Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Compact Ka-Band Triplexer based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Ferrando-Rocher, Miguel
  • Soto Pacheco, Pablo
  • Gimeno, Encarnación
  • Seller-Rueda, Antonio
  • Boria Esbert, Vicente Enrique
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this work, a compact Ka-band triplexer based on half-mode groove gap waveguide (HM-GGW) technology is proposed. The triplexer has a manifold herringbone config-uration, where three bandpass HM-GGW filters are directly coupled to the common shorted line without the use of stubs, and vertical transitions to the input/output rectangular ports are also included. Three channels centred at 27.65, 29 and 30 GHz, with relative bandwidths from 1.45% to 2.06%, are combined. In order to validate this solution, a prototype has been successfully designed and fabricated, demonstrating that HM-GGW is an attractive technology for implementing complex microwave components for high-frequency applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, Sarah
  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • García Barceló, Jose María
  • San Blas Oltra, Ángel Antonio
  • Sancho, M.
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • Boria Esbert, Vicente Enrique
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García Jiménez, Raúl
  • San Blas Oltra, Ángel Antonio
  • Bonte, Sarah
  • Coves Soler, Ángela María
  • Sánchez-Soriano, Miguel Ángel
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance.