Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modelling the energy harvesting from ceramic-based microbial fuel cells by using a fuzzy logic approach

  • De Ramón-Fernández, Alberto
  • Salar-García, María José
  • Ruiz-Fernandez, Daniel
  • Greenman, John
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Microbial fuel cells (MFCs) is a promising technology that is able to simultaneously produce bioenergy and treat wastewater. Their potential large-scale application is still limited by the need of optimising their power density. The aim of this study is to simulate the absolute power output by ceramic-based MFCs fed with human urine by using a fuzzy inference system in order to maximise the energy harvesting. For this purpose, membrane thickness, anode area and external resistance, were varied by running a 27-parameter combination in triplicate with a total number of 81 assays performed. Performance indices such as R2 and variance account for (VAF) were employed in order to compare the accuracy of the fuzzy inference system designed with that obtained by using nonlinear multivariable regression. R2 and VAF were calculated as 94.85% and 94.41% for the fuzzy inference system and 79.72% and 65.19% for the nonlinear multivariable regression model, respectively. As a result, these indices revealed that the prediction of the absolute power output by ceramic-based MFCs of the fuzzy-based systems is more reliable than the nonlinear multivariable regression approach. The analysis of the response surface obtained by the fuzzy inference system determines that the maximum absolute power output by the air-breathing set-up studied is 450 μW when the anode area ranged from 160 to 200 cm2, the external loading is approximately 900 Ω and a membrane thickness of 1.6 mm, taking into account that the results also confirm that the latter parameter does not show a significant effect on the power output in the range of values studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards the optimisation of ceramic-based microbial fuel cells: A three-factor three-level response surface analysis design

  • Salar-García, María José
  • De Ramón-Fernández, Alberto
  • Ortiz-Martínez, Víctor Manuel
  • Ruiz-Fernandez, Daniel
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Microbial fuel cells (MFCs) are an environment-friendly technology, which addresses two of the most important environmental issues worldwide: fossil fuel depletion and water scarcity. Modelling is a useful tool that allows us to understand the behaviour of MFCs and predict their performance, yet the number of MFC models that could accurately inform a scale-up process, is low. In this work, a three-factor three-level Box–Behnken design is used to evaluate the influence of different operating parameters on the performance of air-breathing ceramic-based MFCs fed with human urine. The statistical analysis of the 45 tests run shows that both anode area and external resistance have more influence on the power output than membrane thickness, in the range studied. The theoretical optimal conditions were found at a membrane thickness of 1.55 mm, an external resistance of 895.59 Ω and an anode area of 165.72 cm2, corresponding to a maximum absolute power generation of 467.63 μW. The accuracy of the second order model obtained is 88.6%. Thus, the three-factor three-level Box–Behnken-based model designed is an effective tool which provides key information for the optimisation of the energy harvesting from MFC technology and saves time in terms of experimental work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Microbial oils as nutraceuticals and animal feeds

  • Galán, Beatriz
  • Santos-Merino, María
  • Nogales, Juan
  • De la Cruz, Fernando
  • García, José Luis
45 p.-5 fig.-3 tab., Lipids and oils are produced by all single-cell organisms for essential structural and functional roles; however, the term single cell oils (SCOs) is mainly restricted to describe the lipids produced by a limited number of oleaginous microorganisms (archaea, bacteria, yeast, fungi, and microalgae) with oil contents higher than 20% of biomass weigh. SCOs have different fatty acid compositions from those of plant seed or fish oils and are nowadays considered as new sources of nutraceuticals and animal feeds. In spite of the current commercial success of some SCOs, the development of more efficient microbial fermentation processes and the possibility of manipulating by systems metabolic engineering the lipid composition of cells require new biotechnological strategies to obtain high yields of the desired SCOs. Understanding the synthesis and regulatory mechanisms involved in the production of SCOs is fundamental to eliminate the metabolic bottlenecks that impair achieving high oil yields., This chapter is supported by grants from the Community of Madrid and the Structural Funds of the European Union (Ref: S2013/ABI2783 (INSPIRA1-CM)), the Ministry of Economy, the Industry and Competitiveness (Ref: RTC-2016-4860-2; Ref: BFU2014-55534-C2-1-P), and the Intramural Program of the CSIC (Ref: 201420E086) and the H2020 FET-OPEN program (LIAR: Ref 686585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Living architecture: metabolic applications for next-generation, selectively programmable bioreactors

  • Hogle, Molly
  • Imhof, Barbara
  • Hoheneder, Waltraut
  • Armstrong, Rachel
  • Ieropoulos, Ioannis
  • Wallis, Lauren
  • You, Jiseon
  • Nogales, Juan
Vital natural resources are depleting and being wasted in today's industrialized and agricultural processes. Critical planetary boundaries have been transgressed with major effects on biodiversity loss and climate change. Necessary elements for our daily life such as nitrogen and phosphorus are being lost through household wastewater. The EU-funded project Living Architecture which is currently under development addresses these issues through a selectively programmable bioreactor that recovers phosphates, cleans water, and produces electricity. The Living Architecture system, to be realized in 2019 as a partition wall to be incorporated into existing buildings, is further speculated in design scenarios, including a remote research facility for extreme environments and for application into the urban context as infrastructure., The project Living Architecture GA no 686585 has received funding from the European Union's Horizon 2020 Research and Innovation Program. Project SHEE – Self-deployable Habitat for Extreme Environments GA no 312747 has received funding from the European Union's FP7 Research and Innovation Program., Peer reviewed