Pasar al contenido principal

SENSORES DE FIBRA OPTICA PARA SEGURIDAD Y PROTECCION

TEC2013-47264-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Fiber laser sensor system based on a random mirror and a compound ring resonator for displacement measurements

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
24th International Conference on Optical Fibre Sensors (OFS 24), Curitiba, Brazil, Sept. 28-Oct. 2, 2015., In this work, we present a random laser sensor system for increasing simultaneously the sensitivity and interrogation stability of a fiber-optic displacement sensor. The system is based on a random distributed fiber laser modulated by a double-coupler ring resonator within which is placed the sensor. This allows to increase the sensitivity of the sensor and also its interrogation stability. The experimental results show a dynamic range increment (and consequently its sensitivity) of 10dB. Moreover, by using this laser-based interrogation system, the instability is reduced to 0.04 dB. In addition, wavelength filtering elements are not required, simplifying the system., Ministerio de Economía y Competitividad, European Commission
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Optical fiber sensors for asphalt structures monitoring

  • Bravo Acha, Mikel
  • Rota Rodrigo, Sergio
  • Leandro González, Daniel
  • Loayssa Lara, Alayn
  • Urricelqui Polvorinos, Javier
  • Bravo Acha, A.
  • Bravo Navas, M.
  • Mitxelena, J. R.
  • Martínez Mazo, J. J.
  • López-Amo Sáinz, Manuel
A novel optical fiber installation method was explored for asphalt monitoring. Glassfiber polymer encapsulated SMF was installed in the intermediate and surface layers in order to study the strain sensitivity with a distributed strain interrogator., Financial support from Spanish CICyT project TEC2013-47264-C2-2- and FEDER funds is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Enhanced tolerance to pulse extinction ratio in Brillouin optical time domain analysis sensors by dithering of the optical source

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate the relaxation of the stringent requirements placed on the pulse extinction ratio in long-range Brillouin optical time-domain analysis sensors (BOTDA) by modulating the wavelength of the laser source that is used to generate both pump and probe waves. This modulation makes the counter-propagating pulse pedestal and probe waves to become correlated only at certain locations in the fiber, thus reducing the gain experienced by the probe wave, which is precisely the process that limits the performance in long-range BOTDAs. Proof-of-concept experimental results in a 20-km sensing link demonstrate a 6-dB reduction of the required modulator extinction ratio., The authors acknowledge the support of the Spanish Ministerio de Economía y Competitividad project TEC2013-47264- C2-2-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Zuntz optikoan oinarritutako sentsoreen prestazioen muga-efektu berria, egituren egoera monitorizatzea helburu

  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin denbora-eremu optikoaren analisian (BOTDA) oinarritutako sentsoreak estruktura handien (120 km luzerako estrukturak) deformazioa eta tenperatura neurtzeko gaitasuna dute, metro bateko bereizmen espazialarekin. Lan honetan, sentsorearen merkatu-prezioa handitu gabe bereizmen espazial txikiagoa lortzeko beharrezkoa litzatekeen teknika erabiltzeak dituen efektu kaltegarriak aztertu egin dira. Izan ere, pultsu azkar bat sortzeko beharrezkoak diren Mach-Zehnder modulagailu elektrooptikoek iraungitze-ratio (ER) txikia dute. Horiek horrela, aztertu egin da pultsatutako seinalea sortzeko sorgailuak duen ERaren eragina BOTDA sentsoreen prestazioetan, akats handiak sortzen direla ondorioztatuz., Distributed Brillouin optical time domain analysis (BOTDA) sensors can provide high precision distributed measurements of the strain and temperature profile over extremely large structures (structures of 120 km) with a meter spatial resolution. In this work, we present the detrimental effect that would imply the use of the necessary technique to achieve a lower spatial resolution, without increasing the price of the sensor. Since the Mach-Zehnder electro-optical modulators that are required to perform a fast pulse have a low extinction ratio (ER). Therefore, we have studied the consequences of using a pulse generator device with a low ER on BOTDA sensors, concluding that it generates large errors., Lan honen egileek eskerrak eman nahi dizkiete Espainiako Zientzia eta Berrikuntza Ministerioari (TEC2013-47264-C2-2-R proiektuaren bitartez), EEGF funtsei eta Nafarroako Unibertsitate Publikoari emandako laguntza ekonomikoengatik.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Interferometric vs wavelength selective optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, a preliminary study of the behavior of two different interferometric fiber optic sensors and two different wavelength selective fiber optic sensors is performed. A photonic cristal fiber Fabry-Pérot interferometer, a Sagnac interferometer, a commercial fiber Bragg grating (FBG) and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser are analyzed. A comparison of their sensitivities and resolutions is carried out to analyze their performance as sensors for cryogenic temperatures, taking into account their advantages and drawbacks., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and the FEDER funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

High-resolution transversal load sensor using a random distributed feedback fiber laser

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, a new application of random distributed feedback lasers to fiber optic sensing has been presented. The particular properties of these lasers, such as the lack of longitudinal modes and high stability, have been exploited to monitor transversal load using a phase-shifted fiber Bragg grating (PS-FBG), obtaining a resolution of 1g and a sensitivity of 3.95GHz/Kg. Due to the PS-FBG birefringence and the load-interrelated transmission lines generated by the PS-FBG along the orthogonal polarization directions, the beating of the two emission lines generated in the laser can be monitored in the electrical domain. As a result, transversal load applied on the sensor can be measured., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within project TEC2013-47264- C2-2-R and the FEDER funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

SnO2-MOF-Fabry-Pérot humidity optical sensor system based on Fast Fourier transform technique

  • López Aldaba, Aitor
  • López Torres, Diego
  • Ascorbe Muruzabal, Joaquín
  • Rota Rodrigo, Sergio
  • Elosúa Aguado, César
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
  • Corres Sanz, Jesús María
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
In this paper, a new sensor system for relative humidity measurements based on a SnO2 sputtering deposition on a microstructured optical fiber (MOF) low-finesse Fabry-Pérot (FP) sensing head is presented and characterized. The interrogation of the sensing head is carried out by monitoring the Fast Fourier Transform phase variations of the FP interference frequency. This method is low-sensitive to signal amplitude variations and also avoids the necessity of tracking the evolution of peaks and valleys in the spectrum. The sensor is operated within a wide humidity range (20%-90% relative humidity) with a maximum sensitivity achieved of 0.14rad/%. The measurement method uses a commercial optical interrogator as the only active element, this compact solution allows real time analysis of the data., We also thank the Spanish Government projects TEC 2013-47264-C2-2-R, TEC2013-43679-R Innocampus and the INTERREG SUDOE Project SOE3/P2/P714 as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Detrimental effects in Brillouin distributed sensors caused by EDFA transient

  • Feng, Cheng
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We investigate the deleterious effect and the error in Brillouin optical time-domain analyzers induced by the combination of a low extinction ratio pulse generation with the transient behavior of erbium-doped fiber amplifiers., The authors wish to acknowledge the financial support of the German Research Foundation (DFG SCHN 716/13-1), Spanish Ministerio de Economía y Competitividad (TEC2016-76021-C2-1-R, TEC2013-47264-C2-2-R) and FEDER.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Gain dependence of measured spectra in coherent Brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We report on the effects of large pump pulse powers on Brillouin optical time-domain analysis (BOTDA) sensors based on phase-modulated probe wave and coherent detection. It is found that the large Brillouin gain that comes from the use of high power pulses induces a narrowing of the RF phase-shift spectrum that is measured in these sensors. This narrowing leads to a Brillouin frequency shift measurement error when the sensor is configured for dynamic measurements. However, the effect has been found to be less significant than that observed in dynamic slope-assisted BOTDA sensors based on amplitude., The authors wish to acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through the project TEC2013-47264-C2-2-R, FEDER funds and Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Brilloun optical time domain analysis sensor assisted by a Brillouin distributed amplifier

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate the extension of the measurement range of Brillouin optical time-domain analysis (BOTDA) sensors using a distributed Brillouin amplifier (DBA). The technique is based on injecting a DBA pump wave in the fiber to generate an additional Brillouin interaction that amplifies the BOTDA pump pulses. Furthermore, the differential pulse-width pair method is used to counteract the detrimental effects of the DBA amplification on the temporal shape of the pulses. Experimental proof-of-concept results in a 50-km fiber link demonstrate full compensation of the fiber’s attenuation with no penalty on the signal-to-noise ratio of the detected probe wave., The authors acknowledge support from the Spanish Ministerio de Economa y Competitividad project TEC2013-47264-C2-2-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Relative humidity multi-point optical sensors system based on Fast Fourier multiplexing technique

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • Arregui San Martín, Francisco Javier
  • López-Amo Sáinz, Manuel
In this paper, a new multipoint optical fiber system for relative humidity measurements based on Sn02-FP (Fabry-Pérot) sensing heads and an optical interrogator as single active device is presented and characterized. The interrogation of the sensing heads is carried out by monitoring the Fast Fourier Transform phase variations of the FP (Fabry-Pérot) interference frequencies. This method allows to multiplex several sensors with different wavelength spacing interference pattern. The sensors operate within a wide humidity range (20%-90% relative humidity) with low crosstalk between them. Five sensing heads have been measured using two different channels of the optical interrogator. The availability of four channels in the interrogator allows to multiplex a higher number of sensors, reducing proportionally the cost of each sensing point., The authors thank the Spanish Government projects TEC 2013-47264-C2-2-R, TEC2016-76021-C2-1-R, TEC2013- 43679-R Innocampus and the INTERREG SUDOE Project SOE3/P2/P714 as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Modulated fiber ring laser and its application in high-sensitivity temperature sensors

  • Pérez Herrera, Rosa Ana
  • Tainta Ausejo, Santiago
  • Erro Betrán, María José
  • López-Amo Sáinz, Manuel
This work presents an experimental demonstration of a scheme based on an internally modulated fiber ring laser for high-sensitivity temperature sensing. The attained temperature resolution has been as low as ± 2pm even when a commercial FBG with a sensitivity of 10 pm/°C was used. Thus, a fivefold improvement in the temperature sensor resolution can be achieved when compared to a simple FBG interrogation scheme. In addition to this, the measuring range could be selected only by changing the frequency modulation of the fiber ring laser. This technology also allows to triple the photodiode bandwidth unambiguously when temperature or strain measurements are carried out, which is a remarkable achievement in term of cost reduction., This work was supported by the Spanish Government projects TEC2013-47264-C2-2-R and TEC2014-58048-C2-1-P.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Random fiber lasers: application to fiber optic sensors networks

  • López-Amo Sáinz, Manuel
  • Leandro González, Daniel
  • Miguel Soto, Verónica de
  • Bravo Acha, Mikel
  • Fernández Vallejo, Montserrat
  • Pérez Herrera, Rosa Ana
Recently, random mirrors have been proposed as a method to create fiber laser cavities. This kind of cavity is based on cooperative Rayleigh scattering, which is generated along a fiber due to the material inhomogeneities presented in that fiber. In this work, basics of Random fiber lasers and different demonstrated lasing sensors systems for interrogating arrays of optical fiber sensors are shown. These systems use different kinds of amplification and cavities schemes and can interrogate optical fiber sensors located up to 225 km away., The authors would like to thank the financial support from Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, Campus Iberus and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Optical power-based interrogation of plasmonic tilted fiber Bragg grating biosensors

  • González Vila, Á.
  • López Aldaba, Aitor
  • Kinet, D.
  • Mégret, P.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
Two interrogation techniques for plasmonic tilted fiber Bragg grating sensors are reported and experimentally tested. Typical interrogation methods are usually based on tracking the wavelength shift of the most sensitive cladding mode, but for biosensing applications, spectrometer-based methods can be replaced by more efficient solutions. The proposed techniques thus rely on the measurement of the induced changes in optical power. The first one consists of a properly polarized tunable laser source set to emit at the wavelength of the sensor most sensitive mode and an optical power meter to measure the transmitted response. For the second method, a uniform fiber Bragg grating is photo-inscribed beyond the sensor in such a way that its central wavelength matches the sensor most sensitive mode, acting as an optical filter. Using a LED source, light reflected backwards by this grating is partially attenuated when passing through the sensor due to plasmon wave excitation and the power changes are quantified once again with an optical power meter. A performance analysis of the techniques is carried out and they both result competitive interrogation solutions. The work thus focuses on the development of cost-effective alternatives for monitoring this kind of biosensors in practical situations., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Brillouin distributed sensing assisted by Brillouin amplification of pump pulses

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
Trabajo presentado a IEEE Sensors 2014, celebrado en Valencia (España) del 2 al 5 de noviembre de 2014., We demonstrate, for the first time to our knowledge, the extension of the measurement range of Brillouin distributed sensors (BDS) by using a distributed Brillouin amplifier (DBA) to compensate the attenuation of the sensor's pump pulses. The technique is based on injecting an extra DBA pump wave in the fiber to generate an additional Brillouin interaction to that used for sensing. Moreover, the bandwidth of the DBA is tailored to fit that of the pump pulses by deploying a wavelength modulation of the DBA pump that is synchronized to the pump. Experimental proof of concept results demonstrate a fivefold enhancement of the measurement range of a BDS, from 10.36 km to more than 50 km in this particular case. Moreover, it is found that the use of the DBA does not introduce any significant penalty in the detection signal to noise ratio, highlighting the potential of the technique to provide much larger sensing lengths., The authors wish to acknowledge the financial support from the Universidad Pública de Navarra and Spanish Ministerio de Ciencia e Innovación through the projects TEC2010-20224- C02-01 and TEC2013-47264-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analysis sensor with amplification of pump pulses and tolerant to non-local effects

  • Mompó Roselló, Juan José
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We demonstrate a simple technique to provide conventional Brillouin optical time-domain analysis sensor with compensation for pump pulse attenuation and tolerance to non-local effects. The technique is based on operating the sensor in loss configuration so that energy is transferred from the probe wave to the pump pulse that becomes amplified as it counter-propagates with the probe wave. Furthermore, the optical frequency of the probe wave is modulated along the fiber so that the pump pulse experiences a flat gain spectrum that equally amplifies all the spectral components of the pulse, hence, preventing distortion. The method is experimentally demonstrated in a 100-km fiber link, obtaining a measurement uncertainty of 1 MHz at the worst-contrast position., The authors wish to acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through project TEC2013-47264-C2-2-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Enhancement of signal-to-noise ratio in Brillouin optical time domain analyzers by dual-probe detection

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We demonstrate a simple technique to enhance the signal-to-noise ratio (SNR) in Brillouin optical time-domain analysis sensors by the addition of gain and loss processes. The technique is based on the shift of the pump pulse optical frequency in a double-sideband probe system, so that the gain and loss processes take place at different frequencies. In this manner, the loss and the gain do not cancel each other out, and it makes possible to take advantage of both informations at the same time, obtaining an improvement of 3 dB on the SNR. Furthermore, the technique does not need an optical filtering, so that larger improvement on SNR and a simplification of the setup are obtained. The method is experimentally demonstrated in a 101 km fiber spool, obtaining a measurement uncertainty of 2.6 MHz (2σ) at the worst-contrast position for 2 m spatial resolution. This leads, to the best of our knowledge, to the highest figure-of-merit in a BOTDA without using coding or raman amplification., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Polyaniline deposition on tilted fiber Bragg grating for pH sensing

  • López Aldaba, Aitor
  • González Vila, Á.
  • Debliquy, M.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
  • Lahem, D.
In this paper, we present the results of a new pH sensor based on a polyaniline (PAni) coating on the surface of a tilted fiber Bragg grating. The pH-sensitive PAni was deposited by in situ chemical oxidative polymerization. The performance of the fabricated pH sensor was tested and the obtained pH values were compared with the results obtained using a pH meter device. It was found that the sensor exhibits response to pH changes in the range of 2-12, achieving a sensitivity of 46 pm/pH with a maximum error due to the hysteresis effect of ±1.14 pH. The main advantages of this PAni-TFBG pH sensor are biochemical compatibility, temperature independence, long-term stability and remote real-time multipoint sensing features. This type of sensor could be used for biochemical applications, pipeline corrosion monitoring or remote-multipoint measurements., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union. The authors also acknowledge the financial support of CAPTINDOOR WBGREEN programs (Walloon Region of Belgium).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simplified Brillouin sensor for structural health monitoring applications based on passive optical filtering

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mariñelarena Ollacarizqueta, Jon
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We present a simplified configuration for distributed Brillouin optical time domain analysis sensors. The technique is based on passive optical filtering of the spectral components generated in an RF-pulse-modulated optical source. The aim of this configuration is to reduce the cost of the sensor by simplifying the generation of the optical waves involved in the sensing process. Proof-of-concept experiments demonstrate distributed temperature measurement with 1 m resolution over a 20 km sensing fiber., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2013-47264-C2-2-R, FEDER funds and Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analyzer for extended sensing range using probe dithering and cyclic coding

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We present an enhanced performance Brillouin optical time-domain analysis sensor that uses dual probes waves with optical frequency modulation and cyclic coding. The frequency modulation serves to increase the probe power that can be injected in the fiber before the onset of non-local effects and noise generated by spontaneous Brillouin scattering. This leads to higher detected signal-to-noise ratio (SNR), which is further increased by the coding gain. The enhanced SNR translates to extended range for the sensor, with experiments demonstrating 1-m spatial resolution over a 164 km fiber loop with a 3-MHz Brillouin frequency shift measurement precision at the worst contrast position. In addition, we introduce a study of the power limits that can be injected in the fiber with cyclic coding before the appearance of distortions in the decoded signal., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the UPNA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous and quasi-independent strain and temperature sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and quasi-independent strain and temperature measurements is presented. The interrogation of the sensing head has been carried out by monitoring the FFT phase variations of two of the microstructured optical fiber (MOF) cavity interference frequencies. This method is independent of the signal amplitude and also avoids the need to track the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensor is operated within a range of temperature of 30°C-75°C, and 380µɛ of maximum strain were applied; being the sensitivities achieved of 127.5pm/°C and -19.1pm/µɛ respectively. Because the system uses an optical interrogator as unique active element, the system presents a cost-effective feature., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021- C2-1-R, TEC2013-47264-C2-2-R and SUDOE ECOAL-MGT and FEDER funds from the European Union is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous temperature and vibration monitoring using an all-PM fiber loop mirror interferometer

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, an all-polarization maintaining fiber loop mirror interferometer is presented and validated as vibration and temperature sensor without crosstalk between measurands. The system is entirely built using polarization-maintaining (PM) fiber and a PM optical coupler. As a consequence, no polarization controllers are needed in the cavity, significantly simplifying the operation of the system and improving the stability and accuracy of the measurements. The loop comprises three PM fiber sections appropriately fused with an angle offset between them. In this manner, the interference is maximized and the sensing contributions of the two PM fibers used as communications channels are suppressed. The third PM fiber is used as the sensor itself, simultaneously monitoring temperature and mechanical vibration up to 1.2 kHz by means of an interrogation technique based on fast Fourier transform., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Mitigation of modulation instability in Brillouin distributed fiber sensors by using orthogonal polarization pulses

  • Urricelqui Polvorinos, Javier
  • Alem, Mehdi
  • Sagüés García, Mikel
  • Thévenaz, Luc
  • Loayssa Lara, Alayn
  • Soto, Marcelo A.
A technique based on the use of orthogonally-polarized pulses is proposed to mitigate the detrimental impact of modulation instability on Brillouin distributed fiber sensors. While the theoretical underpinnings of the method are described by introducing a detailed model for the vector modulation instability, the technique is experimentally validated in a 25-km sensing link. Numerical and experimental results demonstrate that the use of orthogonally-polarized pulses not only mitigates the impact of modulation instability, but also the four-wave mixing occurring in systems using pumps with parallel polarization; thus, providing an important sensing range enhancement with a reduced pump depletion., J. Urricelqui, M. Sagues and A. Loayssa acknowledge the support from the Spanish Ministerio de Economia y Competitividad through the project TEC2013-47264-C2-2-R, FEDER funds and Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Sources of noise in Brillouin optical time-domain analyzers

  • Urricelqui Polvorinos, Javier
  • Soto, Marcelo A.
  • Thévenaz, Luc
This paper presents a thorough study of the different sources of noise affecting Brillouin optical time-domain analyzers (BOTDA), providing a deep insight into the understanding of the fundamental limitations of this kind of sensors. Analytical and experimental results indicate that the noise source ultimately fixing the sensor performance depends basically on the fiber length and the input pump-probe powers. Thus, while the phase-to-intensity noise conversion induced by stimulated Brillouin scattering can have a dominating effect at short distances, a combination of sources determines the noise in long-range sensing, basically dominated by probe double Rayleigh scattering., J. Urricelqui acknowledges the support from the Spanish Ministerio de Economia y Competitividad through the project TEC2013-47264-C2-2-R, FEDER funds, the COST action TD1001 and Universidad Pública de Navarra.