Pasar al contenido principal

PRINCIPIOS Y APLICACIONES DE LA MECANICA DEL SUELO PARA ANCLAJE DE INSTALACIONES MARINAS DE ENERGIAS RENOVABLES

PID2020-119598RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Discrete modelling of stress relaxation in crushable sands based on fracture theory, Modélisation discrète de la relaxation des contraintes dans les sables concassés basée sur la théorie de la fracture

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Zhang, Ningning
Stress relaxation of quartz sand is simulated using a recently proposed physically based time-to-fracture discrete element method (DEM) framework. The relaxation of stress on sands under high confining pressure is modelled using stress-corrosion induced grain fracture. This feature is embedded into a pre-existing particle-splitting based rough crushable model for Fontainebleau sand. A controlled on-off computational strategy is adopted to advance the simulation. The computed oedometer stress relaxation curve compares favourably with previous experimental results. Triaxial stress relaxation results indicate that stress relaxationincreaseslinearly with time. Contact forces become more homogenous during stress relaxation; as a result, the sample becomes more stable. These microscopic behaviours agree with some observations in pile ageing, suggesting thatthe model may be adopted directly to investigate such engineering scale phenomena due to its conceptual simplicity, computational efficiency and ease of calibration., Spanish Research Agency support (AEI) through research project PID2020-119598RB-I00 is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of viscous effects during CPTu

  • Hauser, Laurin
  • Durán Caballero, Diego Enrique
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
Variable penetration rates during CPTu may impact cone readings through partial consolidation during penetration but also through viscous soil skeleton behaviour. The latter phenomenon is characteristic of dynamic penetrometers during fast penetration in fine-grained materials where tip resistance increases when the penetration rate increases. In this work, the effect of viscosity on piezocone penetration is investigated based on the numerical simulation of CPTu and triaxial tests using the application G-PFEM and a viscoplastic version of the Clay and Sand Model (CASM). The study highlights that the CPTu results are sensitive to the material parameters controlling viscosity, thus requiring careful calibration in order to obtain realistic CPTu simulations.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A time-to-facture DEM model for simulating creep in rough crushable sand

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Zhang, Ningning
A contact model able to capture creep of crushable sands within a discrete element method (DEM) framework is presented. Time dependency is established through stress-corrosion induced grain fracture. This is grafted onto a pre-existing particle-splitting model developed to simulate rough-crushable sands. The model is calibrated for Fontainebleau sand and applied to simulate soil creep at high-confining pressures. Creep simulation is advanced using the off-DEM ageing technique. The crack-velocity evolution in particle scale and laboratory oedometer creep curve were successfully captured. Moreover, the onset of creep failure during triaxial creep curve under high deviatoric stress can also be simulated using this model. The results obtained indicate significant potential of this model for micromechanically based investigation of time-dependent soil behaviour., The first author has received support from the Chinese Government Scholarship. (CSC No.202108390006) Spanish Research Agency support (AEI) through re-search project PID2020-119598RB-I00 is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simulation-aided geotechnical site investigation

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
With the advancement of computational geomechanics over the past decades, most of the activities typical of site characterization, such as in situ testing or sampling, can be realistically simulated using appropriate constitutive models and balance equations for geomaterials. These numerical simulations are not only informative of the processes that take place during testing but can be used to assess the reliability of current practice empirical interpretation techniques or even propose new interpretation techniques. In this paper, we present two numerical analyses of long-standing geotechnical problems in which new insights are gained by means of advanced numerical modelling. The first analysis corresponds to cone penetration testing in undrained, brittle geomaterials; we describe the effect of the constitutive parameters on cone metrics, and we propose a novel procedure to estimate the initial state parameter from CPTu based on a wide-ranging parametric analysis. The second analysis involves tube sampling in undrained geomaterials. A total stress analysis allows us to describe the kinematics of the soil during tube insertion and evaluate the effect of the tube geometry on the strain path of the problem. The analysis is then extended by considering a fully coupled hydromechanical formulation and a critical state constitutive model for cemented soils; by simulating conventional laboratory tests on the soil that has entered the tube we can quantify sampling disturbance in terms of geotechnical design parameters (e.g. undrained shear strength and yield stress). The possibilities offered by numerical modelling for site characterization are far from being fully exploited. It is envisaged that in the future site-specific numerical analyses will become available, enabling a more comprehensive understanding of the subsurface conditions.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of soil structure damage upon sampling

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
Sampling disturbance is a perennial problem of geotechnical site investigation. The structure of soft soils is particularly fragile and prone to disturbance during sampling. The extent by which different sampling procedures modify soil structure has been generally assessed on an empirical basis, observing the outcomes of tests performed on specimens obtained with different sampling technologies. That kind of experiment is slow, costly and laborious. In this communication we present a procedure to perform similar experiments “in silico”, by simulating the sampling procedure, examining the effect of tube sampling on the initial soil structure, obtaining sub specimens from the simulated core and testing them afterwards in simulated triaxial undrained compression and in the oedometer. The simulations are based on G-PFEM, a code developed for soil-structure interaction at large strains. The numerical experiments clarify the origin of sampling related property variability. © The Authors., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical analysis of cone penetration testing in anisotropic clayey materials

  • Durán Caballero, Diego Enrique
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
mechanical responses, for instance in the undrained shear strength observed in the laboratory. It is unclear how much of that anisotropy is reflected on the responses measured by the cone penetration test. In this work, we use GPFEM to numerically simulate cone penetration tests (CPTu) in undrained, anisotropic clays. The constitutive response is represented by S-CLAY1, a critical state, anisotropic model. Full details of the representative stress path during CPTu insertion are provided. Preliminary numerical results suggest that even a large amount of anisotropy, as described by the model, will have a very small effect on the cone responses. The numerical simulation results also show that the prevailing stress path has strong similitudes with that found during anisotropically-consolidated undrained compression triaxial test.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of viscous effects during CPTu

  • Hauser, Laurin
  • Durán Caballero, Diego Enrique
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
Variable penetration rates during CPTu may impact cone readings through partial consolidation during penetration but also through viscous soil skeleton behaviour. The latter phenomenon is characteristic of dynamic penetrometers during fast penetration in fine-grained materials where tip resistance increases when the penetration rate increases. In this work, the effect of viscosity on piezocone penetration is investigated based on the numerical simulation of CPTu and triaxial tests using the application G-PFEM and a viscoplastic version of the Clay and Sand Model (CASM). The study highlights that the CPTu results are sensitive to the material parameters controlling viscosity, thus requiring careful calibration in order to obtain realistic CPTu simulations., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical analysis of cone penetration testing in anisotropic clayey materials

  • Durán Caballero, Diego Enrique
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
mechanical responses, for instance in the undrained shear strength observed in the laboratory. It is unclear how much of that anisotropy is reflected on the responses measured by the cone penetration test. In this work, we use GPFEM to numerically simulate cone penetration tests (CPTu) in undrained, anisotropic clays. The constitutive response is represented by S-CLAY1, a critical state, anisotropic model. Full details of the representative stress path during CPTu insertion are provided. Preliminary numerical results suggest that even a large amount of anisotropy, as described by the model, will have a very small effect on the cone responses. The numerical simulation results also show that the prevailing stress path has strong similitudes with that found during anisotropically-consolidated undrained compression triaxial test., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of soil structure damage upon sampling

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
Sampling disturbance is a perennial problem of geotechnical site investigation. The structure of soft soils is particularly fragile and prone to disturbance during sampling. The extent by which different sampling procedures modify soil structure has been generally assessed on an empirical basis, observing the outcomes of tests performed on specimens obtained with different sampling technologies. That kind of experiment is slow, costly and laborious. In this communication we present a procedure to perform similar experiments “in silico”, by simulating the sampling procedure, examining the effect of tube sampling on the initial soil structure, obtaining sub specimens from the simulated core and testing them afterwards in simulated triaxial undrained compression and in the oedometer. The simulations are based on G-PFEM, a code developed for soil-structure interaction at large strains. The numerical experiments clarify the origin of sampling related property variability. © The Authors., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simulation-aided geotechnical site investigation

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
With the advancement of computational geomechanics over the past decades, most of the activities typical of site characterization, such as in situ testing or sampling, can be realistically simulated using appropriate constitutive models and balance equations for geomaterials. These numerical simulations are not only informative of the processes that take place during testing but can be used to assess the reliability of current practice empirical interpretation techniques or even propose new interpretation techniques. In this paper, we present two numerical analyses of long-standing geotechnical problems in which new insights are gained by means of advanced numerical modelling. The first analysis corresponds to cone penetration testing in undrained, brittle geomaterials; we describe the effect of the constitutive parameters on cone metrics, and we propose a novel procedure to estimate the initial state parameter from CPTu based on a wide-ranging parametric analysis. The second analysis involves tube sampling in undrained geomaterials. A total stress analysis allows us to describe the kinematics of the soil during tube insertion and evaluate the effect of the tube geometry on the strain path of the problem. The analysis is then extended by considering a fully coupled hydromechanical formulation and a critical state constitutive model for cemented soils; by simulating conventional laboratory tests on the soil that has entered the tube we can quantify sampling disturbance in terms of geotechnical design parameters (e.g. undrained shear strength and yield stress). The possibilities offered by numerical modelling for site characterization are far from being fully exploited. It is envisaged that in the future site-specific numerical analyses will become available, enabling a more comprehensive understanding of the subsurface conditions., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Discrete modelling of stress relaxation in crushable sands based on fracture theory, Modélisation discrète de la relaxation des contraintes dans les sables concassés basée sur la théorie de la fracture

  • Lei, Jiangtao
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Zhang, Ningning
Stress relaxation of quartz sand is simulated using a recently proposed physically based time-to-fracture discrete element method (DEM) framework. The relaxation of stress on sands under high confining pressure is modelled using stress-corrosion induced grain fracture. This feature is embedded into a pre-existing particle-splitting based rough crushable model for Fontainebleau sand. A controlled on-off computational strategy is adopted to advance the simulation. The computed oedometer stress relaxation curve compares favourably with previous experimental results. Triaxial stress relaxation results indicate that stress relaxationincreaseslinearly with time. Contact forces become more homogenous during stress relaxation; as a result, the sample becomes more stable. These microscopic behaviours agree with some observations in pile ageing, suggesting thatthe model may be adopted directly to investigate such engineering scale phenomena due to its conceptual simplicity, computational efficiency and ease of calibration., Spanish Research Agency support (AEI) through research project PID2020-119598RB-I00 is also acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A time-to-facture DEM model for simulating creep in rough crushable sand

  • Lei, Jiangtao
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Zhang, Ningning
A contact model able to capture creep of crushable sands within a discrete element method (DEM) framework is presented. Time dependency is established through stress-corrosion induced grain fracture. This is grafted onto a pre-existing particle-splitting model developed to simulate rough-crushable sands. The model is calibrated for Fontainebleau sand and applied to simulate soil creep at high-confining pressures. Creep simulation is advanced using the off-DEM ageing technique. The crack-velocity evolution in particle scale and laboratory oedometer creep curve were successfully captured. Moreover, the onset of creep failure during triaxial creep curve under high deviatoric stress can also be simulated using this model. The results obtained indicate significant potential of this model for micromechanically based investigation of time-dependent soil behaviour., The first author has received support from the Chinese Government Scholarship. (CSC No.202108390006) Spanish Research Agency support (AEI) through re-search project PID2020-119598RB-I00 is also acknowledged., Postprint (published version)