Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Corrosion of materials from a teaching point of view

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Ponencia presentada en: 17th International Technology, Education and Development Conference, Valencia, Spain. 6-8 March, 2023., Corrosion can be defined as the deterioration of metallic components due to electrochemical reactions with the metal and its environment. In the fight against corrosion, research and new technological developments are oriented towards minimizing the effects of this phenomenon in order to delay its 'unavoidable appearance'. Currently, the most common lines of research in this area focus on the knowledge of corrosion mechanisms and material protection systems. At the teaching level, in the Material Science area, theoretical knowledge about corrosion is well-documented but, is it correctly transmitted to the new generations of students taking into account the important economic losses caused by corrosion in the world of industry?. There are several Standards that allow to study the behavior in service of certain materials, such as those applied to carry out corrosion studies by testing in salt spray chamber. This type of test allows to know easily, a material’s tendency towards its oxidation state. However, these type of test requires a relatively high exposure time to the aggressive environment; weeks, even months. In this respect, electrochemical techniques could take an important role since in a ‘few minutes’, material behavior could be determined in a corrosive environment. However, electrochemical corrosion tests, which are complementary to more conventional methodologies, require a much more complex analysis methodology. In this regard, it is important contribute to the training of students, who are interested in the Material Science field, for the right implementation of this type of trials and mainly, for its appropriate analysis and data interpretation. Electrochemistry is an interdisciplinary field in which physical, chemical and mathematical knowledge is essential to accommodate the standardization of certain electrochemical tests that can complement the most conventional corrosion tests. Definitely, at the teaching level, it is important to make students aware of the important problem that corrosion generates at the industrial level, since corrosion damage causes large economic losses, which are equivalent to 3.4% of the global GDP [1]. Are we aware of this problem?. At this point, it is essential to strengthen theoretical knowledge of corrosion through electrochemical laboratory practice, combined with the use of commercial simulation programmes, which can contribute to a better understanding of corrosion damage to try to 'mitigate' its appearance This work presents a new teaching methodology, based on the Finite Elements analysis, in order to understand corrosion problems from university teaching., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU / PRTR (MR5W.P3 and MR4W.P2). L.B. Peral is grateful for his Margarita Salas Postdoctoral contract (Ref.: MU-21-UP2021-030) funded by the University of Oviedo through the Next Generation European Union.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Evaluating hydrogen embrittlement susceptibility of a 2205 DSS

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Rodríguez Aparicio, Rubén
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Ponencia presentada en: 5th International Conference on Structural Integrity (ICSI 2023), 28th August - 1st September, 2023. Funchal, Madeira (Portugal), Hydrogen embrittlement of a 2205 DSS has been evaluated by in-situ tensile tests at high-pressure hydrogen gas. Mechanical tests were conducted in smooth and notched samples, following the ASTM G142 standard. Hydrogen embrittlement susceptibility was studied at 70 and 140 bar. In the smooth samples, the loss of ductility was marked. However, the increase in hydrogen pressure from 70 to 140 bar seems to be practically negligible. On the other hand, in the notched samples, hydrogen damage was especially remarkable at 140 bar. Finally, hydrogen embrittlement susceptibility is also discussed based on the fracture micromechanims., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00–HyDuplex3D. This work was also supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR4W.P2 and MR5W.P3).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Ebrahimzadeh, P.
  • Fernández-Pariente, I.
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Trabajo presentado en: Third European Conference on the Structural Integrity of Additively Manufactures Materials (ESIAM23), Selective laser melting (SLM) is one of the common methods of additive manufacturing and it can be employed to customize components with complex geometry expected to work in hydrogen atmospheres. However, more studies are still needed to characterize the behavior of printed mechanical components intended to work in contact with hydrogen. In this study, smooth and notched tensile samples were precharged in an acid solution with 8 mA/cm2 for 24h time. Hydrogen damage was more marked in the notched samples, especially at 0.005 mm/min, where fracture micromechanism changed from ductile in the absence of hydrogen to quasi-brittle in the presence of internal hydrogen. The role of the strain-induced martensite is also highlighted., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00. This work was also supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR4W.P2 and MR5W.P3).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

A Comparison of AI-Enabled Techniques for the Detection of Attacks in IoT Devices

  • Cabeza-Lopez, Eduardo Manuel
  • Ruiz González, Rubén
  • Merino Gómez, Alejandro
  • Curiel Herrera, Leticia Elena
  • Rincón Arango, Jaime Andrés
Comunicación presentada en: 17th International Conference on Computational Intelligence in Security for Information Systems (CISIS 2024) and 15th International Conference on European Transnational Education (ICEUTE 2024), 9-11 October 2024, Salamanca (Spain), The purpose of this research is to enhance the security of Internet of Things devices. The deployment of these gadgets has increased exponentially, nowadays they can be found in every sector from industrial environments to applications in residential homes. This technology is important for enterprises due to the ability to manage different kind of data and control critical operations in an efficiently way. Consequently, these devices have become frequent targets of cyberattacks, highlighting the necessity of robust detection methods. However it is a complicated task to find a uniform security solution due to the variety of devices, with different capabilities and requirements. This study evaluates some artificial intelligence supervised learning algorithms such as XGBoost and Random Forest using the TON_IoT dataset, which are new generations of Internet of Things and Industrial datasets for evaluating the fidelity and the efficiency of different cybersecurity applications based on Artificial Intelligence. The analysis shows both algorithms are effective in detecting cyberattacks, achieving accuracies close to 98%, with a minimal variation in terms of precision and recall. These algorithms outperform the results obtained in previous works with the same dataset, then they can provide an additional security layer, allowing accurate identification of potential attacks. This research shows the importance of artificial intelligence algorithms in cybersecurity and their potential to improve the protection of this kind of devices., This publication is part of the AI4SECIoT project (“Artificial Intelligence for Securing IoT Devices”), funded by the National Cybersecurity Institute (INCIBE) - Spanish Ministry of Economic Affairs and Digital Transformation, and the European Union (NextGenerationEU*/PRTR).