Pasar al contenido principal

AJUSTE DE LAS PROPIEDADES OPTOELECTRONICAS DE NANOESTRUCTURAS: SU (TRANS)FORMACION Y ESTUDIOS AVANVAZADOS SOBRE SU CONFIGURACION ATOMICA Y ESTUCTURAL

MAT2016-79776-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

STEM-EELS analysis of Fe3O4@CoFe2O4@Fe3O4 core-shell-shell nanoparticles

  • Hettler, Simon
  • Sartori, Kevin
  • Pichon, B.
  • Arenal, Raúl
Resumen del trabajo presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU), European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC 2017), French Agence Nationale de la Recherche (ANR-11-LABX-0058-NIE) and SOLEIL synchrotron / Laboratoire Léon Brilluoin fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detailed atomic structure analyses of N-doped nanodiamonds

  • Arenal, Raúl
  • Hage, F.
  • Ramasse, Q.
  • Gruen, D. M.
Resumen del trabajo presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717) and Flag-ERA GATES (JTC 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Transmission electron microscopy investigation of graphene oxide flakes

  • Hettler, Simon
  • Valenzuela, David S.
  • Arenal, Raúl
Resumen del póster presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., A significant amount of research has been done on (reduced) graphene oxide ((r)GO) due to its controllable properties and because it is widely used as a starting point for graphene production and functionalization. Although the chemical model of GO is very complex, it is well established that its properties are mainly controlled by the different functional groups present, the percentage of incorporated oxygen and the ratio between sp2 and sp3-hybridized C bonds. Here we present our experimental results on transmission electron microscopy (TEM) investigation of GO acquired with an image-corrected FEI Titan3 operated at 80 kV. Using TEM imaging, electron diffraction and electron energy-loss spectroscopy (EELS), GO can be characterized in detail and properties such as composition, size, thickness or fraction of sp2-hybridized C bonds can be determined with high spatial resolution. Three EEL spectra showing the background-corrected C-K edge of different GO flakes are depicted in Figure 1. The C-K edge exhibits a sharp pre-peak at 285 eV, whose intensity corresponds to the fraction of sp2-hybridized C bonds, followed by a set of peaks associated to different oxidized functional groups and a broad peak starting at 290 eV. While the black line shows a spectra of a highly oxidized flake (17 %), the red and green curve were obtained from flakes with a low oxygen content. In summary, TEM-EELS is highly suited for an in-depth analysis of GO. The obtained information on structure, composition and alien material present in the GO allows to better understand the macroscopic properties of GO and its use in applications., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC 2017) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal analyses via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., For the last fifteen years, graphene oxide (GO) has become a material of great importance within the subject of chemically modified graphene (CDG) for its vast potential applications. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction of GO into reduced graphene oxide (RGO) are still not completely clear despite the sizable amount of studies concerning this issue. TEM and EELS, using a sample holder capable of heating samples up to 1200ºC within the TEM, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure, simultaneously and in situ, four main properties essential to this analysis at several intermediate temperatures and under high vacuum: the oxidation rate, its thickness, its mass density and its sp2-sp3 bond ratio. This study presents an analysis of GO by studying all of the aforementioned properties in two different studies: a first one heating up to 300ºC to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200ºC focused on the desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), and European Union H2020 programs Marie Sklodowska-Curie Enabling Excellence (642742), ESTEEM3 (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Transmission electron microscopy investigation of graphene oxide flakes

  • Hettler, Simon
  • Valenzuela, David S.
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., A significant amount of research has been done on (reduced) graphene oxide ((r)GO) due to its controllable properties and because it is widely used as a starting point for graphene production and functionalization [1]. Although the chemical model of GO is very complex [2], it is well established that its properties are mainly controlled by the different functional groups present, the percentage of incorporated oxygen and the ratio between sp2 and sp3-hybridized C bonds [3]. Here we present our experimental results on transmission electron microscopy (TEM) investigation of GO acquired with an image-corrected FEI Titan3 operated at 80 kV. Using TEM imaging, electron diffraction and electron energy-loss spectroscopy (EELS), GO can be characterized in detail and properties such as composition, size, thickness or fraction of sp2-hybridized C bonds can be determined with high spatial resolution. Three EEL spectra showing the background-corrected C-K edge of different GO flakes are depicted in Figure 1. The C-K edge exhibits a sharp pre-peak at 285 eV, whose intensity corresponds to the fraction of sp2-hybridized C bonds, followed by a set of peaks associated to different oxidized functional groups and a broad peak starting at 290 eV. While the black line shows a spectra of a highly oxidized flake (17 %), the red and green curve were obtained from flakes with a low oxygen content. In summary, TEM-EELS is highly suited for an in-depth analysis of GO. The obtained information on structure, composition and alien material present in the GO allows to better understand the macroscopic properties of GO and its use in applications [4]., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal behaviour via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Abstract of the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Through the last decade, graphene oxide (GO) has become a material of growing importance within the realm of Chemically modified graphene (CDG) [1] for its many potential applications[2]. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction into reduced graphene oxide (RGO) are still not completely clear despite the amount of studies concerning this issue [2]. Electron energy loss spectroscopy, coupled with a sample holder capable of heating samples up to 1200°C, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure simultaneously four main properties essential to this analysis at any given temperature and under ultra high vacuum: the oxidation rate [3], its thickness [4], its mass density [5] and its sp2-sp3 bond ratio [6]. This study presents an analysis of GO and all the aforementioned properties in two different studies: one up to 300°C to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200°C focused on the reduction of GO by desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the EU MSCA project 642742, Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs "ESTEEM3" (823717) and Graphene Flagship (785219), Peer reviewed