Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D7.1 - OPTIMAI - Training Material

  • Henriksson, Linda
  • Arigho, Gillian
  • McGlynn, Rory
  • Hand, Alison
  • Walker, Stephen
  • Gurzawska, Agata
  • Hayes, Paul
  • Guillén, Andrea|||0000-0002-5093-1474
  • Teodoro, Emma|||0000-0001-9086-3616
  • Böttinger, Andreas
  • Senatore, Valentina
  • Zanesco, Antonio
  • Ubis, Fernando
  • Moradkhani, Shayan
  • Ntoa, Stavroula
  • Gómez, Andrea
  • Charalampous, Paschalis
  • Tsita, Christina
  • Dimitriou, Nikos
D7.3 Ethics Recommendations and Regulatory Framework provides the OPTIMAI Consortium with an informational resource to support pilot activities that respect the moral and legal rights of human research participants in the industrial/industry 4.0 employment context. This deliverable builds upon previous deliverables dealing with ethics and legal issues including D9.1 Report on the OPTIMAI Ethical and Legal Framework, and D9.2 Report on the OPTIMAI Ethical, Legal, and Societal Risks - 1st Version. This deliverable builds upon and refines both ethics and legal requirements presented in those deliverables, utilising ethics and legal partners UAB and TRI's most up-to-date understanding of the tools to be deployed and the environments in which they will be deployed. Additional guidance on ethical procedures to be observed and executed in managing ethical human research participation is also provided, bearing in mind the relevant circumstances of the pilot sites. In building upon and refining the work undertaken in previous deliverables, UAB and TRI have notably taken a country-specific approach to examining end-user and technical partners' legal obligations. A general section dealing with GDPR requirements notwithstanding, this deliverable provides a country-by-country breakdown of highlights of relevant national law in the United Kingdom, Spain, and Greece, where OPTIMAI pilot activities will take place. The particular areas of law detailed include data protection law, employment law, equality law, and health and safety law. A non-exhaustive list of legal requirements are presented to aid all partners, but particularly end-user partners, in making decisions in the design and implementation of OPTIMAI solution research activities in the industrial context that respect the rights of human research participants and comply with the laws of the countries where these activities will take place. Furthermore, the insights of the deliverable can be beneficial in similar contexts after the end of the project raising end-users' awareness regarding ethical and legal issues in future.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D7.3 - OPTIMAI - Ethics Recommendations and Regulatory Framework

  • Gurzawska, Agata
  • Hayes, Paul
  • Teodoro, Emma|||0000-0001-9086-3616
  • Guillén, Andrea|||0000-0002-5093-1474
  • Gurzawska, Agata
D7.3 Ethics Recommendations and Regulatory Framework provides the OPTIMAI Consortium with an informational resource to support pilot activities that respect the moral and legal rights of human research participants in the industrial/industry 4.0 employment context. This deliverable builds upon previous deliverables dealing with ethics and legal issues including D9.1 Report on the OPTIMAI Ethical and Legal Framework, and D9.2 Report on the OPTIMAI Ethical, Legal, and Societal Risks - 1 st Version. This deliverable builds upon and refines both ethics and legal requirements presented in those deliverables, utilising ethics and legal partners UAB and TRI's most up-to-date understanding of the tools to be deployed and the environments in which they will be deployed. Additional guidance on ethical procedures to be observed and executed in managing ethical human research participation is also provided, bearing in mind the relevant circumstances of the pilot sites. In building upon and refining the work undertaken in previous deliverables, UAB and TRI have notably taken a country-specific approach to examining end-user and technical partners' legal obligations. A general section dealing with GDPR requirements notwithstanding, this deliverable provides a country-by-country breakdown of highlights of relevant national law in the United Kingdom, Spain, and Greece, where OPTIMAI pilot activities will take place. The particular areas of law detailed include data protection law, employment law, equality law, and health and safety law. A non-exhaustive list of legal requirements are presented to aid all partners, but particularly end-user partners, in making decisions in the design and implementation of OPTIMAI solution research activities in the industrial context that respect the rights of human research participants and comply with the laws of the countries where these activities will take place. Furthermore, the insights of the deliverable can be beneficial in similar contexts after the end of the project raising end-users' awareness regarding ethical and legal issues in future.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D2.2 - OPTIMAI - User and ethics and legal requirements II

  • Mastos, Theofilos
  • Teodoro, Emma|||0000-0001-9086-3616
  • Guillén, Andrea|||0000-0002-5093-1474
  • Gurzawska, Agata
  • Hayes, Paul
  • Margetis, Georges
  • Ntoa, Stavroula
  • Tinker, Greg
  • Pantoja, Sebastián
  • Papadopoulos, Angelos
The purpose of the deliverable D2.2 'User and ethics and legal requirements II' is to identify and analyse the new requirements that have emerged during M7 and M14 and update the previously identified requirements concerning zero defect manufacturing, quality inspection, production re-configuration and other technology needs of the OPTIMAI pilot partners as well as the legal and ethical issues related to the development and implementation of the platform. The analysis of the initial gathered user and ethics and legal requirements is used as the basis of the initial developments and integration activities of the OPTIMAI project. The requirements elicitation and analysis take into account the Description of Action (DoA), the requirements identified and updated from the pilot partners (i.e. manufacturing companies) and the other OPTIMAI partners, based on their knowledge, expertise and more specifically, the needs in the particular domains that the project pursues to address. Additionally, a new set of ethics and legal requirements focusing on the pilot applications is presented. The technological innovation potential requirements identified in the first version of this deliverable, are linked to the stateof-the-art technologies and the identified assets per partner. The update and refinement of the requirements is based on online and shopfloor meetings, videos and photos from the pilot sites, while the method used will be re-iterated through each of the project phases. The identified requirements are grouped into functional and nonfunctional requirements. Functional requirements describe what the system should do and are classified according to the components of the OPTIMAI architecture. Non-functional requirements are grouped into KPIs, ethics, legal and technology innovation potential requirements. In total 192 requirements are identified out of which 34 are updated and 65 are new. 148 are prioritised as "Must" (have), 35 as "Should" (have) and 9 as "Could" (have).
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D2.4 - OPTIMAI - The OPTIMAI architecture specifications

  • Apostolakis, Konstantinos C.
  • Guillén, Andrea|||0000-0002-5093-1474
  • Arampatzis, Dimitrios
  • Margetis, Georges
  • Tsita, Christina
  • Bogdos, George
  • Böttinger, Andreas
  • Ubis, Fernando
  • Papageorgiou, Elpiniki
  • Verardi, Sabrina
  • Pistone, Manfredi Giuseppe
  • Gómez, Andrea
  • Teodoro, Emma|||0000-0001-9086-3616
  • Hayes, Paul
  • Gurzawska, Agata
This document contains the preliminary description of the OPTIMAI smart manufacturing solution architecture based on the elicited stakeholders' requirements and use case scenario definitions that preceded it. This first version architecture (M12) is the outcome of a three-step design methodology which started with relevant technology exploration in the context of D2.3. This process was followedup through a closer examination of the most prominent reference architectural models provisioned for smart manufacturing and industrial Internet of Things applications. A top-down design approach was then carried out using the original OPTIMAI architecture proposition as a starting point so as to identify the various components and subsystems that deliver on the specified needs and requirements of the end-users. Through this exercise, the architecture was broken down into 36 basal components. Each one of those base elements was then elaborated by project partners responsible for their implementation through a bottom-up functional specification. Through this process, three architectural viewpoints are defined for the OPTIMAI envisioned solution in this document, namely the functional, information and deployment view. The functional view delivers a high-level overview of the envisioned system functionality broken down into the identified subsystems and individual components, all of whom are described in terms of their foreseen roles and responsibilities within the runtime operation of the system. Aspects related to integration, such as the interrelationships among platform components are presented, in order to guide the development of the necessary intercommunication mechanisms between components. This process is complemented by means of aligning the resulting architectural components to prominent Industry 4.0 reference architecture models and principles. The Information view then elaborates on the flow of information through the system, highlighting how components create, communicate and consume information during envisioned system operation to deliver on the use cases' goals. Finally, the deployment view presents topological considerations in terms of defining the execution environment for the various system components at a later stage during the project lifetime. The contents of this deliverable are provided as a first version documentation of the envisioned system's shape and structure, and are expected to be updated upon completion of the architecture and system specification activities in M18 of the project lifetime.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D2.6 - OPTIMAI - OPTIMAI use cases definition

  • Mastos, Theofilos
  • Teodoro, Emma|||0000-0001-9086-3616
  • Guillén, Andrea|||0000-0002-5093-1474
  • Tinker, Greg
  • Pantoja, Sebastián
  • Gurzawska, Agata
  • Hayes, Paul
The purpose of the deliverable "D2.6 OPTIMAI use cases definition" is to define and describe the OPTIMAI industrial use-cases for implementing the project's developed solutions in the three pilots. Dedicated use-cases definition online meetings and workshops have been conducted in order to develop the pilot use-cases based on their industrial needs. A specific set of KPI's will be measured in the three pilot sites as well as their validation procedures are provided for each of the use-cases. In total, 24 use-cases have been identified from the three industrial pilots, covering all the three areas: quality inspection; production line set-up/calibration; and production planning. The identified use-cases have been linked with specific user requirements as identified in "D2.1 User and ethics and legal requirements I", which was submitted in June 2021.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D2.3 - OPTIMAI - State of the art survey

  • Papageorgiou, Elpiniki
  • Teodoro, Emma|||0000-0001-9086-3616
  • Guillén, Andrea|||0000-0002-5093-1474
  • Casanovas, Pompeu|||0000-0002-0980-2371
  • Theodosiou, Theodosis
  • Papageorgiou, Elpiniki
  • Charalampous, Paschalis
  • Dimitriou, Nikos
  • Gómez, Andrea
  • Gurzawska, Agata
  • Hayes, Paul
  • Margetis, Georges
  • Tinker, Greg
This report is in fulfilment of requirements for Deliverable D2.3 of OPTIMAI. The document reports the State-of-the-Art in related scientific fields and identifies relevant research initiatives. Information contained herein is the result of activities performed in Task 2.2 (State of the art analysis, existing and past research initiatives). The key activities performed in this task are summarized in the following list: - Short introduction to Industry 4.0 to support the relevance and necessity of artificial intelligence in modern industry. - Assessment of the state-of-the-art within existing results coming from related projects, to identify which ones are relevant to OPTIMAI. This assessment was performed in terms of functionality provided, innovation capacity, technology, license, status, etc. - Assessment of the state-of-the-art within relevant scientific domains, including Artificial Intelligence (AI) for Industry, Metrology, AI-enhanced Digital Twins, Internet of Things (IoT) sensors, Computer Vision and Augmented Reality. - For the sake of completeness, a survey on ethical aspects is also performed. This is kept short since it is subject to other Deliverables of OPTIMAI. The review methodology is described in detail, in terms of sources, search keys, criteria for selection/exclusion etc., so that this work is repeatable. 269 articles were finally considered for inclusion in this report. Upon review of all relevant works, findings are summarized and discussed. The use of artificial intelligence technologies in various industrial fields is explored and investigated; enlightening graphs are produced to visualize the distribution and popularity of each AI-tech, implying its suitability for different purposes.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D1.2 - OPTIMAI - Data Management Plan - 1st version

  • Rubattino, Cinzia
  • Verardi, Sabrina
  • Gurzawska, Agata
  • Hayes, Paul
  • Guillén, Andrea|||0000-0002-5093-1474
  • Teodoro, Emma|||0000-0001-9086-3616
This report is the first version of the OPTIMAI Data Management Plan (DMP), delivered as D1.2 - Data Management Plan - 1st version. The purpose of the data management plan is to identify the scope for data management within the project and then to consider in turn the datasets present within the project. Overall, the OPTIMAI data management plan is intended to be a living document that is regularly updated throughout the remainder of the project as information about the data present within the project becomes more expressive and new datasets emerge. In this document, the initial approach to data management within OPTIMAI has been presented by establishing the types of data likely to be encountered, the FAIR approach to data management and how it is specifically applied within the project, processes for the management of personal data and further ethical and security considerations. The complete legal and ethical framework of OPTIMAI will be developed and reported in WP9. The final part of the report then reviews each work package and task for any related data management requirements identified until M6, establishing a first list of datasets within the project. Although at this stage, some of this information remains incomplete or is yet to be determined this overview provides a solid basis for the data management lifecycle.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D1.3 Data Management Plan

  • Rubattino, Cinzia
  • Verardi, Sabrina
  • Gurzawska, Agata
  • Hayes, Paul
  • Guillén, Andrea|||0000-0002-5093-1474
  • Teodoro, Emma|||0000-0001-9086-3616
This report is the second version of the Data Management Plan (DMP) for the OPTIMAI project, provided as D1.3 - Data Management Plan - 2nd version in month 12 of the project. The overall purpose of this document is to support the data management lifecycle for all data that will be collected, stored, processed or generated by the project in order to maximise its access, according to the H2020 Pilot on Open Research Data (ORDP) in which the project participates. The DMP aims to identify the scope for data management within the project and then to consider in turn the datasets present within the project. The OPTIMAI approach will be in full compliance with the EU legislative and regulatory framework for ethics and data protection. So, in this document main regulations and basic concepts of the EU legal framework are summarised. A Data Management Plan Methodology is defined to provide the general rules and mechanisms for the access management of project data. Each dataset in the project is identified and described and information is provided about the extent to which it is standard compliant, and how the data will be available, accessible, interoperable and reusable. The approach to data management within OPTIMAI is presented by establishing the types of data likely to be encountered, the FAIR approach to data management and how it is specifically applied within the project, processes for the management of personal data and further ethical and security considerations. The complete legal and ethical framework of OPTIMAI will be developed and reported in WP9. The final part of the report then reviews each work package and task for any related data management requirements identified until M12, establishing an initial list of datasets within the project. So far, a total of 22 datasets have been identified in this version of the deliverable, being most of them data that will be collected and processed by the four pilot use cases. Other datasets are mostly stakeholders' information and public deliverables produced within the project scope. Although at this stage, some of this information remains incomplete or is yet to be determined this overview provides a solid basis for the data management lifecycle. Overall, the OPTIMAI data management plan is intended to be a living document that is regularly updated throughout the remainder of the project as information about the data present within the project becomes more complete and new datasets emerge. As living document, it will be updated during the course of the project in new versions at M24 and M36.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

D8.6 OPTIMAI commercialization and exploitation strategy

  • Rubattino, Cinzia
  • González-Conejero, Jorge|||0000-0001-7002-1358
  • Verardi, Sabrina
  • Gurzawska, Agata
  • Gómez, Andrea
  • Mitsiaki, Andreana
  • Böttinger, Andreas
  • Zanesco, Antonio
  • Valero López, Clara Isabel
  • Papageorgiou, Elpiniki
  • Ubis, Fernando
  • Bogdos, George
  • Margetis, Georges
  • Tinker, Greg
  • Henriksson, Linda
  • Dimitriou, Nikos
  • Carratù, Pietro
  • Pantoja, Sebastián
  • Mastos, Theofilos
Deliverable D8.6 OPTIMAI commercialization and exploitation strategy 1 st version is the first version of the OPTIMAI Exploitation Plan. Exploitation aims at ensuring that OPTIMAI becomes sustainable well after the conclusion of the research project period so as to create impact. OPTIMAI intends to develop an industry environment that will optimize production, reducing production line scrap and production time, as well as improving the quality of the products through the use of a variety of technological solutions, such as Smart Instrumentation of sensors network at the shop floor, Metrology, Artificial Intelligence (AI), Digital Twins, Blockchain, and Decision Support via Augmented Reality (AR) interfaces. The innovative aspects: Decision Support Framework for Timely Notifications, Secure and adaptive multi-sensorial network and fog computing framework, Blockchain-enabled ecosystem for securing data exchange, Intelligent Marketplace for AI sharing and scrap re-use, Digital Twin for Simulation and Forecasting, Embedded Cybersecurity for IoT services, On-the-fly reconfiguration of production equipment allows businesses to reconsider quality management to eliminate faults, increase productivity, and reduce scrap. The OPTIMAI exploitation strategy has been drafted and it consists of three phases: Initial Phase, Mid Phase and Final Phase where different activities are carried out. The aim of the Initial phase (M1 to M12), reported in this deliverable, is to have an initial results' definition for OPTIMAI and the setup of the structures to be used during the project lifecycle. In this phase, also each partner's Individual Exploitation commitments and intentions are drafted, and a first analysis of the joint exploitation strategies is being presented. The next steps, leveraging on the outcomes of the preliminary market analysis, will be to update the Key Exploitable Results with a focus on their market value and business potential and to consolidate the IPR Assessment and set up a concrete Exploitation Plan. The result of the next period of activities will be reported in D8.7 OPTIMAI commercialization and exploitation strategy - 2nd version due at month 18 (June 2022).