Pasar al contenido principal

CATALIZADORES ACIDOS/BASICOS DE CARBON A PARTIR DE RESIDUOS LIGNOCELULOSICOS PARA LA OBTENCION DE PRODUCTOS QUIMICOS DE INTERES INDUSTRIAL

CTQ2012-36408

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Kinetic study of SO2 removal over lignin-based activated carbon

  • Rosas, Juana M.
  • Ruiz-Rosas, Ramiro
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
Adsorption of SO2 on an activated carbon obtained by chemical activation of kraft lignin with zinc chloride was studied in a laboratory column. The presence of oxygen and water vapor in the inlet stream increases the SO2 adsorption capacity of the carbon, due to the surface oxidation of the SO2 to SO3 and the subsequent hydration to H2SO4. Desorption of the SO2 chemisorbed at temperatures in the range of 150–300 °C produces carbon gasification, forming oxygen surface groups that decompose mainly as CO at higher temperatures (>−500 °C). The presence of CO2 in the inlet gas decreases the SO2 adsorption capacity of the carbon. However, the presence of NO does not produce any significant change in the adsorption of SO2, at the studied conditions. The breakthrough curves of the SO2 adsorption are predicted adequately by a rigorous mathematical model that takes into account the catalytic oxidation of SO2 by an Eley-Rideal mechanism and the reaction between adsorbed SO3 and water vapor to produce H2SO4, followed by the elution of the adsorbed H2SO4 that releases the active sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Removal of paracetamol on biomass-derived activated carbon: Modeling the fixed bed breakthrough curves using batch adsorption experiments

  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Marqués, María D.
  • Cotoruelo, Luis M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
The remediation of paracetamol (PA), an emerging contaminant frequently found in wastewater treatment plants, has been studied in the low concentration range (0.3–10 mg L−1) using as adsorbent a biomass-derived activated carbon. PA uptake of up to 100 mg g−1 over the activated carbon has been obtained, with the adsorption isotherms being fairly explained by the Langmuir model. The application of Reichemberg and the Vermeulen equations to the batch kinetics experiments allowed estimating homogeneous and heterogeneous diffusion coefficients, reflecting the dependence of diffusion with the surface coverage of PA. A series of rapid small-scale column tests were carried out to determine the breakthrough curves under different operational conditions (temperature, PA concentration, flow rate, bed length). The suitability of the proposed adsorbent for the remediation of PA in fixed-bed adsorption was proven by the high PA adsorption capacity along with the fast adsorption and the reduced height of the mass transfer zone of the columns. We have demonstrated that, thanks to the use of the heterogeneous diffusion coefficient, the proposed mathematical approach for the numerical solution to the mass balance of the column provides a reliable description of the breakthrough profiles and the design parameters, being much more accurate than models based in the classical linear driving force.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrospinning of silica sub-microtubes mats with platinum nanoparticles for NO catalytic reduction

  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Loscertales, Ignacio G.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
Silica sub-microtubes loaded with platinum nanoparticles have been prepared in flexible non-woven mats using co-axial electrospinning technique. A partially gelated sol made from tetraethyl orthosilicate was used as the silica precursor, and oil was used as the sacrificial template for the hollow channel generation. Platinum has been supported on the wall of the tubes just adding the metallic precursor to the sol–gel, thus obtaining the supported catalyst by one-pot method. The silica tubes have a high aspect ratio with external/internal diameters of 400/200 nm and well-dispersed platinum nanoparticles of around 2 nm. This catalyst showed a high NO conversion with very high selectivity to N2 at mild conditions in the presence of excess oxygen when using C3H6 as reducing agent. This relevant result reveals the potential of this technique to produce nanostructured catalysts onto easy to handle conformations.