Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET for Long-term protection of crystalline zinc phosphide (Zn3P2) under atmospheric conditions

  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
  • Rabelo Freitas, Helena
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
This dataset contains experimental measurement data and analysis files used to generate the figures of the associated publication. It includes raw and modeled spectroscopic ellipsometry data, X-ray diffraction (XRD), Raman spectroscopy, secondary-ion mass spectrometry (SIMS), X-ray photoelectron spectroscopy (XPS), and photoluminescence data. -- The data are organized by manuscript figure and supplementary figure number and are provided together with Jupyter notebooks used for data processing and visualization. Detailed information on data acquisition is provided in the associated publication, while the dataset structure and usage are described in the accompanying README file. -- Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data are provided in a separate associated dataset archived at https://doi.org/10.34810/data2689., Dataset for the work titled: Long-term protection of crystalline zinc phosphide (Zn₃P₂) under atmospheric conditions, European Commission: EPFLglobaLeaders - A new PhD training for the next generation of sustainable science leaders; 945363. -- Swiss National Science Foundation: Challenges and opportunities of epitaxy of semiconductors on Graphene; 220221. -- European Cooperation in Science and Technology: European Network for Innovative and Advanced Epitaxy; CA20116. -- European Commission: SOLARUP - Advanced Strategies for Development of Sustainable Semiconductors for Scalable Solar Cell Applications; 101046297. -- European Commission: PRTR-C17.I1. -- European Commission: IU16-014206. -- Government of Catalonia: 2021SGR00457. -- Ministerio de Ciencia, Innovación y Universidades: Severo Ochoa Excellence prorgam; CEX2021-001214-S, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: Long-term protection of crystalline zinc phosphide under atmospheric conditions

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
Earth-abundant zinc phosphide (Zn3P2) holds great promise as a photovoltaic absorber for thin-film applications, owing to its direct bandgap of approximately 1.5 eV and its high absorption coefficient in the visible spectrum. Nonetheless, questions remain about the material’s stability in atmospheric environments, given its tendency to react with surrounding water vapor and oxygen. This work presents a comprehensive long-term study to understand how environmental exposure impacts high-quality, monocrystalline epitaxial zinc phosphide. Through a combination of various experimental techniques, such as ellipsometry, Raman spectroscopy, X-ray diffraction measurements, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, secondary ion mass spectroscopy, and X-ray photoelectron spectroscopy, we reveal that exposure to atmosphere causes substantial oxidation of the thin film surface, penetrating several tens of nanometers into the bulk material. Finally, we show that degradation can be effectively prevented by applying a thin dielectric layer, such as Si3N4 ,or simply by storing the unprotected thin films under vacuum. These findings provide valuable guidelines for the proper handling of the material prior to device fabrication., European Union’s Horizon 2020 Marie Sk lodowska-Curie grant: 945363; COST grant: IZCOZ0 220221; OPERA COST grant: CA 20116; Horizon Europe PathFinder Open project SOLARUP: 101046297; European Union NextGenerationEU: PRTRC17.I1; Severo Ochoa program from Spanish MCIN / AEI: CEX2021-001214-S; Generalitat de Catalunya: 2021SGR00457; European Regional Development Fund (ERDF): IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for: "Link between graphene features and the resulting functionality of quasi-Van der Waals Zn3P2"

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Mastropasqua, Chiara
  • Marinoni, Stefano
  • Kawashima, Nico
  • Wodzislawski, Kamil Artur
  • Botti, Silvana
  • Michon, Adrien
  • El Alouani, Ahmed
"-Zn3P2, made from earth-abundant elements, is a promising candidate for thin-film solar cells but faces limitations due, to difficulties in achieving n-type doping and its large lattice mismatch with commercial substrates and a high thermal expansion coefficient, causing defects and cracks. Graphene substrates can address these challenges thanks to its weak Van der Waals interactions with Zn3P2 allowing for mechanical transfer of the thin film and a strain-free growth. This study compares five graphene substrates for quasi-Van der Waals epitaxial (q-VdWe) growth of polycrystalline Zn3P2 thin films using molecular beam epitaxy. Surface features like steps and wrinkles on graphene were identified as main nucleation sites for Zn3P2, provided the graphene has minimal point defects. The highest-quality thin films, with the largest grain sizes, were grown on H-CVD graphene on the Si-face of 6H-SiC, featuring solely terraces of atomic height. All substrates showed comparable growth windows for crystalline Zn3P2, with higher growth temperatures improving crystal quality, as indicated by enhanced photoluminescence. Cryo-cathodoluminescence measurements revealed spatially localized sub-bandgap emissions, potentially linked to localized strain fields at grain boundaries of up to ±3% as identified by cross-sectional transmission electron microscopy. This work provides insights into advantages and drawbacks of utilising q-VdWe to produce Zn3P2 thin films for solar cell applications and highlights the roles of graphene substrate choice and growth parameters on Zn3P2 film quality.", COST grant: Grant number: IZCOZ0_220221; SNF Spark grant: Grant number: CRSK-2_221120; Grant agency: Generalitat de Catalunya: Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU: Grant number: PRTR-C17.I1 ; Grant agency: Severo Ochoa program from Spanish MCIN: Grant number: CEX2021-001214-S; Grant agency: Horizon Europe through the PathFinder Open project SOLARUP: Grant number: -101046297; Grant agency: European Regional Development Fund (ERDF): Grant number: IU16-014206; Grant agency: VanaSiC project: Grant number: ANR-22-CE24-0022-01; Grant agency: ADICT project: Grant number: ANR-22-PEEL-0011, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: Nanopatterning Optimization of Zinc Phosphide: Hole Mobility up to 560 cm2/Vs with Selective Area Epitaxy (Version 1.1) [Dataset]

  • Rabelo Freitas, Helena
  • Jordi Arbiol
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Webb, Leo Evan
  • Aigroz, Cynthia
Zinc phosphide (Zn3P2) has been identified as a promising material for low-cost photovoltaics made of earth-abundant elements. In the 90’s, the low performance of the devices based on Zn3P2 was attributed to the poor quality of the crystal. Recently, selective area epitaxy (SAE) has emerged as a method to obtain high quality materials on lattice mismatched substrates, thanks to efficient strain relaxation. Here, we study the relation between the SAE mask characteristics and the resulting optoelectronic properties of Zn3P2 thin films. Photoluminescence spectroscopy and temperature dependent Hall measurements outline the impact of those defects on the optoelectronic properties of the thin films. We correlate the effect of the SAE mask pattern on the formation of specific defects such as stacking faults and rotated domains. Our results suggest that the rotated domains contribute to the carrier transport by providing p-type carriers while the stacking faults are mainly acting as non-radiative recombination centers. Our thickness dependent measurements highlight the key role of the SiO2/Zn3P2 interface, which could induce a highly p-doped region. Overall, these findings drove the optimization of the SAE pattern leading to a record hole mobility (520 cm2/Vs) ever measured for this material. (2025-10-22), Kind of Data: Experimental data; Images, Grant agency: Swiss State Secretariat for Education, Research and lnnovation (SERI), grant number: 2200018; Grant agency: Horizon Europe PathFinder Open project SOLARUP, Grant number: 101046297; Grant agency: Swiss National Science Foundation (SNSF Spark grant), Grant number: CRSK-2-221120; Grant agency: Generalitat de Catalunya, Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU, Grant number: PRTRC17.I1; Grant agency: Severo Ochoa program from Spanish MCIN / AEI, Grant number: CEX2021-001214-S; Grant agency: European Regional Development Fund (ERDF), Grant number: IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed