIVES) stands out since it allows the evaluation of projects or parts thereof, considering economic, environmental and social aspects. On the other hand, the Building Information Modeling (BIM) methodology allows the joint work of all the stakeholders of a project. The integration of BIM and MIVES for the evaluation of sustainability has not been found in the literature. The objective is to develop a new methodology for evaluating sustainability in viaduct projects through the integration between BIM and MIVES. The proposed methodology is developed for viaducts since they are large-scale engineering works and involve the use of a large amount and diversity of resources., This work was partially funded by the Spanish Ministry of Economy and Competitiveness and FEDER fund (Grant No: BIA2017-86811-C2) and by the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya through Agaur (Grant No: 2017 SGR 1481) and by the “Secretaría de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) of Ecuador.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Using few accelerometer for improving the resolution and accuracy of low-cost accelerometers

  • Komarizadehasl, Seyedmilad
  • Komary, Mahyad
  • Turmo Coderque, José
  • Lozano Galant, Fidel
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
Since the Structural Health Monitoring applications are getting significant attention from scien-tists and engineers, a new system has been introduced. This device is capable of acquiring vibrations with a sampling frequency of up to 85 Hz. In this paper, the effect of having several synchronized accelerometers on a rigid plate for improving the resolution and accuracy of a new vibration acquisition system is investigated. An experimental test has been carried out to investigate the reliability of the claimed theory. Accelerometers made from combining one, two, three, four and five low-cost low-resolution accelerometers are made and tested on a shaking table. The overall results show that the number of combined accelerometers has an indirect ratio with the obtained noise density of the final product., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Gener-alitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innova-ción y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resolution improvement of low-cost MEMS accelerometer by aligning simulations sensors

  • Komarizadehasl, Seyedmilad
  • Lozano Galant, Fidel
  • Komary, Mahyad
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Nowadays, accelerometers are being used in various civil engineering applications. Their versatility made them desirable in many Structural Health Monitoring (SHM) application. A significant issue with their use is the fact that traditional commercial accelerometers are very expensive. Moreover, the low-cost solutions are not very accurate. To tackle this drawback and to enable low-cost accelerometers applicable to more SHM applications, a novel methodology for improving the resolution of low-cost MEMS accelerometers is presented in this paper. To this end the noise density level of more than one accelerometer was controlled by aligning on the same location for reading the same input wave. The results of the performed laboratory tests showed that the higher the number of aligned accelerometers the lower the reported noise. Aligning a higher number of accelerometers also improve the system's final resolution in frequency domain diagrams., The authors are indebted to the Spanish Ministry of Economy and Competitive-ness for the funding provided through the research project BIA2017-86811-C2-1- R directed by José Turma and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Use of fiber reinforced concrete in compression slabs of beam-and-slab decks for new bridge constructions

  • Domingo Tarancón, Magí
  • Ramos Schneider, Gonzalo
  • Aparicio Bengoechea, Ángel Carlos
In the last decade, Fiber Reinforced Concrete (FRC) has allowed engineers to enhance the performance of different structural concrete members. From previous experiences in building flat slabs, it has been found that FRC members are capable of withstanding loads with either none or very reduced amounts of reinforcement. It has been proven that FRC enhances the resistance capabilities of flat elements under common internal forces (bending moment, one-way shear, punching, etc.). Given the compressive behavior of top slabs in bridge decks, the amount of minimum reinforcement placed in it might be higher than required by structural analysis. Considering the use of FRC in top slabs, an increased durability and/or an important reduction of reinforcement quantities could be achieved. In this research the results of the structural behavior of a top slab for a beam-and-slab deck considering the use of FRC are presented. It has been accounted for specific bridge loads and geometry layouts not found in other structural elements, such as building slabs. The structural analysis is done by means of global numerical model of the bridge, which has led to a combined transversal flexure and compressions in the longitudinal direction of the slab. The results show that minimum reinforcement at ultimate load can be slightly reduced (ranging from 12 to 18%) while providing an enhanced cracking control, which would turn into a durability performance increase of the slab., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Uni-versities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Ministry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Models for evaluating shear strength on members with circular cross section

  • Turmo Coderque, José
  • Ramos Schneider, Gonzalo
  • Aparicio Bengoechea, Ángel Carlos
Solid circular columns are often used as structural supports in bridges, buildings and foundations due to their simplicity of construction and because their strength is similar in any direction. This deem them very suitable to resist wind and seismic loads. Hollow core circular concrete members are much less structurally used than solid circular cross sections. However, these can be found in concrete chimneys, concrete pipes and elevated water tanks, as well as in large bridge columns and offshore platforms. Codes do not usually propose specific formulations for evaluating the shear strength of such structural types or if they do, they do so in a very simplified manner. Hence, an analytical model for evaluating the contribution of the transverse reinforcement in concrete members of solid and hollow circular cross section is presented in this paper. After a thorough bibliographic research on the previous studies on the matter, the shortage of work accomplished on the topic has been assessed and the unsolved problems identified. A formula for evaluating the shear transferred by spiral reinforcement in solid members is presented. A formula for the calculation of hollow core circular columns with both vertical and spiral reinforcement is also deduced. Assumptions made for the calculation of this formulation have been deduced theoretically and then checked empirically. Hence, shear tests on circular hollow core specimens will be also presented., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Developing and validation of an inclinometer sensor based on fusion of a magnetometer, an accelerometer and a gyroscope sensor for SHM applications

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Ramos Schneider, Gonzalo
  • Torralba Mendiola, Víctor
Structural Health Monitoring (SHM) programs play a critical role in civil engineering, par-ticularly for evaluating safety conditions and forecasting the strength of large structures such as bridges. Therefore, employing low-cost sensors with implementing different techniques to improve their accuracy compared to high-cost accurate sensors has attracted much attention for structural assessments. In fact, with adequate code and the proper mode to utilize their features and potentials, there is a probability of acquiring valuable data from these low-cost sensors, which can provide helpful insight for the SHM systems. Hence, this study proposes the use of a low-cost circuit for angular measurements based on the fusion of an acceler-ometer, a gyroscope, and a magnetometer sensor with an Arduino board. In this study, firstly, an introduction through Arduino due and the used sensor is presented. Then angular data acquisition problems, as well as their respective solutions, are presented., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the fund-ing provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADE-HASL by Agencia Estatal de Investigación del Minis-terio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Study of Iranian engineering educational system

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
One of the main features of each society and civilization is the importance of educational system. All countries around the world have used specific educational planning for growing their people as well as developing the country. This paper has comprehensively evaluated civil engineering educational program in universities oflran. In the current system, tendencies of graduates are more toward education of engineers who are ready to have academic jobs but not operative jobs such as increasing and improving national production or meeting technical needs of country. One strategy that can be used in this context is having long term planning for civil engineering students, which includes increasing the budget for establishment of equipped laboratories and at the same time enhancing professional job opportunities., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-l-R, and BIA2017-8681 l-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Full review of low-cost electronics implemented in structural health monitoring applications for bridges

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Ramos Schneider, Gonzalo
  • Tošić, Nikola
  • Turmo Coderque, José
  • Torralba Mendiola, Víctor
Recently Structural Health Monitoring (SHM) is attracting so much attention due to the global structural stock’s growing era. SHM is a system including sensors and management algorithms that provide non-destructive in-situ information about a structure’s performance condition or health. Therefore, lately, the demand for adopting low-cost sensors for static or dynamic Structural System Identi¿cation (SSI) has increased. This paper introduces and evaluates different low-cost sensors mainly used in the bridges SHM applications. Firstly, the Ardu-ino Uno, which is the programmable logic controller, and diverse sensors such as Ultrasonic, Laser, Gyroscope, Accelerometer, Temperature-humidity were introduced. Secondly, different tests were applied in controlled ambi-ent situations to identify dif¿culties during sensor installation and data acquisition. This study presents solutions for encountered problems in order to use these low-cost electronic devices ef¿ciently for SHM purposes., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo.This project was funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been pro-vided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Calibración de herramientas heurística para la optimización del proceso de tesado de puentes atirantados, Calibration of heurist tool parameters for the optimization of tensioning process of cablestayed bridges

  • Gisbert Doménech, Carlos Miguel
  • Lozano Galant, José Antonio
  • Payá Zaforteza, Ignacio Javier
  • Turmo Coderque, José
El diseño y la materialización del proceso constructivo es uno de los aspectos más complicados en proyecto de los puentes atirantados. En la mayoría de las estructuras este proceso se define en base únicamente a la experiencia del proyectista sin optimizar el comportamiento estructural de ningún elemento del puente. En este artículo se propone la optimización del proceso de tesado de puentes atirantados mediante la utilización de algoritmos heurísticos. Uno de los principales inconvenientes de este tipo de herramientas es el hecho de que la solución depende, en mayor o menor medida, de los parámetros del algoritmo. Para determinar estos parámetros, tradicionalmente se realizan numerosas combinaciones aleatorias de estos parámetros. Sin embargo, y pese a su elevado coste computacional, este procedimiento no permite garantizar que se haya encontrado la combinación óptima de estos parámetros. Para solucionar este problema, el presente artículo propone la aplicación de las técnicas de diseño de experimentos para calibrar los parámetros de las herramientas de optimización heurística con un reducido coste computacional. La metodología propuesta se valida mediante la optimización del proceso de tesado de un puente atirantado., Los autores desean agradecer el apoyo proporcionado por el Ministerio de Economía y competitividad, por los proyectos de investigación BIA2013-47290-R, BIA2017-86811-C2-1-R y BIA2017-86811-C2-2-R financiados con fondos FEDER., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of low-cost angular measuring sensors

  • Komarizadehasl, Seyedmilad
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
One of the main issues for performing Structural Health Monitoring (SHM) is the high cost of metering devices. In order to make it applicable to the conventional structures with low defined budgets, low-cost sensors have been widely utilized. In this paper, the characteristics of a low-cost circuit (MPU9250) with low power consumption for measuring angles are studied. This circuit is composed of an accelerometer, a gyroscope, and a magnetometer. There are two ways of coding and using this sensor for angular measurements. In the first application, the accelerometer and the gyroscope of the circuit are only used to get angle around X and Y-axis. In the second application, the gyroscope is going to be added to the other two sensors in order to get angular measurements of all axis. The data accuracy plus the advantages and disadvantages of the response of this circuit regarding each code has been studied in this paper by using the codded sensor in some experiments. Although the second application showed less error from the expected results, it was less stable than the first application., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A review on low-cost sensors compatible with open-source platforms used for life-cycle monitoring of civil structures

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Turmo Coderque, José
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
  • Xia, Ye
Lately, the need for adopting sensors in buildings and infrastructures for monitoring and inspection of the health state of those structures is increasing. This demand is due to the increasing age of the structural stock worldwide. Consequently, more economical ways of Structural Health Monitoring applications are getting huge attention. This paper presents and evaluates several low-cost electronics compatible with open-source digital technologies for static and dynamic Structural System Identification applications. Firstly, an open-source microcontroller (Arduino), the main programable logic controller, and a Raspberry pi, a small single-board computer, are introduced. Secondly, various economic sensors with diverse measurement applications, such as ultrasonic and laser ranging, acceleration, temperature, and humidity, are discussed. Thirdly, multiple experiments in different controlled ambients are applied to assess and compare their tolerances as well as advantages and disadvantages of their use, among their price. Some problems with the Arduino codes and sensor positions emerged during the installation of the sensors and the data collection process. Finally, to attain an effective manner of using these low-cost electronics, this article offers answers to the issues faced., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo.This project was funded with FEDER funds. Authors are also indebted to the Secre-taria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimal sensor placement methods and criteria in dynamic testing: comparison and implementation on a pedestrian bridge

  • Lizana Vilaseca, Marc
  • Casas Rius, Joan Ramon
Structural health monitoring (SHM) is being widely used for the safety assessment and management of existing bridges and structures. One of the objectives related to SHM is to maximize the information gained from the structural testing, while keeping the number of sensors and consequently the cost of the sensor system to a minimum. The current work investigates four of the most influential optimal sensor placement (OSP) methods: the modal kinetic energy (MKE) method, the effective independence (EFI) method, the information entropy index (IEI) method and the MinMAC method. The methods were developed in MATLAB and used as input data the modal analysis results of a finite element model built in ANSYS of the Streicker Bridge, a pedestrian bridge located on the Princeton University Campus. The resulting sensor positions were estimated for a configuration with 14 sensors, and the four OSP methods were evaluated for different numbers of target sensors in terms of different OSP criteria: the determinant (DET) of the Fisher information matrix, the information entropy index (IEI) and the root mean square (RMS) of the off-diagonal entries of the MAC matrix. The study indicates that the EFI method should be chosen to estimate the optimal sensor positions as it provides the largest amount of information with a relatively low computation time., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481)., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Final overview of COST Action TU1406: quality control of existing bridges

  • Casas Rius, Joan Ramon
Across Europe, the need to manage roadway bridges efficiently led to the development of multiple management systems. Despite presenting similar architectural frameworks, the condition assessment procedure is one of the difference that distinguishes them. This dissimilarity constitutes a divergent mechanism that has direct interference in the decision making process leading to considerable variations in roadway bridges quality. COST Action TU1406 aims to institute a standardized roadway bridges condition assessment procedure. Such purpose requires the establishment of recommendations for the quantification of performance indicators, the definition of performance goals and a guideline for the standardization of quality control plans for bridges. By developing new approaches to quantify and assess bridge performance, as well as quality specifications to assure expected performance levels, bridge management strategies will be significantly improved, enhancing asset management of ageing structures in Europe. The work developed and achieved by COST Action TU1406 will be presented., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Determination of environmental parameters based on Arduino based low-cost sensors

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Taking into account that the age of structures is closely connected to their energy consumption, the monitoring of structures is a crucial task for engineers. This article deals with application of Arduino based low-cost sensors for environmental monitoring ofbuildings. To do so, open source platform Arduino as well as four environmental sensors, DHT22, have been used for measuring variation of temperature and humidity. In order to check accuracy of the utilized data acquisition system, statistical approach was used to check the repeatability and discrepancy of the recorded data. Statistical calculations indicate that the sensor is more accurate in terms of measuring temperature rather than humidity one since discrepancy of the temperature parameter is less than the humidity one. Toe maximum range of standard deviation derived for temperature and humidity parameters are less than 0.13 and 1.33 respectively., Toe authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

BIM and MIVES integration for sustainability assessment in viaducts

  • Jurado, Julio
  • Fuente Antequera, Albert de la
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
One of the most important challenges in the architecture, engineering and construction industry is to implement sustainable development. Sustainable development seeks not to compromise the ability of future generations to meet their needs. The implementation of sustainable development involves the evaluation of the economic, environmental and social sustainability of a project. There are different methodologies that allow carrying out these evaluations or developing projects in a comprehensive way. Among the tools for the evaluation of sustainability, the “Integrated Value Model for Sustainability Assessment” (MIVES) stands out since it allows the evaluation of projects or parts thereof, considering economic, environmental and social aspects. On the other hand, the Building Information Modeling (BIM) methodology allows the joint work of all the stakeholders of a project. The integration of BIM and MIVES for the evaluation of sustainability has not been found in the literature. The objective is to develop a new methodology for evaluating sustainability in viaduct projects through the integration between BIM and MIVES. The proposed methodology is developed for viaducts since they are large-scale engineering works and involve the use of a large amount and diversity of resources., This work was partially funded by the Spanish Ministry of Economy and Competitiveness and FEDER fund (Grant No: BIA2017-86811-C2) and by the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya through Agaur (Grant No: 2017 SGR 1481) and by the “Secretaría de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) of Ecuador., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The dynamic assessment of structural condition by measurement error-minimizing observability method

  • Peng, Tian
  • Casas Rius, Joan Ramon
  • Turmo Coderque, José
The structural identification using dynamic parameters (such as the natural vibration frequencies and mode shapes of the structure) is an important issue especially in slender structures such as long-span bridges or high-rise buildings. It is the most popular way to assess the structural condition along the service life . This article presents a new approach, under the framework of Structural System Identificaction by Observability Method (OM), to perform the structural system identification. The method is able of determining which actual structural properties (like Young’s modulus, area, inertia, mass) can be uniquely detected when an appropriate subset of mode-shapes and frequencies of the whole structure is provided. Error-Minimizing Observability Method (EMOM), which separates and merges the error items included in frequencies and mode shapes, is used to get an accurate estimate of element properties. A key issue in this method is how to choose the weight factor of frequencies and mode-shapes, when minimizing the objective function. This is still an unsolved problem and will pose a big influence on the results. Hence, a 2-dof example is illustrated in the paper dealing with this issue. . From the analysis of frequencies and mode-shapes with the best weight factor, it is found that through the fine calculation, the weight factor produced by the Bayesian method fits well with the one derived with the regular one-by-one calculation. This provides a criteria to choose the weight factor directly from the experimental samples by the Bayesian approach, thus decreasing the complexity and the computing time., This work is funded by the Spanish Ministry of Economy and Competitiveness projects (BIA2013-47290-R and BIA2017-86811-C2-1-R) and China Scholarship Council (No. 201808390083). The financial support is greatly appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Practical application of low-cost sensors for static tests

  • Komarizadehasl, Seyedmilad
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Structural Health Monitoring (SHM) is essential to assess the accuracy of durability predictions of structures. Using low-cost sensors on structural evaluation has gained significant attention compare to high-cost sensors. Although these may not be as accurate and sensitive as the expensive electronic devices, with efficient code and right use, there is a possibility of getting useful information from them. These sensors can vary based on their functionality and the measurements they provide. For example, one is highly sensitive to the light of its environment while the other kind would give different results in different temperatures. In this paper, three different displacement measuring sensors have been studied. An ultrasonic sensor (HC-SR04) and two different types of laser sensors (VL53L0X and VL53L1X) are investigated in the paper. An Arduino Mega has captured their measured data, and a raspberry pi has made the acquisition. Not only issues regarding coding and placing of these sensors have been presented ultimately, but precise solutions for the aforementioned problems as well as an efficient way of assembling all the sensors are also presented in this paper. The data generated from these electronic devices can be used for Structural Health Monitoring applications., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost accurate acceleration acquisition sensor

  • Komarizadehasl, Seyedmilad
  • Komary, Mahyad
  • Turmo Coderque, José
  • Torralba Mendiola, Víctor
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
Nowadays, accelerometers are used widely by civil engineers for Structural Health Monitor-ing (SHM) purposes. The expensive cost of acquisition equipment and accelerometers have made the SHM applications unavailable for structures with relatively low budgets for their assessment. A new accelerometer has been proposed in this paper. This accelerometer is a uniaxial accelerometer with a sampling frequency of up to 85Hz. Although the proposed accelerometer is 17 times cheaper than a traditional accelerometer (PCB 393A03), it provides a better resolution and accuracy at the same time. An experimental test has been carried out for comparing the proposed accelerometer with PCB 393A03 sensor., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Inves-tigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Acceleration data quality assessment for bridge structural health monitoring via statistical and deep-learning approach

  • Zhong, Huaqiang
  • Sun, Limin
  • Turmo Coderque, José
  • Xia, Ye
In recent years, the safety and comfort problems of bridges are not uncommon, and the operating conditions of in-service bridges have received widespread attention. Many large-span key bridges have installed structural health monitoring systems and collected massive amounts of data. Monitoring data is the basis of structural damage identification and performance evaluation, and it is of great significance to analyze and evaluate its quality. This paper takes the acceleration monitoring data of the main girder and arch rib of a long-span arch bridge as the research object, analyzes and summarizes the statistical characteristics of the data, summarizes 6 abnormal data conditions, and proposes a data quality evaluation method of convolutional neural network. This paper conducts frequency statistics on the acceleration vibration amplitude of the bridge in December 2018 in hours. In order to highlight the end effect of frequency statistics, the whole is amplified and used as network input for training and data quality evaluation. The results are good. It provides another new method for structural monitoring data quality evaluation and abnormal data elimination., This paper is supported by the National Key R&D Program of China (2019YFB1600702), the National Natural Science Foundation of China (51978508), and the Ministry of Hosing and Urban-Rural Development (K2019690). The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modelling the construction of cable stayed bridges stressed with the strand by strand technique

  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The temporary supports erection method is the most common way of building cable-stayed bridges. In this technique the bridge deck is first built over a set of temporary and permanent supports. Then, during the tensioning process, the stays are successively placed and tensioned by the jacks and the deck is raised from the temporary supports. Several variants of this method are the launching of the bridge and the rotation method. This paper proposes an algorithm to calculate and to control the construction of such bridges when the strand by strand tensioning technique is used. It is based on the unstressed length of the stays concept. The use of such concept enables a fast and direct simulation of construction stages by analysing independent Finite Element Models. As there is no need of superposition of models it is a very convenient way for construction supervision., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmark model updating for cable stayed bridges

  • Lai, Minghui
  • Ma, Haiying
  • Sun, Pingkuan
  • Turmo Coderque, José
The use of benchmark model aims to establish a model with sufficient accuracy to reflect structure performance. Its purpose is seeking differences through repeated studying on problems using common FE model. In the paper, a novel approach is proposed for the benchmark model updating of a cable stayed bridge. It is based on the interaction of numerical analysis program and FE analysis program with updating model parameters from loop iteration operation. Shell elements and beam elements are both used, and the natural vibration frequencies and mode shapes from plate-shell element model are determined. These are used to modify the parameters used in a spine-beam element model, and to simplify a complicated FE model as a benchmark model. The genetic algorithm (GA) is introduced to complete the calculation process of loop iteration. Finally, an updated benchmark model is proposed for cable stayed bridges., The authors are indebted to research funding provided by the National Key R&D Program of China (2017YFC1500603), and to the Spanish Ministry of Economy and Competitiveness and FEDER funds for the funding provided through the research project BIA2017-86811-C2-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comparison of different low-cost sensors for structural health monitoring

  • Komarizadehasl, Seyedmilad
  • Turmo Coderque, José
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
Recently, the need for Structural Health Monitoring (SHM) and inspection is growing as a result of the increasing age of the structural stock worldwide. SHM includes bringing into use a sensor or an array of sensors into an engineered structure. This paper evaluates the practical aspects to consider when choosing different low-cost sensors for using in a SHM application. For this reason, a microcontroller (Arduino) with attached sensors (Ultrasonic, Laser, Gyroscope, Accelerometer, Temperature-humidity, SD-module) has been used throughout different controlled ambient situations and experiments. During the sensor installation and data acquisition, some issues related to the Arduino codes and position of the sensors arise. In this article solutions for tackling faced problems have been presented for achieving an efficient way of using these electronic devices. Their data have been collected to assess and compare their tolerances as well as advantages and disadvantages of their use, cost among them. The information from this article could be used either to choose the appropriate sensors either for static or for dynamic Structural System Identification (SSI)., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this re-search has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Inves-tigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Beneficial effect of combining similar low-cost accelerometer to improve the overall accuracy and noise density

  • Komarizadehasl, Seyedmilad
  • Alahmad, Ahmad
  • Lozano Galant, José Antonio
  • Torralba Mendiola, Víctor
  • Ramos Schneider, Gonzalo
  • Turmo Coderque, José
Structural Health Monitoring applications are receiving more and more attention nowadays. The epidemic problem with these evaluations is their high cost. For applying them to structures/ infrastructures with a low budget of SHM evaluations, low-cost sensors must be taken into account. However, low-cost accelerometers have higher noise density ratios which affect their accuracy and resolution. Using filters or post-processing methods alters the acquired information of the accelerometers. This article aims to enhance the accuracy and resolution of low-cost sensors by improving and controlling the spectral noise level through active noise improvement. This improvement is studied in this paper and supportive laboratory experiments have been illustrated., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental verification of a novel accelerometer intended for structural health monitoring of bridges

  • Komarizadehasl, Seyedmilad
  • Alahmad, Ahmad
  • Lozano Galant, José Antonio
  • Torralba Mendiola, Víctor
  • Ramos Schneider, Gonzalo
  • Turmo Coderque, José
Bridges can be considered one of the most critical infrastructures of any country. Subsequently, their health state assessment is of great importance. However, durable monitoring of bridges can be highly costly and time-consuming. In addition, the current Structural Health Monitoring applications are only applicable to individual structures with a high budget for their health assessment. For a long-term economic evaluation of bridges, low-cost sensors are currently being developed for SHM applications. However, their resolution and accuracy are not yet suitable for structural system identifications. For that, a novel accelerometer based on Arduino technology is introduced in this work. Experiments show that this accelerometer has a better resolution. Illustrated test results of this paper on a frequency range of 0.5 to 8 Hz validate the performance of the proposed accelerometer., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d' Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Dynamic observability method for durability assessment considering measurement noise

  • Peng, Tian
  • Casas Rius, Joan Ramon
  • Turmo Coderque, José
Due to the inevitable degradation of material properties in structures in daily use, such as stiffness degradation due to cracking in concrete elements, their durability will definitely be influenced, and their serviceability and safety could be in danger. Thus, understanding and identifying the change in the structural parameters provides new approaches to evaluate their durability. Structural system identification by dynamic observability method, which is using subsets of masses, natural frequencies and modal shapes, is a powerful tool to detect the change of structural parameters. Taking into account the presence of noise in the measurement data in real world structures, this method establishes the relative dynamic equation with the error separation items. The equation is solved by error minimization of an objective function combining the measured frequencies and mode shapes through the parameter MAC (Modal Assurance Criterion). Additionally, the algorithms and the steps are introduced based on the dynamic eigenvalue equation, which can fully demonstrate the performance of observability techniques. The present paper provides an example on how to successfully identify structural parameters. Its suitability for practical applications is demonstrated in a large frame structure. The result is a much more accurate identification of the parameters involved in the durability of the structure even in the case of noise-corrupted measurement signals., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R and BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. It is also to be noted that the part of this work was done included an exchange of faculty financed by the Chinese government to Mrs.Peng thorough the program (No. 201808390083)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Environmental monitoring system based on low-cost sensors

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Temperature and humidity measurements provide useful information on multiple areas of civil engineering application such as Structural Health Monitoring (SHM), Structural System Identification (SSI) and structures rehabilitation. Majority of the existing commercial systems are so costly and also these measurement paradigms need many reference spots for a full-scale structure. The aforesaid paradigms are based on collecting data through smart devices, transferring information to each other and in the final stage processing the obtained information collaboratively through cloud computing or the others technologies. Taking into account the above information and obstacles, utilizing the Open Source Platforms (OSP) microcontrollers like Arduino as well as low cost sensors are attracting more and more attention. This paper gives a comprehensive information about the most determinant aspects of the aforementioned kits in terms of their pros and cons, installation procedure, communication protocol, number of the required connections and specific characteristics of the data acquisition system., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive description of a Low-Cost Angular Data Monitoring System

  • Komarizadehasl, Seyedmilad
  • Turmo Coderque, José
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
Structural Health Monitoring (SHM) is basic to survey the exactness of strength forecasts of structures. Utilizing low-cost sensors on structural assessment have increased in contrast with using high-cost sensors. Although these may not be as exact and accurate as of the costly electronic gadgets, with an effective code and right use there is a probability of getting helpful data from them. The information produced from these low-cost sensors can provide useful insight for the SHM systems. In this paper problems regarding angular data acquisition together with their respective solutions are presented. Not only issues regarding coding and placing of these sensors have been presented completely, but precise solutions for the aforementioned problems as well as an efficient way of assembling and preparing the sensors have also been presented. The proposed circuit is composed of an accelerometer, a gyroscope, a magnetometer, an Arduino board and a Laptop, as an information recorder and moderator., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding pro-vided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the fund-ing provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZA-DEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Strain-monitoring of a concrete tunnel lining with distributed optical fiber sensors

  • Gómez i Esteve, Judit
  • Casas Rius, Joan Ramon
  • Villalba Herrero, Sergi
Despite their advantageous performance and reliability, distributed optical fiber sensors (DOFS) still constitute a recent technology and their reliability and accuracy when applied to real world structures is still under probation since there is still room for improvement and for widening their applicability. In general, standardized guidelines need to be developed to ensure success in every DOFSs deployment regarding fiber bonding to the structure, temperature affections on readings, postprocessing of reading anomalies, among other factors. However, real applications, as in the one presented in this paper, show that DOFS are anticipated to have a very important role in Structural Health Management of tunnels in the near future if correctly understood and developed. This paper addresses the implementation of a Distributed Optical Fiber Sensor system (DOFS) to the existing TMB L-9 metro tunnel in Barcelona for Structural Health Monitoring (SHM) purposes as the former could potentially be affected by the construction of a nearby residential building. The results show a good performance of this novel technique in the monitoring of strain along the whole affected sections during the construction of a nearby building. In fact, the DOFS readings reproduce very accurately the tunnel deformation process. The tendencies observed by the sensors were forecasted by a simple theoretical model. The monitoring of the strain at many points in the critical section allowed to conclude that the nearby construction only slightly affected the lining stresses and that safety was guaranteed during the whole monitored period., The authors thank COTCA and TMB respectively for providing access to the necessary data regarding the case study and supporting this research. We would also like to thank Ph D student Mattia F. Bado who provided insight that greatly assisted this research during the data post-processing phase. The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481)., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Accelerated viaduct construction

  • Turmo Coderque, José
Modern geometrical requirements for high capacity ground infrastructure, as highways or high speed train lines, imply increasing number of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Among them, a very popular one for medium span concrete viaducts is the span by span construction with movable scaffolding system. The method can be easily adapted to any geometry and, from an environmental point of view, only the shadow of the deck is spoilt during construction periods. Since its first application in the Kettiger Hangbrücke, (Germany) in 1959, this construction method has been applied extensively all around the world. The paper will describe the pros and cons of the method and will explain in detail the last developments made in order to reduce to a minimum the critical path, increasing its competitiveness. New construction sequences, non-standardized structural details, static and dynamic tests, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the method., The author are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2, funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Spain, for the funding provided through Agaur (2017 SGR 1481). The author wants to thank also Mr. Roberto Soto, from Mecanotubo S.A., for all his support., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the impact of using Fiber Reinforced Concrete on service life of bridges: a case study

  • Domingo Tarancón, Magí
  • Ramos Schneider, Gonzalo
  • Aparicio Bengoechea, Ángel Carlos
During the last decades the use of ¿ber reinforced concrete (FRC) has been increasing and extending to different areas where structural responsibility was required, being the latest research focused on sus-pended slabs only made of FRC. This could suggest that more ¿elds of concrete structures could bene¿t from this material, including bridges. This paper presents the research about a bridge design considering FRC. An assess-ment on how the material can in¿uence both design strength and expected service response is given (sectional strength and crack width). The existing Line 2 Metrorrey’s viaduct is used as reference to perform the structural analysis and design, where both conventional and ¿ber reinforced concretes are evaluated. The bridge is modeled and analyzed by means of standard numerical analysis and current code regulations are used to obtain preliminary ultimate and serviceability design loads. The assessment of the bridge is mainly based on the veri¿cation of the bottom slab of the girder, as it is one of the major elements where FRC can provide an increase in the element performance (compared to a conventional solution). Considering the Metrorrey transverse prestressing, FRC can effectively replace the required reinforcement to ful¿ll ultimate load case while the prestress itself provides decompression in serviceability load levels. This is possible as the internal load levels require for little amount of rebar reinforcement, which can be structurally comparable to FRC mechanical contribution, similarly to previous applications of the material, such as suspended slabs. Due to higher internal forces, in terms of ULS load-bearing capacity the transversal cross-section near the pier do not bene¿t from FRC as much as the mid-span slab although its minimum serviceability reinforcement can be reduced up to 56%, as the contribution of FRC to reduce the crack width is considerable. This could turn FRC into an attractive solution for tight crack requirements as durabil-ity demand increases., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Universities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Min-stry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Detailed evaluation of low-cost ranging sensors for structural health monitoring applications

  • Komarizadehasl, Seyedmilad
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
To evaluate the safety of structures, choosing a proper maintains protocol to assess the performance/ workability of the structures in the future, Structural health monitoring (SHM) applications are required. The SHM application usually applies to unique structures with high budgets. For using them on structures with low-budgets low-cost sensors required. Low-cost sensors are getting considerable attention compared with the expensive traditional alternatives. This paper introduces 3 types of low-cost displacement measuring sensors. These sensors were programmed and controlled by an Arduino. Acquiring data from them was done by a connected computer to the Arduino. By engaging these sensors in a few experiments and evaluating their responses, their functionality and accuracy in different situations are investigated. Moreover, the pros and cons of each one of them for each test are illustrated. By taking into account their price, their advantages on exceptional circumstances, and their reliability, different sensors for different situations have been proposed., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017- 86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for MR. Seyedmilad Komarizadehasl by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Finite fault source model for ground motion near fault zone

  • Qiu, Yuan
  • Ma, Haiying
  • Xia, Ye
  • Lai, Minghui
  • Turmo Coderque, José
  • Lozano Galant, José Antonio
Ground motion is categorized into near fault zone and across fault zone where impulsive component is included. The impulsive component usually causes larger damage than that by far-fault ground motion. To build a Benchmark model platform for cable-stayed bridges across-fault region for comparative analysis, the paper proposes a way combining the finite fault source model. In the paper, the finite fault source model was conducted based on the site Qiongshan earthquake. After the geological structural parameters were determined, forward modeling of near site earthquake was carried out, and the observation points were obtained using numerical simulation. Then, the analysis results were compared with the pulse characteristic parameters of similar grade of recording ground motion. Additionally, the ground motion near-fault region was analyzed to validate the finite fault source model., The authors are indebted to research funding provided by the National Key R&D Program of China (2017YFC1500603), and to the Spanish Ministry of Economy and Competitiveness and FEDER funds for the funding provided through the research project BIA2017-86811-C2-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Industrialized construction of medium span concrete bridges using movable false work

  • Turmo Coderque, José
Modern geometrical requirements for high capacity ground infrastructure, as highways or high-speed train lines, imply increasing numbers of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Long viaducts are usually solved by means of medium span concrete viaducts. For the sake of quality and health and safety, industrialized construction methods, as launching girders or precast construction, is usually preferred. The paper will describe the pros and cons of some construction methods using movable trusses to hold in place either the formwork or precast segments, emphasizing the possibilities of reducing the critical path. New construction sequences, non-standardized structural details, static and dynamic tests, reinforcing criteria, structural response, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the methods., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New methodology to sustainability assessment in viaducts: a case study in Cataluña, Spain

  • Jurado, Julio
  • Fuente Antequera, Albert de la
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Viaducts, like other infrastructure works, are essential for economic and social development. The construction of viaducts has been carried out for more than 4,000 years. Advances in construction technologies have allowed the development of larger and larger works. Mother requirements demands that these engineering jobs are sustainable. Therefore, they must be evaluated economically, environmentally, and socially to ensure that the resources they use do not compromise the ability of future generations to meet their needs. The evaluation can be carried out under different methodologies. However, this work evaluates a viaduct with a new methodology based on the integration between the "Integrated Value Model for Sustainability Assessment" (MIVES) and the "Building Information Modeling" (BIM). Three evaluation scenarios are presented focused on an investor's point of view, on balanced sustainability, and finally, on an economic crisis scenario. The results indicate the robustness of the method., This work was partially funded by the Spanish Ministry of Economy and Competitiveness and FEDER fund (Grant No: BIA2017-86811-C2) and by the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya through Agaur (Grant No: 2017 SGR 1481) and by the “Secretaría de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) of Ecuador., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive description of a low-cost wireless dynamic real-time data acquisition and monitoring system

  • Komarizadehasl, Seyedmilad
  • Mobaraki, Behnam
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Nowadays,low-cost sensors and acquisition devices have been emerging as an obvioussolution to many innovative applications such as Structural Health Monitoring (SHM) systems. In this paper,issues regarding dynamic data acquisition,as well as their respective solutions,are presented. Moreover, a comprehensive description through-out an inexpensive sensor network system using open-source hardware for a real-time acceleration data acquisition has beenpresented. The platform consists of an accelerometer, an Arduino board,and a computeras a data recorder and presenter. Data is recorded through an efficient microcontroller code that can provide a considerable reading frequency (up to 300Hz). Using Python, instant acceleration recording for all the threeaxes has been done. It is shown how the performance of the proposed system is efficientfor the field of SHM systems., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). It is also to be noted that funding for this research has been provided for MR. SEYEDMILAD KOMARIZADEHASL by Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cost-effective measurement equipment and data analysis tool for structural health monitoring. Case study: metro railway bridge

  • Sierra, Pablo Leonel
  • Chacón Flores, Rolando Antonio
  • Martínez García, Javier
Structural Health Monitoring (SHM) of bridges is getting special attention of infrastructure management agencies, due to its success in minimizing maintenance costs. The acquisition of structural behaviour data and its analysis to assess the structural condition are critical tasks of SHM. In this paper both are addressed. A cost - effective measurement equipment based on triaxial accelerometers is developed. It is coupled with an operational modal analysis tool that allows extracting natural frequencies, mode shapes and damping under operational loads. Both, hardware and software, are tested in a case study of a railway bridge of the Madrid Metro network. Other measurement equipments are deployed to compare results. Natural frequencies are calculated, showing a good correlation between the different systems. The obtained results provide relevant information about the global behaviour of the structure. Therefore, the proposed cost - effective solution could be used in a SHM system for continuous bridge monitoring., The first author would like to acknowledge the funding support provided by the Spanish Ministry of Uni-versities through the PhD grant program FPU (Formación de Profesorado Universitario). Additionally, all the authors are indebted to the Secretaria d’Universitats i Recerca of the Generalitat de Catalunya for the funding provided through AGAUR (2017 SGR 1481) and to the Spanish Ministry of Economy and Competitiveness and the FEDER for the funding provided through the project BIA2017-86811-C2-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Development of an accurate low-cost device for structural vibration acquisition

  • Komarizadehasl, Seyedmilad
  • Lozano Galant, Fidel
  • Komary, Mahyad
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Structural Health Monitoring (SHM) applications are getting tremendous attention from engineers; However, the expensive sensors and equipment needed for extracting the structures' modal characteristics made SHM application only applicable to singular structures with a high budget for their health assessment. For applying the SHM systems to structures with lower health evaluation budget, a new accurate and low-cost device is proposed for the measurements of structural vibrations. This is composed of five similar simultaneous accelerometers located on a same spot for measuring the same signal. For validating the accuracy of this device, laboratory experiments were carried on; subsequently, the out-puts of the proposed device were compared with two piezoelectric accelerometers (PCB 393A03 and PCB 356B18). The results of the experiments show that not only is the proposed device 14 times less expensive than PCB 393A03, but it can also acquire vibration on lower frequencies and acceleration amplitudes where the expensive sensors could not provide any outputs., The authors are indebted to the Spanish Ministry of Economy and Competitive-ness for the funding provided through the research project BIA2017-86811-C2-1- -86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria sitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Koma-rizadehasl by Spanish Agencia Estatal de Investigación grant and the Fondo Social Europeo grant (PRE2018-083238)., Postprint (published version)