Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D5.2: Digital-Twin Enabled multi-physics simulation and model matching

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
This deliverable presents a report on the developed actions and results concerning Digital-Twin-enabled multi-physics simulations and model matching. Enabling meaningful simulations within new human-infrastructure interfaces such as Digital twins is paramount. Accessing the power of simulation opens manifold new ways for observation, understanding, analysis and prediction of numerous scenarios to which the asset may be faced. As a result, managers can access countless ways of acquiring synthetic data for eventually taking better, more informed decisions. The tool MatchFEM is conceived as a fundamental part of this endeavour. From a broad perspective, the tool is aimed at contextualizing information between multi-physics simulations and vaster information constructs such as digital twins. 3D geometries, measurements, simulations, and asset management coexist in such information constructs. This report provides guidance for the generation of comprehensive adequate initial conditions of the assets to be used during their life span using a DT basis. From a more specific focus, this deliverable presents a set of exemplary recommendations for the development of DT-enabled load tests of assets in the form of a white paper. The deliverable also belongs to a vaster suit of documents encountered in WP5 of the Ashvin project in which measurements, models and assessments are described thoroughly., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D6.2 Recommendations and options for future standardization for Digital Building Twins at a European scale

  • Wagmeister, Stefan
  • Grün, Karl
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Stipanovic, Irina
  • Jungmann, Manuel
Contribution to Standardization is a key component of almost any H2020-funded project's success because standards and standardization enhance the market uptake of solutions developed by the projects. The following document provides a comprehensive set of ASHVIN's recommendations and options for standardization for digital building twins at a European Scale. In addition, the document outlines the methodology how these recommendations and options were elaborated and provides an outlook for their implementation, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

ASHVIN Use Case: Digital twining of concrete consolidation quality process

  • Posada Cárcamo, Héctor José
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Kennedy, Mary Lidiya
  • Senturk, Eser
A specific model is developed by Digital Twin Technologies (DTT) and the Polytechnic University of Catalunya (UPC) for real-time monitoring of vibration quality to proactively address concrete consolidation issues.
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D4.1 A set of KPIs to plan and monitor productive, resource efficient, and safe constructon sites

  • Lukaszewska, Agnieszka
  • Gilun, Marek
  • Bak, Mateusz
  • Johansson, Felicia
  • Jongeling, Rogier
  • Tomar, Rahul
  • Claeson-Jonsson, Christina
  • Jungmann, Manuel
  • Campos, Jorge
  • Gonçalves, João
  • Papanikolaou, Vasilis
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ungureanu, Lucian
Deliverable D4.1 of project ASHVIN (Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin Project Acronym), This document describes performance indicators that contribute to productivity, resource efficient, and safe construction works. Report also summaries the tools that will be developed within ASHVIN project and support tracking of progress of construction works. The most important tools and methodologies are: ASHVIN platform dashboards that provide a rich environment to consider and manage the performance indicators; Construction monitoring tool with productivity and safety KPI decision making dashboard (4DV-C); Privacy ensuring safety management, simulation, and training tool (SMT); A configuration management tool to track as-designed and as-built, as well as, to allow for seamless commissioning (CMT); Simulation-based real-time construction site and logistics planning tool (DES); Multi-physics model matching tool for status assessment of bridges and buildings (MATCHFEM); Lean project planning methodology. According to the interviews performed with managers of construction sites the number of times the site is getting organized and cleaned influences not only the safety of a site but also the productivity. In addition, the number of tasks that must be redone/corrected influences the morale of the workers and therefore the productivity of the work as well as the costs and the resources that are being used to finish up that task. ASHVIN project will support the calculation of following Performance Indicators: Percentage Plan Complete, Non-productive working time of professional, component properties, productivity rate, waste factor, number of concurrent trades on site, percentage of available space used, utilisation rate of equipment, number (and severity) of reported issues related to the accidents on construction site, safety factor, strength of structural components, cost of equipment and workers. Those indicators will be measured and checked on three ASHVIN demonstration projects: #4 Logistic hall construction in Germany, #5 Kineum office building in Sweden, #6 Office buildings in Spain., Task leader/Main author: Agnieszka Łukaszewska, Marek Giluń, Mateusz Bąk (FASADA) Contributing partners: Felicia Johansson, Rogier Jongeling (Plan B), Rahul Tomar (DTT), Christina Claeson-Jonsson (NCC); Manuel Jungmann (TUB), Jorge Campos, João Gonçalves (EUR), Vasilis Papanikolaou (AUS) Reviewer(s):Rolando Chacon (UPC), Lucian Ungureanu (TUB)
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D7.1 ASHVIN technology demonstration plan

  • Lukaszewska, Agnieszka
  • Gilun, Marek
  • Johansson, Felicia
  • Jongeling, Rogier
  • Tomar, Rahul
  • Claeson-Jonsson, Christina
  • Jungmann, Manuel
  • Campos, Jorge
  • Gonçalves, João
  • Papanikolaou, Vasilis
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Garcia Carrera, David|||0000-0002-5907-2469
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
  • Ungureanu, Lucian
  • Skaric, Sandra
  • Stipanovic, Irina
Deliverable D7.1 of project ASHVIN (Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin Project Acronym), ASHVIN aims at the digitalization of the construction industry to increase productivity, resource efficiency, and safety. Towards this goal, digital twin technology is only one means to an end. Therefore, the core of all ASHVIN development aims at introducing two major process innovations enabled by the possibility to closely match as-build information with as-designed information throughout the product development lifecycle that is made possible by digital twin technology. This report presents a plan for implementation of the ASHVIN platform and tools in the demonstration projects. For each of the demonstration project relevant challenges and needs are described, based on that appropriate tools and monitoring devices can be planned. It is significant to show that various type of structures (buildings, bridges, and industrial buildings) has different problems and boundary condition. Only after examination and understanding of the problems and challenges that each construction site faces it is possible to correctly apply new solution. The document that presents the implementation of digital twin technologies on demonstration projects: #1 Bridges for highspeed railways in Spain, #2 Building renovation in Poland, #3 Airport runway in Croatia, #4 Logistics hall construction in Germany, #5 Kineum office building in Sweden, #6 Office buildings in Spain, #7 Bridges in highway network in Spain, #8 Footbridge in Germany, #9 Sport stadium roof structure, #10 Quay wall in the Netherlands., Task leader/Main author: Agnieszka Łukaszewska, Marek Giluń (FASADA) Contributing partners: Felicia Johansson, Rogier Jongeling (Plan B), Rahul Tomar (DTT), Christina Claeson-Jonsson (NCC); Manuel Jungmann (TUB), Jorge Campos, João Gonçalves (EUR), Vasilis Papanikolaou (AUS); Rolando Chacon (UPC), David García Carrera (UPC), Carlos Ramonell (UPC), Hector Posada (UPC), Lucian Ungureanu (TUB), Sandra Skaric Palic (INFCON) Reviewer(s): Irina Stipanovic (INFCON), Burkhard Krenn,(SPB)
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D4.3: Digital Twin supported lean project planning, control and risk management

  • Johansson, Felicia
  • Göransson, Ellen
  • Nathorst-Westfelt, Philip
  • Jongeling, Rogier
  • Claeson-Jonsson, Christina
  • Tomar, Rahul
  • Gonçalves, João
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Jungmann, Manuel
  • Renter, Jorg
There is a considerable opportunity to improve the planning and control of construction work. The construction industry is still struggling to adopt to the digital revolution’s concepts due to complexity, uncertainty, the fragmented supply chain, the short-term thinking, and the culture of ad hoc solutions. The main purpose of this document is to describe the business and decision-making processes to support lean project planning, control, and risk management with digital twin data., There is a considerable opportunity to improve the planning and control of construction work. The construction industry is still struggling to adopt to the digital revolution’s concepts due to complexity, uncertainty, the fragmented supply chain, the short-term thinking, and the culture of ad hoc solutions. The main purpose of this document is to describe the business and decision-making processes to support lean project planning, control, and risk management with digital twin data. Additionally, this document also presents and describes a process model that has been developed for the construction phase. In this task, three demo-sites have been investigated. All three projects were building construction projects hence no infrastructure projects have been researched. To describe the designed process model, IDEF0-notation was used. A vital part of using digital twins to support process management and agile planning is the capture of data from the site. The produced process model contains five different process groups: initiating, planning, implementing, controlling, and closing and is generally based on the demonstration sites within the ASHVIN project and applicable to constructions sites worldwide. From each demonstration site information was gathered considering how data-collection had been conducted on each site using various digital tools and how they corresponded to the different KPI’s within the project. The methods were then analysed and evaluated how they could be implemented in a work breakdown structure (WBS) and location breakdown structure (LBS). These methods in combination with the process model allows the team to detect issues, react and adjust the schedule to make the whole process smoother. It can assist them in planning when to take in certain disciplines and when to order materials. During this task the demonstration projects were already in the construction phase, which meant that it was mainly controlling activities that could be conducted according to the process model. It would be interesting to be able to test the process model from the beginning of a construction project, in other words from the initiating phase. Multiple findings have been made throughout this study. The main takeaway from is how vital it is for a project to decide in an early stage the prerequisites that will be needed to control and affect the project during the construction phase. This is the reason why it is essential to make sure that the process model as well as the digital tools are applied in depth. The second point to be made is to understand that all the KPI’s mentioned in the results section can be collected using a multitude of different tools and methods. This report has met its main purpose of describing the business and decision-making processes to support lean project planning, control, and risk management with digital twin data., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

ASHVIN Use Case: Digital twin enabled multi physics simulation and model matching

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Posada Cárcamo, Héctor José
  • Senturk, Eser
  • Kennedy, Mary Lidiya
Contextualizing information between multi-physics simulations and vaster information constructs such as digital twins. 3D geometries, measurements, simulations, and asset management coexist in such information constructs., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D5.1 SHM digital twin requirements for residential, industrial buildings and bridges

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Stipanovic, Irina
  • Škaric Palic, Sandra
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
This deliverable presents a report of the needs for structural control on buildings (initial imperfections, deflections at service, stability, rheology) and on bridges (vibrations, modal shapes, deflections, stresses) based on state-of-the-art image-based and sensor-based techniques. To this end, the deliverable identifies and describes strategies that encompass state-of-the-art instrumentation and control for infrastructures (SHM technologies)., Objectius de Desenvolupament Sostenible::8 - Treball Decent i Creixement Econòmic, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

D1.1 Launch Version of ASHVIN Platform (Version v0.2)

  • Teodorovic, Mirko
  • Hartmann, Timo
  • Tomar, Rahul
  • Koulalis, Ilias
  • Priedmore, Jason
  • Gavin, Ken
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
MFL deployed, in the cloud managed by Digital Ocean, an open-source, secure and scalable IoT platform that ensures device provisioning, connectivity and management, data accumulation and consumption. The platform is based on the microservices combined with Kubernetes orchestration mechanisms. The platform is available at https://iot.ashvin.eu. A set of user and technical manuals is provided in the appendix of this report. Deliverable 1.1. represents the launch version of the Ashvin platform that will be further improved throughout the project and a final version will be described in D1.6 Full Version of the Ashvin Digital Twin Platform., MFL deployed, in the cloud managed by Digital Ocean, an open-source, secure and scalable IoT platform that ensures device provisioning, connectivity and management, data accumulation and consumption. The platform is based on the microservices combined with Kubernetes orchestration mechanisms. The platform is available at https://iot.ashvin.eu. A set of user and technical manuals is provided in the appendix of this report. Deliverable 1.1. represents the launch version of the Ashvin platform that will be further improved throughout the project and a final version will be described in D1.6 Full Version of the Ashvin Digital Twin Platform., ASHVIN has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No 958161. This document reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.