Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Magnetic in vitro platform to simulate mechanical scenarios in brain pathologies

  • Gómez Cruz, Clara
Mención Internacional en el título de doctor, This doctoral dissertation provides novel methodological approaches to the in vitro study of soft tissue mechanobiology through the application of magnetorheological elastomers. Moreover, it provides insights into the mechanical and functional responses of brain cells to mechanical events., I want to acknowledge the support from the Ministerio de Universidades, Spain (FPU20/01459), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 947723, project: 4D-BIOMAP)., Programa de Doctorado en Ciencia y Tecnología Biomédica por la Universidad Carlos III de Madrid, Presidente: José Manuel García Aznar.- Secretaria: María Moros Caballero.- Vocal: Stephen Thorpe
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Automating Multiphysics Material Modelling: Discovering new microstructural mechanisms through automation

  • González Saiz, Ernesto
Mención Internacional en el título de doctor, Esta tesis investiga el comportamiento de polímeros magneto-activos (MAPs), concretamente los elastómeros magnetorreológicos (MREs), en el contexto de dos proyectos de investigación más amplios: 4D-BIOMAP y META-RESPONSIVE. El primer proyecto pretende reproducir el entorno mecánico de células y tejidos biológicos utilizando MREs que respondan a campos magnéticos, proporcionando información sobre el comportamiento celular en condiciones mecánicas que simulen escenarios patológicos. El segundo proyecto se centra en el diseño de estructuras multiestables que transitan de manera abrupta entre estados configuracionales estables como respuesta a un estímulomagnético externo. Uno de los retos principales en ambos proyectos es el desarrollo de modelos constitutivos que describan el comportamiento magneto-mecánico de MREs blandos. Estos modelos son esenciales para guiar tanto el sistema de control que impone la actuación mecánica en las células como el diseño de estructuras biestable inteligentes. Dichas tareas suponen un gran desafío, especialmente cuando se estimulan a altas velocidades. Esta tesis aborda la necesidad demodelos que puedan capturar las interacciones entre las partículas magnéticas y la matriz polimérica, que afectan a propiedades del material tales como la rigidez, la viscosidad aparente y la disposición de las partículas. Además, la tesis explora la respuesta transitoria de MREs blandos bajo diferentes estímulos magnéticos externos, identificando respuestas clave como aumentos significativos en los tiempos de relajación del material en comparación con condiciones puramentemecánicas o el descubrimiento de un fenómeno magneto-mecánico denominado efecto "double-bumping". Durante el desarrollo de la investigación, estas respuestas se asocian a una reorganización dependiente del tiempo de las partículas magnéticas dentro de la matriz polimérica. Para comprender y modelizar mejor estos comportamientos, la tesis introduce un marco de machine learning (ML). Estemarco automatiza la identificación y calibración de modelos constitutivos, optimizando la cinemática, las ecuaciones constitutivas reológicas y los parámetros del modelo a partir de datos experimentales. El marco deML es flexible y se ha aplicado a varios tipos de materiales, incluidosmodelos hiperelásticos, viscohiperelásticos y magneto-viscohiperelásticos. Esta tesis también presenta una formulación del medio continuo novedosa para describir las interacciones magneto-viscoelásticas y los reordenamientos microestructurales en estos MREs bajo actuación magnética. La investigación tiene importantes implicaciones para los campos de la robótica blanda, la bioingeniería y la mecanomedicina, donde es crucial un control preciso de las propiedades de estos materiales. También abre nuevas posibilidades para crear materiales con actuación rápida y remota, y conceptualiza posibles actuaciones basadas en memoria de carga, con aplicaciones potenciales en sistemas adaptativos, dispositivos médicos y sistemas informáticos avanzados., This dissertation investigates magneto-active polymers (MAPs), specifically magnetorheological elastomers (MREs), in the context of two major research projects: 4D-BIOMAP and META-RESPONSIVE. The first project aims to replicate the mechanical environment of biological cells and tissues using MAPs that respond to magnetic fields, providing insights into cell behaviour under varying mechanical conditions, particularly in pathological scenarios. The second project focuses on designing multistable structures that rapidly switch between stable configurational states under remote magnetic actuation, with applications in soft robotics and multifunctional materials. A central challenge in both projects is the development of robust and reliable constitutive models describing the magneto-mechanical behaviour of mechanically soft MREs. These models are essential to guide both the control system that imposes the mechanical actuation in cells and the design of such multifunctional structures. These tasks are specially challenging when theMREs are actuated at high rates due to the complexity of identifying and incorporating the most relevant governing mechanisms. This thesis addresses the need for models that can capture the complex interactions between the magnetic particles and the polymer matrix, which affect the material’s properties, such as stiffness, apparent viscosity, and particles arrangement. In addition, it explores the transient response of soft MREs under different external magnetic stimuli, revealing several key findings like significant increases in the material relaxation times compared to purely mechanical conditions or the discovery of a novel magneto-mechanical phenomenon termed the double-bumping effect. During this dissertation, these findings are attributed to a time-dependent rearrangement of the magnetic particles within the polymer matrix. To better understand and model these complex behaviours, the thesis introduces a machine learning (ML) framework. This framework automates the identification and calibration of constitutive models, optimising kinematics, rheological constitutive equations and model parameters based on experimental data. TheMLapproach is flexible and has been applied to variousmaterial types, including hyperelastic, viscohyperelastic, and magneto-viscohyperelastic models. Furthermore, since this ML framework relies on a database of constitutive models gathered from the literature and the observed MREs exhibit unprecedented magneto-mechanical behaviours, the thesis also presents a continuummodel to account for magneto-viscoelastic interactions and microstructural rearrangements in MREs under magnetic actuation. This model is validated against the gathered experimental observations, offering great opportunities for designing new materials and actuators. Overall, the research has significant implications for soft robotics, bioengineering, and mechanomedicine, where precise control over material properties is crucial. It also opens new possibilities for creating fast-actuating, force-memorymaterials, with potential applications in adaptive systems, medical devices, and advanced computing systems., Iwould like to thank the support given by theMinisterio de Ciencia e InnovacionMCIN/AEI/10.13039/501100011033 under Grant number PID2020-117894GA-I00, and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 947723, project: 4D-BIOMAP)., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Ramón Eulalio Zaera Polo.- Secretario: Jesús Martínez Frutos.- Vocal: Mokarram Hossain
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Development of Multistable Structures based on Magneto-Active Metamaterials, Desarrollo de estructuras multiestables basadas en metamateriales magneto-activos

  • Pérez García, Carlos
Mención Internacional en el título de doctor, This thesis develops experimental and computational methodologies to conceptualize and implement multifunctional metastructures with programmed instabilities. The approaches provided allow for designing bistable structural responses to external magnetic actuation, taking advantage of magneto-viscoelastic coupling. In addition, this thesis devises magneto-responsive metastructures that, by tuning magnetic configurations and applying external magnetic fiields, achieve adaptable mechanical behavior, paving the way for engineered structures with tunable stress-strain and energy absorption properties., The work presented in this thesis has received nancial support from Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033 underGrant number PID2020- 117894GA-I00, and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 947723, project: 4D-BIOMAP)., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Konstantinos Danas.- Secretario: Daniel Barba Cancho.- Vocal: Fabrizio Scarpa
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Mechanical characterization, constitutive modeling and applications of ultra-soft magnetorheological elastomers

  • Moreno Mateos, Miguel Ángel
Mención Internacional en el título de doctor, Smart materials are bringing sweeping changes in the way humans interact with engineering devices. A myriad of state-of-the-art applications are based on novel ways to actuate on structures that respond under different types of stimuli. Among them, materials that respond to magnetic fields allow to remotely modify their mechanical properties and macroscopic shape. Ultra-soft magnetorheological elastomers (MREs) are composed of a highly stretchable soft elastomeric matrix in the order of 1 kPa and magnetic particles embedded in it. This combination allows large deformations with small external actuations. The type of the magnetic particles plays a crucial role as it defines the reversibility or remanence of the material magnetization. According to the fillers used, MREs are referred to as soft-magnetic magnetorheological elastomers (sMREs) and hard-magnetic magnetorheological elastomers (hMREs). sMREs exhibit strong changes in their mechanical properties when an external magnetic field is applied, whereas hMREs allow sustained magnetic effects along time and complex shape-morphing capabilities. In this regard, end-of-pipe applications of MREs in the literature are based on two major characteristics: the modification of their mechanical properties and macrostructural shape changes. For instance, smart actuators, sensors and soft robots for bioengineering applications are remotely actuated to perform functional deformations and autonomous locomotion. In addition, hMREs have been used for industrial applications, such as damping systems and electrical machines. From the analysis of the current state of the art, we identified some impediments to advance in certain research fields that may be overcome with new solutions based on ultrasoft MREs. On the mechanobiology area, we found no available experimental methodologies to transmit complex and dynamic heterogeneous strain patterns to biological systems in a reversible manner. To remedy this shortcoming, this doctoral research proposes a new mechanobiology experimental setup based on responsive ultra-soft MRE biological substrates. Such an endeavor requires deeper insights into the magneto-viscoelastic and microstructural mechanisms of ultra-soft MREs. In addition, there is still a lack of guidance for the selection of the magnetic fillers to be used for MREs and the final properties provided to the structure. Eventually, the great advances on both sMREs and hMREs to date pose a timely question on whether the combination of both types of particles in a hybrid MRE may optimize the multifunctional response of these active structures. To overcome these roadblocks, this thesis provides an extensive and comprehensive experimental characterization of ultra-soft sMREs, hMREs and hybrid MREs. The experimental methodology uncovers magneto-mechanical rate dependences under numerous loading and manufacturing conditions. Then, a set of modeling frameworks allows to delve into such mechanisms and develop three ground-breaking applications. Therefore, the thesis has lead to three main contributions. First and motivated on mechanobiology research, a computational framework guides a sMRE substrate to transmit complex strain patterns in vitro to biological systems. Second, we demonstrate the ability of remanent magnetic fields in hMREs to arrest cracks propagations and improve fracture toughness. Finally, the combination of soft- and hard-magnetic particles is proved to enhance the magnetorheological and magnetostrictive effects, providing promising results for soft robotics., Los materiales inteligentes están generando cambios radicales en la forma que los humanos interactúan con dispositivos ingenieriles. Distintas aplicaciones punteras se basan en formas novedosas de actuar sobre materiales que responden a diferentes estímulos. Entre ellos, las estructuras que responden a campos magnéticos permiten la modificación de manera remota tanto de sus propiedades mecánicas como de su forma. Los elastómeros magnetorreológicos (MREs) ultra blandos están compuestos por una matriz elastomérica con gran ductilidad y una rigidez en torno a 1 kPa, reforzada con partículas magnéticas. Esta combinación permite inducir grandes deformaciones en el material mediante la aplicación de campos magnéticos pequeños. La naturaleza de las partículas magnéticas define la reversibilidad o remanencia de la magnetización del material compuesto. De esta manera, según el tipo de partículas que contengan, los MREs pueden presentar magnetización débil (sMRE) o magnetización fuerte (hMRE). Los sMREs experimentan grandes cambios en sus propiedades mecánicas al aplicar un campo magnético externo, mientras que los hMREs permiten efectos magneto-mecánicos sostenidos a lo largo del tiempo, así como programar cambios de forma complejos. En este sentido, las aplicaciones de los MREs se basan en dos características principales: la modificación de sus propiedades mecánicas y los cambios de forma macroestructurales. Por ejemplo, los campos magnéticos pueden emplearse para inducir deformaciones funcionales en actuadores y sensores inteligentes, o en robótica blanda para bioingeniería. Los hMREs también se han aplicado en el ámbito industrial en sistemas de amortiguación y máquinas eléctricas. A partir del análisis del estado del arte, se identifican algunas limitaciones que impiden el avance en ciertos campos de investigación y que podrían resolverse con nuevas soluciones basadas en MREs ultra blandos. En el área de la mecanobiología, no existen metodologías experimentales para transmitir patrones de deformación complejos y dinámicos a sistemas biológicos de manera reversible. En esta investigación doctoral se propone una configuración experimental novedosa basada en sustratos biológicos fabricados con MREs ultra blandos. Dicha solución requiere la identificación de los mecanismos magneto-viscoelásticos y microestructurales de estos materiales, según el tipo de partículas magnéticas, y las consiguientes propiedades macroscópicas del material. Además, investigaciones recientes en sMREs y hMREs plantean la pregunta sobre si la combinación de distintos tipos de partículas magnéticas en un MRE híbrido puede optimizar su respuesta multifuncional. Para superar estos obstáculos, la presente tesis proporciona una caracterización experimental completa de sMREs, hMREs y MREs híbridos ultra blandos. Estos resultados muestran las dependencias del comportamiento multifuncional del material con la velocidad de aplicación de cargas magneto-mecánicas. El desarrollo de un conjunto de modelos teórico-computacionales permite profundizar en dichos mecanismos y desarrollar aplicaciones innovadoras. De este modo, la tesis doctoral ha dado lugar a tres bloques de aportaciones principales. En primer lugar, este trabajo proporciona un marco computacional para guiar el diseño de sustratos basados en sMREs para transmitir patrones de deformación complejos in vitro a sistemas biológicos. En segundo lugar, se demuestra la capacidad de los campos magnéticos remanentes en los hMRE para detener la propagación de grietas y mejorar la tenacidad a la fractura. Finalmente, se establece que la combinación de partículas magnéticas de magnetización débil y fuerte mejora el efecto magnetorreológico y magnetoestrictivo, abriendo nuevas posibilidades para el diseño de robots blandos., I want to acknowledge the support from the Ministerio de Ciencia, Innovación y Universidades, Spain (FPU19/03874), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 947723, project: 4D-BIOMAP)., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Ramón Eulalio Zaera Polo.- Secretario: Abdón Pena Francesch.- Vocal: Laura de Lorenzis
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Manufacturing, Mechanical Characterization and Modelling of Magneto-Active Hydrogels for Mechano-Biological Stimulation

  • González-Rico Iriarte, Jorge
Mención Internacional en el título de doctor, This thesis presents the development, characterization, and application of magnetoactive hydrogels (MAHs), combining human blood plasma-derived fibrin hydrogels with embedded magnetic particles for magneto-mechanical stimulation in biomedical applications. These hydrogels combine the biocompatibility of biologically derived polymers with the dynamic responsiveness of magneto-sensitive materials. By enabling external control over mechanical properties and deformation through magnetic fields, MAHs provide a versatile platform for biomedical applications. The research is structured into three main components: development of actuation systems, material synthesis and characterization, and the application of the material to specific biomedical fields. First, a magneto-mechanical actuation platform, NeoMag, was designed and validated. This system generates spatially and temporally controlled magnetic fields to apply complex mechanical loading conditions. Validation studies demonstrate the capability of the NeoMag system to stimulate cell cultures seeded on magnetoresponsive polydimethylsiloxane (PDMS) substrates, confirming its potential for replicating physiologically relevant mechanical stimuli. Building upon the NeoMag platform, the second phase focuses on the fabrication and evaluation of MAHs. Using optimized concentrations of fibrin and magnetic particles, various fabrication techniques were explored to ensure uniformity, durability, and functional responsiveness. Extensive characterization revealed these hydrogels exhibit desirable swelling behavior, minimal particle loss, and tunable mechanical and magnetoresponsive properties across macro- and micro-scales. These findings establish MAHs as promising candidates for both therapeutic and investigative biomedical applications. The versatility of MAHs is demonstrated through two applications, controlled drug delivery and mechanical actuation on 3D cell cultures. Regarding controlled drug delivery applications, magneto-mechanical actuation is leveraged to regulate solvent diffusion dynamics within the hydrogels, enabling precise and controlled release of encapsulated agents of interest. Experimental studies using fluorescent markers and real-time imaging elucidate the influence of actuation frequency and mode on diffusion processes. Additionally, computational modeling provides a deeper understanding of the coupled interactions between magneto-mechanical deformation and solvent transport. This dual experimental-computational approach highlights the potential of MAHs as platforms for advanced drug delivery systems capable of reducing systemic side effects while maintaining high local efficacy. On the application of MAHs as 3D scaffolds, the material is used for studying cellular behavior and matrix remodeling under magneto-mechanical stimulation. Fibroblast cultures seeded within these hydrogels demonstrate high viability and responsiveness to mechanical cues. By modulating actuation conditions, it is possible to influence cellular alignment and extracellular matrix (ECM) remodeling. Microstructural analysis through imaging techniques and mechanical characterization confirms the interplay between cellular activity and scaffold properties. These results underscore the potential of MAHs as tools for mechanobiological research and regenerative medicine, particularly in applications such as wound healing, where mechanical stimuli play a key role in recovery. This thesis makes significant contributions to the fields of biomaterials and mechanobiology by introducing a novel, biocompatible material with dynamic and tunable mechanical properties. The integration of NeoMag as a precision actuation system further enhances the utility of MAHs, providing new opportunities for in vitro modeling and therapeutic interventions., Esta tesis presenta el desarrollo, caracterización y aplicación de hidrogeles magnetoactivos (MAHs, por sus siglas en inglés) para estimulación magneto-mecánica en aplicaciones biomédicas. Los MAHs combinan hidrogeles de fibrina, derivada de plasma sanguíneo humano, con partículas magnéticas integradas dispersas y encapsuladas físicamente en la matriz. Estos hidrogeles combinan la biocompatibilidad de los polímeros de origen biológico con la capacidad de respuesta dinámica de los materiales magnetosensibles. Al permitir el control externo a traves de la aplicación de cambios magnéticos de las propiedades mecánicas y los estados de deformación, los MAHs ofrecen una plataforma versátil para aplicaciones biomédicas. La investigación se estructura en tres componentes principales: desarrollo de sistemas de actuación, síntesis y caracterización de materiales, y la aplicación del material a campos biomédicos específicos. Primero, se diseñó y validó una plataforma de actuación magneto-mecánica llamada NeoMag. Este sistema genera campos magnéticos controlables espacial y temporalmente para aplicar condiciones complejas de carga mecánica sobre un substrato magnetoactivo. Los estudios de validación demostraron la capacidad del sistema NeoMag para estimular cultivos celulares sembrados en sustratos de polidimetilsiloxano (PDMS) magnetoactivos, confirmando su potencial para replicar estímulos mecánicos relevantes desde un punto de vista fisiológico. Basándose en la plataforma NeoMag, la segunda fase se centra en la fabricación y evaluación de los MAHs. Utilizando concentraciones óptimas de fibrina y partículas magnéticas, se exploraron diversas técnicas de fabricación para garantizar uniformidad, durabilidad y capacidad de respuesta funcional. Una caracterización exhaustiva reveló que estos hidrogeles presentan un comportamiento de hinchamiento deseable, una pérdida mínima de partículas y propiedades mecánicas y magneto-responsivas ajustables en escalas macro- y micro-métricas. Estos hallazgos posicionan a los MAHs como candidatos prometedores tanto para aplicaciones biomédicas terapéuticas como de investigación. La versatilidad de los MAHs se demuestra en dos aplicaciones principales: la liberación controlada de fármacos y la actuación mecánica en cultivos celulares tridimensionales (3D). En cuanto a la aplicacion de liberación controlada de fármacos, se utiliza la actuación magneto-mecánica para regular las dinámicas de difusión de solventes dentro de los hidrogeles, permitiendo una liberación precisa y controlada de los agentes encapsulados. Los estudios experimentales con marcadores fluorescentes e imágenes en tiempo real esclarecen la influencia de la frecuencia y el modo de actuación en los procesos de difusión. Además, la modelización computacional proporciona una comprensión más profunda de las interacciones acopladas entre la deformación magneto-mecánica y la difusión de solventes. Este enfoque experimental y computacional resalta el potencial de los MAHs como plataformas avanzadas para sistemas de liberación de fármacos, capaces de reducir efectos secundarios sistémicos mientras mantienen una alta eficacia local. En cuanto a la aplicación de los MAHs como andamios tridimensionales, el material se utiliza para estudiar el comportamiento celular y la remodelación de la matriz bajo estimulación magneto-mecánica. Los cultivos de fibroblastos dérmicos humanos sembrados en estos hidrogeles demuestran una alta viabilidad y capacidad de respuesta a las señales mecánicas. Modificando las condiciones de actuación, es posible influir en la alineación celular y la remodelación de la matriz extracelular (ECM). Los análisis microestructurales mediante técnicas de imagen y caracterización mecánica confirman la interacción entre la actividad celular y las propiedades de la matriz. Estos resultados subrayan el potencial de los MAHs como herramientas para la investigación en mecanobiología y medicina regenerativa, especialmente en aplicaciones como la cicatrización de heridas, donde los estímulos mecánicos desempeñan un papel crucial. Esta tesis aporta contribuciones significativas a los campos de los biomateriales y la mecanobiología al introducir un material novedoso, biocompatible y con propiedades mecánicas dinámicas y ajustables. La integración de NeoMag como un sistema de actuación de precisión mejora aún más la utilidad de los MAHs, ofreciendo nuevas oportunidades para modelos in vitro e intervenciones terapéuticas., I would also like to express my gratitude to the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 947723, project: 4D-BIOMAP)., Programa de Doctorado en Ingeniería Mecánica y de Organización Industrial por la Universidad Carlos III de Madrid, Presidente: Armando Emeterio del Río Hernández.- Secretario: Jorge Alegre-Cebollada.- Vocal: Abhay Pandit