Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Lubricants impact on cutting forces : Torque reduction in tapping process, Estudio sobre el impacto de los lubricantes en las fuerzas de corte - Reducción del par de fuerza en un proceso de roscado

  • Mangiaterra Beltrame, Marco
[ES] Los procesos de mecanizado representan una parte importante de los procesos que se llevan a cabo en la industria manufacturera. Con el fin de reducir el impacto ecológico y los costos operativos, estas empresas se han de volcarse a la mejora continua de sus procesos. Esta tesis tiene como objetivo la mejora de un proceso de brochado para una empresa automotriz. Esta herramienta está construida en HSS y revestida con TiN, forzándose a través de un orificio en la pieza a mecanizar. Debido a los múltiples puntos de corte que actúan simultáneamente, las fuerzas necesarias son muy elevadas. Los bajos valores del ángulo de alivio y la baja velocidad del proceso, conceden al lubricante un papel crítico en el proceso de brochado. Con el fin de estudiar el impacto del lubricante en el proceso de brochado se han simulado las condiciones de este proceso de la forma más fiel posible en un laboratorio mediante un proceso de roscado. Con la finalidad de examinar las fuerzas de corte necesarias y como estas evolucionaban a lo largo del proceso se ha llevado a cabo esta operación mediante el uso de diferentes lubricantes. Los resultados y su análisis han mostrado una influencia de la viscosidad en el proceso. La viscosidad es inversamente proporcional a la capacidad del fluido de acceder a ciertas zonas críticas, aumentando las fuerzas de rozamiento y la generación de virutas largas. Tanto el tamaño de la viruta, como la capacidad del lubricante de evacuarlas han mostrado fuertes influencias en el proceso., [EN] Machining processes are an important part of the manufacturing industry. Those companies are required to continuously improve their processes and make them more efficient, to reduce the ecological impact and operational costs. The aim of this thesis is to improve a circular broaching process for an automotive company. The broaching tool is made from solid HSS and TiN coated, which is pulled through a hole in the workpiece. Due to multiple cutting edges acting simultaneously, the cutting force is high. With a low relief angle of the cutting tool and low cutting speed, the lubricant plays a critical role in the broaching process. The thesis studies different cutting fluids in a laboratory, by simulating the impact of cutting fluids in a broaching process with tapping operations under similar conditions. The torques values and the behaviour of it during the process have been recorded for different lubricants. The lubricants were found to have a strong influence in the torque required and the chip formation. The relation between lubricant viscosity and lubrication performance was studied. In addition, the relation between chip formation and torque behaviour was explored, showing the importance of chip evacuation capacity. The process has been carried out by using different lubricants to examine the required cutting forces and how they evolved throughout the process. The results and the consecutive analysis have shown an influence of the viscosity in the process. The viscosity is inversely proportional to the capacity of the fluid to access certain critical areas, increasing the friction forces and the generation of long chips. Both the chip size and the ability of the lubricant to evacuate have strong influences on the process., The author wants to show gratitude with Scania AB and Binol AB for the material support for this project. The project was supported by Vinnova Project 2016-02506 Testbed for future process cutting fluid in sustainable production, and the experiments were supported by the XPRES (Excellence in production research) LAB in KTH funded by Vinnova.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Estudio de la importancia de un modelo de turbogrupos integral para la simulación de la operación en transitorio de carga de los motores Diesel turbo-sobrealimentados

  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
[ES] Los motores de combustión turbosobrealimentados son los principales propulsores de los vehículos actuales. Continuar estudiando el acoplamiento entre el turbogrupo y el motor alternativo es fundamental para mejorar su eficiencia y reducir las emisiones contaminates de los mismos. En este TFM se analiza la importancia de usar modelos integrales (holísticos) del turbogrupo. Por modelo integral se entiende aquel que aborda tres aspectos: Eficiencia aerodinámica de las turbomáquinas, pérdidas mecánicas del eje del turbogrupo y fenómenos de transmisión de calor en el turbogrupo. En la actualidad no existen modelos comerciales que aborden los tres aspectos de manera combinada, lo que dificulta enormemente el modelado numérico con precisión de los motores turbo-sobrealimentados. En el TFM se analiza las ventajas de usar este tipo de modelos frente a la práctica standard con el foco en la buena predicción de la contrapresión de escape del motor y la temperatura del aire y los gases de escape a la salida de las turbomáquinas. Este análisis se hace para un motor Diesel con EGR de baja presión y tanto para funcionamiento estacionario como transitorio. Una parte importante del trabajo ha consistido en proponer un protocolo de calibración de los modelos 1D para este tipo de motores. Además se proponen nuevos submodelos para abordar los procesos de transmisión de calor en turbogrupos con características innovadoras como son los compresores con voluta refrigerada y los e-chargers (turbocompresores eléctricos)., [EN] Turbocharged combustion engines are the main engines of current vehicles. Continuing to study the coupling between the turbogroup and the alternative engine is fundamental to improve its efficiency and reduce pollutant emissions from them. In this TFM the importance of using integral (holistic) models of the turbogroup is analyzed. Integral model refers to one that addresses three aspects: aerodynamic efficiency of turbomachinery, mechanical losses of the turbogroup axis and heat transfer phenomena in the turbogroup. At present there are no commercial models that address all three aspects in a combined manner, which makes it extremely difficult to numerically model the turbo-supercharged engines with precision. In the TFM, the advantages of using this type of models in comparison with the standard practice are analyzed with the focus on the good prediction of the exhaust back pressure of the engine and the temperature of the air and the exhaust gases at the exit of the turbomachines. This analysis is made for a diesel engine with low pressure EGR and for both stationary and transient operation. An important part of the work has been to propose a calibration protocol for the 1D models for this type of engine. In addition, new submodels are proposed to address heat transfer processes in turbogroups with innovative features such as compressors with refrigerated volute and e-chargers (electric turbochargers), This work was partially funded by FEDER and Government of Spain through Project TRA2016-79185-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Análisis comparado de las emisiones de los motores E4 en altura

  • Tabet Aleixandre, Roberto
[ES] El funcionamiento de los motores de combustión en altura no ha sido tradicionalmente bien estudiado desde el punto de vista del análisis de sus emisiones. La posibilidad de disponer de un simulador de altura en laboratorios a cualquier cota permite realizar estos estudios en detalle. En el presente TFM se ha usado un simulador de altura comercialmente conocido como MEDAS (multifunctional efficient and dynamic altitude simulator) y desarrolado en el I.U. CMT-Motores Térmicos para su comercialización por la multinacional Horiba. MEDAS se ha validado previamente en una cámara altimétrica comparando los resultados de emisiones en estacionario de un motor comercial con la cámara altimétrica y con el simulador de altura (MEDAS). A continuación, se ha hecho un estudio usando el ciclo transitorio WLTC (World Harmonized Light Duty Transient Cycle) para comparar la emisiones de un motor E4 en altura con las que establece la norma actual de los motores Diesel E6d. Se ha concluido que el reemplazo de los motores E4 por E6d supondría una disminución importante de las emisiones contaminantes. En el análisis se ha discriminado entre la operación a nivel del mar en un tráfico como el de Barcelona y la operación en altura en una ciudad como Madrid. También se han analizado las operaciones a 2000m y 3000m de altura, que aunque no hay centros de población importantes a esas alturas en Europa, sí los hay en otras areas geográficas como Sudamerica o Asia., [EN] The operation of combustion engines in height has not traditionally been well studied from the point of view of the analysis of their emissions. The possibility of having a height simulator in laboratories at any altitude level allows these studies to be carried out in detail. In the present TFM, a height simulator commercially known as MEDAS (multifunctional efficient and dynamic altitude simulator) has been used and developed in the I.U. CMT-Motores Térmicos for its commercialisation by the multinational Horiba. MEDAS has been previously validated in a hypobaric chamber comparing the results of stationary emissions of a commercial engine with the altimeter camera and with the height simulator (MEDAS). Next, a study has been made using the transient cycle WLTC (World Harmonised Light Duty Transient Cycle) to compare the emissions of an E4 engine in height with those established by the current standard of the E6d Diesel engines. It has been concluded that the replacement of the E4 engines by E6d would imply a significant reduction of the polluting emissions. The analysis has discriminated between the operation at sea level in a traffic like at Barcelona and the operation at height in a city like Madrid. The operations at 2000m and 3000m have also been analysed, although there are no important population areas at this heights in Europe, although there are other geographical areas such as South America or Asia., This work was partially funded by FEDER and Government of Spain through Project TRA2016-79185-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Selección y validación de la colección nuclear de variedades tradicionales españolas de Trigo blando

  • Fernández González, Mario
[ES] Uno de los objetivos más importantes de la mejora del siglo XXI es el desarrollo de cultivares que permitan mantener los rendimientos actuales en un escenario climático variable. En este contexto, las variedades tradicionales españolas presentan un gran potencial como fuente de caracteres adaptativos debido a la diversidad agroclimática presente en España. La colección más numerosa y antigua de variedades tradicionales españolas de trigo se conserva en el Centro Nacional de Recursos Fitogenéticos (CRF) del INIA. La colección activa está formada por 3.722 accesiones, de las que 1.551 son variedades españolas. De éstas, 767 son variedades tradicionales españolas de trigo blando (Triticum aestivum (L.) ssp. aestivum). Estas accesiones presentan una amplia variabilidad genética y resultan de gran interés en investigación y mejora. El manejo y utilización de una colección con un alto número de accesiones, en la que además existen algunos duplicados, es difícil debido al volumen de material que se debe analizar y el espacio y recursos que consume. Como forma de facilitar el acceso a la variabilidad existente e incentivar su uso en mejora, se crean colecciones nucleares, que deben incluir la mayor diversidad posible evitando redundancias, y, por lo general, tener un tamaño inferior al 20% de la colección original. A partir de la colección completa de variedades locales de trigo blando, en el CRF-INIA se realizó un cribado seleccionando 522 accesiones donde se excluyeron duplicados. Posteriormente, dentro de este grupo se seleccionaron 189 accesiones con objeto de cubrir la variabilidad morfológica existente. Este subconjunto de variedades se ha caracterizado a nivel fenotípico y molecular. Incluyendo caracteres agromorfológicos (cuantitativos y cualitativos), marcadores bioquímicos y genotipado a nivel genómico empleando la tecnología DArTseq. Este conjunto de datos constituye el punto de partida del presente trabajo donde se ha abordado la creación de la colección nuclear española de trigo blando. En primer lugar, se ha verificado la representatividad de la variabilidad existente en las 189 accesiones con datos geográficos y morfológicos. Posteriormente, tras estimar el tamaño más adecuado para la colección nuclear, se ha realizado la selección de entradas utilizando cuatro métodos diferentes.: 1) muestreo al azar de las accesiones, 2) selección mediante datos geográficos y morfológicos, 3) selección para maximizar la heterocigosidad estimada con 58K marcadores moleculares, y 4) selección mediante muestreo estratificado en poblaciones genéticas teniendo en cuenta la diversidad de cada población. Para validar las cuatro colecciones obtenidas, se ha comparado su diversidad con la existente en las 189 accesiones de partida. Para ello se han empleado datos geográficos, fenotípicos, bioquímicos y marcadores SNPs. Los resultados obtenidos han mostrado la ventaja que ofrece utilizar datos de caracterización molecular para complementar la información geográfica y fenotípica. De los métodos utilizados, tanto el método de estratificación como el de maximización de la heterocigosidad han mostrado su utilidad para crear colecciones nucleares. En cambio, la selección basada exclusivamente en datos geomorfológicos ha sido menos eficiente a la hora de cubrir la diversidad existente. El presente trabajo ha permitido proponer una selección de 94 accesiones de trigo blando, que podrán llegar a formar parte de la futura colección nuclear española conservada en el CRF- INIA facilitando el empleo de estos recursos tradicionales en programas de mejora., Este trabajo de investigación ha sido respaldado por los proyectos RFP2015-00008- C04-01 y AGL2016-77149-C2-1-P del Ministerio de Economía, Industria y Competitividad, y los proyectos RF2007-00001-C05 y AT2016-006 del Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Neuroprotective mechanisms of resveratrol in a high-fat diet-fed Alzheimer's disease mouse model

  • Gatius, Alaó
Over the last decades there has been an over consumption of foods rich in animal fats that has led to a global obesity pandemic. Obesity presents itself with a number of comorbidities, including an increased risk for the development of neurodegenerative disorders such as Alzheimer’s disease (AD). On the other hand, reducing caloric intake has showed to delay age-related diseases and resveratrol, a polyphenol produced by a variety of plants, has emerged as a potent mimetic of this caloric restriction. The mechanisms underlying both effects are not fully understood and, as potential therapeutic targets, need to be thoroughly analyzed. To this end, we have analyzed molecular pathways involved in memory loss in mice as a result of a high-fat diet (HFD) administration and the role that resveratrol supplementation on this diet may play. We have focused on 6-months-old 5xFAD mice, which are transgenic AD mice with a high amyloid burden, and wild type (WT) mice. Both mice strains fed with HFD showed impairment of recognition memory but when resveratrol was added to the HFD, recognition memory was restored. Moreover, our results indicate that HFD boosts amyloid pathology in both, WT and 5xFAD mice, mainly through the potentiation of the amyloidogenic pathway and the reduction of the non-amyloidogenic one. Namely, we identified an increase in β-secretase (BACE1) protein levels in both strains and a decrease in α-secretase (ADAM10) expression in WT mice after HFD administration. Tau pathology was as well aggravated in both strains. Interestingly, HFD has showed the capacity to enhance the activity of the ubiquitin-proteasome system, being the most significant changes the induction of proteasome caspase-like and chymotrypsin-like activities. Remarkably, resveratrol has demonstrated the capability to normalize all the pathological changes induced by the HFD in both WT and 5xFAD mice, confirming its preventive and therapeutic potential against neurodegeneration., SAF2016-77703-C2-2-R of the Ministerio de Economía y Competitividad, Spain and the European Regional Development Fund (ERDF); AGAUR 2017-SGR-106 and the CERCA Programme of the Generalitat de Catalunya; R. Copas and C. Sanfeliu belong to Group 05 of CIBER Epidemiología y Salud Pública (CIBERESP) of the Instituto de Salud Carlos III, Ministerio de Sanidad y Consumo, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Lymphoblasts as potential peripheral biomarkers of Alzheimer's disease and the protective role of resveratrol

  • Senserrich, Júlia
Alzheimer’s disease (AD) is the most common neurodegenerative disorder and first cause of dementia all over the world. It is characterized by a progressive neuronal loss. The main risk factor for developing AD is the age and it is known that there are shared pathological changes between them. Major pathological hallmarks include extracellular deposits of amyloid protein and intracellular deposits of neurofibrillary tau protein. Moreover, it is though that β-amyloid peptide induce cytotoxicity by the generation of reactive oxygen intermediates, contributing to protein tau’s hyperphosphorylation., The study used immortalised lymphocytes from patients of sporadic AD and age-matched healthy controls with following aims: First, use real-time PCR to verify the results of several genes expression analysed by array, in a previous study. Second, investigate the potential role of resveratrol, inducing an upregulation of genes involved in the antioxidant cell response and regulating the aging pathway. Finally, establish the different sensitivity between the human immortalized lymphocyte cell lines and human neuroblastoma cell lines, both treated with resveratrol and hydrogen peroxide (H2O2), an oxidative stress inductor., The current study was observed that gene expression results by PCR did not correlated with those obtained by array, suggesting a variability through individuals. Moreover, aging genes seemed to be more expressed by AD patients, but resveratrol did not induce any effect. Contrary to genes involved in an antioxidant response, which an upregulation induced by resveratrol was clearly demonstrated in most antioxidant genes tested. In addition, it was seen the high toxicity produced by an oxidative stress inductor and the trace that resveratrol 50µM could be the threshold of toxicity for neuronal cells, while lymphoblastomas showed to be more resistant to those compounds., SAF2016-77703-C2-2-R of the Ministerio de Economía y Competitividad, Spain and the European Regional Development Fund (ERDF); AGAUR 2017-SGR106 and the CERCA Programme of the Generalitat de Catalunya; C. Sanfeliu belong to Group 05 of CIBER Epidemiología y Salud Pública (CIBERESP) of the Instituto de Salud Carlos III, Ministerio de Sanidad y Consumo, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Epoxide Hydrolase enzyme as a therapeutic target against Alzheimer's Disease

  • Almenara-Fuentes, Lidia
Alzheimer’s Disease (AD) represents a serious problem for the population health due to the increase in the life expectancy. Inflammation in AD is widely present and it is considered as a contributor to the cognitive loss and neurodegeneration. Epoxyeicosatrienoic acids (EETs) have anti-inflammatory properties which disappear when the enzyme soluble Epoxide Hydrolase (sEH) metabolizes them to the corresponding dihydroxyeicosatrienoic acids (DHETs). SEH is emerging as a promising pharmacological target because allows the increase of EETs and keep them active. The aim of the present study was to calculate the half maximal inhibitory concentration (IC50) of a newly synthetized sEH inhibitors (UB21, UB23, UB24, UB28, EPB50 and EV52), study their toxicity and the anti-inflammatory effects. SH-SY5Y cell cultures were used to the IC50 calculation and the toxicity of each sEHi. To study the inflammatory effects, lipopolysaccharide (LPS) stimulated microglial, BV2 cells were used to obtain conditioned media with the proinflammatory mediators. Modulation of the inflammatory pathways iNOS and NFĸB, and the release of proinflammatory cytokines were analyzed by techniques of Western Blot, immunocytochemistry and ELISA. All agents showed a higher inhibitory potency than the reference compound 1-Trifluoromethoxyphenyl-3-(1-propionylpiperidin-4-yl) urea (TPPU), being the IC50 of UB23 and UB28 at nanomolar range. EV52 could not been tested due to their random activity values. All sEHi were not cytotoxic at the anticipated concentrations, except EV52. The preliminary testing of anti-inflammatory effects unveils UB23 as the best candidate, SAF2016-77703-C2-2-R of the Ministerio de Economía y Competitividad, Spain and the European Regional Development Fund (ERDF); AGAUR 2017-SGR-106 and the CERCA Programme of the Generalitat de Catalunya; R. Copas and C. Sanfeliu belong to Group 05 of CIBER Epidemiología y Salud Pública (CIBERESP) of the Instituto de Salud Carlos III, Ministerio de Sanidad y Consumo, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Robot Learning from Demonstration with Gaussian Processes

  • Arduengo, Miguel
Trabajo fin de máster presentado en la Universidad Politécnica de Cataluña.--2021-06-21, Autonomous systems are no longer confined to factories, but they are progressively spreading to urban, social, and assistive domains. However, in order to become handy co-workers and helpful assistants, robots must be endowed with quite different abilities than their industrial ancestors, and a lot of additional research is still required. A key challenge in intelligent robotics is creating autonomous agents that are capable of directly interacting with the world around them to achieve their goals. Learning plays a central role in intelligent autonomous systems, as the real world contains too much uncertainty and a robot must be capable of dealing with environments that neither it nor its designers have foreseen. Learning from demonstration is a promising paradigm that allows robots to learn complex tasks that cannot be easily scripted, but can be demonstrated by a human teacher. In this thesis, we develop complete learning from demonstration framework. We first present a whole-body teleoperation approach for human motion transfer, which allows a teacher equipped with a motion capture system to intuitively provide demonstrations to a robot. Then, to learn a generalized rep- resentation of the task which can be adapted to unforeseen scenarios, we unify in a single, entirely Gaussian-Process-based formulation, the main components of a state-of-the-art method. We evaluate our approach through a series of real-world experiments with the manipulator robot TIAGo, achieving satisfactory results. Finally, we must be aware that we are in a technological inflection point in which robots are developing the capacity to greatly increase their cognitive and physical capabilities. This will raise complex issues regarding the economy, ethics, law, and the environment, which we provide an overview of in this thesis. Intelligent robotics offer an unimaginable spectrum of possibilities, with the appropriate attention and the right policies they open the doors to new sources of value and growth. However, it is in the hands of scientists and engineers to not look away and anticipate the potential impacts in order to turn robots into the motor of global prosperity
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Monomeric C Reactive Protein and soluble Epoxide Hydrolase as novel targets for Alzheimer's disease therapy

  • Aguirre Infantes, Samuel
Trabajo fin de máster presentado en la Universidad de Barcelona, Máster en Neurociencias.--Calificación: Excelente, Alzheimer’s Disease (AD) represents a serious problem for the public health due to the increase in the life expectancy that rises the number of patients affected. After ischemia or stroke, a high percent of patients develops ischemia. Inflammation in AD is widely present and it is considered as a contributor to the cognitive loss and neurodegeneration. Monomeric C reactive protein (mCRP) has been recently described as a possible link between ischemia, inflammation and dementia. Epoxyeicosatrienoic acids (EETs) have anti-inflammatory properties which disappear when the soluble Epoxide Hydrolase (sEH) metabolizes them to sub-products. Thus, inhibiting the sEH (with TPPU) or mCRP could be a potential target to treat AD. The aim of this study was to evaluate both mCRP and sEH effects in C57BL6 mice and compare them to a well-established AD mouse model: 5xFAD mice. Mice underwent stereotaxic surgery to administrate mCRP at the hippocampus. Several behavioral tests, Western Blot and RT-PCR analysis were done one month after surgery. mCRP treated mice showed recognition memory and spatial memory loss. TPPU conferred neuroprotection against cognitive loss, as well as an increase in synaptic plasticity. The molecular pathways through which mCRP and TPPU act are still unclear and further studies are planned. 5xFAD mice showed cognitive loss, amyloid pathology and neuroinflammation, as expected. Keywords:, This work was supported by grants SAF2016-75508 from the Spanish MINECO and FEDER; 2017-SGR-106 from AGAUR and the CERCA Programme from Generalitat de Catalunya
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Tratamiento de enzimas a altas presiones

  • Juárez Ulzurrun, Sara
Máster en Biología Vegetal Aplicada., Los residuos de la industria son cada vez más abundantes en un mundo que se encuentra actualmente en desarrollo. En una sociedad cada vez más concienciada con el despilfarro de alimentos y con el cuidado del medio ambiente se hacen necesarias técnicas adecuadas para la gestión de residuos consecuencia de estas prácticas industriales. En la industria alimentaria se producen numerosas sustancias residuales, muchas de ellas de origen vegetal, como ocurre con los subproductos de alcachofa y la okara, que pueden ser aptas para su reutilización. En el estudio se propone la utilización de celulasas para el procesado de estos sustratos potenciado por la aplicación de altas presiones hidrostáticas para la obtención de oligosacáridos, moléculas bioactivas de interés para la salud. Para estudiar el efecto de la presión en el funcionamiento de las celulasas se expresó heterólogamente en Escherichia coli del módulo catalítico de la Endoglucanasa II (EC:3.2.1.4) de Trichoderma reesei (Hypocrea jecorina) para caracterizarla y valorar su uso frente a estos sustratos. Los resultados obtenidos muestran una buena actividad de la proteína recombinante, con una mayor actividad a pH ácido y con una estabilidad aceptable frente a la temperatura. La actividad de la enzima aumentó hasta un 70% cuando se ensayó a altas presiones (> 100 MPa) empleando carboximetilcelulosa como sustrato. Sin embargo los ensayos, tanto a presión atmosférica como a altas presiones mostraron una capacidad de actuar frente a los subproductos de alcachofa y la okara. El comportamiento de la enzima a alta presión es prometedor y sugiere que esta enzima, combinada con otras celulasas, puede suponer una alternativa para la reutilización de subproductos de la industria para la obtención de biomoléculas de interés, dándoles nuevos usos y contribuyendo a la economía circular., Este Trabajo Fin de Máster se ha realizado en el Marco del proyecto AGL2016-77056-R (AEI/FEDER, UE) titulado “Mejora de la funcionalidad prebiótica de subproductos agroalimentarios por tratamiento simultáneo con enzimas hidrolíticas y alta presión hidrostática”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Papel de la coloración del plumaje en la flexibilidad de las normas de decisión parentales: un estudio en el herrerillo común, Cyanistes caeruleus (Linnaeus, 1758)

  • Sáez-Royuela Pacheco, Carmen
La resolución de los conflictos familiares sobre el cuidado parental involucra elaboradas interacciones de comportamiento donde la expresión de señales y el intercambio de información juegan un papel central. Hasta ahora, por lo general, la atención se ha centrado en cómo las señales expresadas por los adultos, sobre todo los machos, afectan al comportamiento de la pareja, en un contexto de selección sexual. Sin embargo, el efecto de las señales parentales sobre el comportamiento de todos los miembros de la familia permanece inexplorado. El objetivo principal de este trabajo es analizar el efecto de las señales sobre múltiples interacciones intrafamiliares y explorar las respuestas específicas de machos y hembras frente a la expresión de estas señales. Concretamente, nuestra hipótesis de estudio plantea que el color del plumaje expresado por los padres (un rasgo que indica calidad parental) afecta a las normas de decisión de toda la unidad familiar. Para comprobar este hipótesis, se redujo experimentalmente el color amarillo ultravioleta (UV) del pecho de uno de los miembros de la pareja en 61 nidos de herrerillo común, Cyanistes caeruleus (Linnaeus, 1758), y se analizó su efecto sobre variables de comportamiento . En los nidos en los que uno de los adultos presentó color UV reducido (y, por tanto, aparente peor calidad), las hembras, pero no los machos, aportaron presas más pequeñas al nido. Además, en los nidos con mayor número de pollos, las hembras experimentales cebaron menos que las hembras en los nidos controles. Sin embargo, las cebas de los machos no se vieron afectadas por el tratamiento. Por otro lado, los pollos de nidos experimentales aumentaron la petición conforme avanzó la hora del día, pero sólo en presencia de su madre. Por último, en los nidos experimentales, los pollos cebados ocuparon con mayor frecuencia la misma posición que sus padres, mientras que los pollos de nidos controles consiguieron comer en cualquiera de las posiciones. En general, nuestros resultados sugieren que las señales expresadas por los padres modulan múltiples decisiones intrafamiliares y que existen normas específicas según el sexo en función de estas señales. Las hembras, en general, fueron más flexibles en respuesta a estas señales, tal vez porque invierten en mayor medida en la reproducción e incurren en más costes que los machos. El avance en el conocimiento del papel de estas señales en los conflictos intrafamiliares depende de una mejor comprensión sobre cómo interactúan entre sí todos los miembros de la unidad familiar., The resolution of family conflicts over parental care involves elaborate behavioral interactions where signal expression and information exchange play a central role. Until now, in general, attention has focused on how the signals expressed by adults, especially males, affect the mate's behavior, in a context of sexual selection. However, the effect of parental signals on the behavior of all family members remains unexplored. The main objective of this work is to analyze the effect of signals on multiple intrafamily interactions and to explore the specific responses of males and females against the expression of these signals. Specifically, our study hypothesis states that the color of the plumage expressed by the parents (a feature that indicates parental quality) affects the decision rules of the whole family unit. To test this hypothesis, we experimentally reduced the yellow ultraviolet (UV) color of breast feathers in one parent of each of 61 blue tits nests, Cyanistes caeruleus (Linnaeus, 1758), and analyzed its effect on the behavior of all family members. In the nests in which one of the adults presented reduced UV color (and therefore, apparently worse quality), the females, but not the males, contributed smaller preys to the nest. In addition, in the nests with the highest number of nestlings, the experimental females reduced feeding rates compared to females in control nests. However, male feeding bouts were not affected by the treatment. Furthermore, the nestlings of experimental nests increased the begging behavior as the time of day progressed, but only in the presence of their mother. Finally, in experimental nests, nestlings occupied more frequently the same position as their parents when being fed, while control nestlings managed to eat in any of the positions. In general, our results suggest that signals expressed by the parents modulate multiple intrafamilial decisions and that there are specific norms according to sex based on these signals. Females, in general, were more flexible in response to these signals, perhaps because they invest more in reproduction and incur more costs than males. The advance in the knowledge of the role of these signals in intrafamily conflicts depends on a better understanding of how all the family members interact with each other., Ministerio de Economía y Competitividad (España), Fondo Europeo de Desarrollo Regional (FEDER), CSIC - Museo Nacional de Ciencias Naturales (MNCN), Peer reviewed