Pasar al contenido principal

TECNICAS PARA LA MEJORA DE LAS PRESTACIONES, COSTE Y CONSUMO DE ENERGIA DE LOS SERVIDORES

TIN2015-66972-C5-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Accurately Modeling a Photonic NoC in a Detailed CMP Simulation Framework

  • Puche Lara, José
  • Lechago Buendía, Sergio
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
Photonic interconnects are a promising solution for the so-called communication bottleneck in current Chip Multiprocessor (CMPs) architectures. This technology presents an inherent low-latency and power consumption almost independent of communication distance, which are really desirable features in future Networks on Chip for next CMPs generations. However, since nanophotonic technology is still growing and therefore in an immature state, current simulators of detailed systems may not provide accurate models of photonic components. In this context, non-representative results are obtained when unaccurate photonic models are assumed. This paper summarizes all of the components that conform a fully operative photonic NoC and presents their current state of the art. Moreover, we evaluate a realistic photonic network that consists of two photonic rings and a token-based arbitration mechanism and compare it against a non-realistic model. In addition, both realistic and non-realistic schemes are valuated under different configurations varying the number of wavelengths that photonic waveguides employ. The experimental results show that the non-realistic NoC presents up 6× network latency deviation with respect to the accurate model. This deviation is translated into a performance deviation higher than 10% in several applications studied, which demonstrates the importance of accurate models when simulating current technologies under development like nanophotonics. Finally, a power consumption model of the realistic photonic network is presented. The results show that the overall photonic network power consumption grows with the number of wavelengths per waveguide since the number of required modulators and receivers becomes higher. In this way, the proposed realistic photonic network, which employs only two wavelengths for arbitration and destination selection tasks, increases its power consumption up to 3%, so network designs with more complex arbitration mechanisms must take into account the impact of the number of wavelengths on the power consumption., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) and by Plan E funds under Grant TIN2015-66972-C5-1-R and the ExaNest project, funded by the European Union’s Horizon 2020 research andinnovation programme under grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Workload Characterization for Exascale Computing Networks

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[EN] Exascale computing is the next step in high performance computing provided by systems composed of millions of interconnected processing cores. In order to guide the design and implementation of such systems, multiple workload characterization studies and system performance evaluations are required. This paper provides a workload characterization study in the context of the European Project ExaNeSt, which focuses, among others, on developing the network technology required to implement future exascale systems. In this work, we characterize different ExaNeSt applications from the computer network perspective by analyzing the distribution of messages, the dynamic bandwidth consumption, and the spatial communication patterns among cores. The analysis highlights three main observations; i) message sizes are, in general, below 50 kB; ii) communication patterns are usually bursty; and iii) spatial communication among cores concentrate in hot spots for most applications. Taking into account these observations, one can conclude that in order to unclog congested network links, an exascale network must be designed to briefly support higher-than-average bandwidths in the vicinity of key network cores., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improving System Turnaround Time with Intel CAT by Identifying LLC Critical Applications

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Selfa, Vicent
[EN] Resource sharing is a major concern in current multicore processors. Among the shared system resources, the Last Level Cache (LLC) is one of the most critical, since destructive interference between applications accessing it implies more off-chip accesses to main memory, which incur long latencies that can severely impact the overall system performance. To help alleviate this issue, current processors implement huge LLCs, but even so, inter-application interference can harm the performance of a subset of the running applications when executing multiprogram workloads. For this reason, recent Intel processors feature Cache Allocation Technologies (CAT) to partition the cache and assign subsets of cache ways to groups of applications. This paper proposes the Critical-Aware (CA) LLC partitioning approach, which leverages CAT and improves the performance of multiprogram workloads, by identifying and protecting the applications whose performance is more damaged by LLC sharing. Experimental results show that CA improves turnaround time on average by 15%, and up to 40% compared to a baseline system without partitioning., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO) and Plan E funds, under grants TIN2015-66972-C5-1-R and TIN2017-92139-EXP. It was also supported by the ExaNest project, with funds from the European Union Horizon 2020 project, with grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de Cargas para Redes de Computación Exascale

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[ES] La computación exascale es el siguiente paso en la computación de alto rendimiento proporcionada por sistemas compuestos por millones de núcleos de procesamiento interconectados. Para guiar el diseño e implementación de dichos sistemas, se requieren múltiples estudios de caracterización de carga de trabajo y evaluaciones del sistema. Este documento proporciona un estudio de caracterización de la carga de trabajo en el contexto del proyecto europeo ExaNeSt, que se centra, entre otros, en el desarrollo de la tecnologı́a de red necesaria para implementar futuros sistemas de exascale. En este trabajo, caracterizamos diferentes aplicaciones ExaNeSt desde la perspectiva de la red informática mediante el análisis de la distribución de mensajes por tamaño, el consumo de ancho de banda a lo largo de la ejecución y los patrones espaciales de comunicación entre los núcleos. El análisis destaca tres observaciones principales; i) los tamaños de los mensajes son, en general, inferiores a 50 kB; ii) los patrones de comunicación suelen ser de ráfaga; y iii) la comunicación espacial entre los núcleos se concentra en los puntos crı́ticos para la mayorı́a de las aplicaciones. Tomando en cuenta estas observaciones, uno puede concluir que para desbloquear enlaces de red congestionados, una red exascale debe diseñarse para soportar brevemente anchos de banda superiores a la media en las proximidaes de los núcleos claves de la red., Este trabajo fue apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención No. 671553, y por el Ministerio de Economía y Competitividad (MINECO) y fondos del Plan E bajo Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado de una Red Fotónica para Computación Exascale

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
La mayoría de las investigaciones actuales se realizan en simuladores desarrollados para redes eléctricas, cuyos componentes difieren mucho de los componentes fotónicos. Además, la tecnología fotónica añade nuevos componentes que no están presentes en las redes eléctricas. Este artículo discute cómo se puede construir una herramienta de simulación de redes fotónicas a partir de un simulador de redes eléctricas. Se resume y compara el comportamiento de ambas tecnologías –eléctrica y fotónica– y se discuten las extensiones propuestas. Entre otros aspectos, las extensiones propuestas modelan routers ópticos, wavelength-division multiplexing, conmutación de circuitos y algoritmos de encaminamiento., Este trabajo ha sido apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención no 671553, y los fondos del Ministerio de Economía y Competitividad (MINECO) y el Plan E bajo la subvención TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modeling a Photonic Network for Exascale Computing

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
Photonics technology has become a promising and viable alternative for both on-chip and off-chip computer networks of future Exascale systems. Nevertheless, this technology is not mature enough yet in this context, so research efforts focusing on photonic networks are still required to achieve realistic suitable network implementations. In this context, system-level photonic network simulators can help to guide designers to assess the multiple design choices. Most current research is done on electrical network simulators, whose components work widely different from photonics components. Moreover, photonics technology adds new components that are not present in electrical networks. This paper discusses how a photonics simulation tool can be built by extending an electrical simulation framework. We summarize and compare the working behavior of both technologies -electrical and photonics, and discuss the rationale behind the proposed extensions. Among others, the devised extensions model optical routers, wavelength-division multiplexing, circuit switching, and specific routing algorithms. This work is aimed to provide support to investigate off- chip optical networks in the context of the European Exascale System Interconnect and Storage project (ExaNeSt) project. The experiments presented in this paper study multiple realistic photonic networks configurations and have been performed with excerpts of real traces. Experimental results show that, compared to electrical networks, optical networks can reduce the execution time of the workload by several orders of magnitude. Our study reveals that future optical technologies presenting a 3.2 Tbps aggregate link bandwidth will not provide additional performance benefits over state-of-the-art 1.6 Tbps optical links across the studied workloads, but 1.6 Tbps network links are enough to achieve the highest optical performance on computer networks. Regarding the link configuration, the bandwidth per optical channel is the parameter with highest impact on the network delay and so on the execution time, while for a given optical bandwidth per channel the better strategy is to reduce the phit size., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Economía y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.