Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Removal of pharmaceuticals by clay-polymer sorbents: Batch and filtration experiments

  • Undabeytia López, Tomás
  • López, V.
  • Gómez-Pantoja, Eulalia
  • Gardi, Ido
Significant concerns have been raised up due to the presence of organic micropollutants in surface waters. The ability of two polymer-clay sorbents (Tct-bent; Pnb-bent) based on a functionalized cationic starch was examined for the removal of three pharmaceuticals: atenolol (AT), sulfamethoxaxole (SMX) and diclofenac (DC). In batch experiments, the Tct-bent complex which exhibited a planar conformation of the polymer on the clay surface and higher cationic charge density showed higher sorption of DC and SMX over those of Pnb-bent but similar with AT. An analysis of the sorption by fitting to Langmuir equation showed a preferential sorption of DC over SMX on the polymer-clay complexes: lesser sorption sites (lower Ro) but more energetically favored (higher binding coefficient, KL). The sorption mechanisms of DC and SMX on Tct-bent were determined by thermal and infrared techniques: DC molecules formed an ion pair including hydrogen bonds through their secondary amine groups; SMX sorbed by strong electrostatic interactions followed by proton transfer involving its sulphon-nitrogen group and the hydroxyl moieties of the composite. Filtration experiments showed a better performance of the columns made of Tct-bent on DC and SMX over that of GAC (Figure 1). Accordingly, there are certain pollutants as those capable of protonation in solution (AT) that are sorbed on the developed hydrophobic domains of the polymer but in a smaller extension than GAC. Therefore, further studies should address the possibility of using mixed filters containing polymer-clay composites and GAC for a more efficient filtration. The filtration processes were successfully modeled by using an adsorption-convection model which enabled predictions under different operational conditions., This research was funded by the grant NANOWAT (ref. I-B/2.1/049) within the ENPICBC-MED programme of the European Union, and the Spanish Ministry of Economy and Competitiveness (project CTM2013-42306-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Pyrimethanil adsorption on montmorillonite and organo-montmorillonite. Kinetic and equilibirum study.

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
Comunicación oral presentada en la XVI International Clay Conference from the Oceans to Space 16th ICC – July, 17-21,Granada 2017, In the post-harvest treatment of pears and apples in the Argentinean Patagonia, several pesticides are used [1], including pyrimethanil (PRM), for the storage of fruits. The effluents released by the packing plants originate point source of contamination that should be treated prior to its discharge to natural water-courses. Montmorillonites (Mt) and their exchange products with quaternary ammonium salts, organo-montmorillonites (OrMt), have been used to remove this kind of contaminant [2] as well as metals [3], antibiotics [4], etc. The objective of this work was to study the adsorption of pyrimethanil on Mt and OrMt as well as the adsorption kinetics that manages the process. The adsorption isotherms were fitted to Langmuir, Freundlich and Dubinin-Radushkevitch (D-R) models. For kinetic analysis, three mathematical models were employed: pseudo first order (PFO), pseudo second order (PSO) and intra-particle diffusion model (IDM). The adsorption products were characterized by XRD and FTIR. The OrMt were prepared from didodecyldimethylammonium (DDAB) and octadecyltrimethylammonium (ODTMA) bromides at 150% of the cation exchange capacity (CEC). These adsorbents were named DMt150 and OMt149 for DDAB and ODTMA exchanged raw montmorillonite (Mt), respectively, where the number indicated the surfactant amount exchanged determined by total carbon analysis. The maximum adsorption of PRM was the following: 330, 240 and 156 μmol PRM/g clay, for DMt150, OMt149 and Mt, respectively. The large amount adsorbed by DMt150 sample was assigned to different conformational states of DDAB in the interlayer space [5], due to the presence of two hydrocarbon chains, allowing the entrance of PRM to the interlayer, and conferring greater hydrophobicity than that of OMt149. All adsorbents fitted well to the sorption models, except OMt149 sample that did not fit to Langmuir. The DMt150 sample attained the highest KF value (obtained from the Freundlich model) within the studied samples. The high PRM affinity for DMt150 sample indicated the presence of hydrophobic interactions between the PRM and the organic fraction of the OrMt. The Qmax parameter obtained with D-R model were higher than that obtained with Langmuir model for all samples. The adsorption energy values found by D-R model indicated a physisorption process for PRM adsorption on OrMt samples, supporting the hypothesis of hydrophobic or Van der Waals type interactions. The kinetics experiments indicated that the adsorption process was governed by pseudo-second order kinetics. The XRD analysis indicated an increase of the basal spacing from 1.25 to 1.39 nm for Mt sample after PRM adsorption, assigned to PRM molecules arrangement in a planar conformation. For OrMt, no changes were noticed in the interlayer space after PRM adsorption, which could indicated a shielding of PRM entrance by the presence of the surfactant. FTIR analysis showed that the secondary amino group of PRM was involved in the adsorption process. The appearance of a new band in the Mt-PRM spectra at 1579 cm-1 could indicate the formation of H-bonding through one of the pyrimidine ring nitrogen. Summarizing these results, PRM adsorption increased by the use of DMt150 and OMt149 compared to Mt due mainly to hydrophobic interactions between the PRM and the organic fraction of the OrMt samples., [1] Lombardi B., Baschini M., Torres Sánchez R.M. (2003). Optimization of parameters and adsorption mechanism of thiabendazole fungicide by a montmorillonite of North Patagonia, Argentina. Applied Clay Science, 24:43- 50. [2] Sanchez-Martin M.J., Rodriguez-Cruz M.S., Andrades M.S., Sanchez-Camazano M. (2006). Efficiency of different clay minerals modified with a cationic surfactant in the adsorption of pesticides: Influence of clay type and pesticide hydrophobicity. Applied Clay Science. 31:216- 228. [3] Sarkar B., Naidu R., Megharaj M. (2013). Simultaneous Adsorption of Tri- and Hexavalent Chromium by Organoclay Mixtures. Water, Air & Soil Pollution. 224:1704. [4] Sun K., Shia Y., Chen H., Wang X., Lic Z. (2017). Extending surfactant-modified 2:1 clay minerals for the uptake and removal of diclofenac from water. Journal of Hazardous Materials. 323:567-574. [5] Sagitova E.A., Donfack P., Prokhorov K.A., et al. (2009). Raman spectroscopic characterization of the interlayer structure of Na+-montmorillonite clay modified by ditetradecyl dimethyl ammonium bromide. Journal of Physical Chemistry B. 113:7482-7490., This research was funded by the Spanish Ministry of Economy and Competitiveness through the project CTM2013-42306-R supported by the European Regional Development Fund (FEDER ) and by the Argentine Ministry of Science, Technology and Productive Innovation, FONARSEC project, Nano FS-008/2010., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Starch-clay based composites for water purification by filtration

  • Undabeytia López, Tomás
  • Nir, Shlomo
  • Laiz Trobajo, L.
  • Morillo González, Esmeralda
  • Gardi, Ido
  • Lozano, Virginia
Significant concerns have been raised due to increasing pollution of surface and ground waters. In the vast majority of water treatment plants, depth filtration is incorporated through the use of non-compressible filters made of granular activated carbon (GAC), but the efficiency of GAC for removal of pathogens is very poor. In addition, the removal of small organic polar molecules is not usually satisfactory. Therefore, there is a growing interest in the development of composites that improve the performance of GAC or even can be an alternative to its use. The current research describes the synthesis, characterization and potential use of clay-polymer composites for their use in water purification by filtration. The advantages of these clay-polymer composites are that they can be easily scaled for production at industrial levels; and they were formed by inexpensive materials, a day mineral (bentonite), and cationic starches which are widely used as additives in paper-making, textile and cosmetic industry. These starches are derivatized by the introduction of the cationic functional moiety 2-hydroxypropyltrimethylammonium. The interactions of three polymers with different degree of substitution with the surface of a commercial bentonite were examined. Sorption of the polymers and analysis of the surface charge of the complexes formed showed that charge neutralization at the external surface was observed at loadings lower than the CEC of this day. The lower values for the point of zero charge than the CEC of the clay can be explained by the high screening of the clay surface by non-charged segments of the polycation after sorption. The loading of polymer on the clay was highest for the polymer with the lowest charge density adopting a loop-and-train conformation on the clay surface, whereas a planar conformation was elucidated for the other two higher charged polymers. Several polymer-clay complexes were synthesized and tested for the inactivation and killing of the enteroindicator Escherichia coli as a function of the polymer loading and surface charges. The critical parameters affecting the bactericidal activity were the surface potential and the concentration of cationic monomers in excess over that needed for neutralization of the clay surface. The clay-polymer composite with higher bactericidal activity was also tested for the removal of the emerging contaminants diclofenac and sulfamethoxazole. This study showed that the introduction of functional moieties that are capable to create a network of H-bonds with the pollutants promoted their sorption in addition to electrostatic interactions. Filtration experiments showed a better performance of the columns including clay-polymer composites over that of GAC for the removal of E. coli, diclofenac and sulfamethoxazole. The performance of fillers based on the composites under different constructive and operational parameters, such as the flow rate, and concentration of bacteria, or pharmaceuticals added, was investigated and modeled. The success in the modeling of these filtration processes by using an adsorption-convection model enabled predictions under different operational conditions, and economic projections based on the estimated capacity. Since regeneration of the filters was achieved by the use of dilute and inexpensive HCI or NaOCI solutions, implication is that the effective capacity of the filters is larger than that preliminary determined and consequently the price for successive water treatments will be significantly reduced., This research was funded by the grant NANOWAT (ref. [.812.1/049) within the ENPI·CBC-MED programme ofthe European Uníon; and the Spanísh Ministry of Economy and Competitiveness through the project CTM2013·42306-R supported by the European Regional Development Fund (FEDER)., Peer Reviewed