Pasar al contenido principal

MODELADO NUMERICO DE LA EVOLUCION TOPOGRAFICA DE IBERIA

CGL2014-59516-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Numerical modeling of continental collision and intraplate deformation. Application to the Cenozoic geodynamic evolution of North Iberia

  • Valverde Perez, Angel
This thesis aims at improving the current understanding of the geodynamic controls on tectonic deformation during plate collision, using the Cenozoic evolution of Iberia as a case scenario. Despite the vast efforts during the last decades, there is a limited understanding today about what plate properties control the propagation of tectonic deformation towards the interior of tectonic plates. Meanwhile, the classic enigmas about the timing and the processes involved in the construction of the Iberian topography also persist: What is the origin of the high average elevation of the Iberian Peninsula? What is the quantitative contribution to topography induced by the intraplate tectonics of Iberia? How was this intraplate deformation in the middle of the Iberian microplate triggered? To answer these questions, I first gathered information about the tectonic events in Iberia during the Cenozoic from previous structural tectonic and geodynamic modelling publications. Continental collision with Eurasia in the north first gave rise to the uprising of the Pyrenean and Basque-Cantabrian chains. Deformation subsequently jumped southwards and formed the elevation of the interior mountain ranges. Meanwhile in the southern margin, the subduction of the Tethys oceanic lithosphere due to the Africa-Iberia convergence gave rise to the Betics and opened the Alborán Sea. The underlaying hypothesis of this thesis is that this succession can be reproduced via a geodynamic model giving the appropriate initial conditions that are in reasonable agreement with the geological setting during the early-Cenozoic Iberia. To this purpose, we carried out a series of high-resolution mechanical and thermomechanical numerical models with a state-of-the-art code named UNDERWORLD 2.0 (still under development at Univ. Melbourne). We first review fundamental ideas such as the patterns of deformation of the lithosphere predicted for converging continental margins, as well as the elevation of mountain ranges in a continental collision scenario. Then we investigate how the crustal deformation accommodates far from the continental margins, taking into account the mathematical equations and physical laws that govern the thermal field and rock deformation. Based on these, a series of mechanical numerical models are developed to explore the possible evolutionary scenarios after a continental collision. Two deformation end member models appear: double-vergence and crustal folding. While in the first one deformation concentrates near the axial collision zone where the orogen develops, in the second, deformation is transmitted farther from the initial contact between lithospheres. We compare these results with patterns of deformation seen in the Pyrenean mountain range as well as other natural scenarios where cortical folding occurs near a thrust failure like in the Zagros Chain in Iran., La presente tesis doctoral aborda el estudio de la evolución geodinámica de sistemas de colisión continental, usando como escenario de referencia la microplaca de Iberia durante el Cenozoico (últimos 65 millones de años). Pese al enorme esfuerzo acumulado por la comunidad geológica en este ámbito, los enigmas clásicos sobre la cronología y los procesos involucrados en la construcción del relieve y el subsuelo ibéricos persisten: ¿Cuál es el origen de la elevada topografía media de la Península? ¿Cómo ha sido construida su actual topografía como resultado de la peculiar posición de la microplaca tectónica de Iberia entre África y Eurasia? Para abordar estas preguntas, he recopilado información de estudios previos sobre episodios tectónicos desde el Cretácico Superior hasta la actualidad con especial atención a los intervalos relacionados con el choque continental con Eurasia que dio lugar al levantamiento de la cadena Pirenaica y Vasco-Cantábrica, la posterior elevación de las cadenas montañosas del interior y la posterior evolución del margen sur en relación con la aproximación entre África e Iberia. Para encontrar los mecanismos responsables de esta evolución, he diseñado una serie de modelos numéricos de alta resolución que simulan en 2D la deformación de la litosfera en límites de placa convergentes, utilizando uno de los programarios más evolucionados de la geodinámica internacional (Underworld 2.0; Univ. Melbourne). Este volumen empieza por tanto explicando las ecuaciones matemáticas y leyes físicas que gobiernan el modelo numérico, las relaciones entre los parámetros físicos y su importancia y sus limitaciones. Así, se han realizado una serie de modelos numéricos sintéticos en esta tesis para identificar los posibles escenarios evolutivos tras un choque continental donde aparecen dos modelos de deformación: doble vergencia y plegamiento cortical. Mientras que en el primero la deformación se concentra en torno a la zona de colisión donde se desarrolla un orógeno mediante fallas que buzan hacia la zona axial, en el segundo se transmite la deformación más lejos de la zona de colisión., This thesis is part of the project MITE (CGL2014-59516) financed by the CSIC. I also thank to the projects AECT-2017-1-0018, AECT-2017-2-00013, AECT- 2017-3-0008, AECT-2018-1-0007, AECT-2018-3-0007, AECT-2019-1-0013 and AECT-2019-2-0005 for allowing me to use the computational resources from the RES (Red Española de Supercompatución) and specially to the Barcelona Supercomputing Center (BSC - CNS). This thesis was part of the national founding from the Ministry of Economy and competitiveness: Programa Estatal de promoción de Talento y su Competitividad I+D+i, ayudas para contratos predoctorales para la formación de doctores 2015 (BES - 2015 - 073348).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Geodynamic modelling of lithosphere subduction and the topographic response to slab tearing. Application to the Gibraltar Arc.

  • Boonma, Kittiphon
Lithospheric slab tearing, the process by which a subducted lithospheric plate is torn apart and sinks into the Earth’s mantle, has been proposed as a cause of significant surface vertical motions. Although this has been linked to the change implied in the isostatic balance in subduction zones, little is known about the mechanisms and rock properties determining the tear propagation and the uplift-subsidence rates involved. This thesis aims to explore the link between the tearing of subducted lithospheric slabs and the associated vertical motions. To this purpose, I first explore the mechanisms controlling the buoyancy of a subducted lithosphere and then, with this understanding, numerically simulate the process of lithospheric tearing upon continental collision, using the Betic Cordillera as a reference scenario where such tearing-uplift interaction has been proposed for this region. With a mineral-physics approach, where a lithospheric mantle can be less dense than the underlying asthenosphere, I explore the controls on lithospheric buoyancy using a 2D thermal- diffusive model of plate convergence. Five chemical compositions and tectonothermal ages were considered, namely Archon (> 2.5 Ga), Proton ( 2.5 − 1.0 Ga), Tecton (< 1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons (Archons) overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson Cycle Having gained these insights into the role of lithospheric buoyancy in subduction settings, I then set to explore the characteristics surrounding lithospheric slab tearing and the asso- ciated surface uplift. I used 3D thermo-mechanical numerical modelling to investigate the geodynamic parameters affecting the slab-tearing initiation and its lateral propagation, and to quantify the corresponding surface vertical motions. The Betics-inspired model suggests x that the obliquity of the continental passive margin (relative to the trench axis) is a major influence on the initiation of slab tearing because it promotes a laterally diachronous conti- nental collision which leads to slab tearing. The model illustrates an east-to-west slab tearing (tearing velocity ∼ 37.6 − 67.6 cm/yr with the lower-mantle viscosity of up to 1022 Pa·s), which leads to surface uplift signature of 0.5 − 1.5 km across the forearc region throughout the tearing process. While the fast slab tearing (< 2 Myr over 600 km wide slab) and the lack of arcuate slab in my models limit a direct comparison with the Western Mediterranean, this approach provides a new insight into the link between slab tearing in the mantle and surface uplift. My models yield uplift rates of 0.23 − 2.16 mm/yr, as a result of slab tearing, which is compatible with the uplift rate needed to achieve an equilibrium between seaway-uplift and seaway-erosion which could have led to the closure of marine gateways that reduced the water-flow from the Atlantic Ocean into the Mediterranean Sea during the first stage of the Messinian Salinity Crisis, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516). This thesis has been developed using the facilities of the Laboratory of Geodynamic Modelling from Geo3Bcn-CSIC.