Pasar al contenido principal

RECUBRIMIENTOS MULTIFUNCIONALES MODIFICADOS CON AGENTES DE RETROALIMENTACION ACTIVA PARA LA PROTECCION DE MATERIALES Y COLECCIONES DEL PATRIMONIO CULTURAL

MAT2015-65445-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Corrosion protection of metallic substrates of historical interest by lanthanum-silica sol-gel coatings

  • García Galván, Federico
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • Villegas Broncano, María Ángeles
  • Galván Sierra, Juan Carlos
  • García Heras, Manuel
The European Corrosion Congress – EUROCORR. Applied Science with constant Awareness, September, 9-13 2018, ICE Krakow, Poland., Lanthanum compounds as doping agents in silica based sol-gel coatings can play as environmentally friendly corrosion inhibitors of metallic surfaces of interest in automotive and/or aeronautical industries. In the framework of an interdisciplinary research project the application of lanthanum-silica sol-gel coatings to metallic surfaces of historical interest is being explored for the first time. This contribution presents such application as far as four different metallic substrates are concerned: copper, bronze, lead, and steel. Coatings were prepared from tetraethoxysilane (TEOS) as precursor, distilled water for hydrolysis, absolute ethanol as solvent and HNO3 as catalyst of the hydrolysis. Two types of coatings were formulated: one of them using lanthanum nitrate as doping agent, and another one using lanthanum tri-acetate. Both coatings were deposited upon either common glass slides or metallic plates from 1.0 to 1.5 mm in thickness of copper, bronze, lead, and steel by dip coating at a constant drawing speed (2.0 mm s-1), under controlled temperature (25°C) and relative humidity (35%). Partial thermal densification was accomplished in a forced air stove at 60°C for 72 h. Low quality plates of these four metals and alloys were selected since they are among the most common substrates of metallic items of historical and Heritage interest. Once coatings were made the remaining sols were gelled at 35°C for 48 h. After that, sol-gel monoliths were powdered for characterization by Fourier transformed infrared spectroscopy (FTIR), differential thermal analysis (DTA) and thermogravimetry (TG). A set of sol-gel coating/metal systems was coated with transparent polyvinylbutyral films to simulate commercial top-coatings. Coatings thickness was evaluated by the interference fringe method. The corrosion resistance of both types of lanthanum-silica sol-gel coatings was studied through cathodic delamination tests and electrochemical impedance spectroscopy (EIS) measurements carried out during immersion of coated samples into a 0.6 M NaCl aqueous solution. In addition, chemical and optical quality was also evaluated by weathering and resistance tests. Microstructure was studied by field emission scanning electron microscopy (FESEM). The results indicate that a concentration of 1 mol % of La2O3 respect to the sol-gel coating formulation is adequate for La3+-ions to remain entrapped in the pores and interstitial sites of the silica matrix and thus behave as active corrosion inhibitors that are released when the metal/coating system is set in contact with the aqueous solution. Moreover, the precipitation of insoluble lanthanum products provides a self-healing mechanism which later plays as a protective barrier for the delay of early corrosion. The electrochemical study by joined cathodic delamination tests and EIS has proved to be very effective in evaluating not only the inhibitor effect of lanthanum compounds but also their self-healing properties., Projects ref. MAT2015-65445-C2-1-R and MAT2015-65445-C2-2-R. Program Geomateriales 2 (S2013/MIT 2914 CAM EU) (Dr. J. Peña-Poza contract).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Electrochemical and microstructural study of La-based protective coatings on metal substrates

  • Doménech-Carbó, A.
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
This is an Accepted Manuscript of a book chapter published by CRC Press in Science and Digital Technology for Cultural Heritage: Interdisciplinary Approach to Diagnosis, Vulnerability, Risk Assessment and Graphic Information Models on 2019, available online: http://www.routledge.com/9780367363680., Proceedings of the 4th International Congress Science and Technology for the Conservation of Cultural Heritage (TechnoHeritage 2019), March 26-30, 2019, Sevilla, Spain., The conservation of metallic items in museums and other Cultural Heritage sites need direct protection, e.g. by means of coatings able to delay the advance of corrosion. This work describes the electrochemical study ( voltammetry of immobilized particles) of a set of metal slabs of copper, brobze, lead and steel protected with La(No3)3 or La (AcO3)3 silica based sol-gel coatings subjected to different induced corrosion tests aimed at detecting changes in the metal probes. Microestructural features of coated and uncoated areas after the ageing treatments were studied by field emisison scanning electron microscopy, The results pointed out the doped coatings ability to behave as an effective protective strategy in the ease of copper, bronze and lead substrates, acting as a barried effect and/or by means of a self-healing mechanism- However, steel samples need thicker coatings since small pits were detected on the coated surface., Financial support of MINECO/FEDER MAT2015-65445-C2-2-R and TOP Heritage re. P2018/NMT-4372 (CAM-EU). Professional support of TechnoHeritage Network on Science and Technology for the Conservation of Cultural Heritage, Peer reviewed