Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

GEARS a toolbox for Global parameter Estimation with Automated Regularisation via Sampling

  • Pitt, Jake Alan
  • Banga, Julio R.
1 zip file, GEARS (Global parameter Estimation with Automated Regularisation via Sampling) is a Matlab toolbox for parameter estimation in nonlinear dynamic models composed of deterministic ordinary differential equations (ODEs). GEARS is based on the combination of three main strategies: (i) global optimisation (to avoid convergence to local solutions), (ii) reduction of the search space (i.e. tighter bounds on parameters), (iii) regularised estimation, a strategy used to handle overfitting (i.e. fitting the noise rather than the signal). As a result, GEARS can allow the user to avoid both underfitting and overfitting problems while requiring minimum supervision from the user. These capabilities are especially useful when calibrating ODE-based models with highly nonlinear and flexible dynamics (e.g. models of biological oscillators), SyMBioSys – Systematic Models for Biological Systems Engineering Training Network 675585, European Commission; Spanish MINECO/FEDER project SYNBIOCONTROL (DPI2017-82896-C2-2-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Full observability and estimation of unknown inputs, states and parameters of nonlinear biological models [Software]

  • Tsiantis, Nikolaos
  • Villaverde, A. F.
  • Banga, Julio R.
1 zip file, This is a supplementary code repository for the article: N. Tsiantis, A. F. Villaverde, and J. R. Banga. Full observability and estimation of unknown inputs, states and parameters of nonlinear biological models. Submitted, 2019. In this article, we investigate the simultaneous inference of states, time-invariant parameters and time-dependent inputs in biological modelling. In other words we consider both the theoretical observability problem (FISPO) and the practical full system reconstruction problem (optimal tracking). Here we provide the scripts to run the optimal tracking problem for the case studies presented in the aforementioned article, This research was supported by the European Union's Horizon 2020 research and innovation pro-gram under grant agreement No 675585 (MSCA ITN 'SyMBioSys'). This research was alsofunded by the Spanish Ministry of Science, Innovation and Universities, project SYNBIOCON-TROL (ref. DPI2017-82896-C2-2-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 3)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in Tsiantis, N., E. Balsa-Canto and J. R. Banga (2018) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Bioinformatics 34(14):2433-2440 [1]. In order to run these scripts, users will need: - a Matlab R2015 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Users need to make sure that the above AMIGO2 toolbox is fully functional before attempting to run the inverse optimal control case studies. Please refer to the AMIGO2 documentation. All the input files for the 4 case studies and their particular subcases are given with the same names as reported in the main paper and the supplementary information of [1]. Detailed instructions to run each case study are provided in readme.txt files., Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data., European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 2)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in [1]. In order to run these scripts, users will need: - a Matlab R2015 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Users need to make sure that the above AMIGO2 toolbox is fully functional before attempting to run the inverse optimal control case studies. Please refer to the AMIGO2 documentation. All the input files for the 4 case studies and their particular subcases are given with the same names as reported in the main paper and the supplementary information of [1]. Detailed instructions to run each case study are provided in readme.txt files, Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In Tsiantis, N., E. Balsa-Canto and J. R. Banga (2018) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Bioinformatics, bty139 [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 1)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in [1]. In order to run these scripts, users will need: - a Matlab R2017 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Detailed instructions to run each case study are provided in readme.txt files., Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In Tsiantis, N., E. Balsa-Canto and J. R. Banga (2017) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Submitted [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

GEARS: Original release

  • Pitt, Jake Alan
  • Banga, Julio R.
1 file, This is the original release of the GEARS toolbox, SyMBioSys – Systematic Models for Biological Systems Engineering Training Network 675585, European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

GEARS: v1.1

  • Pitt, Jake Alan
  • Banga, Julio R.
1 file, GEARS a toolbox for Global parameter Estimation with Automated Regularisation via Sampling by Jake Alan Pitt and Julio R. Banga, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network 675585, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Using optimal control to understand complex metabolic pathways [Software]

  • Tsiantis, Nikolaos
  • Banga, Julio R.
In order to run the scripts to reproduce the results shown in the paper, you will need a Matlab installation under Windows (Linux not tested, although it should run). Requirements: - Matlab version R2015b or later (tested with version R2015b using a 64-bit Windows 7 Professional operating system with Intel(R) Xeon(R) CPU E5-2630 @ 2.30GHz and 16GB RAM.) - Matlab toolboxes: Optimization Toolbox, Symbolic Toolbox - ICLOCS version 1.2.1 available at http://www.ee.ic.ac.uk/ICLOCS/ICLOCS_Old.htm and documented at http://www.ee.ic.ac.uk/ICLOCS/user_guide.pdf - ICLOCS also requires: SUNDIALS TB, CVODES (check ICLOCS documentation for their installation) - AMIGO2, available from https://sites.google.com/site/amigo2toolbox/home Installation: - install Matlab and the recommended toolboxes, and make sure they can be executed normally - install AMIGO2 and test it running the included examples - install ICLOCS and test it running the included examples, Software source code for the paper: Tsiantis, Nikolaos, Banga, Julio R. Using optimal control to understand complex metabolic pathways. BMC Bioinformatics 21, 472 (2020). https://doi.org/10.1186/s12859-020-03808-8, This research has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 675585 (MSCA ITN "SyMBioSys") and from the Spanish Ministry of Science, Innovation and Universities and the European Union FEDER under project grant SYNBIOCONTROL (DPI2017-82896-C2-2-R), Peer reviewed