Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efecto del contenido de C3A en los cementos híbridos

  • Regidor, P.
  • Maltseva, O.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Póster presentado a las II Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en Madrid del 27 al 28 de mayo de 2019., Los cementos híbridos son unos cementos con muy bajo contenido de cemento portland (< 30%) y elevados contenidos de ceniza volante (<70%). Para acelerar el desarrollo de las resistencias iniciales se incorpora un activador alcalino (< 5%). El objetivo de este trabajo es determinar cómo influye el tipo de cemento empleado en la elaboración de cementos híbridos, más concretamente el contenido de C3A del cemento. Para este estudio se han empleado dos cementos comerciales: A=CEM I 52,5 R y B=CEM I 52,5 SR. Con ellos se elaboraron dos cementos híbridos: HYCA (27.5 % CEM I 52,5 R + 67.5 %5 % ceniza volante +5% activador) y HYCB (27.5 % CEM I 52,5 SR + 67.5 %5 % ceniza volante +5% activador). Inicialmente se determinaron las resistencias mecánicas en pasta, los tiempos de fraguado, y el calor liberado por calorimetría de conducción isoterma. Las pastas fueron caracterizadas por DRX y FTIR a 28 días. Finalmente se elaboraron hormigones a 2 y 28 días. Los resultados obtenidos muestran que, de los dos cementos híbridos, el que tiene un mayor contenido de C3A da lugar a cementos con tiempos de fraguado más cortos, y mayores resistencias iniciales., Ministerio de Ciencia Innovación y Universidades y fondos FEDER que subvencionan los proyectos BIA2016-76466-R y RTC2016-4872-S. Gracias también al MINECO y UE por la subvención del contrato de iniciativa al empleo Juvenil EI-GARJUV-GP17-0045 CAMGP17-IETCC_001.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New alkaline-belitic hybrid binders

  • Palomo, Ángel
  • Fernández-Jiménez, Ana
  • Sánchez-Herrero, M. J.
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., This paper summarises a long-term study organized in two consecutive steps. The first, which involved exploring a number of laboratory-synthesised belite clinkers with slightly different mineral compositions in depth, culminated in the industrial-scale manufacture of one of those materials. In the second a hybrid alkaline belite cement was prepared containing 48 % of the industrial belite clinker, 48 % fly ash and 4 % chemicals. The hybrid binder was subsequently analysed to determine its mechanical strength and hydration products. The findings showed that the hybrid alkaline belite cement designed met the compositional, mechanical and setting time requirements laid down in European standard EN 197-1 and that its hydration favoured the simultaneous precipitation of a mix of cementitious gels: C-(A)-S-H and N-(C)-A-S-H., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2016‐76466‐R and RTC2016‐4872‐S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of curing temperature in the hydration of a belite cement with high level of fly ash

  • Qu, Bo
  • Sánchez-Herrero, M. J.
  • Martín, Antonia
  • Pastor, José Y.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., This study aimed to determine the physical, mechanical, mineral and microstructural properties of a industrially manufactured hybrid cement (HYP), consisting 47,5 % Belite clinker + 47,5 % FA + 5 % solid alkaline activator. The effect of the curing temperature (25ºC, or 85 ºC) on hydration kinetics and on compressive strength development (in paste prisms and mortar prisms) was determined. Isothermal conduction calorimetry shows that curing at 85ºC, accelerates relevantly the hydration process. The 3 days compressive strength achieved by curing at 25oC was 9 MPa, but 30 MPa was the mechanical strength after 3 days if mortars were cured at 85ºC. After 28 days, the compressive strength of the specimen cured at 25oC was 33 MPa, and 43 MPa after 90 days. The specimens cured at 85oC exhibited a slightly better compressive strength. The hydration products formed were characterized using XRD, SEM/EDX and 27Al and 29Si MAS-NMR. The main reaction product formed was found to be a mixture of cementitious gels: C-(A)-S-H /C-A-S-H/(N,C )-A-S-H. The initial curing at 85°C for 20 h inhibited the formation of ettringite (or favored its rapid decomposition), at least during the first 90 days (maximum age of the materials analyzed in this work). On the contrary, curing at 85ºC favors the precipitation of the sulphates in the form of Phase U., This research was funded by the Spanish Ministry of the Economy, Industry and Competitiveness and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S, Ministry of Economy and Competitiveness of Spain (MAT2015-70780-C4-4-P), and Community of Madrid (S2013/MIT-2862-MULTIMATCHALLENGE). Author QuBo, a Ph.D. the student worked under a China Scholarship Council (CSC) grant.