Pasar al contenido principal

NANOMATERIALES NOVEDOSOS PARA LA CAPTURA Y CONVERSION DE CO2

MAT2013-45008-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon nanotube-supported Ni–CeO2 catalysts. Effect of the support on the catalytic performance in the low-temperature WGS reaction

  • Dongil, Ana Belén
  • Pastor Pérez, Laura
  • Escalona, Néstor
  • Sepúlveda-Escribano, Antonio
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
The low temperature water-gas shift (WGS) reaction has been studied over two commercial multiwall carbon nanotubes-supported nickel catalysts promoted by ceria. For comparison purposes, activated carbon-supported catalysts have also been studied. The catalytic performance and the characterization by N2 adsorption analysis, powder X-ray diffraction (XRD), temperature-programmed reduction with H2 (TPR-H2), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analysis showed that the surface chemistry has an important effect on the dispersion of ceria. As a result, ceria was successfully dispersed over the carbon nanotubes (CNTs) with less graphitic character, and the catalyst afforded better activity in WGS than the catalyst prepared over massive ceria. Moreover, a 20 wt.% CeO2 loading over this support was more active than the analogous catalyst with a 40 wt.% loading. The ceria nanoparticles were smaller when the support was previously oxidized, however this resulted in a decrease of the activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unusual flexibility of mesophase pitch-derived carbon materials: An approach to the synthesis of graphene

  • Barreda, Daniel
  • Pérez-Mas, Ana Matilde
  • Silvestre Albero, Ana
  • Casco, Mirian Elizabeth
  • Rudić, Svemir
  • Herdes, Carmelo
  • Müller, Erich A.
  • Blanco, Clara
  • Santamaria, Ricardo
  • Silvestre-Albero, Joaquín
  • Rodríguez Reinoso, Francisco
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Structural flexibility in a petroleum pitch-derived carbon material has been indirectly evaluated using X-ray diffraction (XRD), immersion calorimetry and inelastic neutron scattering (INS) measurements. Exposure of the carbon material to an organic solvent (e.g., n-nonane) gives rise to a large internal rearrangement, associated with a drastic re-ordering of the graphitic microdomains. These structural changes are also associated with a high flexibility of the internal porous network, as observed by inelastic neutron scattering measurements. The internal rearrangement and the structural flexibility could be responsible for the excellent performance of this kind of activated carbons in a wide variety of adsorption processes. Last but not least, the structural characteristics of these carbon materials composed of graphitic microdomains has been used to synthesize graphene “egg-like” flakes following a simple procedure based on exfoliation with organic solvents.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bimetallic Cu–Ni catalysts for the WGS reaction – Cooperative or uncooperative effect?

  • Pastor Pérez, Laura
  • Gu, Sai
  • Sepúlveda-Escribano, Antonio
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
In this work, bimetallic Cu–Ni catalysts have been studied in the water-gas shift (WGS) reaction, and they have shown different levels of synergy and anti-synergy in terms of catalytic activity and selectivity to the desired products. Cu–Ni interactions alter the physicochemical properties of the prepared materials (i.e. surface chemistry, redox behaviour, etc.) and as a result, the catalytic trends are influenced by the catalysts' composition. Our study reveals that Cu enhances Ni selectivity to CO2 and H2 by preventing CO/CO2 methanation, while Ni does not help to improve Cu catalytic performance by any means. Indeed, the monometallic Cu formulation has shown the best results in this study, yielding high levels of reactants conversion and excellent long-term stability. Interestingly, for medium-high temperatures, the bimetallic 1Cu–1Ni outperforms the stability levels reached with the monometallic formulation and becomes an interesting choice even when start-up/shutdowns operations are considered during the catalytic experiments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Catalytic Upgrading of Biomass Model Compounds: Novel Approaches and Lessons Learnt from Traditional Hydrodeoxygenation – a Review

  • Jin, Wei
  • Pastor Pérez, Laura
  • Shen, DeKui
  • Sepúlveda-Escribano, Antonio
  • Gu, Sai
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
Catalytic hydrodeoxygenation (HDO) is a fundamental process for bio‐resources upgrading to produce transportation fuels or added value chemicals. The bottleneck of this technology to be implemented at commercial scale is its dependence on high pressure hydrogen, an expensive resource which utilization also poses safety concerns. In this scenario, the development of hydrogen‐free alternatives to facilitate oxygen removal in biomass derived compounds is a major challenge for catalysis science but at the same time it could revolutionize biomass processing technologies. In this review we have analysed several novel approaches, including catalytic transfer hydrogenation (CTH), combined reforming and hydrodeoxygenation, metal hydrolysis and subsequent hydrodeoxygenation along with non‐thermal plasma (NTP) to avoid the supply of external H2. The knowledge accumulated from traditional HDO sets the grounds for catalysts and processes development among the hydrogen alternatives. In this sense, mechanistic aspects for HDO and the proposed alternatives are carefully analysed in this work. Biomass model compounds are selected aiming to provide an in‐depth description of the different processes and stablish solid correlations catalysts composition‐catalytic performance which can be further extrapolated to more complex biomass feedstocks. Moreover, the current challenges and research trends of novel hydrodeoxygenation strategies are also presented aiming to spark inspiration among the broad community of scientists working towards a low carbon society where bio‐resources will play a major role.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Physico-chemical characterization of metal-doped bone chars and their adsorption behavior for water defluoridation

  • Rojas-Mayorga, Cintia Karina
  • Bonilla-Petriciolet, Adrian
  • Silvestre-Albero, Joaquín
  • Aguayo-Villarreal, Ismael A.
  • Mendoza-Castillo, Didilia I.
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
New bone chars for fluoride adsorption from drinking water have been synthetized via metallic doping using aluminum and iron salts. A detailed statistical analysis of the metal doping process using the signal-to-noise ratios from Taguchi's experimental designs and its impact on the fluoride adsorption properties of modified bone chars have been performed. The best conditions, including the proper metallic salt, for metal doping were identified to improve the fluoride uptakes of modified bone chars. Results showed that the fluoride adsorption properties of bone chars can be enhanced up to 600% using aluminum sulfate for the surface modification. This aluminum-based adsorbent showed an adsorption capacity of 31 mg/g, which outperformed the fluoride uptakes reported for several adsorbents. Surface interactions involved in the defluoridation process were established using FTIR, DRX and XPS analysis. Defluoridation using the metal-doped bone chars occurred via an ion exchange process between fluoride ions and the hydroxyl groups on the adsorbent surface, whereas the Al(OH)xFy, FexFy, and CaF2 interactions could play also an important role in the removal process. These metal-doped adsorbents anticipate a promising behavior in water treatment, especially in developing countries where the efficiency – cost tradeoff is crucial for implementing new defluoridation technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Promoter effect of sodium in graphene-supported Ni and Ni–CeO2 catalyst for the low-temperature WGS reaction

  • Dongil, Ana Belén
  • Pastor Pérez, Laura
  • Sepúlveda-Escribano, Antonio
  • Reyes, Patricio
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
The low temperature water–gas shift (WGS) reaction has been studied over Ni–CeO2/Graphene and Ni/Graphene. The catalysts were prepared with 5 wt.% Ni and 20 wt.% CeO2 loadings, by deposition-precipitation employing sodium hydroxide and urea as precipitating agents. The materials were characterized by TEM, powder X-ray diffraction, Raman spectroscopy, H2-temperature-programmed reduction and X-ray photoelectron spectroscopy (XPS). The characterization and the reaction results indicated that the interaction between the active species and the support is higher than with activated carbon, and this hinders the reducibility of ceria and thus the catalytic performance. On the other hand, the presence of residual sodium in samples prepared by precipitation with NaOH facilitated the reduction of ceria. The catalytic activity was highly improved in the presence of sodium, what can be explained on the basis of an associative reaction mechanism which is favored over Ni-O-Na entities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly efficient Ni/CeO2-Al2O3 catalysts for CO2 upgrading via reverse water-gas shift: Effect of selected transition metal promoters

  • Yang, Liuqingqing
  • Pastor Pérez, Laura
  • Gu, Sai
  • Sepúlveda-Escribano, Antonio
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
In the context of Carbon Capture and Utilisation (CCU), the catalytic reduction of CO2 to CO via reverse water-gas shift (RWGS) reaction is a desirable route for CO2 valorisation. Herein, we have developed highly effective Ni-based catalysts for this reaction. Our study reveals that CeO2-Al2O3 is an excellent support for this process helping to achieve high degrees of CO2 conversions. Interestingly, FeOx and CrOx, which are well-known active components for the forward shift reaction, have opposite effects when used as promoters in the RWGS reaction. The use of iron remarkably boosts the activity, selectivity and stability of the Ni-based catalysts, while adding chromium results detrimental to the overall catalytic performance. In fact, the iron-doped material was tested under extreme conditions (in terms of space velocity) displaying fairly good activity/stability results. This indicates that this sort of catalysts could be potentially used to design compact RWGS reactors for flexible CO2 utilisation units.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ni stabilised on inorganic complex structures: superior catalysts for chemical CO2 recycling via dry reforming of methane

  • Le Saché, Estelle
  • Pastor Pérez, Laura
  • Watson, David
  • Sepúlveda-Escribano, Antonio
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
CO2 utilisation is becoming an appealing topic in catalysis science due to the urgent need to deal with greenhouse gases (GHG) emissions. Herein, the dry reforming of methane (DRM) represents a viable route to convert CO2 and CH4 (two of the major GHG) into syngas, a highly valuable intermediate in chemical synthesis. Nickel-based catalysts are economically viable materials for this reaction, however they show inevitable signs of deactivation. In this work stabilisation of Ni in a pyrochlore-perovskite structure is reported as a viable method to prevent fast deactivation. Substitution of Zirconium by Ni at various loadings in the lanthanum zirconate pyrochlore La2Zr2O7 is investigated in terms of reactant conversions under various reaction conditions (temperature and space velocity). XRD analysis of the calcined and reduced catalysts showed the formation of crystalline phases corresponding to the pyrochlore structure La2Zr2-xNixO7-δ and an additional La2NiZrO6 perovskite phase at high Ni loadings. Carbon formation is limited using this formulation strategy and, as a consequence, our best catalyst shows excellent activity for DRM at temperatures as low as 600 °C and displays great stability over 350 h of continuous operation. Exsolution of Ni from the oxide structure, leading to small and well dispersed Ni clusters, could explain the enhanced performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Illuminating solid gas storage in confined spaces – methane hydrate formation in porous model carbons

  • Borchardt, Lars
  • Nickel, Winfried
  • Casco, Mirian Elizabeth
  • Senkovska, Irena
  • Bon, Volodymyr
  • Wallacher, Dirk
  • Grimm, Nico
  • Krause, Simon
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Methane hydrate nucleation and growth in porous model carbon materials illuminates the way towards the design of an optimized solid-based methane storage technology. High-pressure methane adsorption studies on pre-humidified carbons with well-defined and uniform porosity show that methane hydrate formation in confined nanospace can take place at relatively low pressures, even below 3 MPa CH4, depending on the pore size and the adsorption temperature. The methane hydrate nucleation and growth is highly promoted at temperatures below the water freezing point, due to the lower activation energy in ice vs. liquid water. The methane storage capacity via hydrate formation increases with an increase in the pore size up to an optimum value for the 25 nm pore size model-carbon, with a 173% improvement in the adsorption capacity as compared to the dry sample. Synchrotron X-ray powder diffraction measurements (SXRPD) confirm the formation of methane hydrates with a sI structure, in close agreement with natural hydrates. Furthermore, SXRPD data anticipate a certain contraction of the unit cell parameter for methane hydrates grown in small pores.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly active Cu-ZnO catalysts for the WGS reaction at medium–high space velocities: Effect of the support composition

  • Price, Cameron
  • Pastor Pérez, Laura
  • Le Saché, Estelle
  • Sepúlveda-Escribano, Antonio
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
Cu-ZnO based catalysts are the benchmark materials for the low-temperature WGS reaction. However, they present a crucial drawback which limits their application in portable devices: they only work under very low space velocities. In this study, we have developed a series of multicomponent Cu-ZnO catalysts able to work at relatively high space velocities with outstanding activity and stability. Different reference supports have been utilised with CeO2-Al2O3 being the most promising system. Overall, this work describes a strategy to design advanced Cu-based catalysts that can overcome the residence time restrictions in the WGS reaction.