Pasar al contenido principal

AVANCES EN TECNOLOGIAS GUIADAS PARA LOS PROXIMOS EQUIPOS DE COMUNICACIONES POR SATELITE

PID2022-136590OB-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mitigation of Corona Discharge Breakdown in ESIW Bandpass Filters

  • Seller-Rueda, Antonio
  • Marini, Stephan
  • Herraiz, Darío
  • Belenguer, Ángel
  • Esteban González, Héctor
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this work, corona discharge breakdown thresholds in empty substrate integrated waveguide (ESIW) bandpass filters are investigated and experimentally validated for the first time. The objectives are the analysis and subsequent enhancement of the peak power handling capability (PPHC) of inductive ESIW filters operating in low-pressure environments, where gas breakdown may limit the maximum admissible RF power level. First, the critical regions where the electric field (EF) reaches its maximum amplitude are identified by full-wave electromagnetic (EM) simulations. Then, an enhancement strategy based on the introduction of drilled apertures in the ESIW covers is applied, in order to reshape the field distribution in the most critical zones without compromising the in-band response. The results show a consistent increase in the corona discharge threshold at low pressure, between 2 and 3.1dB, with respect to a reference ESIW bandpass filter of the same electrical specifications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Compact Ka-Band Triplexer based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Ferrando-Rocher, Miguel
  • Soto Pacheco, Pablo
  • Gimeno, Encarnación
  • Seller-Rueda, Antonio
  • Boria Esbert, Vicente Enrique
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this work, a compact Ka-band triplexer based on half-mode groove gap waveguide (HM-GGW) technology is proposed. The triplexer has a manifold herringbone config-uration, where three bandpass HM-GGW filters are directly coupled to the common shorted line without the use of stubs, and vertical transitions to the input/output rectangular ports are also included. Three channels centred at 27.65, 29 and 30 GHz, with relative bandwidths from 1.45% to 2.06%, are combined. In order to validate this solution, a prototype has been successfully designed and fabricated, demonstrating that HM-GGW is an attractive technology for implementing complex microwave components for high-frequency applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, Sarah
  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • García Barceló, Jose María
  • San Blas Oltra, Ángel Antonio
  • Sancho, M.
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • Boria Esbert, Vicente Enrique
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García Jiménez, Raúl
  • San Blas Oltra, Ángel Antonio
  • Bonte, Sarah
  • Coves Soler, Ángela María
  • Sánchez-Soriano, Miguel Ángel
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ka-band diplexer design based on half-mode groove gap waveguide

  • Marini, Stephan
  • Ferrando-Rocher, Miguel
  • Morales-Hernández, Aitor
  • Gimeno, Encarnación
  • López, Alejandro Jorge
  • Boria Esbert, Vicente Enrique
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
This paper shows the practical design of a Ka-band tuning-less diplexer in half-mode groove gap waveguide (HM-GGW) technology for multi-beam satellite applications. This new technology can be easily manufactured, since it lets the design of two separate metallic pieces: one for the cover with periodic pins, and another one for the half-groove gap waveguide structure. The proposed diplexer is composed of two bandpass HM-GGW filters, an H-plane T-junction and the corresponding transitions to the input/output WR28 rectangular ports. To illustrate how this technology can be applied, a prototype has been successfully fabricated, showing in-band measured return and insertion losses of 21 dB and 0.87 dB in the lower band, 16 dB and 0.86 dB in the upper band, and a good isolation level (better than 32.5 dB) in the whole operational frequency range.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design of Low-Pass Corrugated Filters Based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Seller-Rueda, Antonio
  • Soto Pacheco, Pablo
  • Gimeno, Encarnación
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this paper, low-pass corrugated filters based on half-mode groove gap waveguide (HMGGW) technology are proposed for the first time. The design process starts from the equivalent classical low-pass implementation in corrugated rectangular waveguide. Then, the final response is achieved after a slight re-optimization of groove widths and lengths. As a proof of concept, two corrugated low-pass filters with upper cutoff frequencies at 27 and 29.5 GHz, and maximum attenuation rejection at 34.5 and 39 GHz, respectively, have been designed and manufactured. In spite of the frequency range of operation, the return losses are better than 19.5 dB for both tuning-less filter prototypes, while measured insertion losses are lower than 0.25 dB and 0.3 dB, respectively, in almost the entire passband. The very good agreement between simulations and measurements fully validates the use of this new emerging technology for the implementation of low-pass filters at high frequency bands.