Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Computational modeling of the mechanical behavior of ductile metals with anisotropic constitutive models

  • Hosseini, Navab
Ductile metals are commonly used to build protective structures, which may be subjected to quasi-static or dynamic loads. When a sufficient amount of load is applied, the structure deforms plastically. A ductile failure occurs when a structure undergoes significant plastic deformation and can no longer absorb the energy of the applied load. In recent decades, numerous studies have been conducted on the failure of ductile metals, leading to a deeper understanding of the effects of anisotropy, tension-compression asymmetry, porosity, strain rate, and temperature dependence on plastic instabilities and ductile failure. However, the effects of anisotropy on the ductile failure deserve further analysis. This dissertation contributes to the understanding of the key role that material behavior plays in the evolution of quasi-static ductile failure, with a particular focus on anisotropy. To investigate the effects of anisotropy on quasi-static ductile failure, we first developed a reliable and computationally efficient stress integration scheme. Using this scheme, we implemented three elastic isotropic and plastic anisotropic constitutive models with yielding described by the Yld2004-18p, CPB06ex2, and Yld2011-27p criteria, respectively, in the finite element code ABAQUS. We then performed finite element calculations using a cubic unit cell model with a spherical void in the center. Subsequently, we employed an innovative approach to demonstrate that anisotropy may either promote or postpone ductile failure. The study reveals that anisotropy plays a critical role in determining the onset and progression of failure. The findings highlight the need for a nuanced understanding of material anisotropy to predict and mitigate the risks of ductile failure in protective structures, The research leading to the results reported in this doctoral thesishas received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme. Project PURPOSE, grant agreement 758056., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Javier Segurado Escudero.- Secretario: Lars Edvard Blystad Dæhli.- Vocal: Cihan Tekoglu
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Multiple localization and fracture in metallic rings and plates subjected to dynamics expansion

  • Murlidhar, Anil Kumar
Ductile materials are commonly used in high-strain rate applications involving impact or blast loads due to their notable capacity to absorb energy and undergo plastic deformation before fracture. Over the last two decades, studies on dynamic strain rates have evolved dramatically, leading to a better knowledge of material behavior under high-speed loading situations and generating advances in a variety of industries. Imperfections in ductile metals, such as cracks, inclusions, and voids, are significant, and these imperfections can significantly impact the material’s mechanical properties and structural integrity, thereby affecting its suitability for various industrial applications. Hence, further research is necessary to understand the mechanical behavior of ductile metals with imperfections. This doctoral thesis investigates the effect of porosity, anisotropy, and tensioncompression asymmetry on the mechanical response of metallic materials under dynamic loading conditions. In the first part of the thesis, we used linear stability analysis and unit-cell finite element calculations to investigate the onset of necking instabilities in porous ductile plates under biaxial loading. In the next part of the work, we used three techniques-linear stability analysis, a nonlinear two-zone model, and unit-cell finite element calculations-to examine the necking formability of anisotropic and tension-compression asymmetric metallic sheets subjected to in-plane loading paths spanning plane strain tension to near equal-biaxial tension. The last part of the study focused on examining the fragmentation process of 3D-printed AlSi10Mg porous ring specimens. This was achieved by implementing two experimental ring expansion test setups and subjecting the aluminum alloy to electromagnetic and mechanical loadings. The objective was to gain insights into the behavior of these alloys when exposed to high strain rates., The research leading to the results reported in this doctoral thesis has received funding from European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme. Project PURPOSE, grant agreement 758056., Presidente: Ahmed Benallal. Vocal: Christophe Czarnota. Secretario: Borja Erice Echavarri
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Role of porous microstructure on dynamic shear localization and ductile failure

  • Ambikadevi Rajasekharan Nair, Vishnu
This doctoral thesis aims to provide a comprehensive analysis of the role of porous microstructure on dynamic shear localization and ductile failure. For this purpose, a computational approach was developed that includes large-scale 3D finite element models incorporated with actual porous microstructures that are derived from different additively manufactured materials. This is the distinctive feature of the numerical simulations conducted in this study, in which a large population of voids that are statistically representative of the actual porosity in 3D-printed metals has been included. Additional microstructures varying the void volume fraction, the mean and standard deviation of the size distribution of voids were generated, enabling a systematic parametric analysis of the microstructural features. Finite element simulations of multiple shear bands formation in radially collapsing thick-walled cylinders and shear band formation in thin-tubes subjected to dynamic torsion were performed to investigate the effect of spatial and size distribution of voids on dynamic shear localization. The numerical results demonstrate that microstructural porosity promotes dynamic shear localization, determining preferential sites for the nucleation of the shear bands, accelerating their development, and tailoring their direction of propagation. Specifically, collapsing thick-walled cylinder calculations bring out that, for a given void volume fraction more shear bands are nucleated as the number of voids increases, while the shear bands are triggered earlier and develop faster as the size of the pores increases. Moreover, the numerical results for porous thin-tubes subjected to dynamic torsion quantitatively show that the size of the largest pore is a main microstructural feature controlling the specimen ductility. Furthermore, this numerical methodology was extended to perform unit-cell calculations to investigate the void growth in porous ductile materials under monotonic loading conditions by prescribing constant triaxiality and Lode parameter throughout the loading. The simulations were carried out with random spatial distributions of pores and with void clusters. The calculations with random spatial distribution of voids revealed that the interaction between neighboring pores dictates the volume evolution of individual voids, especially at higher macroscopic triaxiality. The calculations with clusters demonstrated that pores clustering promotes localization/coalescence due to increased interaction between the voids, resulting in an increased growth rate of voids in clusters with large number of pores. Moreover, the results for the evolution of the distribution of plastic strains in the unit-cell have provided some quantitative indications of the role of porous microstructure on the development of heterogeneous plastic strain fields which promote macroscopic strain softening., The research leading to the results reported in this doctoral thesis has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme. Project PURPOSE, grant agreement 758056., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Alain Molinari.- Secretario: Shmuel Osovski.- Vocal: Tore Børvik