Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Green hydrogen production through low temperature thermochemical water splitting cycles based on non-ordered and ordered macroscopic structures of La0.6Sr0.4Co0.2Fe0.8O3±δ perovskite

  • Linares, María
  • Orfila, María
  • Pérez Domínguez, Alejandro
  • Díaz-Correas, Elisa
  • Zabukovec Logar, Natasa
  • Sanz Martin, Raul
  • Marugan, Javier
  • Molina, Raul
  • Botas, Juan Ángel
The production of green hydrogen is one of the main targets of current energy and environmental policies. In this context, thermochemical water splitting is one of the potential methodologies that enable its production. This process is based on the thermal reduction of a metal oxide, followed by its re-oxidation with water releasing hydrogen. The main problem of this process, which hinders its full-scale application, is that reducing the metal oxide usually requires very high temperatures (>1500 °C). To decrease this reduction temperature, nonstoichiometric oxides such as perovskites have been proposed. In a previous work, the authors have presented La1-xSrxMeO3±δ (x = 0.2–0.4; Me = Mn, Fe and Co) perovskites as active materials decreasing the operation temperature to 1400 °C. However, those perovskites showed a significant lack of stability upon cycling, limiting their use in a future scale-up of the process. In this work, we present a multi-substituted perovskite type A1-xA’xB1-yB’yO3±δ (La0.6Sr0.4Co0.2Fe0.8O3±δ, named LSCF) as redox material with increasing stability and remarkable activity in the hydrogen production cycles even at temperatures below 1000 °C. This material was synthesised by reactive grinding as a green synthesis method optimising the variables of the process. Three reduction temperatures for the thermochemical water splitting were evaluated in the range 800–1200 °C at the same oxidation temperature of 800 °C. LSCF perovskite has been used in powder form with a H2 production of 5.22 cm3STP/gmaterial⋅cycle when the reduction was performed at 800 °C and 6.83 cm3STP/gmaterial⋅cycle when this reduction step was performed at 1000 °C. Afterwards, the LSCF was shaped into two different macroporous structures looking for a potential scaling-up of the process: reticulated porous ceramic structure (RPC) and a ceramic monolith structure with straight and well-ordered channels in which the perovskite forms a thin layer over the internal channels surface. The macroscopic structures exhibited good activity and stability working isothermally at 800 °C under N2 atmosphere, reaching H2 productions higher than 10 cm3STP/gmaterial⋅cycle. Particularly, the monolithic structure, characterised by its open macroporosity improves the heat transfer phenomena and the contact between the gas-phase and the perovskite, obtaining a stable hydrogen production under isothermal conditions of 17 cm3STP/gmaterial⋅cycle at 800 °C. That could be increased up to 32.5 cm3STP/gmaterial⋅cycle when the reduction step of the thermochemical water splitting is performed at 1000 °C. To the best of our knowledge, this is the higher value obtained for hydrogen production by a perovskite in this application at this reaction conditions. These results confirm the LSCF as a potential material for green hydrogen production by low-temperature thermochemical cycles.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Macroscopic structures based on La0.8Me0.2NiO3±δ (Me = Al, Ba and Ca) perovskites for renewable hydrogen production through thermochemical water splitting

  • Pérez Domínguez, Alejandro
  • Orfila, María
  • Linares, María
  • Sanz Martin, Raul
  • Marugan, Javier
  • Molina, Raul
  • Botas, Juan Ángel
The worrying energy and climate situations make it necessary to face a transition to a carbon-neutral economy. In this context, green hydrogen plays a crucial role in the future energy landscape. Besides other technologies, thermochemical water splitting represents a promising route for renewable hydrogen generation, using thermosolar energy as the primary energy source. In this study, different types of perovskites La0.8Me0.2NiO3±δ (Me = Al, Ba and Ca) were synthesised via reactive grinding. Their redox performance was evaluated under different thermal reduction temperatures (1200-800 °C), obtaining materials with hydrogen production values ranging from 4.51 to 5.31 cm3STP/gmaterial·cycle when the reduction was performed at 800 °C, exceeding those already reported values for similar materials at higher temperatures. In order to obtain suitable configurations for their implementation in solar reactors, powdered perovskites were shaped into macrostructures such as pellets, reticulated porous ceramic (RPC) structures and thin films deposited over ceramic monoliths. Compared to powdered materials, the macrostructures exhibited higher hydrogen production attributed to enhanced gas-solid contact and more efficient heat transfer within the structures. The best performance was obtained by La0.8Ca0.2NiO3±δ supported as a thin layer over the ceramic monolithic structure, with productions up to 14.91–16.33 cm3STP/gmaterial·cycle using thermal reduction temperatures of 800 and 1000 °C, respectively. These results confirm that shaping strategies enhance the already remarkable redox activity of perovskites and enable their integration into volumetric solar reactors. This represents a significant step forward in the development of scalable green hydrogen production systems based on renewable solar thermal energy.