Pasar al contenido principal

DESARROLLO DE SONDAS Y VALIDACION DE RESULTADOS NUMERICOS EN EL DOMINIO DEL TIEMPO PARA EFECTOS INDIRECTOS DE DESCARGAS ATMOSFERICAS EN UAV

TEC2013-48414-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Electromagnetic characterization of 3D printed antennas employing conductive filament

  • Pous Solà, Marc|||0000-0003-2660-5254
  • Azpúrua Auyanet, Marco Aurelio|||0000-0001-8078-5116
  • Quílez Figuerola, Marcos|||0000-0003-1698-2929
  • Mateu Mateus, Marc|||0000-0002-6849-7426
  • Fernández Chimeno, Mireya|||0000-0001-8384-1320
  • Silva Martínez, Fernando|||0000-0003-3019-3993
This work presents the need to accurately define EM characterization of novel materials like the 3D conductive filament. Although these construction techniques and materials are currently used by the industry, the influence of the manufacturing process is still not properly characterized. In this paper, different monopoles are assembled modifying the 3D printing structure when a conductive filament is employed to fabricate the radiating element. Measurements of the S 11 parameter are combined with electromagnetic simulations to determine the different performances of the built antennas. The results highlight that the definition of the printing parameters has a strong influence on the conductivity of the resulting 3D printed monopoles, producing remarkable variations at the antenna performance. Modifying the results from monopoles not suitable to propagate to performances that can produce proper electromagnetic fields., This work was supported by the Spanish “Ministerio de Economía, Industria y Competitividad” under project TEC2016-79214-C3-2-R (AEI/FEDER, UE), Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Electromagnetic characterization of 3D printed antennas employing conductive filament

  • Pous Solà, Marc
  • Azpúrua Auyanet, Marco Aurelio
  • Quílez Figuerola, Marcos
  • Mateu Mateus, Marc
  • Fernández Chimeno, Mireya
  • Silva Martínez, Fernando
This work presents the need to accurately define EM characterization of novel materials like the 3D conductive filament. Although these construction techniques and materials are currently used by the industry, the influence of the manufacturing process is still not properly characterized. In this paper, different monopoles are assembled modifying the 3D printing structure when a conductive filament is employed to fabricate the radiating element. Measurements of the S 11 parameter are combined with electromagnetic simulations to determine the different performances of the built antennas. The results highlight that the definition of the printing parameters has a strong influence on the conductivity of the resulting 3D printed monopoles, producing remarkable variations at the antenna performance. Modifying the results from monopoles not suitable to propagate to performances that can produce proper electromagnetic fields., This work was supported by the Spanish “Ministerio de Economía, Industria y Competitividad” under project TEC2016-79214-C3-2-R (AEI/FEDER, UE), Peer Reviewed, Postprint (author's final draft)