Pasar al contenido principal

REPRODUCCION DIGITAL AVANZADA DE LA GONIOAPARIENCIA VISUAL DE OBJETOS

DPI2015-65814-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Accurate physics-based digital reproduction of effect coatings

  • Huraibat, Khalil
  • Perales, Esther
  • Kirchner, Eric
  • Van der Lans, Ivo
  • Ferrero Turrión, Alejandro
  • Campos Acosta, Joaquín
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
We built an improved 3D rendering framework to accurately visualize the complete appearance of effect coatings, including metallic effects, sparkle and iridescence. Spectral reflectance measurements and sparkle indexes from a commercially available multi-angle spectrophotometer (BYKmac-i) were used together with physics-based approaches, such as flake-based reflectance models, to implement efficiently the appearance reproduction from a small number of bidirectional measurement geometries. With this rendering framework, we rendered a series of effect coating samples on an iPad display, simulating how these samples would be viewed inside a Byko-spectra effect light booth. We validated the appearance fidelity through psychophysical methods. We asked observers to evaluate the most important visual attributes that directly affect the appearance of effect coatings, i.e., the color, the angular dependence of color (color flop) and the visual texture (sparkle and graininess). Observers were asked to directly compare the rendered samples with the real samples inside the Byko-spectra effect light booth. In this study, we first validated the accuracy of rendering the color flop of effect coatings by conducting two separate visual tests, using flat and curved samples respectively. The results show an improved accuracy when curved samples were used (acceptability of 93% vs 80%). Secondly, we validated the digital reproduction of both color and texture by using a set of 30 metallic samples, and by including texture in the rendering using a sparkle model. We optimized the model parameters based on sparkle measurement data from the BYK-mac I instrument and using a matrix-adjustment model for optimization. The results from the visual tests show that the visual acceptability of the rendering is high at 90%.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Graininess characterization by multidimensional scaling

  • Perales, Esther
  • Burgos Fernández, Francisco Javier
  • Vilaseca Ricart, Meritxell
  • Viqueira, Valentín
  • Martínez-Verdú, Francisco M.
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
A validation of the graininess attribute was made by means of a psychophysical experiment and the multidimensional scaling algorithm. A visual experiment was designed to obtain graininess differences to be used like the dissimilarity matrix in the MDS algorithm. The results revealed that two dimensions are needed to characterize the graininess effect. The BYK-mac-i instrument and a gonio-hyperspectral imaging system were employed to evaluate the statistical dimensions. On one hand, the first dimension correlated well with the graininess value provided by the BYK-mac-i (r2 = 0.9566). However, we were unable to find a relationship with dimension 2 and any parameter measured by this instrument. Furthermore, the images captured by the gonio-hyperspectral imaging system were processed. A good relationship with the correlation parameter was observed (r2 = 0.8958). However, no relationship was established with dimension 2. Based on these conclusions, further research is necessary that focuses on the new imaging processes and a new visual experiment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Review of instrumental inter‐agreement study of spectral and colorimetric data of commercial multiangle spectrophotometers

  • Perales, Esther
  • Micó-Vicent, Bàrbara
  • Huraibat, Khalil
  • Martínez-Verdú, Francisco M.
  • Dietz, Christian
  • Yamanoi, Yuta
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
Several different instruments have been introduced into the market to obtain good color characterization for different measurement configurations. These commercial instruments have different optical and working configurations, however, the measurement data provided by each instrument should be similar to have good consistency when comparing them to each other measuring the same sample material. Therefore, the purpose of this work was to apply an inter‐model agreement study of spectral and colorimetric data of three instruments (CM‐M6, BYK‐mac‐I, and MA98). Two different statistical tests were applied following ASTM recommendations. In general, the measurement geometries close to the specular direction and the flop direction showed greater deviations. In addition, the partial color differences calculated for the comparison of MA98 versus CM‐M6 were larger than the BYK‐mac‐i versus CM‐M6 comparison. Finally, it can be concluded that most of the measurement geometries were statistically significantly different from each other which means that these differences were due to systematic or bias errors and not exclusively to random errors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visual validation of the appearance of chromatic objects rendered from spectrophotometric measurements

  • Huraibat, Khalil
  • Perales, Esther
  • Kirchner, Eric
  • Van der Lans, Ivo
  • Ferrero Turrión, Alejandro
  • Campos Acosta, Joaquín
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
We validate a physically based and spectral rendering framework with improved color reproduction. With a recently developed model, we take into account both the colorimetric specifications of the rendering display as well as the spectral and angular characteristics of lighting and also the spectral reflectance of the objects. Therefore, it should provide much better color reproduction than those based on the common standard red, green, blue (sRGB) color space. In addition, it allows real-time rendering on modest hardware and displays. We evaluated the color reproduction of the new rendering framework by psychophysical tests using spectrophotometric measurements of 30 chromatic paint samples. They were rendered on an iPad display, as viewed inside the Byko-spectra effect light booth. We asked 16 observers to evaluate the color match by directly comparing the rendered samples with the physical samples, using two different psychophysical assessment methods. The color reproduction was found to be strongly improved with respect to results obtained with default sRGB color encoding space. The average color reproduction match was found to be equivalent to ΔE00=1.6, which is a small but noticeable color difference. In 80% of the visual assessments, the color reproduction was described as being at least as good as between “difference visible but still acceptable” and “difference visible, doubtful match.”
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters: “A Case Study”

  • Micó-Vicent, Bàrbara
  • Perales, Esther
  • Huraibat, Khalil
  • Martínez-Verdú, Francisco M.
  • Viqueira, Valentín
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
In order to consider 3D objects from suitable Fused Deposition Modelling (FDM) printers as prototypes for the automotive sector, this sample must be able to reproduce textural effects (sparkle or graininess) or metallic or gonio-appearance to reinforce the attractive appeal of these materials. This study worked with two different commercial filaments: grey metallic PLA (poly(lactic acid)) and ABS (acrylonitrile-butadiene-styrene copolymer) with diffractive pigments. For both materials, a statistical design of experiments (DoE) was carried out to find the printing parameters effect on the final 3D-objects gonio-appearance. The selected printing parameters were printing speed (2 levels), layer height (2 levels) and sample thickness (3 levels). Twelve smooth square objects were printed from each material. The ABS-diffractive filaments achieved the most significant flop and higher sparkle values than metallic PLA. Graininess was high when working with PLA filaments instead of ABS. Layer height was the most significant parameter to maximize PLA objects’ flop or sparkle effects. The best result was found when printing at 0.1 mm. For the ABS samples, the stronger flop and sparkle effects were achieved with the 50 mm/s printing speed, the 0.1 mm layer height and the lowest thickness level. This study shows the methodology to study the printing parameters effects and interactions to maximize the FDM-3D-objects gonio-appearance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Definition of a measurement scale of graininess from reflectance and visual measurements

  • Ferrero Turrión, Alejandro
  • Velázquez, José Luis
  • Perales, Esther
  • Campos Acosta, Joaquín
  • Martínez-Verdú, Francisco M.
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
Effect pigments in coatings produce eye-catching colour and texture effects and are widely used in automotive, cosmetics, coatings, inks, flooring, textile or decoration. One of these texture effects is graininess, which is the perceived texture exhibited when the effect coating is observed under diffuse illumination. To date there is not a standard procedure to measure graininess from reflectance measurements. The objective of this work is to propose a methodology for traceable graininess measurements, similarly as it was proposed for colour in 1931. In this article, the relevant reflectance-based quantities are clearly defined, and a formal relation with data from visual experiments is given. This methodology would allow a measurement scale of graininess and a difference formula to be agreed once conclusive visual data become available.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Finding the Additives Incorporation Moment in Hybrid Natural Pigments Synthesis to Improve Bioresin Properties

  • Micó-Vicent, Bàrbara
  • Jordán, Jorge
  • Perales, Esther
  • Martínez-Verdú, Francisco M.
  • Cases, Francisco
  • Perales, Esther|||/items/3c441acb-4c61-4b30-b94e-907ed26edd23
  • Martínez-Verdú, Francisco M.|||/items/1b2eb36f-ce01-47d8-b72f-b852349c01a7
Interest in applications of natural dye applications has increased because of their antibacterial properties and the possibility of extracting them from nature and residues. Using nanoclays as hosts to reinforce natural dye properties has been successfully demonstrated. However, no one has attempted to optimize the polymer matrix and hybrid pigment properties at the same time to ensure the best final properties for bio-composite applications. Using a statistical design for experiments, we propose the best combination of modifiers with the best nanoclay as the host of three natural dyes: chlorophyll, β-carotene, and betanine. Using the L9 Taguchi designs, we learned both the influence of the nanoclay structure, and the addition moment of surfactant, mordant salt, and silane modifiers. FTIR, XRD, DTG, integration sphere spectrophotometer, and UV-aging tests were used to characterize the hybrid pigments and epoxy bioresin composites. The degradation temperatures of the three natural dyes rose and the reinforcement of the stability of three natural dyes to UV–Vis radiation exposure was demonstrated, which avoided the migration of these dyes from bioresin to wet ribbing. Optimal results were obtained with hydrotalcite clay (calcined or not) by using surfactant and mordant before the natural dye, and before or after silane.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Advanced digital reproduction of goniochromatic objects

  • Huraibat, Khalil
The digital reproduction of materials has developed greatly over the past decades. The improved interactive rendering technology available nowadays enables broad digital visualization applications like gaming, cinema and film production, advertising, and online shopping. These recent advances in digital technologies are also playing an important role in the improvement of some industrial processes such as computer-aided design and manufacturing, virtual prototyping, and scientific visualization and simulation. Currently, many rendering software packages provide impressive images and often even claim photorealism. However, producing realistic appearance images is very challenging taking into account the high sensitivity of the human visual system. The visual appearance of products is still an important aspect to take into account even for the digital simulation of materials, since the appearance of these simulated products on the screen is still a critical parameter in the purchase decision of customers. During the last years different efforts have been carried out by industrial manufacturers in different applications, such as textile, cosmetic, automotive, etc., to provide attractive visual effects and new visual impressions of their products using, for instance, innovative effect pigments, also called goniochromatic pigments. The digital rendering of these pigments is a very active hot topic since this type of coatings changes considerably its visual attributes such as color and texture with the illumination/viewing geometry. Achieving accurate simulation of these materials demands an extra effort due to the physical complexity of their surfaces. Special BRDFs (bidirectional reflectance distribution functions) reflectance models are needed to characterize their visual appearance. This complex appearance is produced due to the presence of special effect pigments containing metallic, interference, or pearlescent pigments, which are responsible for the strong dependence of the color of these coatings on viewing and illumination directions. These pigments also exhibit visually complex texture effects such as sparkle and graininess. Under bright direct illumination conditions, such as sunlight, the flakes create a sparkling effect, while under diffuse illumination such as a cloudy sky, effect coatings create a salt and pepper appearance or a light/dark irregular pattern, which is usually referred to as graininess or coarseness. Two main issues limit the digital reproduction of effect pigments. The first issue is related to the current display technologies. The quality of the displays is an essential component toward accurate color reproduction of materials. Previous studies have evaluated the validity of available display technologies for the visualization and digital reproduction of effect pigments, which are usually not enough for the reproduction of such a wide variety of colors due to their limited color gamut. The second limitation is more related to the current rendering software. The color accuracy of their images is often not sufficient for the reproduction of colors and effects produced by these materials. The available rendering software provides impressive images that serve the needs for applications such as the cinema and games industries, but when it comes to more critical applications such as automotive design, the color accuracy of their rendered images is not accurate enough, especially for such complex materials such as effect pigments. The first issue is addressed in this thesis by, evaluating the performance of the new Quantum dots (QDs) display technology for the reproduction of effect pigments. For further improving the display capability, a new solution is given by developing a multi-primary display model based on the QDs technology (addressed in the first research article of this thesis in chapter 1). The proposed multi-primary display model provides an expanded color gamut, which guarantees a better reproduction of effect pigments. In a first step, the emission spectral radiance curves of the three RGB channels of a commercial QD display were fitted to a four-parameter function. From this modeling, it is possible to gain new theoretical color primaries by selecting new spectral peaks (cyan, yellow, magenta, and/or additional RGB primaries) and imposing colorimetric conditions for the resulting white of this proposed theoretical multi-primary display. Proper characterization to assess the performance of the display was conducted to know if the basic “gain-offset-gamma” (GOG) model can be used for direct and inverse color reproduction (from RGB to CIE-XYZ, and vice versa). The GOG model was found to well characterize this display. The spatial uniformity of the display was also evaluated in luminance and color chromaticity terms. Finally, with the primaries modeling and color characterization based on the GOG model, a 5-primary model (RGBYC) was tested. The evaluation of this theoretical RGBYC display model confirms the gamut enlargement, which can also improve goniochromatic color reproduction. In the second place, and focusing on the second issue, a big portion of the work of this thesis was dedicated to the development of a new 3D rendering tool for improved and accurate visualization of the complete appearance of effect coatings, including metallic effects, sparkle, and iridescence (addressed in the second and third research articles of this thesis in chapters 2 and 3). This task was carried on by firstly building a specific rendering framework for this purpose, using a multi-spectral and physically based rendering approach, and secondly, by validating the performance of this rendering framework through psychophysical tests. Spectral reflectance measurements and sparkle indices from a commercially available multi-angle spectrophotometer (BYK-mac i) were used together with a physically based approach, such as flake-based reflectance models, to efficiently implement the appearance reproduction from a small number of bidirectional measurement geometries. With this rendering framework, a virtual representation of a set of effect coating samples is reproduced on an iPad display, by simulating how these samples would be viewed inside a Byko-spectra effect light booth. Therefore, for this purpose, an accurate virtual representation of the Byko light booth was built using a physically based representation of global illumination. The rendering framework also accounts for the colorimetric specifications of the rendering display (iPad5) by applying the recent device-specific MDCIM model. The appearance fidelity of the rendering was validated through psychophysical methods. For this task, observers were asked to evaluate the most important visual attributes that directly affect the appearance of effect coatings, i.e., color, the angular dependence of color (color flop), and visual texture (sparkle and graininess). Observers were asked to directly compare the rendered samples with the real samples inside the Byko-spectra effect light booth. The visual validation was performed in three different steps. In the first study, the accuracy of rendering the color of solid samples is evaluated. In a second step, the accuracy of rendering the color flop of effect coatings is validated by conducting two separate visual tests, by using flat and curved samples respectively. In the third and last step, the digital reproduction of both color and texture of metallic samples is tested, by including texture effects in the rendering by using a sparkle visualization model. The parameters of the sparkle visualization model were optimized based on sparkle measurement data from the BYK-mac i instrument using a matrix-adjustment model. Results from the visual evaluations prove the high color accuracy of the developed rendering tool. In the first test, the visual acceptability of the rendering was 80%. This percentage is much better than what was found in a previous investigation using the default sRGB color encoding space. Results of the second study show an improved accuracy when curved samples were used (acceptability of 93% vs 80%). The final visual test shows high visual acceptability of the rendering at 90%. In conclusion, this thesis provides a method for accurate digital simulation of effect coatings, by developing a multispectral and physically based rendering approach on a simple iPad tablet computer. The research developed in this thesis comes with many advances in the scientific and industrial levels, with a great contribution to the development of innovative tools for digitization of materials, as needed in today’s society.