Pasar al contenido principal

XXX

MAT2014-59961-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient WO3 photoanodes fabricated by pulsed laser deposition for photoelectrochemical water splitting with high faradaic efficiency

  • Fàbrega, Cristian
  • Murcia-López, Sebastián
  • Monllor-Satoca, Damián
  • Prades, Juan Daniel
  • Hernández-Alonso, María Dolores
  • Penelas, Germán
  • Morante, Joan Ramon
  • Andreu, Teresa
  • Monllor-Satoca, Damián|||/items/ad103271-d5d2-4d69-8944-a59d0a0be58c
In this work, we present a systematic study on the synthesis of monoclinic γ-WO3 obtained using pulsed laser deposition (PLD). A photocurrent of 2.4 mA/cm2 (60% of the optical maximum for a 2.7 eV gap material) was obtained for films as thick as 18 μm. FE-SEM images revealed that WO3 films were actually formed by an array of oriented columns. Efficient hole extraction toward the electrolyte was observed and attributed to a possible accommodation of the electrolyte between the WO3 columns, even for relatively compact films. This feature, combined with the detailed optical absorption and IPCE characterization, allowed us to implement a double-stack configuration of WO3 photoanodes which resulted in a remarkable photocurrent density of 3.1 mA cm−2 with 1 sun AM1.5 G illumination in 0.1 M H2SO4 electrolyte. Faradaic efficiencies of more than 50% was obtained without co-catalyst, which is one the highest values reported for pure WO3. By adding a 3 nm layer of Al2O3 by ALD, a faradaic efficiency of 80% was reached without diminishing the photocurrent density.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

What do you do, titanium? Insight into the role of titanium oxide as a water oxidation promoter in hematite-based photoanodes

  • Monllor-Satoca, Damián
  • Bärtsch, Mario
  • Fàbrega, Cristian
  • Genç, Aziz
  • Reinhard, Sandra
  • Andreu, Teresa
  • Arbiol, Jordi
  • Niederberger, Markus
  • Morante, Joan Ramon
  • Monllor-Satoca, Damián|||/items/ad103271-d5d2-4d69-8944-a59d0a0be58c
Hematite (α-Fe2O3) is a promising photoanode in solar water splitting devices with a set of intrinsic limitations that lessen its maximum performance; among the methods used for improving its photoactivity, titanium doping has witnessed an intensive research during recent years. However, the origin of the Ti-induced enhancement remains elusive to date with the lack of a systematic mechanistic study. In this contribution, we prepared mesoporous hematite (host)–titania (guest) composite films by mixing the respective preformed nanoparticles obtained by a non-aqueous sol–gel route in a wide range of loading levels (0–20 mol%) up to the solid state solubility limits of both components. Voltammetric and impedance measurements were performed observing an optimum 10% doping, with a 15-fold photocurrent increase (up to 1.3 mA cm−2 at 1.23 VRHE) and a 100-fold decrease in the charge transfer resistance. The roles of surface states and charge donor (dopant) densities were also assessed, assuming a charge transfer mechanism through hole trapping at surface states and its isoenergetic transfer to water; an optimum 10–15% doping range was obtained similarly to photocurrent, where the maximum overlapping between surface and water states is prevalent. Finally, HR-TEM and EELS measurements were employed to detect the presence of pseudobrookite and titania phases (20% doping), evincing that hematite–pseudobrookite heterojunctions have a beneficial cascade of charge transfers but titania-pseudobrookite heterojunctions depict a deleterious “hole mirror” mechanism that prevents water photooxidation. Tailoring the combined effect of donor states (conductivity), phase coexistence (solubility), heterojunctions (energetics) and surface states (kinetics) in the composite paves the way for understanding the mechanism of other dopant-induced changes and could be extended to further photoactive materials.