Pasar al contenido principal

NUEVAS ARQUITECTURAS HIBRIDAS MEDIANTE ENSAMBLADO CONTROLADO DE NANOMATERIALES

MAT2015-71117-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of colored geopolymers using Maya blue-based pigments

  • Ouellet-Plamondon, C.
  • Aranda, Pilar
  • Favier, A.
  • Habert, G.
  • Van Damme, H.
  • Ruiz-Hitzky, Eduardo
Poster presented at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016. S6: application and treatment of clays and other industrial minerals., Geopolymers are inorganic amorphous silicon-based polymers materials of increasing scientific and industrial interest especially for engineering applications. Diverse types of clay minerals are currently explored as source in the production of such materials which are prepared at very high pH media. For certain applications it would be interesting to produce colored geopolymers, however the direct incorporation of organic dyes was not easy as they may become degraded under the extreme basic conditions used during the synthesis. In this communication, we will report a new approach that uses the concept of ancient Maya Blue pigment to encapsulate diverse organic dyes in the structural tunnels of the fibrous clay to be protected once incorporate as a pigment during the geopolymer formation. Sepiolite is relatively stable in basic media and dyes such as methylene blue (MB) and methyl red (MR) present a convenient size to be adsorbed in the clay inside its structural nanopores. In this way, when the geopolymer is formed the encapsulated organic dye is preserved and the final products show colors that made fade a little with the evolution of the polymerization reaction but remain still persistent with time once the reaction ends. The resulting colored geopolymers are highly stable to treatments with hydrogen peroxide, UV irradiation or in acid conditions. This preliminary study [1] is a first example that may open way to other approaches for functionalizing inorganic binder materials with organic elements sensitive to thermal treatments used in conventional ceramic processing., CICYT (Spain, project MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Layered double hydroxide/sepiolite heterostructured materials: preparation and applications

  • Aranda, Pilar
  • Gómez Avilés, Almudena
  • Rebitski, Ediana P.
  • Darder, Margarita
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016. S6: application and treatment of clays and other industrial minerals., There is an increasing interest in the development of nanostructured materials based on the combination of diverse type of inorganic particulate solids with the aim to produce a new generation of functional materials for diverse applications. In this context, fibrous clays have been used as support of nanoparticles, as for instance metal oxides (e.g., TiO2, Fe3O4,..). This communication will introduce a new type of heterostructured materials in which layered double hydroxides (LDH) are assembled to sepiolite fibrous clay [1]. In this way, Mg-Al and Zn-Al LDH have been generated in presence of sepiolite clay, becoming linked to the fibrous silicate through the silanol groups present at its external surface. The synthesis procedure allows to tune the sepiolite:LDH relative ratio, being also possible to prepare the LDH in the presence of anionic organic species to produce the corresponding intercalation compounds. Changes in the textural properties deduced from the N2adsorption-desorption isotherms can be interpreted by the effect of sepiolite for providing a stable support where nanometric LDH particles remain attached decreasing the amount of N2 adsorbed and therefore its specific surface area. This methodology has been patented [2] and it is now applied to the preparation of diverse materials that can be of interest in diverse areas of application. For example, MgAl-LDH heterostructures show the preservation of adsorption properties ascribed to both type of inorganic components with the possibility of adsorbing simultaneously both cationic and anionic species. This has been tested in the removal of various dye pollutants. The thermal transformation of assembled ZnAl-LDH in the corresponding mixed metal oxide shows the presence of the generated nanoparticles that remain bonded ontothe silicate, confirming the interest of the approach in view to prepare highly disperse metal oxide catalysts supported on sepiolite using LDH of different composition as precursors. The assembled LDH preserves its ion-exchange capacity which can be profited to incorporate anionic species useful for other applications. Thus, the anionic herbicide known as MCPA (2-methyl-4-chlorophenoxyacetic acid) has been intercalated in the supported LDH by ion-exchange as well by co-precipitation of the LDH in presence of MCPA and the clay. The release of the herbicide from these heterostructured materials has been tested in comparison to that from the herbicide intercalated in the LDH alone., CICYT (Spain, project MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced ecological applications of clay minerals

  • Ruiz-Hitzky, Eduardo
Plenary lecture given at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016., Nowadays advanced materials derived from clay minerals with potential applications in many diverse fields are under study and development following certain Nanoscience and Nanotechnology concepts [1]. So, novel approaches are being applying for the use of this natural resource in a rational and ecological way to prepare nanostructured materials and, vice versa to apply them in turn to reduce environmental impact. In this context some of them can be utilized, for instance, in the removal of pollutants and other kind of repair and green activities. In this context, clay minerals represent a paradigmatic example because they belong to the most widely spread type of silicates that are present in soils and ore deposits, being exploited since the dawn of humanity. In this lecture it will be introduced recent contributions from our Research Group at the Materials Science Institute of Madrid (CSIC) related to diverse clay-based nanostructured materials, showing their ability for efficient elimination in a green way of pollutants, such as hexavalent chromium, radionuclides, pesticides, drugs in urban water, etc. [2,3]. Also, it will be considered examples of clay-based biohybrids provided of specific and predetermined behavior crucial to design materials of interest as sensing agents for selective ion-recognition, virus particles immobilization for improved adjuvant of vaccines or DNA non-viral transfection [4]. Finally, this lecture will also show the production of clay-carbonaceous materials containing carbon nanotubes and graphenes of great interest for the fabrication of conducting electrodes for potential uses in energy generation and storage as well as in biosensing devices. This methodology may open the way to a future large scale production of graphene-clay based materials in an ecological way [5]. The synthetic strategies here discussed concern layered smectites and vermiculites, as well as microfibrous silicates, such as sepiolite and palygorskite, which can be used as basic building units for the design and preparation of both structural and functional materials., We thank financial support from the CICYT (Spain, projects MAT2012-31759 and MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cellulose nanofibers-sepiolite biohybrid materials

  • González del Campo, M. Mar
  • Darder, Margarita
  • Aranda, Pilar
  • Huttel, Yves
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a type of nanostructured biohybrid materials resulting from the assembly of naturally occurring polymers and inorganic solids with particle size in the nanometer scale [1], as for instance diverse clay minerals with layered or fibrous morphology [2,3]. Amongst biopolymers, there is a special interest in the use of polysaccharides for the preparation of bionanocomposites due to their abundancy in nature and their renewable and biodegradable character. In the recent years, many works are focusing on the use of cellulose, the most abundant polysaccharide on Earth, to develop new hybrid materials involving clay minerals [4-7]. Cellulose chains consisting of β(1→4) linked D-glucose units are arranged in crystalline and amorphous regions forming elementary fibrils, which are in turn assembled forming the cellulose fibers present in the cell wall of plants [8]. In this context, the current work explores the development of biohybrids based on the assembly of cellulose nanofibers (CNF) to the fibrous clay sepiolite. For this purpose, Pangel® S9, sepiolite from Vallecas-Vicálvaro of rheological grade commercialized by Tolsa SA, was used together with CNF (dimensions around 0.5-2 μm in length and 4-20 nm in diameter), which was prepared following a reported procedure [9] and gently provided by Prof. P. Mutjé (LEPAMAP group, Univ. of Girona, Spain). Aqueous suspensions of CNF and sepiolite were combined by means of shear force and ultrasounds energy in order to produce homogenous and stable gels, which can be dried by solvent casting or vacuum filtration leading to self-standing films [7]. The sonication treatment seems to be compulsory in order to obtain uniform films with a considerable degree of transparency. The characterization of these materials reveals the good interaction between both types of fibers of biological and inorganic nature. The decrease in intensity of the IR vibration band at 3720 cm-1, related to the O-H stretching vibration of silanol groups in sepiolite, suggests a perturbation due to their hydrogen bonding interaction with hydroxyl groups in CNF. Accordingly, XPS results show a large perturbation in the C1s signal from CNF as a consequence of its interaction with sepiolite. Tensile modulus values of hybrid films show slightly higher values than those of the individual components, reaching a maximum value of 3.4 GPa for the material containing 20% sepiolite. The thermal stability was also improved as the sepiolite content increased, showing a shift in the thermal decomposition temperature towards higher values. The degree of hydrophobicity can be also controlled with the sepiolite content, and thus, water adsorption was reduced in hybrid films containing a small percentage of inorganic fibers in comparison to pristine CNF. The possibility of incorporating other nanoparticles allows the preparation of multifunctional materials [10]. For instance, multi-walled carbon nanotubes (MWCNTs) can be included in the CNF-sepiolite hybrids in order to provide them with electrical conductivity, allowing their application as active phase in sensor devices., MINECO (Spain), projects MAT2012-31759 & MAT2015-71117-R, and PhD fellowship BES-2013-064677 (MMGC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Clay-based formulations for metformin controlled release

  • Rebitski, Ediana P.
  • Aranda, Pilar
  • Darder, Margarita
  • Carraro, Rafaelle
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Currently, metformin hydrochloride is the reference drug used for the treatment of type 2 diabetes [1,2], which as it is well known, is a widespread chronic metabolic disease, characterized by elevated blood glucose (hyperglycemia) [3,4]. Metformin is able to decrease blood glucose concentration by mechanisms other than insulin or sulphonylureas [2,3]. It also decreases plasma insulin concentrations, contributing to increase peripheral glucose uptake and decreasing hepatic glucose production [5]. In this way, the glycemic index is improved without gaining weight by the patient. For optimal therapeutic effect, a metformin dosage of 250-500 mg 3-4 times daily, is required to reach a maximum of 2.5 g/day. The absolute bioavailability of metformin hydrochloride is 50-60% in which it has a biological half-life of 6.2 hours. However, the use of therapy with metformin results in a high incidence of gastrointestinal side effects [6], and therefore, it is of great relevance to produce formulations that allow a controlled release of the drug. In this context, clay minerals have proved to be efficient substrates to produce systems for controlled drug delivery [7]. Thus, here is evaluated the possibility of using montmorillonite to stabilize metformin, allowing its further incorporation in a formulation that may increase its biological half-life, decreasing the daily dosage and presumably, other side effects associated with the regular use of metformin. The selected clay mineral is a commercial sodium montmorillonite (MMT) known as Cloisite®-Nathat presents a cation exchange capacity ca. 93 mEq/100 g, and acceptable characteristics for uses in pharmacology [7]. As a first step, metformin has been intercalated in that clay by a cation-exchange reaction carried out in water under agitation during 24 h at room temperature. The resulting hybrid material has been characterized by diverse physicochemical techniques showing a drug content of 190 mEq/100g entrapped in the intracrystalline space of the silicate. The intercalation compound was also combined with pectin and chitosan to produce bionanocomposite materials, in which the presence of chitosan may have additional advantages related to its mucoadhesive properties in view to increase its permanence in the intestinal tract[8,9]. The prepared materials montmorillonite-metformin (MMT-MET) pectin-chitosan/metformin (PEC-CHT/MET) and pectin-chitosan/montmorillonite-metformin (PEC-CHT/MMT-MET) were in vitro tested in release experiments in which their passage through the gastro-intestinal tractis simulated by switching the pH conditions and the elapsed time in the different media. Based on obtained preliminary results, the PEC-CHT/MMTMET system considerably provides a good controlled release compared to the other two systems (MMT-MET and PEC-CHT/MET). Thus, pectin-chitosan/MMT-metformin formulation seems a promising candidate for the oral administration of metformin for the control of type 2 diabetes., MINECO (Spain, project MAT2015-71117-R) and CNPQ (Brazil, fellowship 204360/2014-5).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Next generation of advanced materials derived from clay minerals

  • Ruiz-Hitzky, Eduardo
Conference given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Since many centuries ago, humans have largely used day-to-day clay-based materials as clays represent an abundant, wide-spread, cheap, eco-friendly and versatile resource in Earth. Building materials, pottery, pencils and tablets for writing, and a huge variety of decorative products, are examples of world-wide traditional clay-based objects. Nowadays, at the High-Tec Era and at the Information Age, clays still play a significant role in current life addressed to the development of the so-called advanced materials based on these minerals. As it is well known, in the current global economy, most of the materials advancements are directly derived from a knowledge-based society. Particularly, research on clay minerals represents a paradigmatic field where Natural Sciences such as Geology, Physics, Chemistry and Biology, and Applied Sciences such as Materials Science and Engineering meet. Taking into account these features it arise the following key question: how can we create new clay-based advanced materials? To answer that question, it should be considered that as occurs with other type of low-dimensional inorganic colloidal particles, advanced materials derived from clay minerals could be developed under the Nanoscience and Nanotechnology concepts, in particular on the basis of the Nanoarchitectonics discipline [1]. In this way, novel approaches are being applying using this natural resource in a rational and ecological way to prepare nanostructured materials deserving diverse type of applications from energy production and storage to pharmaceutical and biomedicine fields. Recent contributions from our Group at the Materials Science Institute of Madrid (CSIC) related to diverse clay-based nanostructured materials will be introduced in this lecture and discussed on light of their promising future usages. For instance, smectites and sepiolite clay minerals deserve as starting building units that can be assembled to diverse metal and metal-oxide nanoparticles (NPs) for the design and preparation of highly-efficient adsorbents and catalysts, provided in some cases of superparamagnetic behavior giving rise to multifunctional materials useful for its easy recovery upon use. This type of nanoarchitectures can be applied in the elimination of pollutants such as organic dyes, radionuclides, pesticides and drugs in wastewater [2-5]. Furthermore, the assembly of carbon-nanoparticles, such as graphene and carbon nanotubes, to clay minerals can be achieved either by their direct combination under sonomechanical treatments or by the in situ generation of the carbon material from sucrose and other biomass sources. The resulting supported carbon materials exhibit good electrical conductivity and there is not necessary the removal of the silicate substrate for diverse applications, including clean energy production and storage, sensor devices as well as fillers of polymers for the development of conducting polymer-clay minerals nanocomposites [6,7]. Finally, by means of clay-organic interactions it can be prepared as well diverse biohybrids and bionanocomposites provided of specific and predetermined behaviors of interest in the removal of pollutants, controlled drug delivery, sensing agents for selective ion-recognition, immobilization and carrier of virus particles for improved adjuvant of vaccines [8], or as non-viral transfection vectors of nucleic acids [9]., MINECO (Spain, projects MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ultrasound-assisted preparation of cellulose nanocrystals-sepiolite bionanocomposites

  • Caja, Borja
  • González del Campo, M. Mar
  • Darder, Margarita
  • Aranda, Pilar
  • Vázquez Burgos, Luis
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a group of hybrid materials resulting from the combination of naturally occurring polymers and inorganic nanoparticles, which show interesting properties such as non-toxicity, biocompatibility and biodegradability [1]. Cellulose, the most abundant biopolymer on earth, is being widely applied in diverse areas (paper industry, food and pharmaceutical sectors…) and also used in the development of bionanocomposites, in some cases based on its assembly to clay minerals [2-5]. Cellulose is a linear polysaccharide consisting of β(1→4) linked D-glucose units, present as a structural component of the cell wall mainly in higher plants. These individual polysaccharide chains are arranged in crystalline and amorphous regions in elementary fibrils that assemble into cellulose fibers [6]. Several methodologies are applied for defibrillation of wood pulp in order to give the so-called microcrystalline cellulose (50-10 μm length and 10-50 μm diameter) or nanocelluloses, including microfibrillated cellulose (0.5-1 μm length and 10-100 nm diameter) as well as cellulose nanofibers (CNF, 0.5-2 μm length and 4-20 nm diameter) or nanocrystals (CNC, 50-500 nm length and 3-5 nm diameter) [6], which are suitable for preparation of bionanocomposite materials. The current work explores the development of bionanocomposites based on the assembly of two dissimilar fibrous components: sepiolite (Pangel® S9 from Vallecas-Vicálvaro, Tolsa SA) as inorganic component, and CNC obtained from commercial microcrystalline cellulose as the biological counterpart. The methodology used for the preparation of these materials involves the application of shear force and ultrasound energy to aqueous suspensions of microcrystalline cellulose in the presence of sepiolite [5]. CNC are produced during the sonication process [7], as confirmed by FE-SEM and AFM, avoiding the use of concentrated sulfuric acid commonly employed to obtain these nanomaterials. During the sonication process, the interaction of the sepiolite fibers with the produced CNC may help to reduce their re-aggregation, in a similar way than that reported for carbon nanotubes-sepiolite systems prepared under analogous conditions [8]. Thus, the resulting gels are stable and homogeneous, and can be conformed as self-standing films by solvent casting or vacuum filtration. Their characterization by FTIR confirms the good interaction between both types of organic and inorganic fibers, revealing the establishment of hydrogen bonding interactions between the hydroxyl groups in the CNC and the silanol groups in the external surface of sepiolite. The films show improved water resistance as determined from water sorption isotherms. In addition, multifunctional materials can be easily produced by incorporating other components during the preparation step, as for instance carbon nanotubes, or by grafting or adsorbing organic molecules with the desired properties. The CNC-sepiolite films can be promising materials in diverse fields such as environmental remediation, food packaging or biomedicine., MINECO (Spain), projects MAT2012-31759 & MAT2015-71117-R, and PhD fellowship BES-2013-064677 (MMGC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zein-sepiolite superparamagnetic bionanocomposite foams

  • Alcântara, Ana C. S.
  • González-Alfaro, Y.
  • Darder, Margarita
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a versatile type of materials that may offer both remarkable structural and multifunctional properties [1]. Interestingly, they can be conformed by different types of processing, giving rise for instance to films and foams of interest for a wide variety of applications, such as bioplastics, gas separation membranes, adsorbents, scaffolds for tissue engineering, packaging or building insulation. In this context, bionanocomposites foams can be prepared by diverse strategies including gas foaming, particulate leaching or freeze-drying [2], being this last one the mostly applied method as hydrophilic polysaccharides or proteins are the largest employed biopolymers and water is used as their main solvent [1,2]. The presence of inorganic solids, for instance clay minerals, as fillers in the biopolymer matrix could help the foaming process, affording nucleation sites that may control the cell density and also contributing to enhance mechanical and physical properties [2,3]. Despite this, the high hydrophilicity of most of the commonly used biopolymers limits the bionanocomposite foam stability in aqueous media, hampering their use in certain applications that involve its immersion in aqueous media, e.g., removal of pollutants in water. To overcome this drawback it is possible to stabilize the foam using cross-linking agents or less hydrophilic polymers. For instance, in the case of hydrophobic biopolymers such as zein, the main storage protein of corn, polymeric foams have been prepared using supercritical CO2 or a previously modified zein with hydrophilic compounds [4,5]. Recently, our group has reported a methodology that plays with the different solubility of zein components in presence of ethanol and water to produce zein-montmorillonite nanocomposites [6]. This communication will show how this convenient property of zein can be also applied to produce bionanocomposite foams by assembly of sepiolite to zein following a process that implies the subsequent immersion of mixtures of both components in anhydrous ethanol and water, followed by a final step of freeze-drying. Bionanocomposite foams can be also prepared using a sepiolite that incorporates magnetite nanoparticles (NP) from a ferrofluid, previously prepared by a methodology that have proved to produce very stable superparamagnetic multifunctional materials [7]. As occurs in other biohybrids involving zein assembled to sepiolite and palygorskite fibrous clays [8], the presence of this protein affords hydrophobicity and stability in water to the resulting bionanocomposite foams. Moreover, the existence of strong affinity between zein and the sepiolite-based fillers results in foams that show good mechanical properties and, in certain cases, additional superparamagnetic properties, when they incorporate the magnetite- based filler. The resulting bionanocomposite foams have been tested as adsorbents of 4-chloro-2-methylphenoxyacetic acid (MCPA), here selected as model herbicide, to prove their potential usefulness in environmental remediation. Furthermore, as the zein-sepiolite superparamagnetic bionanocomposite foams could be easily recovered from the aqueous media by applying an external magnetic field (magnet) this type of adsorbent could be easily applied in open water areas., MINECO (Spain, projects MAT2012-31759 and MAT2015-71117-R) and CSIC (Spain, JAE-Pre fellowships Program).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ZnO/sepiolite heterostructured materials for photocatalytic degradation of emerging pollutants in wastewater

  • Akkari, Marwa
  • Aranda, Pilar
  • Belver, Carolina
  • Bedia, Jorge
  • Ben Haj Amara, Abdessalem
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., The development of porous nanoarchitectures materials based on clays minerals is a topic of growing interest, being typically addressed to catalysis and adsorption applications [1,2]. Among clay minerals, sepiolite fibrous clay provides larger external surface area as well as the presence of external silanol groups in comparison to typical layered silicates (e.g., smectites), which favours the immobilization of diverse nanoparticles (NP). In this communication it will be introduced several porous ZnO-sepiolite nanostructured materials prepared using sepiolite or organosepiolite as intermediate to control the assembly and aggregation of the metal-oxide nanoparticles. On the one side, ZnO-sepiolite nanoarchitectures were prepared following a process based on the assembly of previously synthesized ZnO NP to sepiolite modified with hexadecyltrimethylammonium ions, both dispersed in 2-propanol medium, to produce an intermediate that after a thermal treatment consolidates the final ZnO/clay nanoarchitecture [3]. On the other side, the ZnO NP were incorporated to a sepiolite previously modified with SiO2 NP produced following a sol-gel methodology reported elsewhere [4]. In this case, it is intended to have a support of ZnO NP with a larger accessible surface area and also appropriate chemical reactivity of the clay surface. Finally, a novel heterostructure has been prepared using directly the sepiolite as substrate on which magnetite NP were in situ growth [5] and then ZnO NP were assembled as in the previously described materials. All types of samples have been characterized by diverse characterization techniques (XRD, FTIR, specific surface area and porosity determinations, TEM, FE-SEM-EDX, SQUID, etc.) and their activity in the photocatalytic degradation of emerging pollutants in water was tested. In this way, solutions of paracetamol, antypirine and ibuprofen drugs were exposed to a lamp that simulates solar light and the variation of their concentration with time of exposure was followed by HPLC. For instance, it has been observed that the ZnO/sepiolite heterostructure exhibits better photoactivity than ZnO/SiO2-sepiolite and ZnO/Fe3O4-sepiolite materials for the degradation of ibuprofen. However, the last material has an important advantage as it presents superparamagnetic afforded by the magnetite NP and it can be easily recovered from the reaction media by applying an external magnetic field, which makes very easy the reusability of the photocatalyst in consecutive cycles of treatment., MINECO (Spain, project MAT2015-71117-R) and CSIC (Spain, COOPA20077).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

  • Dico, Giulia Lo
  • Wicklein, Bernd
  • Lisuzzo, Lorenzo
  • Lazzara, Giuseppe
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
[EN] Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane properties that are of key significance for the development of electrochemical devices. The resulting characteristics allow for a possible application of these active elements as integrated multicomponent materials for advanced electrochemical devices such as biosensors and enzymatic biofuel cells. This strategy can be regarded as an >a la carte> menu, where the selection of the nanocomponents exhibiting different properties will determine a functional set of predetermined utility with SEP maintaining stable colloidal dispersions of different nanoparticles and polymers in water., The authors thank the MINECO (project MAT2015-71117-R) for financial support. GLD and LL acknowledge the University of Palermo for the “UOB21 Borse di studio finalizzate alla ricerca” grants. BW thanks the MINECO for an IJCI contract (IJCI-2015-23886). The authors also thank Dr. M. Darder, Dr. M. L. Ferrer, and Dr. N. López-Salas for fruitful discussions on bioelectrocatalysis.