Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Information of the article An innovative autonomous robotic system for on-site detection of heavy metal pollution plumes in surface water

  • Vito-Francesco, Elisabetta de
  • Farinelli, Alessandro
  • Yang, Qiuyue
  • Nagar, Bhawna
  • Álvarez, Rafael
  • Merkoçi, Arben
  • Knutz, Thorsten
  • Haider, Alexander
  • Stach, Wolfgang
  • Ziegenbalg, Falko
  • Allabashi, Roza
3 pages. -- 1 table and 1 figure. -- Fig. S1 Representative voltammograms obtained after measurement process with the integrated system in different conditions: (a) laboratory measurement of pure water sample spiked with 50 and 200 µg/L for Pb and Cu respectively. The measured areas were 0.454 µAV (left peak) and 1.816 µAV (right peak) for Pb and Cu, respectively; (b) laboratory measurement in the water tank (500 L) filled with Danube water spiked with 25 µg/L and 100 µg/L for Pb and Cu respectively. The measured areas were 0.396 µAV (left peak) and 1.244 µAV (right peak) for Pb and Cu respectively; (c) laboratory measurement in the water tank (500 L) filled with ground water (bank filtration of Danube) spiked with 25 µg/L and 100 µg/L for Pb and Cu respectively. The measured areas were 1.46 µAV (left peak) and 1.27 µAV (right peak) for Pb and Cu respectively; (d) field measurement of the Danube River. The measured areas were 0.018 µAV for Pb and Cu was not detected (<LOQ). -- Table S1 Comparison of the performance characteristics among the studied integrated system and three other similar portable devices, using electrodes coupled with the SWASV electrochemical method., The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO, Grant No. SEV-2017–0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information 2D/2D Heterojunction of TiO2 Nanosheets / Ultrathin g-C3N4 for efficient photocatalytic hydrogen evolution

  • Du, Ruifeng
  • Li, Baoying
  • Han, Xu
  • Xiao, Ke
  • Wang, Xiang
  • Zhang, Chaoqi
  • Arbiol, Jordi
  • Cabot, Andreu
10 pages. -- Figures and tables. -- Figure S1: SEM image of (a) bulk g-C3N4 and (b) ultrathin g-C3N4, (c) N2 adsorption-desorption isotherms of bCN and uCN. -- Figure S2: FTIR spectra of OAC, OLMA and TiO2 before and after ligands remove. -- Figure S3: Zeta potential distribution spectrum of TiO2 after ligands removal (a) and uCN (b). -- Figure S4: SEM image and EDS compositional maps of a T1/uCN1 composite. -- Figure S5: SEM image of T1/uCN2 and corresponding EDS spectrum. -- Figure S6: SEM image of T1/uCN2 and corresponding EDS spectrum. -- Figure S7: SEM image of T1/uCN2 and corresponding EDS spectrum; Figure S8: Chromatogram plots for 0.5 ml of standard hydrogen injected every half hour. -- Table S1: Gas Chromatography Peak Processing Data based on figure S8. -- Figure S9: Standard hydrogen curve for gas chromatography. -- Table S2: Exponential decay-fitted parameters of fluorescence lifetime of uCN, TiO2 and T1/uCN1. -- Figure S10: Photocatalytic hydrogen generation amount on bCN, TiO2 and T1/bCN1 during 4 h under simulated solar light irradiation; Table S3: Photocatalytic hydrogen production about TiO2/g-C3N4 based catalysts. -- Table S4: The AQE values with different incident light wavelengths for T1/uCN1. -- Figure S11: (a) Stability cycles of the T1/uCN1 for H2 evolution under simulated solar light irradiation; (b) TEM image of T1/uCN1 after 20 h photocatalytic H2 evolution reaction and (c) XRD pattern of T1/uCN1 before and after 20 h photocatalytic H2O2 evolution reaction., CN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCAProgramme / Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for A Novel π-d Conjugated Cobalt Tetraaza[14]annulene based Atomically Dispersed Electrocatalyst for Efficient CO2 Reduction

  • Liang, Zhifu
  • Zhang, Ting
  • Cao, Pengfei
  • Yoshida, Takefumin
  • Tang, Weiqiang
  • Wang, Xiang
  • Zuo, Yong
  • Tang, Peng-Yi
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Yamashita, Masahiro
  • Arbiol, Jordi
16 pages. -- Scheme S1. Scheme of the synthesis of Co-TAA. -- Figure S1. FT-IR spectra of the model compound Co-TAA, and Poly-TAA-Co powder. -- Figure S2. (a-b) HRTEM images and (c-d) STEM images of Poly-TAA-Co. -- Figure S3. EELS chemical composition maps from the red squared area of the STEM micrograph. Individual Co L2,3-edges at 779 eV (red), N K-edges at 401 eV (green), O K-edges at 532 eV (blue), and C-K edges at 284 eV (grey) and composites of Co-N, Co-O, Co-C, N-O and Co-N-C. -- Figure S4. (a)-(b) Survey, high resolution C1s XPS spectra of Poly-TAA powder, respectively. -- Figure S5. (a) Survey, high resolution C1s XPS spectra of Poly-TAA-Co powder, respectively. -- Figure S6 TGA analysis of Poly-TAA-Co under argon by heating to 600 ℃ at the rate of 5 ℃/min. -- Table S1. Co K-edge EXAFS fitting parameters for Poly-TAA-Co. -- Figure S7. N2 adsorption and desorption of Poly-TAA (a), Poly-TAA-Co (b) and Poly-TAA-Co-CNT (c), respectively. -- Figure S8. (a) Total current density of Poly-TAA-Co-CNT (7:3). (b) FE of CO and H2 at various potentials for Poly-TAA-Co-CNT (7:3). -- Figure S9 Current density for H2 production on Poly-TAA-Co-CNT(1:1) and Poly-TAA-Co-CNT(3:7). and. -- Figure S10. Nyquist plots of the electrochemical impedance spectroscopy (EIS) data of (a) Poly-TAA-Co, (b) Poly-TAA-Co-CNT(1:1) and Poly-TAA-Co-CNT(3:7) electrodes after the activation process. -- Figure S11. Linear sweep voltammetry (LSV) curves of (a) Poly-TAA-Co. -- Figure S12. FE of H2 at various potentials on Co-TAA-CNT(3:7), CoPc-CNT(3:7) and Poly-TAA-Co-CNT(3:7). -- Figure S13. XRD patterns of Poly-TAA-Co-CNT loaded on carbon paper before and after CO2RR. -- Figure S14 HAADF-STEM (a, c), BF-TEM (b, d) and HRTEM micrographs (c, e) of Poly-TAA-Co-CNT (3:7) sample (before and after CO2RR). -- Figure S15. EELS chemical composition maps obtained from the red squared area of the STEM micrograph. Individual Co L2,3-edges at 779 eV (red), N K-edges at 401 eV (green), O K-edges at 532 eV (blue), and C-K edges at 284 eV (grey) and composites of Co-N, Co-O, Co-C, N-O and Co-N-C. (Poly-TAA-Co-CNT (3:7), after electrocatalytic CO2RR). -- Figure S16. Calculated energy diagrams for CO2 to CO at -0.5 V conversion on CoPc and CoTAA molecule, respectively. -- Table S2. The comparison of electrochemical reduction of CO2 to CO for reported cobalt based electrocatalysts., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and ICN2 and IREC are funded by the CERCA Programme /Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Funct. Mater., DOI: 10.1002/adfm.202112902 Antibacterial Films Based on MOF Composites that Release Iodine Passively or Upon Triggering by Near- Infrared Light

  • Han, Xu
  • Balcerzak, Mateusz
  • Hernando Moriones, Oscar
  • Cano-Sarabia, Mary
  • Cortés, Pilar
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Llagostera, Montserrat
  • Imaz, Inhar
  • Maspoch, Daniel
18 pages. -- Figure S1. (a) Bright field STEM image of the synthesized AuNRs. (b) Bright field STEM image of the AuNR@SiO2 after the first silica-shell coating. -- Figure S2. (a) STEM micrographs of synthesized AuNR@UiO-66 composite before (left) and after (right) exposure to iodine gas at 75 °C for 3 hours. Note that the AuNRs were etched after having been exposed to the iodine. (b) STEM micrographs of the AuNR@SiO2@UiO-66 composite before (left) and after (right) exposure to iodine at 75 °C for 96 hours, confirming the stability of the silica-coated AuNRs. Scale bar: 500 nm. -- Figure S3. N2-sorption isotherm measurements at 77 K, and corresponding BET plots, for UiO-66 microbeads (a) and AuNR@SiO2@UiO-66 microbeads (b). -- Table S1. Summary of the maximum temperatures reached by each studied material upon irradiation with near-infrared lasers of different intensities. -- Figure S4. (a) Plot of time vs. temperature for AuNR@SiO2@UiO-66 microbeads irradiated for 1 minute with near infrared light at an intensity of 224 mW cm-2. (b) Thermal imaging of the UiO-66 (leftmost) when irradiated at 1000 mW cm-2, and AuNR@SiO2@UiO-66 microbeads when irradiated with an intensity of 52 mW cm-2 (left), 224 mW cm-2 (middle) and 1000 mW cm-2 (right). -- Figure S5. Thermogravimetric analysis curves for pristine UiO-66 microbeads (blue), iodineloaded UiO-66 microbeads (black), and iodine-loaded AuNR@SiO2@UiO-66 microbeads (red). -- Figure S6. (a) PXRD spectra of pristine UiO-66 (black), pristine AuNR@SiO2@UiO-66 (red), UiO-66 after desorption of iodine (blue), and AuNR@SiO2@UiO-66 after desorption of iodine (green). (b) HAADF-STEM micrograph of AuNR@SiO2@UiO-66 after 96-hour exposure to iodine at 75 °C. Scale bar: 100 nm. -- Figure S7. Release of iodine from I2@UiO-66 microbeads (black) and I2@AuNR@SiO2@UiO-66 microbeads (red), without any laser irradiation. Inset: zoomed section of graph. -- Figure S8. FE-SEM micrographs of cross-sections of the composite films containing AuNR@SiO2@UiO-66 microbeads at 0% (a), 8% (b), 25% (c) and 46 (d)% (w/w). -- Figure S9. TGA curves of the iodine-loaded composite films containing AuNR@SiO2@UiO- 66 microbeads at 0% (black), 8% (red), 25% (blue) and 46% (green) (w/w). -- Figure S10. Iodine release over time from the composite films containing AuNR@SiO2@UiO-66 microbeads at 46% (a) and 25% (b) (w/w), without any laser irradiation. -- Figure S11 (a) Stepwise release of iodine from a composite film containing I2@AuNR@SiO2@UiO-66 microbeads at 25% (w/w) irradiated with NIR light at 224 mW cm-2 and subjected to on/off switching. (b) Zoom on the stepwise release after its stabilization at the fifteenth cycle. -- Figure S12. Growth-inhibition zones induced by I2@UiO-66 microbeads (a, b) and I2@AuNR@SiO2@UiO-66 microbeads (c, d) against E. coli (a, c) or S. aureus (b, d) cultures, either after near-infrared light irradiation (left) or without irradiation (right). Ø: diameter of growth-inhibition zone. Disc diameter: 6 mm. -- Figure S13. Growth-inhibition zones induced by square sections of composite films containing iodine-loaded AuNR@SiO2@UiO-66 at 8% (a), 25% (b) and 46% (c) (w/w), against E. coli cultures, either after near-infrared light irradiation (left) or without irradiation (right). Ø: diameter of growth-inhibition zone. Film size: 1 cm2. Values are the average of at least five replicates ± standard deviation. -- Table S2. Growth-inhibition of composite films prepared at different iodine-containing microbead-loadings (8%, 25% or 46%) and tested on E. coli cultures., ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplemental Material: Doubling the mobility of InAs/InGaAs selective area grown nanowires

  • Beznasyuk, Daria V.
  • Martí-Sànchez, Sara
  • Kang, Jung-Hyun
  • Tanta, Rawa
  • Rajpalke, Mohana
  • Stankevič, Tomaš
  • Wulff, Anna Christensen
  • Spadaro, Maria Chiara
  • Bergamaschini, Roberto
  • Maka, Nikhil N.
  • Petersen, Christian Emanuel N.
  • Carrad, Damon J.
  • Jespersen, Thomas Sand
  • Arbiol, Jordi
  • Krogstrup, Peter
20 pages. -- PDF file includes S1. Substrate fabrication and growth details; S2. Degradation of surface topography after thermal oxide removal prior nanowire growth; S3. Faceting of GaAs(Sb) vs GaAs nanowires; S4. The role of InGaAs growth temperature; S5. The role of InAs growth temperature; S6. InAs/InGaAs field effect mobility measurements: influence of the InGaAs buffer growth temperature; S7. InAs/InGaAs band structure simulations; S8. Transport measurements of InGaAs/GaAs(Sb) SAG nanowires without the InAs channel; S9. InAs/InGaAs field effect mobility measurements: influence of the InAs growth temperature, figures and tables., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Direct observation of the chemical transformations in BiVO4 photoanodes upon prolonged light-aging treatments

  • Arcas, Ramón
  • Cardenas-Morcoso, Drialys
  • Spadaro, Maria Chiara
  • García-Tecedor, Miguel
  • Mesa, Camilo A.
  • Arbiol, Jordi
  • Fabregat-Santiago, Francisco
  • Giménez, Sixto
  • Mas-Marzá, Elena
11 pages. -- PDF includes: 1. Experimental section; 2. Cyclic voltammetries measurements; 3. Morphological and structural characterisation data from SEM, DRX, TEM, SAED and STEM; 4. Electrochemical characterisation data by impedance spectroscopy, figures and tables., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Sci., DOI: 10.1002/advs.202104559 Innate but not adaptive immunity regulates lung recovery from chronic exposure to graphene oxide nanosheets

  • Loret, Thomas
  • Visani de Luna, Luis Augusto
  • Fordham, Alexander
  • Arshad, Atta
  • Barr, Katharine
  • Lozano, Neus
  • Kostarelos, Kostas
  • Bussy, Cyrill
22 pages. -- Table S1. Summary of the physicochemical characterization of USGO and LGO sheets. -- Table S2. Histopathology analysis for transient immune structures in lungs. -- Table S3. Histopathology analysis for morphological changes in lungs. -- Table S4. List of antibodies used for flow cytometry. -- Table S5. List of PCR primers. -- Figure S1. Influx of immune cells in the alveolar space. -- Figure S2. Cells phenotyping strategy, total cells, immune cells and granulocytes number in the whole lung. -- Figure S3. Levels of inflammatory mediators linked to innate immunity. -- Figure S4. Macrophages and monocytes populations in the whole lung. -- Figure S5. Histopathological analysis of lungs. -- Figure S6. Lymphocyte populations in the whole lung. -- Figure S7. Levels of inflammatory mediators associated to the adaptive immunity in lungs. -- Figure S8. Dendritic cells populations in the whole lung. -- Figure S9. Gene expression of oxidative stress markers in lungs. -- Figure S10. Gene expression of tissue remodelling markers in lungs. -- Figure S11. Gene expression of apoptosis markers in lungs. -- Figure S12. Endotoxin level evaluated in BMDMs. -- Figure S13. Gating strategy to phenotype immune cells by flow cytometry. -- Figure S14. Raman spectra of USGO and LGO., The ICN2 is funded by the CERCA programme, Generalitat de Catalunya, and is supported by the Severo Ochoa Centres of Excellence programme by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information MOF-Derived Ultrathin Cobalt Molybdenum Phosphide Nanosheets for Efficient Electrochemical Overall Water Splitting

  • Wang, Xiang
  • Yang, Linlin
  • Xing, Congcong
  • Han, Xu
  • Du, Ruifeng
  • He, Ren
  • Guardia, Pablo
  • Arbiol, Jordi
  • Cabot, Andreu
8 pages. -- Figure S1. SEM images of CoMoP. -- Figure S2. (a) SEM image of Co–Mo MOFs. (b–c) SEM images and (d) EDX spectrum of CoMoP. -- Figure S3. (a) SEM image of Na2MoO4-ZIF-67. (b–c) SEM images and (d) EDX spectrum Mo–CoP. -- Figure S4. (a) SEM image of ZIF-67. (b–c) SEM images and (d) EDX spectrum CoP. -- Figure S5. (a–d) TEM image of CoMoP. -- Figure S6. (a–d) HAADF-STEM micrographs of CoMoP. -- Figure S7. EELS chemical composition maps obtained from the red squared area of the STEM mi-crograph. Individual Co L2,3-edges at 779 eV (red), Mo M4,5-edges at 230 eV (green), P L2,3-edges at 132 eV (blue), N K-edge at 401 eV (pink) and C K-edge at 284 eV (orange). -- Figure S8. (a) OER and (b) HER polarization curves of CoMoP with different Mo content in 1.0 M KOH. -- Figure S9. Cyclic voltammograms for (a) CoMoP; (b) Mo–CoP; (c) CoP and (d) RuO2 in the non-faradaic region of 1.12–1.22 V vs. RHE at various scan rates. -- Figure S10. (a–c) SEM image and d) EDX spectrum of CoMoP after long term OER stability test-ing. -- Figure S11. (a–c) SEM image and d) EDX spectrum of CoMoP after long term HER stability test-ing. -- Table S1. Comparison of OER performance of CoMoP with some previously reported CoP-based catalysts in 1.0 M KOH solution. -- Table S2. Comparison of HER performance of CoMoP with some previously reported CoP-based catalysts in 1.0 M KOH solution. -- Table S3. Comparison of OWS performance of CoMoP with some previously reported CoP-based catalysts in 1.0 M KOH solution., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material of the article Molecular Engineering to Introduce Carbonyl Between Nickel Salophen Active Sites to Enhance Electrochemical CO2 Reduction to Methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, Peng-Yi
  • Tang, Weiqiang
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi
  • Zhao, Shuangliang
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Cabot, Andreu
  • Wu, Hao Bin
  • Arbiol, Jordi
19 pages. -- Figure S1. Synthesis scheme of Ni-2D-SA. -- Figure S2. PXRD patterns of Ni-2D-SA (black) and Ni-2D-O-SA (red). -- Figure S3. FT-IR spectra of Ni-2D-SA and Ni-2D-O-SA. -- Figure S4. chemical shift of 13C SSNMR spectra of Ni-2D-SA and Ni-2D-O-SA. -- Figure S5 SEM images of: (a) Ni-2D-O-SA, (b) Ni-2D-O-SA-CNT, (c) Ni-2D-SA-CNT. -- Figure S6. (a)-(c) HAADF-STEM images of Ni-2D-O-SA displaying the presence of atomically dispersed nickel atoms. (d) HAADF-STEM image and EDS mapping. -- Figure S7. Fourier transformed Ni K-edge EXAFS spectra of Ni-SA plotted in R-space, Fourier transformed EXAFS spectra in R-space of Ni-SA and fitted curve. -- Table S1. The Ni K-edge EXAFS fitting parameters of Ni-SA. R:bond length, CN: coordination number. -- Figure S8. Fourier transformed Ni K-edge EXAFS spectra of Ni-2D-SA plotted in R-space, Fourier transformed EXAFS spectra in R-space of Ni-SA and fitted curve. -- Table S2. The Ni K-edge EXAFS fitting parameters of Ni-2D-SA. -- Table S3. The Ni K-edge EXAFS fitting parameters of Ni-2D-O-SA. -- Figure S9. Fourier transformed Ni K-edge EXAFS spectra of Ni-2D-O-SA after immersed in KHCO3 for three days plotted in R-space, Fourier transformed EXAFS spectra in R-space of Ni-SA and fitted curve. -- Table S4. The Ni K-edge EXAFS fitting parameters of Ni-2D-O-SA-KHCO3. -- Figure S10. Pore size distribution of Ni-2D-SA and Ni-2D-O-SA powder, respectively. -- Figure S11. PXRD of Ni-2D-SA-CNT, Ni-2D-O-SA-CNT and CNT. -- Figure S12. HAADF-STEM image and EDS elemental mapping for Ni-2D-O-SA-CNT. -- Figure S13. Left panel: i-t curve on Ni-2D-O-SA-CNT at -0.9 V vs. RHE for 1h Right panel: Calibration curves for methanol (0.2 mM DMSO as internal standard). -- Figure S14. NMR spectrum of the catholyte after 1 hour of CO2 reduction on Ni-2D-O-SA-CNT. -- Figure S15. (a and b) Current densities of CO2RR for Ni-2D-O-SA-CNT and Ni-2D-SA-CNT at various potentials. (c and d) Product distribution of CO2RR for Ni-2D-O-SA-CNT and Ni-2D-SA-CNT at various potentials. -- Figure S16. (a,c) CV curves on Ni-2D-O-SA-CNT and Ni-2D-SA-CNT with different scan rates (5, 10, 20, 50, 100 mV s-1). (b, d) Current at open circuit potential (OCP) versus scan rates of different samples. The electrode area is 1 cm-2. -- Figure S17. Product distribution for Ni-2D-O-SA-CNT under Ar-saturated 0.1 M KHCO3 electrolyte at various potentials. -- Figure S18. NMR spectrum of the catholyte after 1 hour of CO2 reduction on Ni-2D-O-SA-CNT. -- Figure S19. NMR spectrum of the catholyte after 1 hour of electro-reduction under Ar environment on Ni-2D-O-SA-CNT. -- Figure S21. XPS spectra of Ni-2D-O-SA-CNT on carbon paper before and after 1 and 5 hours of CO2RR test. -- Figure S22. Product distribution of CO2RR for 2D-O-SA-CNT (without nickel) at various potential. -- Figure S23. Free-energy profiles of hydrogen evolution reaction (HER) on selected segments of Ni-2D-SA and Ni-2D-O-SA, respectively. -- Figure S24. The adsorption energy for intermediates (from CO to methanol) on selected segments of Ni-2D-SA and Ni-2D-O-SA, respectively. -- Figure S25. Free energy diagram of CO2 to CH3OH on selected segments of Ni-2D-O-SA. -- Table S5. Performance comparison of our catalysts and previous reported molecular based electrocatalysts for conversion of CO2 to methanol., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material Spectroscopic and thermal characterization of extra virgin olive oil adulterated with edible oils

  • Chávez-Angel, Emigdio
  • Puertas, Belén
  • Kreuzer, Martin
  • Soliva Fortuny, Robert
  • Ng, Ryan C.
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
7 pages. -- Figure S1: Sample preparation. -- Figure S2: IR spectra second derivative and pc loading of EVOO, pomace, corn, and soy-nut oils. -- Figure S3: Photoluminescence of EVOO adulterated with different concentrations of: (a) corn, (b) soy-nut blend, (c) high oleic sunflower, (d) sunflower oils, and (e) olive-pomace oils. -- Figure S4: Normalized Raman spectra of EVOO adulterated with different concentrations of: (a) ol-ive-pomace, (b) soy-nut blend, and (c) corn oils. -- Figure S5: Normalized Raman spectra of EVOO measured directly from its package. -- Figure S6: 2DCOS map of pure EVOO. -- Table S1: Schematic representation of FTIR dataset for PCA. -- Table S2: Acid content of the studied edible oils., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Optical Mater., DOI: 10.1002/adom.202102423 Tunable Thermofluorochromic Sensors Based on Conjugated Polymers

  • Bellacanzone, Christian
  • Otaegui, Jaume R.
  • Hernando, Jordi
  • Ruiz Molina, Daniel
  • Roscini, Claudio
19 pages. -- PDF file includes: 1. Materials and methods; 1.2 Characterization methods. -- 2. Supplementary Figures. -- Figure S1. Emission spectra of the a) MEH/EC_0.01, b) MEH/HD_0.01 and c) MEH/TD_0.01 mixtures below and above Tm PCM (exc = 355 nm). -- Figure S2: Normalized absorption and F(R) spectra of a) MEH/DA_0.1, b) MEH/SA_0.1, c) MEH/NA_0.1, and d) absorption spectrum of MEH-PPV in CHCl3. -- Figure S3. Fluorescence spectra recorded for the a) MEH/DA_0.1, b) MEH/SA_0.1 and c) MEH/NA_0.1 mixtures upon several heating-cooling cycles above and below their Tm PCM (exc= 355 nm). -- Figure S4: Temperature-dependent emission spectra of the a) MEH/NA_0.1 and b) MEH/SA_0.1 mixtures registered every 10 oC under UV light (exc = 365 nm). In both cases, temperatures well below and above their respective Tm PCM were scanned. -- Figure S5. Fluorescence spectra recorded upon several heating-cooling cycles for the MEH/DA_0.01 mixture above and below its Tm PCM (exc = 355 nm). -- Figure S6: Normalized absorption and F(R) spectra of a) MEH/DA_0.01, b) MEH/SA_0.01, and c) MEH/NA_0.01. -- Figure S7. 1931 CIE chromaticity coordinates for the emission of the following PCM-MEH-PPV mixtures below and above their respective Tm PCM (exc = 355 nm): (1) MEH/DA_0.1, (2) MEH/SA_0.1, (3) MEH/NA_0.1, (4) MEH/DA_0.01, (5) MEH/SA_0.01 and (6) MEH/NA_0.01. The chromaticity coordinates for the solid and melted samples are shown in black and red, respectively. -- Figure S8. Emission spectra of MEH-PPV, MEH-4, MEH-2 and MEH-1.5 in CH2Cl2. -- Figure S9. a) Temperature-dependent emission spectra of MEH-4/DA_0.1 (exc = 355 nm). b) Fluorescence spectra recorded upon several heating-cooling cycles of MEH-4/DA_0.1 above and below its Tm PCM (exc = 355 nm). -- Figure S10. Temperature-dependent emission spectra of the a) MEH-2/DA_0. 1, b) MEH-2/DA_0.01 mixtures below and above their Tm PCM (exc = 355 nm). -- Figure S11. Normalized absorption and F(R) spectra of a) MEH-4/DA_0.1, b) MEH-4/DA_0.01, c) MEH-2/DA_0.1, d) MEH-2/DA_0.01, and e) absorption spectra of MEH-4 and MEH-2 in CHCl3. -- Figure S12. Temperature-dependent emission spectra of the a) MEH-1.5/NA_0. 1, b) MEH- 1.5/NA_0.01 mixtures below and above their Tm PCM (exc = 355 nm). -- Figure S13. Temperature-dependent pictures and emission spectra of the a) MEH-4/EC_0. 01, b) MEH-4/HD_0.01 mixtures below and above their Tm PCM (exc = 355 nm). -- Figure S14: SEM image of MEH/SA_SLMs. -- Figure S15: Temperature-dependent emission spectra of MEH/DA_SLMs. -- Figure S16: DSC of a) MEH/DA_SLMs and b) MEH/DA@PVA., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. SEV-2017-0706 funded by No. MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Mater., DOI: 10.1002/adma.202108352 Unraveling Heat Transport and Dissipation in Suspended MoSe2 from Bulk to Monolayer

  • Saleta Reig, David
  • Varghese, Sebin
  • Farris, Roberta
  • Block, Alexander
  • Mehew, Jake D.
  • Hellman, Olle
  • Woźniak, Pawel
  • Sledzinska, Marianna
  • Sachat, Alexandros el
  • Chávez-Angel, Emigdio
  • Valenzuela, Sergio O.
  • Hulst, Niek F. van
  • Ordejón, Pablo
  • Zanolli, Zeila
  • Sotomayor Torres, C. M.
  • Verstraete, Matthieu J.
  • Tielrooij, Klaas-Jan
21 pages. -- PDF file includes: 1 Simulation of Raman thermometry experiment. -- 2 Exfoliated MoSe2 flakes on PDMS and thickness determination. -- 3 Raman spectra as a function of incident laser power on suspended MoSe2 crystals. -- 4 Temperature calibrations at suspended and supported regions of MoSe2 crystals. -- 5. Thermal transport simulation. -- 6 Experimental approach: eliminating substrate-induced artifacts. -- 7 Experiment vs literature. -- 8 Phonon dispersions for different MoSe2 layers. -- 9 Theory vs literature. -- 10 Calculated temperature dependence of thermal conductivity. -- 11 Calculated in-plane thermal conductivity of MoSe2, WSe2 and MoS2. -- 12 Phonon lifetimes for monolayer and bulk MoSe2. -- 13 Cumulative spectral conductivity ratios at 300 K. -- 14 Determination of laser spot size. -- Table S1: Optical absorption, power and temperature coefficients., ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706 and Generalitat de Catalunya (CERCA program and Grant 201756R1506)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information Coloration in Supraparticles Assembled from Polyhedral MetalOrganic Framework Particles

  • Wang, Junwei
  • Liu, Yang
  • Bleyer, Gudrun
  • Goerlitzer, Eric S. A.
  • Englisch, Silvan
  • Przybilla, Thomas
  • Mbah, Chrameh Fru
  • Engel, Michael
  • Spiecker, Erdmann
  • Imaz, Inhar
  • Maspoch, Daniel
  • Vogel, Nicolas
28 pages. -- PDF file includes: Experimental Procedures; Simulation of hard polyhedral particles in spherical confinement. -- Figure S1. (a) Scheme and FESEM image of an as-synthesized C-ZIF-8 particle, highlighting the edge length (f). Scale bar: 500 nm. (b) Left: Representative FE-SEM image of C-ZIF-8 particles. Scale bar: 1 μm. Middle: Size-distribution histogram of as-synthesized C-ZIF-8 particles with a mean f of 191 ± 9 nm. Right: PXRD patterns of simulated (black) and as-synthesized C-ZIF-8 particles (red). -- Figure S2. (a) Scheme and FESEM image of an as-synthesized TRD-ZIF-8 particle, highlighting the particle size (f) and edge length (x). Scale bar: 500 nm. (b-e) TRD ZIF-8 particles (t= 0.68) with a mean f of 181 ± 9 nm (b), 198 ± 10 nm (c), 229 ± 9 nm (d) and 247 ± 10 nm (e). Left: Representative FE-SEM images; Middle: Size-distribution histograms; and Right: PXRD patterns of simulated (black) and assynthesized TRD-ZIF-8 particles (red). -- Figure S3. (a) Scheme and FESEM image of an as-synthesized RD-ZIF-8 particle, highlighting the particle size (f). Scale bar: 500 nm. (b-e) RD ZIF-8 particles with a mean f of 246 ± 12 nm (b), 267 ±12 nm (c), and 293 ± 13 nm (d). Left: Representative FE-SEM images; Middle: Size-distribution histograms; and Right: PXRD patterns of simulated (black) and as-synthesized RD-ZIF-8 particles (red). -- Figure S4. (a) Scheme and FESEM image of an as-synthesized O-UiO-66 particle, highlighting the edge length of particles (f). Scale bar: 500 nm. O-UiO-66 particles a mean f of 194 ± 12 nm (b), 238 ± 13 nm (c), and 247 ± 13 nm (d). Left: Representative FE-SEM images; Middle: Size-distribution histograms; and Right: PXRD patterns of simulated (black) and as-synthesized RD-ZIF-8 particles (red). -- Figure S5. Representative FESEM images of polydisperse C-ZIF-8 (a) and O-UiO-66 (b) supraparticles prepared by shaking emulsifying, with a size of 21 ± 5.6 μm (26% polydispersity) and 9.9 ± 3.4 μm (34% polydispersity, approximately 500 counts), respectively. -- Figure S6. Representative FESEM images of monodispersed RD-ZIF-8 (a) and TRD-ZIF-8 (b) supraparticles prepared using a droplet-based microfluidic device, with a size of 20.1 ± 0.6 μm (3% polydispersity) and 10.4 ± 0.5 μm (5% polydispersity, approximately 200 counts), respectively. -- Figure S7. Transmissive X-ray image of MOF supraparticles of a) RD-ZIF-8, showing few onion-like layers near the surface; b) TRD-ZIF-8, showing thick onion-like layers, as well as some lattice fringes; c) C-ZIF-8, showing thick onion-like layers, as well as some lattice fringes; and d) O-UiO-66 particles, showing only little onion-like layer structures. -- Figure S8. Cross-section of RD-ZIF-8 supraparticles revealed by focused-ion beam milling. -- Figure S9. Cross-section of TRD-ZIF-8 supraparticles revealed by focused-ion beam milling. -- Figure S10. Cross-section of C-ZIF-8 supraparticles revealed by focused-ion beam milling. -- Figure S11. Cross-section of O-UiO-66 supraparticles revealed by focused-ion beam milling. -- Figure S12. A TRD-ZIF-8 supraparticle exhibiting local five-fold symmetric surface pattern, marked with blue colour. -- Figure S13. Cross-sectional images of simulated supraparticles of hard polyhedra in spherical confinement. -- Figure S14. Photograph of the self-assembled superstructures resulting from the centrifugation of different aqueous colloidal MOF particles (from left to right: RD-ZIF-8, TRD-ZIF-8, C-ZIF-8 and OUiO-66). -- Figure S15. Relationship between MOF particle size of different shapes and layer distance. -- Figure S16. Optical setup to measure reflectance spectra directly from MOF supraparticles suspended in liquid in a glass vial. -- Figure S17. Angle-dependent reflection spectra of four types of MOF supraparticles measured directly from liquid suspension. -- Figure S18. Shift of the reflectance peak with increasing viewing angle for four types of MOF supraparticles. -- Figure S19. Buckled RD-ZIF-8 supraparticles. 1.0 mL 1 wt% Lutensol TO8 surfactant is added to 0.5 mL 2 wt% RD-ZIF-8 particle dispersion. -- Figure S20. Angle-dependent reflection spectra of buckled MOF supraparticles measured directly from suspension. -- Figure S21. Hypothesized surface grating effects of MOF supraparticles. -- Figure S22. Buckled RD-ZIF-8 supraparticles exhibit ordered surface features, visualized in scanning electron microscopy. -- Figure S23. The surface packing of RD ZIF-8 supraparticles shows a sawtooth groove profile, as seen in scanning electron microscopy., ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Small, DOI: 10.1002/smll.202106762 Crossover From Individual to Collective Magnetism in Dense Nanoparticle Systems: Local Anisotropy Versus Dipolar Interactions

  • Sánchez, Elena H.
  • Vasilakaki, Marianna
  • Lee, Su Seong
  • Normile, Peter S.
  • Andersson, Mikael S.
  • Mathieu, Roland
  • López-Ortega, Alberto
  • Pichon, Benoit P.
  • Peddis, Davide
  • Binns, Chris
  • Nordblad, Per
  • Trohidou, Kalliopi N.
  • Nogués, Josep
  • Toro, José A. de
13 pages. -- Figure S1. HAADF-STEM image and two-dimensional EELS mapping of Fe-L2,3 signal and Co-L2,3 signal from several 19% Co-doped particles. -- Fig. S2. Thermogravimetric (TGA) curves used to find the oleic acid content (weight percentage) bound to the maghemite particles (6.9 nm in diameter) before and after washing them repeatedly in acetone. -- Figure S3. Temperature derivative of the difference between the field-cooled (FC) and zerofield-cooled (ZFC) magnetization curves, -d(MFC-MZFC)/dT. -- Fig. S4. FC rise above the ZFC peak, defined as [Mplateau - MZFC(TMAX)]/MZFC(TMAX), as a function of Co-doping (thus particle anisotropy) and packing fraction (controlled by the coatings, or lack of coating, indicated by the legend). The data was extracted from Figure 2 in the main text. -- Figure S5. Dependence on the Co-doping fraction (fCo) of the exchange bias field (HE) measured at 5 K for the three series of particles with different coatings. -- Figure S6. Evolution of the saturation magnetization (MS) as a function of the Co-doping fraction. The dashed line is a guide to the eye. -- Figure S7. Temperature dependence of the in-phase component of the ac magnetic susceptibility (χ’) at the indicated frequencies. -- Figure S8. Temperature dependence of the out-of-phase component of the ac magnetic susceptibility (χ’’) at the indicated frequencies. The amplitude of the temperature range is the same in the four panels. -- Figure S9. Linear representation of fits of the relaxation time to the critical slowing down (a), and evolution of the total frequency shift of the in-phase ac susceptibility with the Co fraction. -- Table S1. Results from the fit of the temperature dependence of the relaxation time (as extracted from AC susceptibility curves) to the critical slowing down law (Equation S1) using an Arrhenius temperature dependence of the prefactor 𝜏𝜏∗, with 𝜏𝜏0=10-13 s (see justification in text), and the anisotropy barriers extracted from the ZFC-FC curves of the corresponding dilute systems. -- Other informations., CN2 is funded by the CERCA program/Generalitat de Catalunya and supported by SEV-2017-0706 grant funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information pH-Triggered Removal of Nitrogenous Organic Micropollutants from Water by Using Metal-Organic Polyhedra

  • Hernández-López, Laura
  • Cortés Martínez, Alba
  • Parella, Teodor
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
85 pages. -- PDF file contents: S1. Materials and experimental methods; S1.1. Material; S1.2. Experimental methods; S1.2.1. Synthesis of COOHRhMOP/COONaRhMOP; S1.2.2. pH-triggered pollutant removal methodology; S2. COOHRhMOP viability for pollutant removal; S2.1. Precipitation tests; S3. Coordination tests of benzotriazole and optimization of the pollutant removal cycle; S3.1. Coordination tests; S3.2. Benzotriazole quantification. Calibration curve; S3.3. Removal efficiency calculation. General methodology; S3.4. Blank experiments; S3.5 Optimization of the precipitation pH; S3.6 Interaction pH; S3.7 Impact of pollutant diffusion constrains on the removal efficiency; S3.7.1 Time-dependent uptake tests in homogeneous conditions; 3.7.2 Time-dependent uptake tests in heterogeneous conditionsS3.8 Removal performance at different concentrations. Uptake curve; S3.9 Regeneration and reusability of COONaRhMOP; S3.10 Stability test; S3.11 Implementation of filtration to the pH-triggered pollutant removal methodology; S3.12 Removal of benzotriazole from tap water; S.4. Expanding the scope. Removal of pollutants containing pH-sensitive coordinating groups; S.4.1 Optimization of the precipitation pH; S.4.2. Benzothiazole removal; S.4.2.1. Benzothiazole coordination test; S.4.2.2. Benzothiazole quantification. Calibration curve; S.4.2.3. Blank experiment; S.4.2.4. Removal performance at different concentrations. Uptake curve; S.4.2.5. Regeneration and reusability of COONaRhMOP; S.4.2.6. Stability test; S.4.3. Naphthylamine removal; S.4.3.1. Naphthylamine coordination test; S.4.3.2. Naphthylamine quantification. Calibration curve; S.4.3.3. Blank experiment; S.4.3.4. Removal performance at different concentrations. Uptake curve; S.4.3.5. Regeneration and reusability of COONaRhMOP; S.4.3.6. Stability test; S.4.4. Isoquinoline removal; S.4.4.1. Isoquinoline coordination test; S.4.3.2. Isoquinoline quantification. Calibration curve; S.4.4.3. Blank experiment; S.4.4.4. Removal performance at different concentrations. Uptake curve; S.4.4.5. Regeneration and reusability of COONaRhMOP; S.4.4.6. Stability test; S.5. Simultaneous removal of multiple nitrogenous organic micropollutants from an aqueous solution; S.5.1. Coordination test; S.5.2. Removal performance; S.5.3; Regeneration of COONaMOP; S.5.4. Stability test., ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information of the article Tailoring of the photocatalytic activity of CeO2 nanoparticles by the presence of plasmonic Ag nanoparticles

  • Zhao, Shuang
  • Riedel, Marc
  • Patarroyo, Javier
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Yue, Zhao
  • Lisdat, Fred
  • Parak, Wolfgang J.
14 pages. -- PDF file contents figures and additional information: Additional nanoparticle characterization. -- Surface coverage of nanoparticles on gold electrodes. -- Additional photocurrent measurements. -- Numbers for the sketch of the band levels., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary materials Rational design of MXene/Activated carbon/Polyoxometalates triple hybrid electrodes with enhanced capacitance for organic-electrolyte supercapacitors

  • Zhu, Jun-Jie
  • Hemesh, Avireddy
  • Jacas Biendicho, Jordi
  • Martínez-Soria, Luis
  • Rueda-García, Daniel
  • Morante, Joan Ramón
  • Ballesteros, Belén
  • Gómez-Romero, P.
17 pages. -- File includes supplementary data: Synthesis of MXene/AC; In-situ growth MXene/TEAPW12 Delamination of MXene with TEAOH; Synthesis of MXene/TEAPW12; Preparation of activated carbon electrode for asymmetric capacitors; Charge balance of the asymmetric capacitors. -- Figures and tables., ICN2 and IREC are funded by the CERCA programme / Generalitat de Catalunya, and ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Funct. Mater., DOI: 10.1002/adfm.202111446 Site-Specific Axial Oxygen Coordinated FeN4 Active Sites for Highly Selective Electroreduction of Carbon Dioxide

  • Zhang, Ting
  • Han, Xu
  • Biset-Peiró, Martí
  • Li, Jian
  • Zhang, Xuan
  • Tang, Peng-Yi
  • Yang, Bo
  • Zheng, Lirong
  • Morante, Javier
  • Arbiol, Jordi
26 pages. -- PDF file includes: Materials and methods; XAFS Measurements; XAFS Analysis and Results; Synthesis Methods: Preparation of IRMOF-3; Preparation of ZIF-8; Preparation of Fe-IRMOF-3 and Fe-ZIF-8; Preparation of Disperse Fe-N-C (denoted as O-Fe-N-C and Fe-N-C); Preparation of O-Fe-N-C-Acid; Ink Preparation; Electrochemical Measurement; Calculation Method; DFT Calculations. -- Figures and tables., ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327.ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Sci., DOI: 10.1002/advs.202104643 Ultra-Large Free-Standing Imine-based Covalent Organic Framework Membranes Fabricated via Compression

  • Martín-Illán, Jesús Á.
  • Suárez, José Antonio
  • Gómez-Herrero, Julio
  • Ares, Pablo
  • Gallego-Fuente, Daniel
  • Cheng, Youdong
  • Zhao, Dan
  • Maspoch, Daniel
  • Zamora, Félix
26 pages. -- Figure S1. PXRD patterns of TAPB-BTCA-MCOFs at different pressures in perpendicular mode. -- Figure S2. Photographs highlighting the flexible COF-membrane. --Table S1. Experimental elemental analysis data of COF aerogels (AG) and COFmembranes (M). -- Table S2. Physical features of the COF aerogels and membranes. -- Figure S3. ATR-FT-IR spectra of TAPB-BTCA-AGCOF (blue-line) and TAPB-BTCAMCOF (green-line). -- Figure S4. ATR-FT-IR spectra of PPDA-BTCA-AGCOF (blue-line) and PPDA-BTCAMCOF (green-line). -- Figure S5. ATR-FT-IR spectra of TAPB-PDA-AGCOF (blue-line) and TAPB-PDAMCOF (green-line). -- Figure S6. Solid state 13C NMR spectrum of TAPB-BTCA-MCOF. -- Table S3. Peaks assignment of solid state 13C NMR spectrum of TAPB-BTCA-MCOF. -- Figure S7. Solid-state 13C CP-MAS NMR spectrum of PPDA-BTCA-MCOF. -- Table S4. Peaks assignment of solid state 13C NMR spectrum of PPDA-BTCA-MCOF. - Figure S8. Solid-state 13C CP-MAS NMR spectrum for TAPB-PDA-MCOF. -- Table S5. Peaks assignment of solid state 13C NMR spectrum of TAPB-PDA-MCOF. -- Figure S9. TGA traced for TAPB-BTCA-AGCOF (black) and TAPB-BTCA-MCOF (red). 16 % volatile elements. -- Figure S10. TGA traced for PPDA-BTCA-AGCOF (black) and PPDA-BTCA-MCOF (red). 14 % volatile elements. -- Figure S11. TGA traced for TAPB-PDA-AGCOF (black) and TAPB-PDA-MCOF (red). 9 % volatile elements. -- Figure S12. PXRD patterns of (A) TAPB-BTCA-MCOF, (B) PPDA-BTCA-MCOF and (C) TAPB-PDA-MCOF before (blue) and after treatment with toluene (red), hexane (dark-yellow), dimethylformamide (black), 14 м NaOH (dark cyan) and 12 м HCl (green). -- Figure S13. AFM Topography images of TAPB-BTCA-MCOF (A-D), PPDA-BTCAMCOF (B-E) and TAPB-PDA-MCOF (C-F) membranes. A, B and C without AcOH and D, E and F with AcOH. -- Figure S14. Histograms showing Young’s modulus distribution of the membranes with AcOH. -- Figure S15. Histograms showing Young’s modulus distribution of the membranes without AcOH. -- Figure S16. (A, B, C) Representative Young’s modulus maps of the TAPB-BTCA-MCOF, PPDA-BTCA-MCOF and TAPB-PDA-MCOF membranes respectively, and the corresponding AFM topographical images of the same areas (D, E, F). -- Figure S17. N2 adsorption–desorption isotherm of TAPB-BTCA-AGCOF (black line) and TAPB-BTCA-MCOF (red line). -- Figure S18. N2 adsorption–desorption isotherms of PPDA-BTCA-AGCOF (black line) and PPDA-BTCA-MCOF (red line). -- Figure S19. N2 adsorption–desorption isotherms of TAPB-PDA-AGCOF (black line) and TAPB-PDA-MCOF (red line). -- Table S6. BET surface area values for COF-aerogels (AG) and COF-membranes (M). -- Figure S20. Cumulative and pore size-distribution of TAPB-BTCA-MCOF. -- Figure S21. Cumulative and pore size-distribution of PPDA-BTCA-MCOF. -- Figure S22. Cumulative and pore size-distribution of TAPB-PDA-MCOF. -- Figure S23. CO2 uptake capacity isotherms of TAPB-BTCA-AGCOF (black line) and TAPB-BTCA-MCOF (red line). -- Figure S24. CO2 uptake capacity isotherms of PPDA-BTCA-AGCOF (black line) and PPDA-BTCA-MCOF (red line). -- Figure S25. CO2 uptake capacity isotherms of TAPB-PDA-AGCOF (black line) and TAPB-PDA-MCOF (red line). -- Figure S26. CH4 uptake capacity isotherms of TAPB-BTCA-AGCOF (black line) and TAPB-BTCA-MCOF (red line). -- Figure S27. CH4 uptake capacity isotherms of PPDA-BTCA-AGCOF (black line) and PPDA-BTCA-MCOF (red line). -- Figure S28. CH4 uptake capacity isotherms of TAPB-PDA-AGCOF (black line) and TAPB-PDA-MCOF (red line). -- Figure S29. Summary of CO2 adsorption capacities reported for different COFs at 273 K, the best performance MOF (Mg2(dodbc) at 298 K and zeolite ([Na10.2KCs0.8]-LTA at 1 bar. -- Figure S30. Summary of CH4 adsorption capacities for the best 2D-COF at low pressure (1 bar). -- Table S7. Summary of the uptake values for the COF-aerogels (AG) and COF-membranes (M). -- Figure S31. Study of the gas permeability and separation selectivity at different transmembrane pressures for (A) CO2/CH4 and (B) CO2/N2 in TAPB-BTCA-MCOF. -- Figure S32. Study of the gas permeability and separation selectivity under different temperatures for (A) CO2/CH4 and (B) CO2/N2 in TAPB-BTCA-MCOF. -- Figure S33. Evaluation of the long-term stability of TAPB-BTCA-MCOF for the separation of CO2/CH4 mixtures. -- Table S8. CO2/N2 upper bound of commercial membranes and membranes made of MOFs, zeolites, porous organic polymers and COFs. -- Table S9. CO2/CH4 upper bound of commercial membranes and membranes made of MOFs, zeolites, porous organic polymers and COFs. -- Table S10. Summary of the performance of COF-membranes for CO2/CH4 and CO2/N2 separation, ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Adv. Mater., DOI: 10.1002/adma.202108835 A High Conductivity 1D π–d Conjugated Metal–Organic Framework with Efficient Polysulfide Trapping-DiffusionCatalysis in Lithium–Sulfur Batteries

  • Yang, Dawei
  • Liang, Zhifu
  • Tang, Peng-Yi
  • Zhang, Chaoqi
  • Tang, Mingxue
  • Li, Qizhen
  • Jacas Biendicho, Jordi
  • Li, Junshan
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Xu, Ming
  • Llorca, Jordi
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Chou, Shu-Lei
  • Cabot, Andreu
22 pages. -- PDF file includes: Experimental Procedures; DFT calculations. -- Figure S1. (a,b) SEM image and EDX spectrum of Ni-MOF-1D sample. (c) High magnification STEM-HAADF image and EDX elemental mapping showing the elemental distribution in a Ni-MOF-1D sample. (d) XRD pattern of Ni-MOF-1D. -- Figure S2. High magnification HAADF-STEM images and detailed STEM-EDX elemental maps of a Ni-MOF 1D catalyst. -- Figure S3. iDPC-STEM images of Ni-MOF-1D with different magnifications. -- Figure S4. (a) XPS survey spectrum of Ni-MOF-1D. (b-d) High resolution XPS spectra of b) C 1s, c) N 1s, and d) Ni 2p. -- Table S1 Detailed EXAFS fitting model and parameters of Ni-MOF-1D. -- Figure S5. Wavelet transform (WT) analysis of (a) Ni-MOF-1D, (b) Ni foil, and (c) NiO. -- Figure S6. 1H NMR spectra of the obtained sample of Ni-MOF-1D. -- Figure S7. (a) Projected integral of the charge density in the non-periodic direction. (b) Projected integral of the charge density in the periodic direction of Ni-MOF-1D. -- Figure S8. Calculated electron localization function (ELF) of Ni-MOF-1D. -- Figure S9. (a) SEM-EDX compositional maps and (b) EDX spectra of S@Ni-MOF-1D. (c) XRD pattern of S@Ni-MOF-1D. (d) TGA profile from S@Ni-MOF-1D measured in N2 atmosphere. (e) N2 adsorption-desorption isotherms of Ni-MOF-1D and S@Ni-MOF-1D. Inset: Pore size distribution of Ni-MOF-1D and S@Ni-MOF-1D. -- Figure S10. Electrical conductivity of the two hosts tested before and after fusion with sulfur. -- Figure S11. Binding energies and adsorbed structures of LiPS on the surface of carbon calculated by DFT. -- Figure S12. Binding energies and adsorbed structures of LiPS on the surface of Ni-MOF-1D calculated by DFT. -- Figure S13. The optimized adsorption configuration of Li2S decomposition on carbon. -- Figure S14. The optimized adsorption configuration of Li2S decomposition on Ni-MOF-1D. -- Figure S15. (a) CV curve of Ni-MOF-1D as electrode measured in symmetric coin cell configuration using an electrolyte containing 1 mol L−1 LiTFSI dissolved in DOL/DME (v/v =1/1). (b) CV curves of symmetric cells from 1 to 50 cycles. (c) CV profiles of Ni-MOF-1D electrodes in symmetric cells at scan rate from 2 mV s-1 to 20 mV s-1. -- Figure S16. EIS spectra of symmetrical cells with different host materials, Ni-MOF-1D (a) and Super P (b), using an electrolyte containing 0.5 mol L-1 Li2S 6 and 1 mol L-1 LiTFSI dissolved in DOL/DME (v/v = 1/1). -- Figure S17. Onset potential for Li–S redox reactions. -- Figure S18. CV curves of S@Super P at different scan rates. -- Figure S19. First four cycles of CV curves of (a) S@Ni-MOF-1D, and (b) S@Super P performed at a scan rate of 0.1 mV s−1. -- Figure S20. Plots of CV peak current. -- Figure S21. Charge profiles of S@Ni-MOF-1D, and S@Super P electrodes showing the overpotentials for conversion between soluble LiPS and insoluble Li2S2/Li2S. --Figure S22. (a) Galvanostatic charge/discharge profiles of S@Super P electrodes at different current densities range from 0.1 C to 3 C. (b) EIS spectra of S@Super P coin cells before and after cycling. -- Figure S23. High-loading cycling performances with sulfur loadings of 7.6 mg cm-2 at 0.5 C of S@Ni-MOF-1D electrodes. -- Figure S24. (a) Galvanostatic charge/discharge profiles of S@Ni-MOF-1D at various current rates with a high sulfur loading of 4.3 mg cm−2. (b) Rate capability of S@Ni-MOF-1D cathodes loaded with 4.3 mg cm−2 of sulfur at various C rates. -- Figure S25. (a) TGA curve of a S@Ni-MOF-1D composite with a higher sulfur loading. (b) Cycling stability and Coulombic efficiency of the S@Ni-MOF-1D cathode with a higher sulfur loading at 1 C for 250 cycles. -- Table S2 Summary of recent reports on MOF-based sulfur host cathodes for LSBs., ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed