Pasar al contenido principal

APROVISIONAMIENTO DINAMICO DE CONECTIVIDAD EN ESCENARIOS INALAMBRICOS 5G DE ALTA DENSIDAD

TEC2015-71329-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Guaranteed bit rate slicing in WiFi networks

  • Richart Gutiérrez, Matías Mario|||0000-0002-9152-3522
  • Baliosian De Lazzari, Javier Ernesto
  • Serrat Fernández, Juan|||0000-0002-4551-9880
  • Gorricho Moreno, Juan Luis|||0000-0002-6280-1546
  • Agüero Calvo, Ramón
In forthcoming 5G networks, slicing has been proposed as a means to partition a shared physical network infrastructure into different self-contained logical parts (slices), which are set up to satisfy certain requirements. Although the topic has been thoroughly investigated by the scientific community and the industry, there are not many works addressing the challenges that appear when trying to exploit slicing techniques over WiFi networks. In this paper, we propose a novel method of allocating resources for WiFi networks to satisfy minimum bit rate requirements. We formulate an optimization problem, and we propose a solution based on the theory of Lyapunov drift optimization. The validity of the proposed solution is assessed by means of a simulation-based evaluation in Matlab., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A reinforcement learning approach for placement of stateful Virtualized Network Functions

  • Kibalya, Godfrey Mirondo|||0000-0002-7053-3756
  • Serrat Fernández, Juan|||0000-0002-4551-9880
  • Gorricho Moreno, Juan Luis|||0000-0002-6280-1546
  • Gift Bujjingo, Doreen
  • Sseregunda, Jonathan
  • Zhang, Peiying
Network softwarization increases network flexibility by supporting the implementation of network functions such as firewalls as software modules. However, this creates new concerns on service reliability due to failures at both software and hardware level. The survivability of critical applications is commonly assured by deploying stand-by Virtual Network Functions (VNFs) to which the service is migrated upon failure of the primary VNFs. However, it is challenging to identify the optimal Data Centers (DCs) for hosting the active and stand-by VNF instances, not only to minimize their placement cost, but also the cost of a continuous state transfer between active and stand-by instances, since a number of VNFs are stateful. This paper proposes a reinforcement learning (RL) approach for the placement of stateful VNFs that considers a joint reservation of primary and backup resources with the objective of minimizing the overall placement cost. Simulation results show that the proposed algorithm is optimized in terms of both acceptance ratio and cost, resulting in up to 27% and 30% improvements in terms of accepted requests and placement cost compared to a state-of-the art algorithm.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resource allocation and management techniques for network slicing in WiFi networks

  • Richart Gutiérrez, Matías Mario|||0000-0002-9152-3522
  • Baliosian, Javier
  • Serrat Fernández, Juan|||0000-0002-4551-9880
  • Gorricho Moreno, Juan Luis|||0000-0002-6280-1546
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Network slicing has recently been proposed as one of the main enablers for 5G networks; it is bound to cope with the increasing and heterogeneous performance requirements of these systems. To "slice" a network is to partition a shared physical network into several self-contained logical pieces (slices) that can be tailored to offer different functional or performance requirements. Moreover, a defining characteristic of the slicing paradigm is to provide resource isolation as well as efficient use of resources. In this context, the thesis described in this paper contributes to the problem of slicing WiFi networks by proposing a solution to the problem of enforcing and controlling slices in WiFi Access Points. The focus of the research is on a variant of network slicing called QoS Slicing, in which slices have specific performance requirements. In this document, we describe the two main contributions of our research, a resource allocation mechanism to assign resources to slices, and a solution to enforce and control slices with performance requirements in WiFi Access Points., This work has been supported by the European Commission and the Spanish Government (Fondo Europeo de Desarrollo Regional, FEDER) by means of the EU H2020 NECOS (777067) and ADVICE (TEC2015-71329) projects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resource allocation for network slicing in WiFi access points

  • Richart Gutiérrez, Matías Mario|||0000-0002-9152-3522
  • Baliosian, Javier
  • Serrat Fernández, Juan|||0000-0002-4551-9880
  • Gorricho Moreno, Juan Luis|||0000-0002-6280-1546
  • Agüero Calvo, Ramón
  • Agoulmine, Nazim
Network slicing has recently appeared as one of the most important features that will be provided by 5G networks and is attracting considerable interest from industry and academia. At the wireless edge of these networks, most of the contributions in this area are related to cellular technologies leaving behind WiFi networks. In this work, we present a resource allocation mechanism based on airtime assignment to achieve infrastructure sharing and slicing in WiFi Access Points. The approach is simple and has the potential to be straightforwardly used within scenarios of wireless access infrastructure sharing., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resource allocation and management techniques for network slicing in WiFi networks

  • Richart Gutiérrez, Matías Mario
  • Baliosian, Javier
  • Serrat Fernández, Juan
  • Gorricho Moreno, Juan Luis
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Network slicing has recently been proposed as one of the main enablers for 5G networks; it is bound to cope with the increasing and heterogeneous performance requirements of these systems. To "slice" a network is to partition a shared physical network into several self-contained logical pieces (slices) that can be tailored to offer different functional or performance requirements. Moreover, a defining characteristic of the slicing paradigm is to provide resource isolation as well as efficient use of resources. In this context, the thesis described in this paper contributes to the problem of slicing WiFi networks by proposing a solution to the problem of enforcing and controlling slices in WiFi Access Points. The focus of the research is on a variant of network slicing called QoS Slicing, in which slices have specific performance requirements. In this document, we describe the two main contributions of our research, a resource allocation mechanism to assign resources to slices, and a solution to enforce and control slices with performance requirements in WiFi Access Points., This work has been supported by the European Commission and the Spanish Government (Fondo Europeo de Desarrollo Regional, FEDER) by means of the EU H2020 NECOS (777067) and ADVICE (TEC2015-71329) projects., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resource allocation for network slicing in WiFi access points

  • Richart Gutiérrez, Matías Mario
  • Baliosian, Javier
  • Serrat Fernández, Juan
  • Gorricho Moreno, Juan Luis
  • Agüero Calvo, Ramón
  • Agoulmine, Nazim
Network slicing has recently appeared as one of the most important features that will be provided by 5G networks and is attracting considerable interest from industry and academia. At the wireless edge of these networks, most of the contributions in this area are related to cellular technologies leaving behind WiFi networks. In this work, we present a resource allocation mechanism based on airtime assignment to achieve infrastructure sharing and slicing in WiFi Access Points. The approach is simple and has the potential to be straightforwardly used within scenarios of wireless access infrastructure sharing., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A reinforcement learning approach for placement of stateful Virtualized Network Functions

  • Kibalya, Godfrey Mirondo
  • Serrat Fernández, Juan
  • Gorricho Moreno, Juan Luis
  • Gift Bujjingo, Doreen
  • Sseregunda, Jonathan
  • Zhang, Peiying
Network softwarization increases network flexibility by supporting the implementation of network functions such as firewalls as software modules. However, this creates new concerns on service reliability due to failures at both software and hardware level. The survivability of critical applications is commonly assured by deploying stand-by Virtual Network Functions (VNFs) to which the service is migrated upon failure of the primary VNFs. However, it is challenging to identify the optimal Data Centers (DCs) for hosting the active and stand-by VNF instances, not only to minimize their placement cost, but also the cost of a continuous state transfer between active and stand-by instances, since a number of VNFs are stateful. This paper proposes a reinforcement learning (RL) approach for the placement of stateful VNFs that considers a joint reservation of primary and backup resources with the objective of minimizing the overall placement cost. Simulation results show that the proposed algorithm is optimized in terms of both acceptance ratio and cost, resulting in up to 27% and 30% improvements in terms of accepted requests and placement cost compared to a state-of-the art algorithm., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Guaranteed bit rate slicing in WiFi networks

  • Richart Gutiérrez, Matías Mario
  • Baliosian De Lazzari, Javier Ernesto
  • Serrat Fernández, Juan
  • Gorricho Moreno, Juan Luis
  • Agüero Calvo, Ramón
In forthcoming 5G networks, slicing has been proposed as a means to partition a shared physical network infrastructure into different self-contained logical parts (slices), which are set up to satisfy certain requirements. Although the topic has been thoroughly investigated by the scientific community and the industry, there are not many works addressing the challenges that appear when trying to exploit slicing techniques over WiFi networks. In this paper, we propose a novel method of allocating resources for WiFi networks to satisfy minimum bit rate requirements. We formulate an optimization problem, and we propose a solution based on the theory of Lyapunov drift optimization. The validity of the proposed solution is assessed by means of a simulation-based evaluation in Matlab., Peer Reviewed, Postprint (published version)