Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data From: The sources of variation for individual prey-to-predator size ratios

  • Henriques, Jorge
  • Lacava, Mariángeles
  • Guzmán, Celeste
  • Gavín-Centol, M.P.
  • Ruiz-Lupión, Dolores
  • Mas, Eva de
  • Magalhães, Sara
  • Moya-Laraño, Jordi
[Methods] Spider collection Individuals of Lycosa fasciiventris were collected from June 23rd to July 27th 2015 in four different localities within the Almeria province (South-East Spain), in dry temporal washes (“ramblas”): 1) around Paraje las Palmerillas, Estación Experimental de Cajamar (36.7917°N, 2.6891°O); 2) near Boca de los Frailes village (36.8036°N, 2.1386°O); 3) near Carboneras village (36.9667°N, 2.1019°O) and 4) near Almanzora river (37.3414°N, 2.0078°O). Individuals were then kept separately in the laboratory in a container (22 x 18 x 18 cm) with the bottom filled with 2-3 cm of soil collected from the sampling sites. Two wooden blocks (10 x 8 x 1 cm and 3 x 5 x 1 cm) were added to each tank to provide shelter. Only sub-adult virgin females were used to form the laboratory population. All individuals (adult and sub-adult males, and sub-adult females) were fed once a week with size-matched crickets (Gryllus assimilis; Fabricius 1775) purchased from a pet supply online store Exofauna, Spain (available in: https://exofauna.com). Spiders had access to water ad libitum through a 40 ml vial filled with water and covered with cotton. Tanks were placed in a climate chamber with simulated outdoor climatic conditions (day and night temperature cycles and photoperiod with light fluorescent tubes of 54 W, mimicking natural sunshine, and a relative humidity from 50 to 65%). Climatic conditions were adjusted to the preceding weekly average conditions in the Almeria province, with day-night temperature and light oscillations (temperature: 18.7-34.3 °C; light-dark photoperiod: 17:7-16:8 hours). Breeding design To assess genetic, maternal and environmental variation in individual prey-to-predator size ratio (PPSR), we performed a paternal half-sib split-brood design (Roff 1997; Lynch and Walsh 1998), in which 52 males (sires) were each mated with two virgin females (dams). Each week, offspring were provided with fruit flies (Drosophila melanogaster; Meigen, 1830) originated from cultures produced in the laboratory. Flies were fed with a nitrogen rich medium supplemented with high quality dogfood, which highly improves spider survival (Jensen et al. 2011). Maternal families were constituted by 12 offspring, split into two food availability treatments, varying in the number of flies provided. Thus, 3 out of 12 offspring from each maternal family were assigned to the rich environment, being given 3× the amount of food provided in the poor (or standard) environment. Initially, a single fly was offered to the spiders in the poor treatment and 3 flies in the richer treatment. This quantity was adjusted to 3 and 9 when individuals were approximately 6 months old due to higher food demand at that stage. After hatching, spiderlings of wolf spiders climb to the female back and, in L. fasciiventris, remain with it for a period of a few weeks (Parellada 1998). Due to logistic reasons, all spiderlings were removed from the female back within one week, that is approximately 42 ± 8 (mean ± SD) days after they hatched (age at isolation). To estimate and control for post-hatching common environmental effects occurring on the female back, the age at isolation was included in all models. This variable was never significant (data not shown). Spiderlings were carefully collected from the female back with the help of a paintbrush. We took 12 spiderlings from each female and placed them separately in cylindrical containers (5 cm height and 6 cm diameter). Each container had the bottom covered with filter paper, providing a substrate for both locomotion and absorption of excreta, inside the growth chamber. Filter papers were checked weekly and replaced if necessary. A plastic tip was inserted at the bottom of the container, filled with cotton connected to a reservoir, providing water ad libitum to spiders by capillarity (Moskalik and Uetz 2011). The 1248 spiderling containers were then randomly arranged within the growth chamber to ensure that individuals belonging to the same family were spatially interspersed. This allowed mitigating possible common environmental effects after spiderling isolation from their mothers. Morphometry Body components were divided between structural body size (carapace width; Hagstrum 1971) and body condition (residuals of abdomen width on carapace width; (Jakob et al. 1996). Body condition reflects energy and nutrient storage independently on the size of the spider and thus reflects hunger level (Moya-Laraño et al. 2008). Structural body size may reflect the strength to subdue prey (e.g., Moya-Laraño et al. 2002). Both carapace and abdomen width were measured at their widest point. Body size and body condition were measured in two instances: after individuals were taken from their mothers and isolated, and immediately before the trials for acceptance. Morphometric measurements were taken to the nearest 0.1 mm with a dissection microscope (Leica MZ125). While structural body size measured at the time of trial was needed to calculate prey-to-predator size ratio, body condition at the time of the trial was used to control for the hunger state of each spiderling (i.e. its motivational state). These traits were also measured early in life and used to calculate genetic and maternal correlations, to test how maternal investment in both offspring body size and condition could affect behavioural patterns of the spiders later in life. Prey acceptance This experiment aimed to measure the maximum relative size of a prey cricket (Gryllus assimilis) that a spider accepted, considering a range of cricket lengths (in mm) decreasing from 5× to 1× (in units of 1) the carapace width of the spider. For that, we placed them in experimental arenas where each spider was offered crickets in a decreasing order of relative size until it subdued and killed a cricket. The response variable, prey-to-predator size ratio (PPSR) is the ratio at which the spider attacks and kills the cricket. This measure corresponds to the maximum PPSR (PPSRmax) at which predators kill their prey and the larger the relative size of the prey killed, the higher the PPSR. Spiders were measured in blocks of 17 ± 5 (mean ± SD) individuals. Each block was defined as the experimental batch of individuals assessed in each day. Although this cricket species does not occur in the study site, L. fasciiventris is able to effectively prey on it, and a similar species with similar body size, Gryllus bimaculatus, is highly abundant in the collection area (Moya-laraño personal observation). As it was not feasible to collect G. bimaculatus in numbers enough to carry out this study, we used G. assimilis individuals from an established laboratory population. Note that this approach allowed testing the response of spiders that were naive to this prey, as all spiders had been fed with Drosophila to that point. Thus, this approach minimized environmental variation due to potential effects of previous experiences with cricket prey. In the trial, we used crickets with a length that differed from the target PPSR (5×, 4×, 3×, 2× or 1× of the width of the spider carapace) by less than 0.2 units. Crickets were weighted, and their length determined from a calibration curve, previously generated with the weight and length of 40 crickets: L = 3.22 + 0.32log(M); R2 = 0.99; p < 0.0001; where L is cricket body length (in mm) and M is cricket body mass (in mg). Mass was measured to the nearest 0.1 mg using a high precision scale (Mettler Toledo XP26). None of the crickets were used in more than one trial. To standardize hunger levels across individuals, spiders were left to starve for seven days before being tested, similarly to other studies (Persons and Rypstra 2000). As it was not possible to standardize age across trials, individuals were randomly assigned to each trial. Spider age at the time of each measurement (331 ± 30 days old, mean ± SD) was recorded and later controlled for in the statistical analysis as a covariate (see below). A single spider and one cricket were placed inside the arena (7.5 cm diameter), in opposite sides, within enclosed inverted plastic vials (3 cm diameter). Then, both vials were gently lifted simultaneously, and crickets and spiders were allowed to interact for 6 minutes. If the cricket was not captured and subdued, the spider was enclosed in the vial and the cricket was removed. Spiders were then left to recover in the vial for 30 minutes until a new cricket from the next immediately lower size was presented (lower PPSR). Trials ended as soon as the spider attacked and killed a cricket or if the spider did not catch the smallest (1×) cricket. [Usage Notes] Data used to assess the sources of variation of the maximum prey-to-predator size ratio (PPSRmax) in juveniles of the wolf spider Lycosa fasciiventris using a paternal half-sib split brood design., The relative body size at which predators are willing to attack prey, a key trait for predator-prey interactions, is usually considered invariant. However, this ratio can vary widely among individuals or populations. Identifying the range and origin of such variation is key to understanding the strength and constraints on selection in both predators and prey. Still, these sources of variation remain largely unknown. We filled this gap by measuring the genetic, maternal and environmental variation of the maximum prey-to-predator size ratio (PPSRmax) in juveniles of the wolf spider Lycosa fasciiventris using a paternal half-sib split brood design, in which each male was paired with two different females and the offspring reared in two different food environments: poor and rich. Each juvenile spider was then sequentially offered crickets of decreasing size and the maximum prey size killed was determined. We also measured body size and body condition of spiders upon emergence and just before the trial. We found low, but significant heritability (h2=0.069) and dominance and common environmental variance (d2+4c2=0.056). PPSRmax was also partially explained by body condition (during trial) but there was no effect of the rearing food environment. Finally, a maternal correlation between body size early in life and PPSRmax indicated that offspring born larger were less predisposed to feed on larger prey later in life. Therefore, PPSRmax, a central trait in ecosystems, can vary widely and this variation is due to different sources, with important consequences for changes in this trait in the short and long terms., Ministry of Education and Science, Award: Fundação para a Ciência e a Tecnologia (Portuguese Science and Technology Foundation):PD/BD/106059/2015. Ministerio de Educación, Cultura y Deporte, Award: FPU13/04933. Ministerio de Economía y Competitividad, Award: CGL2015-66192-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

WildlifeCOLLISIONS SPAIN Data, Dataset of wildlife-vehicle collisions in Spain

  • Gabriel Hernando, Miguel de
  • García-Rodríguez, Alberto
  • Revilla, Eloy
[Description of methods used for collection/generation of data] Raw data about wildlife-vehicle collisions in Spain was requested to the different Administrations involved by different means (by mail, by official letter, by transparency portal) between January 2022 and December 2023, [Methods for processing the data] Obtained data from the different Administrations was processed and standardized individually and presented in a single dataset, Wildlife-vehicle collisions are animal-human interactions that may have severe consequences for both human safety and economy. These events may additionally hinder the conservation of endangered species, including some with large economic investments made in their recovery. Obtaining standardized information is crucial for a better characterization of these events and, consequently, for the implementation of measures aiming at reducing their numbers and relevance. In Spain, the information about individual road incidents involving wildlife is gathered by different Administrations and may therefore be difficult to obtain general patterns due to the heterogeneity of the data collected. To solve this problem, here we present a unique and unified dataset of wildlife-vehicle collisions in Spain. We collected the information from the different Administrations, standardizing and including all information of each individual event in this new dataset. This dataset is a valuable resource not only because it will allow a deep characterization of the casuistry of wildlife-vehicle collisions in Spain but also because we believe that it provides a good example of which variables must be collected by the different Administrations responsible of these data., This work was funded by the Spanish Ministry of Science and Innovation through the SUMHAL project (LIFEWATCH2019-09-CSIC-13). A.G.-R. was additionally funded by the EU-NextGenerationEU funds through the 2021–2023 Margarita Salas call for the requalification of the Spanish university system, convened by the Universidad de León., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

WildlifeDAMAGES SPAIN Data, Dataset of wildlife damages to human activities in Spain data

  • García-Rodríguez, Alberto
  • Gabriel Hernando, Miguel de
  • Revilla, Eloy
[Description of methods used for collection/generation of data] Raw data about damages produced by wildlife in Spain was requested to the different Administrations involved by different means (by mail, by official letter, by transparency portal) between January 2022 and December 2023, [Methods for processing the data] Obtained data from the different Administrations was processed and standardized individually and presented in a single dataset., Human population and anthropogenic pressures on Earth´s ecosystems are growing in unprecedented numbers, promoting an increase of animal-human interactions that may have negative effects for both wildlife and humans. Among all types of animal-human interactions, animal-caused damages to human properties and activities (i.e. livestock depredation, crop riding, etc.) are especially relevant, frequently leading to the emergence of human-wildlife conflicts that may additionally jeopardize conservation efforts. In this context, gathering accurate information about damages caused by animals is essential to minimize these conflicts. In Spain, most information about animal-caused damages to human properties and activities is gathered by different regional Administrations (i.e. Comunidades Autónomas), implying that data are generally scattered, fragmented and highly heterogeneous, hindering the implementation of effective and adaptive management strategies aiming at reducing these conflicts. Here we present a unique dataset in which we gathered all the information available about individual damages produced by animals to human activities and properties. Data were collected from different Administrations and subsequently standardized and unified in a single database. This dataset is a valuable resource not only because it will allow a deep characterization of the casuistry of animal-caused damages to human properties and activities in Spain but also because we believe that it provides a good example of which variables must be collected by the different Administrations responsible of collecting these data., This work was funded by the Spanish Ministry of Science and Innovation through the SUMHAL project (LIFEWATCH2019-09-CSIC-13). A.G.-R. was additionally funded by the EU-NextGenerationEU funds through the 2021–2023 Margarita Salas call for the requalification of the Spanish university system, convened by the Universidad de León., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Magnetoelastic anisotropy drives localized magnetization reversal in 3D nanowire networks. Nanoscale [Dataset]

  • Vivas, Laura G.
  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Navas, David
  • Ordoñez-Cencerrado, Amanda A.
  • Manzano, Cristina V.
  • Sanz, Ruy
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call HORIZON-MSCA-2022-PF-01, and having reflected the following statements in the Data Management Plan of such project (ID: 101107507; MIDAS; MSCA Postdoctoral Fellowship), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the principal investigators of the project Laura G. Vivas and Marisol Martin. Please, contact Dr. Laura G. Vivas and Prof. Martín-Gonzalez: laura.g.vivas@csic.es and marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., Three-dimensional magnetic nanowire networks (3DNNs) have shown promise for applications beyond those of their linear counterparts. However, understanding the underlying magnetization reversal mechanisms has been limited. This Dataset refers to the following study in which we present a combined experimental and computational investigation on simplified 3DNNs to address this gap. Our findings reveal a previously unidentified in-plane magnetoelastic anisotropy, validated through comparisons between experimental and simulated magnetic data. Notably, we discovered that magnetization reversal in 3DNNs is driven by highly localized magnetic states, arising from the interplay of exchange and dipolar interactions, magnetoelastic anisotropy, and nanowire microstructure. This discovery challenges the prevailing understanding of magnetization reversal in nickel nanowires. Our work provides critical insights into the magnetic behavior of 3DNNs, opening doors for their tailored design and optimization, This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Postdoctoral Fellowship (MIDAS) grant agreement no. 101107507. R. S. acknowledges financial support from grant PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033. D. N. acknowledges the financial support from the project CNS2022-135949 funded by the Spanish Ministry of Science and Innovation, MCIN/10.13039/501100011033, and by “ESF Investing in your future”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge Nadia Pastor Jimenez for technical support. We thank Xavier Maeder from EMPA for conducting transmission electron backscattered diffraction on Ni nanowires shown in the ESI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

A Generalized Automated Framework for Thermal Characterization: From Bulk Materials to Complex Heterostructures [Dataset]

  • Tenaguillo Arrese, Miguel Ángel
  • Pérez Picazo, Elena
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Precise determination of thermal conductivity in multilayer structures remains a critical challenge for advancing thermoelectric technologies. Conventional techniques often struggle with surface roughness or require complex preparation, hindering the characterization of electrodeposited materials. To address this gap, a fully automated, MATLAB-based computational framework operationalizing the generalized photoacoustic theory for a robust inverse analysis is presented. The methodology is rigorously benchmarked against Bi2Te3/3D anodic aluminum oxide (3D-AAO) reference nanocomposites, reproducing established literature values with high fidelity. Subsequently, the capability of this framework is demonstrated through the characterization of electrodeposited copper selenide (CuxSe) films. Results reveal a systematic dependence of thermal conductivity on copper stoichiometry, offering insights into anharmonicity-driven phonon scattering mechanisms. Comprehensive sensitivity analyses confirm that the photoacoustic signal is predominantly dominated by the film's thermal conductivity. Thus, this work delivers an accessible, validated tool for in situ characterization of structurally non-ideal films, accelerating next-generation energy material development., The authors acknowledge financial support from “ERC Advanced Grant No. 101052603, PowerbyU”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed