Pasar al contenido principal

MATERIALES HIBRIDOS MULTIFUNCIONALES BASADOS EN NANO-UNIDADES ESTRUCTURALES ACTIVAS

MAT2017-82288-C2-1-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Selective Oxidation of Methane into Methanol using Sub-Nanometre Copper Clusters: A Computational Study

  • Gallego Rodríguez, Mario
[ES] Se investigó la reacción de metano a metanol (MTM) en zeolitas y zeotipos utilizando clústeres subnanométricos de cobre soportados usando como oxidante O2 y sin la intervención de moléculas de agua en todo momento. Para empezar, se realizó en clústeres aislados de Cu5 y Cu7 para descubrir los principales caminos de reacción y así identificar los principales problemas que pueden ocurrir en cada etapa de la reacción. Se encontró que la reacción transcurre eficientemente a través de un mecanismo Eley-Rideal cuando existen átomos de O bicoordinados estabilizados en las aristas de los clústeres, conduciendo a menores barreras de activación. Sin embargo, la adsorción del grupo metilo y la formación de grupos metoxilo en los clústeres es inevitable, lo que es un importante obstáculo para el proceso. A continuación, se usó el modelo zeolítico SSZ-13 para soportar los clústeres y ver si cuando éstos se encuentran confinados en las cavidades de una zeolita con cantidades variables de Al, este sistema catalítico puede paliar los problemas relacionados con los caminos secundarios y la adsorción de los metilo. Las simulaciones en la disociación de O2 arrojaron un incremento en la carga total positiva de los clústeres Cun conforme al número de átomos de Al en la matriz zeolítica y que una mayor concentración de densidad de carga sobre los átomos de O facilita este paso. Asimismo, los clústeres Cun soportados son capaces de restringir la sobreoxidación en presencia de nuevas moléculas de O2, evitando así la formación de especies Cun-4O, lo cual puede aprovecharse para estabilizar un sistema catalítico bajo condiciones oxidantes a la vez que se mantiene un estado de oxidación metálico. Para la activación de CH4, solo el escenario con 2 átomos de Al fue contemplado. El mecanismo de reacción descubierto es análogo al encontrado en fase gas, con energías de activación de Gibbs menores a 115 kJ·mol-1 siendo similares a las vistas experimentalmente para las zeolitas de Cu intercambiado junto a una gran importancia de los estados mayores de spin, que mejoran la transferencia de H desde el metano al O bicoordinado estabilizado en el clúster. El Cu5 es capaz de convertir metano en metanol mientras evita la generación de especies CH2 y la bicoordinación de los metilo en contraposición al Cu7, el cual ofrece una alternativa peor en casi todos los aspectos. Además, los clústeres de Cu5 abren la posibilidad de producir nuevos productos como el formaldehído o el DME cuando se generan especies metoxilo en el clúster, aportando valor añadido al proceso. Por último, se estudiaron sistemas SAPO-34 y MeAPO-34 con dos átomos metálicos (Zn, Fe, Mg, Ti, Zr y Sn) para descubrir sistemas zeotipo que promuevan mejores propiedades catalíticas y unos mecanismos de reacción dirigidos a la producción de metanol. Considerando los resultados anteriores, solo se exploró la reactividad del Cu5. Estos sistemas se rigen por los mismos principios que el modelo SSZ-13, obteniendo tendencias muy similares en la carga total positiva de los cobres y en la densidad electrónica localizada en los átomos de O, las cuales varían dependiendo del metal seleccionado. No obstante, se obtuvieron mejoras en las barreras energéticas de activación para la disociación de O2 excepto para los casos del Si y el Mg, con valores entre los 34 y los 111 kJ·mol-1. Se encontraron dos candidatos capaces de realizar óptimamente la reacción MTM en comparación con el modelo SSZ-13 con dos átomos de Al en el primer ciclo de reacción con un mecanismo ER: SAPO-34 y TiAPO-34, con perfiles energéticos de Gibbs por debajo de los 80 kJ·mol-1. De hecho, el TiAPO-34 resultó el sistema más prometedor consiguiendo esto a pesar de formar un metilo bicoordinado junto a la menor energía de desorción de metanol encontrada en esta tesis, 21 kJ·mol-1. Además de evitar la producción de especies Cu5-4O al igual que la SSZ-13, el TiAPO-34 mejora las energías relativas de Gibbs con sistemas de Cu5-3O., [CA] S'investigà la reacció de metà a metanol (MTM) en zeolites i zeotips utilitzant clústers subnanométrics de coure suportats usant com oxidant O2 i sense la intervenció de molècules d'aigua en tot moment. Per començar, es realitzà en clústers aïllats de Cu5 i Cu7 per descobrir els principals camins de reacció i així identificar els principals problemes que poden ocórrer en cada etapa de la reacció. Es trobà que la reacció transcorre eficientment a través d'un mecanisme Eley-Rideal quan existixen àtoms d'O bicoordinats estabilitzats en les aristes dels clústers, conduint a menors barreres d'activació. No obstant, l'absorció del grup metil i la formació de grups metoxil en els clústers és inevitable, cosa que és un important obstacle pel procés. A continuació s'utilitzà el model zeolític SSZ-13 per suportat els clústers i vore si quan estos es troben confinats en les cavitats d'una zeolita amb quantitats variables de Al, este sistema catalític pot paliar els problemes relacionats amb els camins secundaris i l'absorció dels metil. Les simulacions en la dissociació d'O2 llançaren un increment en la càrrega total positiva dels clústers Cun conforme al nombre d'àtoms de Al en la matriu zeolítica i que una major concentració de densitat de càrrega sobre els àtoms de O facilita este pas. Així mateix, els clústers Cun suportats són capaços de restringir la sobreoxidació en presència de noves molècules d'O2, evitant així la formació d'espècies Cun-4O, cosa que pot aprofitar-se per a estabilitzar un sistema catalític baix condicions oxidants a la volta que es manté un estat d'oxidació metàl·lic. Per a l'activació de CH4, sols l'escenari amb 2 àtoms de Al va ser contemplat. El mecanisme de reacció descobert és anàleg al trobat en fase fas, amb energies d'activació de Gibbs menors a 115 kJ·mol-1 sent similars a les vistes experimentalment per a les zeolites de Cu intercanviant junt amb una gran importància dels estats majors de spin, que milloren la transferència de H des del metà al O bicoordinat estabilitzat en el clúster. El Cu5 és capaç de convertir metà en metanol mentre evita la generació d'espècies CH2 i la bicoordinació dels metil en contraposició al Cu7, el qual oferix una alternativa pitjor en quasi tots els aspectes. A més, els clústers de Cu5 obtín la possibilitat de produir nous productes com el formaldehid o el DME quan es generen espècies metoxil en el clúster, aportant valor afegit al procés. Per últim, s'estudiaren sistemes SAPO-34 i MeAPO-34 amb dos àtoms metàl·lics (Zn, Fe, Mg, Ti, Zr i Sn) per descobrir sistemes zeotip que promouen millors propietats catalítics i uns mecanismes de reacció dirigits a la producció de metanol. Considerant els resultats anteriors, sols s'explorà la reactivitat del Cu5. Estos sistemes es rigen pels mateixos principis que el model SSZ-13, obtenint tendències molt similars en la càrrega total positiva dels coures i en la densitat electrònica localitzada en els àtoms d'O, les quals varien depenent del metal seleccionat. No obstant, s'obtingueren millores en les barreres energètiques d'activació per la dissociació d'O2 excepte pels casos del Si i el Mg, amb valors entre els i els 111 kJ·mol-1. Es trobaren dos candidats capaços de realitzar òptimament la reacció MTM en comparació amb el model SSZ-13 amb dos àtoms de Al en el primer cicle de reacció amb un mecanisme ER: SAPO-34 i TiAPO-34, amb perfils energètics de Gibbs per sota dels 80 kJ·mol-1. De fet, el TiAPO-34 resultà el sistema més prometedor aconseguint açò a pesar de formar un metil bicoordinat junt amb la menor energia de desorció de metanol encontrada en esta tesi, 21 kJ·mol-1. A més d'evitar la producció d'espècies Cu5-4O igual que la SSZ-13, el TiAPO-34 millora les energies relatives de Gibbs amb sistemes de Cu5-3O., [EN] The catalytic behaviour of sub-nanometre copper clusters was investigated in the methane to methanol (MTM) reaction supported in zeolites and zeotypes using O2 as oxidant with no water molecules assisting the process. To begin with, the research was conducted on isolated Cu5 and Cu7 clusters in order to settle the main pathways involved in this complex reaction and to identify the main problems in each step of the reaction. It was found that the reaction can effectively proceed through an Eley-Rideal mechanism when bicoordinated oxygen atoms are stabilised at the edges of the clusters, involving relatively low activation energy barriers. However, the adsorption of the methyl group and the formation of methoxy groups on the clusters are inevitable, which entails a significant obstacle to the process. Next, an SSZ-13 zeolite model was selected as support for the copper clusters to explore whether when the clusters are confined within the cavities of an Al-containing zeolite, this catalytic system can relieve the issues encountered in isolated systems. The O2 dissociation simulations reported an increase in the total positive charge on the Cun clusters with the number of Al atoms in the zeolite framework and a more concentrated electron density over the O atoms that facilitates the dissociation step. Additionally, supported Cun clusters restrain deep oxidation in presence of new O2 molecules evading the formation of Cun-4O species, which can be exploited to stabilise a catalytic system under oxidising conditions while preserving a metallic oxidation state. For CH4 activation, only the scenario with 2 Al atoms was contemplated. The uncovered reaction mechanism is analogous to the one found in gas phase with Gibbs activation barriers less than 115 kJ·mol-1 as those reported experimentally for Cu-exchanged zeolites along with a remarkable importance of higher spin states that enhance the H transfer step from the methane to the anchored O atom on the cluster. Cu5 is able to transform methane into methanol while avoiding the generation of CH2 species and the bi-coordination of methyl groups in contrast to Cu7, which offers a worse alternative in almost every aspect. In addition, Cu5 clusters open the possibility to generate new chemicals like formaldehyde and DME when methoxy species are generated on the cluster, providing added value to the process. Lastly, SAPO-34, and MeAPO-34 models with two metal atoms (Me: Zn, Fe, Mg, Ti, Zr and Sn) were explored to foster better catalytic properties and more optimised mechanistic insights for the production of methanol. Considering the results above, only Cu5 clusters were studied. These zeotype systems follow the same principles as the SSZ-13 in reference to the total positive charge of copper atoms and more localised electron density on O atoms which vary depending on the selected metal. However, improvements on the O2 dissociation activation barriers were found except for the Si and Mg zeotypes, with values ranging from 34 to 111 kJ·mol-1. The CH4 activation in these systems resulted as reported above, an ER reaction path that cannot evade the adsorption of methyl groups; but in which two candidates were found to be more efficient than the SSZ-13 with two Al atoms in terms of a lower Gibbs energy profile for the first cycle: SAPO-34 and TiAPO-34 zeotypes, being both of them below 80 kJ·mol-1. In fact, the TiAPO-34 turned out to be the most promising system since it achieves these results despite the formation of a bicoordinated methyl group along with the lowest methanol desorption energy reported in this dissertation, 21 kJ·mol-1. To further explore the TiAPO-34 system, additional oxidation simulations were carried out, confirming the catalytic system avoids the production of Cu5-4O species just as reported in the zeolite model. The resultant Cu5-3O is alike to the one reported in SSZ-13, improving the Gibbs relative energies., Este trabajo ha sido posible gracias al Instituto de Tecnología Química (ITQ), el cual me proporcionó la beca predoctoral (PRE2018-083547) que me permitió desarrollar esta tesis doctoral en el programa Severo Ochoa (SEV-2016-0683). También quiero agradecer a la Red Española de Supercomputación (RES), y al Centro de Cálculo de la Universitat de València por brindarme los recursos computacionales y a la Unión Europea y al Gobierno de España por la financiación para realizar este trabajo a través de los proyectos MAT2017-82288-C2-1-P (AEI/ UE), MCIN PID2020-112590GB-C21, CEX2021-001230-S y TED2021-130739B-I00 (MCIN/AEI/FEDER, UE)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Ab initio design of efficient zeolite catalysts for methanol and hydrocarbons conversion

  • Ferri Vicedo, Pau
[ES] Toda esta disertación ha utilizado la química computacional como herramienta fundamental para el análisis científico. Por ello, en el Capítulo 2 se explican los modelos y métodos teóricos sobre este tema. La primera parte del capítulo se centra en los fundamentos de la química cuántica y, en concreto, se explica con detalle la Teoría del Funcional de la Densidad la cual constituye la base de los métodos computacionales aplicados. En esta sección, las nociones básicas del método Hartree-Fock sirven de prólogo a la DFT. El Capítulo 3 presenta los primeros resultados de este trabajo correspondientes a la reacción de metanol a olefinas catalizada por diferentes zeolitas con cavidades de poro pequeño. Esta reacción es un proceso industrial relevante que produce olefinas de cadena corta como eteno (C2=), propeno (C3=) y buteno (C4=) a escala industrial a partir de la biomasa. El sistema catalítico comprende tanto la estructura inorgánica de la zeolita que contiene los sitios ácidos Brønsted como las especies orgánicas confinadas, que forman la "hydrocarbon pool" y producen olefinas ligeras mediante pasos sucesivos de metilación y craqueo. Hemos centrado nuestros esfuerzos en comprender la naturaleza de la "hydrocarbon pool", una molécula de benceno polimetilada, y sus mecanismos de reacción para poder discernir entre ellos e identificar los catalizadores adecuados para mejorar la producción de propeno o eteno en función de la topología de cada cavidad zeolitica. Hemos podido identificar el grado de metilación de la "hydrocarbon pool" como el factor clave para potenciar el mecanismo de la ruta "paring", donde el propeno es el producto mayoritario, o el mecanismo de la ruta "side-chain", siendo el eteno el producto predominante. Este hallazgo nos permite establecer una relación entre la estabilización de los dos intermedios clave y la selectividad experimental observada con un alto grado de correlación. En el Capitulo 4 presentamos una nueva herramienta para el estudio de reacciones competitivas catalizadas por zeolitas. Utilizando un cribado computacional rápido con "force fields" para los intermedios clave de la reacción y un detallado estudio mecanístico usando la teoría del funcional de la densidad somos capaces de reconocer y cuantificar sutiles diferencias en la estabilización de intermedios y estados de transición dentro de huecos microporosos similares, aproximándonos así al nivel de reconocimiento molecular de las enzimas. Con estas herramientas somos capaces de seleccionar como catalizador una zeolita que obstaculice el mecanismo "alkyl-transfer" reduciendo la producción de eteno no deseado y potenciando al mismo tiempo el mecanismo "diaryl-mediated pathway". También somos capaces de obstaculizar la desproporción de dietilbenceno, una ruta no deseada del mecanismo "diaryl-mediated pathway" que conduce a la producción de trietilbenceno, mientras que se favorece la transalquilación de dietilbenceno aumentando el rendimiento obtenido de etilbenceno. en la primera sección del Capítulo 5, estudiamos la afinidad energética de cationes alquilamonio comercialmente disponibles con ligeras diferencias en sus grupos alquilo, TEA, MTEA y DMDEA, para la síntesis de CHA y sus efectos sobre la calidad del material obtenido. Evaluamos las energías de interacción entre la zeolita y el catión de diferentes combinaciones de agentes directores y cationes Na+ con métodos DFT periódicos pudiendo distinguir pequeños efectos de estabilización causados por ligeras diferencias estructurales entre moléculas que repercuten en la estructura final sintetizada. Durante la segunda sección del Capítulo 5, identificamos las características estructurales de diferentes agentes directores de estructura para la síntesis de AEI que mejoran las probabilidades de dispersión del Al en posiciones tetraédricas distintas de T1 obteniendo un catalizador AEI diferente de los sintetizados clásicamente., [CA] Tota aquesta dissertació utilitza la química computacional com eina fonamental per a l'anàlisi científica. Per això, en el Capítol 2 s'expliquen els models i mètodes teòrics sobre aquest tema. La primera part del capítol es centra en els fonaments de la química quàntica i, en concret, s'explica amb detall la Teoria del Funcional de la Densitat la qual constitueix la base dels mètodes computacionals aplicats. En aquesta secció, les nocions bàsiques del mètode Hartree-Fock serveixen de pròleg a la DFT. El Capítol 3 presenta els primers resultats d'aquest treball corresponents a la reacció de metanol a olefines catalitzada per diferents zeolites amb cavitats de porus petit. Aquesta reacció és un procés industrial rellevant que produeix olefines de cadena curta com etè (C2=), propè (C3=) i butè (C4=) a escala industrial a partir de la biomassa. El sistema catalític comprèn tant l'estructura inorgànica de la zeolita que conté els llocs àcids Brønsted com les espècies orgàniques confinades, que formen la "hydrocarbon pool" i produeixen olefines lleugeres mitjançant passos successius de metilació i craqueig. Hem centrat els nostres esforços en comprendre la naturalesa de la "hydrocarbon pool", una molècula de benzè polimetilada, i els seus mecanismes de reacció per a poder discernir entre ells i identificar els catalitzadors adequats per millorar la producció de propè o etè en funció de la topologia de cada cavitat zeolitica. Hem pogut identificar el grau de metilació de la "hydrocarbon pool" com el factor clau per a potenciar el mecanisme de la ruta "paring", on el propè és el producte majoritari, o el mecanisme de la ruta "side-chain", sent l'etè el producte predominant. Al Capítol 4 presentem una nova eina per a l'estudi de reaccions competitives catalitzades per zeolites. Utilitzant un cribratge computacional ràpid amb "force fields" per als intermedis clau de la reacció i un detallat estudi mecanístic amb la teoria del funcional de la densitat som capaços de reconèixer i quantificar subtils diferències en l'estabilització d'intermedis i estats de transició dins de buits microporosos similars, aproximant-nos així al nivell de reconeixement molecular dels enzims. en la primera secció del Capítol 5, estudiem l'afinitat energètica de cations alquilamoni comercialment disponibles amb lleugeres diferències als seus grups alquil, TEA, MTEA i DMDEA, per a la síntesi de CHA i els seus efectes sobre la qualitat del material obtingut. Avaluem les energies d'interacció entre la zeolita i el catió entre diferents combinacions d'agents directors i cations Na+ amb mètodes DFT periòdics podent distingir petits efectes d'estabilització causats per lleugeres diferències estructurals entre molècules que repercuteixen en l'estructura final sintetitzada. Durant la segona secció del Capítol 5, identifiquem les característiques estructurals de diferents agents directors d'estructura per a la síntesi d'AEI que milloren les probabilitats de propagació de l'Al a través de posicions tetrahedriques diferents de T1 obtenint un catalitzador AEI diferent dels sintetitzats clàssicament., [EN] Computational chemistry has been used as the fundamental tool during the whole work. Therefore, the theoretical models and methods on this subject are explained in Chapter 2. The first part sketches the fundamentals of quantum chemistry and specifically explains the Density Functional Theory that constitutes the basis of the computational methods applied. In this section, basic notions of the Hartree-Fock method serve as prologue for DFT after which more practical aspects are elucidated. Chapter 3 presents the first results of this work corresponding to the methanol to olefins reaction catalysed by different small-pore cage-like zeolites. This reaction is a relevant process that produces short chain olefins such as ethene, propene and butene at industrial scale from biomass. The catalytic system comprises both the zeolite inorganic framework containing the Brønsted acid sites and the confined organic species, that form the hydrocarbon pool and produce light olefins by successive methylation and cracking steps. Our efforts are focused on understanding the nature of the hydrocarbon pool, a polymethylated benzene molecule, and its reaction mechanisms in order to be able to discern between them and identify the proper catalysts to enhance propene or ethene production based on each zeolite cavity topology. We have been able to identify the hydrocarbon pool methylation degree as the key factor to enhance paring route mechanism where propene is the predominant product, or side-chain mechanism, with ethene being the predominant product. This finding enables us to establish a relation between the stabilization of the two key intermediates and the experimental selectivity observed with a high degree of correlation. In Chapter 4 we present a new tool for the study of competing reactions catalyzed by zeolites. Using a fast computational screening with force fields for the key intermediates of the reaction and a detailed density functional theory mechanistic study we are able to recognize and quantify subtle differences in the stabilization of intermediates and transition states within similar microporous voids, thus approaching the level of molecular recognition of enzymes. With these tools we are able to select a zeolite catalyst that hinders alkyl-transfer mechanism reducing the production of non-desired ethene while enhancing the diaryl-mediated pathyways mechanism. Once we discard the non-desired mechanism, we are also able to hinder the diethylbenzene disproportionation, a non-desired route of the diaryl-mediated pathways that leads to triethylbenzene production, while favouring diethylbenzene transalkylation increasing the obtained yield of ethylbenzene. To close this chapter, the theoretical results are compared with experimental selectivities obtained for eight candidate zeolites obtaining a good correlation between theory and experiment. in the first section of Chapter 5, we study the energetic affinity of commercially available alkylammonium cations with slight differences on their alkyl chain groups, as TEA, MTEA and DMDEA, for CHA synthesis and its effects on the quality of the material obtained. We evaluate the host-guest interaction energies of different combinations of OSDAs and Na+ cations with periodic DFT methods being able to distinguish small stabilization effects caused by slight structural differences between molecules that have an impact on the final structure synthesized. On the other hand, we present a new theoretical methodology to address Al positioning prediction in SSZ-39 zeolite with the AEI framework. During the second section of Chapter 5, we identify the structural features of different OSDAs for AEI synthesis that improve the probabilities of spreading Al through different T-site positions other than T1 obtaining an AEI catalyst different from the classically synthesized., Vull agrair al Instituto de Tecnología Química per la concessió d’un contracte predoctoral, a la Red Española de Supercomputación (RES), al Centre de Càlcul de la Universitat de València, al Flemish Supercomputer Center (VSC) de la Ghent University pels recursos computacionals i el suport tècnic, a la Unió Europea i al Gobierno de España pel finançament d’aquest projecte a traves dels programes ERC-AdG-2014- 671093 (SynCatMatch) “Severo Ochoa” (SEV-2016-0683, MINECO) i dels projectes MAT2017-82288-C2-1-P i PID2020-112590GB-C21 (AEI/FEDER, UE), i al CSIC pel finançament de la estada al CMM a través del projecte i- Link (LINKA20381).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Computational study of heterogeneous catalytic systems. Kinetic and structural insights from Density Functional Theory

  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
[ES] En este trabajo estudiamos dos reacciones catalíticas relevantes para la industria y la localización del anión fluoruro en la zeolita RTH, sintetizada en medio fluoruro. El capítulo 3 es el primer capítulo de resultados, donde se estudia la reducción quimioselectiva del nitroestireno en las superficies Ni(111), Co(111), Cu(111) y Pd(111). El mecanismo generalmente aceptado de esta reacción está basado en el esquema propuesto por Haber en 1898, en el que la reacción puede transcurrir por dos rutas, la directa y la de condensación. En este capítulo exploramos ambas rutas, y observamos que la ruptura de los enlaces N-O y la consecuente formación de enlaces metal-O está más favorecida que la formación de enlaces N-H en las superficies Ni(111) y Co(111), debido al carácter oxofílico de ambos metales. Las etapas más lentas involucran la formación de enlaces N-H. En las superficies de metales nobles como Pt(111) y Pd(111) se observa el comportamiento contrario. La superficie Cu(111) es un caso intermedio comparado con los metales nobles y no nobles. Además, el nitroestireno interactúa con los átomos de Cu de la superficie solo a través de grupo nitro, con lo cual es un candidato ideal para alcanzar selectividades cerca del 100%. Sin embargo, la superficie Cu(111) no es capaz de activar la molécula de H2. En este sentido, proponemos un catalizador bimetálico basado en Cu, dopado con otro metal capaz de activar al H2, tales como el Pd o el Ni. En los capítulos 4 y 5 se ha estudiado la reducción catalítica selectiva de los óxidos de nitrógeno (SCR, en inglés) con amoníaco. Usando métodos de DFT, hemos encontrado rutas para la oxidación de NO a NO2, nitritos y nitratos con energías de activación relativamente bajas. También, hemos encontrado que la reducción de Cu2+ a Cu+ requiere la participación simultánea de NO y NH3. Posteriormente, hemos estudiado la influencia del NH3 en este sistema con métodos de dinámica molecular. El NH3 interacciona fuertemente con el Cu+ de forma que dos moléculas de este gas son suficientes para romper la coordinación del catión Cu+ con los oxígenos del anillo 6r, y formar el complejo lineal [Cu(NH3)2]+. Además, los cationes Cu2+ pueden ser estabilizados fuera de la red mediante la formación del complejo tetraamincobre(II). Debido a la presencia de los cationes Cu+ y Cu2+ coordinados a la red de la zeolita, aparecen bandas en la región entre 800-1000 cm-1 del espectro infrarrojo. El análisis de las frecuencias IR de varios modelos con Cu+ y Cu2+ coordinados al anillo 6r, o formando complejos con amoniaco indica que cuando los cationes Cu+ y Cu2+ están coordinados a los oxígenos del anillo 6r aparecen vibraciones entre 830 y 960 cm-1. Frecuencias en esta zona también se obtienen en los casos en que NO, NO2, O2 y combinaciones de dos de ellos están adsorbidos en Cu+ y Cu2+. Sin embargo, cuando los cationes Cu+ y Cu2+ están fuera del anillo (no hay enlaces entre los cationes de cobre y los oxígenos del anillo 6r) no se obtienen vibraciones de IR en esta región del espectro. Estos resultados indican que con el seguimiento del espectro IR durante la reacción SCR es posible determinar si los cationes Cu+ y Cu2+ están coordinados o no al anillo de 6r en las etapas de oxidación y reducción. Por último, hemos simulado el desplazamiento químico de 19F, δiso,, en la zeolita sintetizada RTH. El análisis del δiso de los distintos modelos utilizados nos ha permitido reconocer la simetría del material sintetizado, el cual pertenece al grupo espacial P1 y la nueva celda unidad ha sido confirmada experimentalmente por difracción de rayos X. Finalmente, hemos asignado la señal experimental que aparece en el espectro de 19F a -67.2_ppm, al F- localizado en un sitio T2, el cual es a su vez la posición más estable. Además, la señal a -71.8 ppm se ha asignado al anión F- localizado en un sitio T4., [CA] En aquest treball estudiem dues reaccions catalítiques rellevants per a la indústria i la localització de l'anió fluorur en la zeolita RTH, sintetitzada al mig fluorur. El capítol 3 és el primer capítol de resultats, on s'estudia la reducció quimioselectiva del nitroestireno en les superfícies Ni(111), Co(111), Cu(111) i Pd(111). El mecanisme generalment acceptat d'aquesta reacció està basat en l'esquema proposat per Haver-hi en 1898, en el qual la reacció pot transcórrer per dues rutes, la directa i la de condensació. En aquest capítol explorem totes dues rutes, i observem que la ruptura dels enllaços N-O i la conseqüent formació d'enllaços metall-O està més afavorida que la formació d'enllaços N-H en les superfícies Ni(111) i Co(111), a causa del caràcter oxofílico de tots dos metalls. Les etapes més lentes involucren la formació d'enllaços N-H. En les superfícies de metalls nobles com Pt(111) i Pd(111) s'observa el comportament contrari. La superfície Cu(111) és un cas intermedi comparat amb els metalls nobles i no nobles. A més, el nitroestireno interactua amb els àtoms de Cu de la superfície sol a través de grup nitre, amb la qual cosa és un candidat ideal per a aconseguir selectivitats prop del 100%. No obstant això, la superfície Cu(111) no és capaç d'activar la molècula d'H2. En aquest sentit, proposem un catalitzador bimetàl·lic basat en Cu, dopat amb un altre metall capaç d'activar a l'H2, com ara el Pd o el Ni. En els capítols 4 i 5 hem estudiat la reducció catalítica selectiva dels òxids de nitrogen (SCR, en anglés) amb amoníac. Usant mètodes de DFT, hem trobat rutes per a l'oxidació de NO a NO2, nitrits i nitrats amb energies d'activació relativament baixes. També, hem trobat que la reducció de Cu2+ a Cu+ requereix la participació simultània de NO i NH3. Posteriorment, hem estudiat la influència del NH3 en aquest sistema amb mètodes de dinàmica molecular. El NH3 interacciona fortament amb el Cu+ de manera que dues molècules d'aquest gas són suficients per a trencar la coordinació del catió Cu+ amb els oxígens de l'anell 6r, i formar el complex lineal [Cu(NH3)2]+. A més, els cations Cu2+ poden ser estabilitzats fora de la xarxa mitjançant la formació del complex tetraamincobre(II). A causa de la presència dels cations Cu+ i Cu2+ coordinats a la xarxa de la zeolita, apareixen bandes a la regió entre 800-1000 cm-1 de l'espectre infraroig. L'anàlisi de les freqüències IR de diversos models amb Cu+ i Cu2+ coordinats a l'anell 6r, o formant complexos amb amoníac indica que quan els cations Cu+ i Cu2+ estan coordinats als oxígens de l'anell 6r apareixen vibracions entre 830 i 960 cm-1. Freqüències en aquesta zona també s'obtenen en els casos en què NO, NO2, O2 i combinacions de dues d'ells estan adsorbidos en Cu+ i Cu2+. No obstant això, quan els cations Cu+ i Cu2+ estan fora de l'anell (no hi ha enllaços entre els cations de coure i els oxígens de l'anell 6r) no s'obtenen vibracions d'IR en aquesta regió de l'espectre. Aquests resultats indiquen que amb el seguiment de l'espectre IR durant la reacció SCR és possible determinar si els cations Cu+ i Cu2+ estan coordinats o no a l'anell de 6r en les etapes d'oxidació i reducció. Finalment, hem simulat el desplaçament químic de 19F, δiso, en la zeolita sintetitzada RTH. L'anàlisi del δiso dels diferents models utilitzats ens ha permés reconéixer la simetria del material sintetitzat, el qual pertany al grup espacial P1 i la nova cel·la unitat ha sigut confirmada experimentalment per difracció de raigs X. Finalment, hem assignat el senyal experimental que apareix en l'espectre de 19F a -67.2 ppm, al F- localitzat en un lloc T2, el qual és al seu torn la posició més estable. A més, el senyal a -71.8 ppm s'ha assignat a l'anió F- localitzat en un lloc T4., [EN] In this work, we have studied two heterogeneous catalytic reactions and the localization of the fluoride anion in the as-made RTH framework, synthesized in fluoride medium. The first results, included in chapter 3, correspond to the chemoselective reduction of nitrostyrene on different metal surfaces, i.e, Ni(111), Co(111), Cu(111) and Pd(111). Until very recently, the reduction of the nitro group was explained on the basis of the general mechanism proposed by Haber in 1898 where the reaction can follow two routes, the direct and condensation route. We have explored the relevant elementary steps of both routes and found that because of the oxophilic nature of Ni and Co, the steps involving the dissociation of N-O bonds and formation of metal-O bonds are significantly favored compared with the other steps on both metal surfaces. In addition, the most demanding steps in terms of energy involve the formation of N-H bonds. These findings are in contrast to those of noble metals such as Pt and Pd, where the opposite behavior is observed. The behavior of Cu(111) lies in between the aforementioned cases, and also no chemical bonds between the carbon atoms of the aromatic ring of nitrostyrene and the Cu(111) surface is formed. For this reason, it might be an ideal candidate to achieve nearly 100 % selectivity. However, the Cu(111) surface does not seem to activate the H2 molecule. In this regard, we propose a bimetallic Cu-based catalyst whose surface is doped with atoms of a H2-activating metal, such as Ni or Pd. On another matter, we have also investigated the selective catalytic reduction of nitrogen oxides (SCR-NOx) and the main results are presented in the following two chapters, 4 and 5. By using static DFT methods, we found pathways for the oxidation of NO to NO2, nitrites and nitrates with relatively low activation energies. We also found, in agreement with experimental reports, that the reduction of Cu2+ to Cu+ requires the simultaneous participation of NO and NH3. Later, molecular dynamics simulations allowed us to assess the influence of NH3. The strong interaction of NH3 with the Cu+ cation is evidenced by its ability to detach Cu+ from the zeolite framework and form the mobile linear complex [Cu(NH3)2]+. Cu+ is no longer coordinated to the zeolite framework in the presence of two NH3 molecules. This observation and the fact that the T-O-T vibrations of the framework produce bands in the 800-1000 cm-1 region of the IR spectrum when perturbed by the coordination of Cu+ and Cu2+ cations, indicate that bands in the 800-1000 cm-1 regions should be observed when both copper cations are bonded to the framework oxygens. Finally, we have also studied NMR properties of the as-made pure silica RTH framework, aiming at locating the compensating fluoride anion. The calculation of the 19F chemical shift in different T sites and comparison with the experimental NMR spectra shows that the as-made RTH belongs to the P-1 space group with 16 Si, 32 O atoms, one fluoride anion and one OSDA cation. These results have been confirmed experimentally by XRD. In addition, we have assigned the experimental signal of 19F at -67.2 ppm to the fluoride anion in a T2 site, which in turn is the most stable location found, and the signal of -71.8 ppm to a fluoride anion sitting in a T4 site., My acknowledgements to “La Caixa foundation” for the financial support through “La Caixa−Severo Ochoa” International PhD Fellowships (call 2015), to the Spanish Supercomputing Network (RES), to the Centre de Càlcul de la Universitat de València, to the Flemish Supercomputer Center (VSC) of Ghent University for the computational resources and technical support, and to the Spanish Government through the MAT2017-82288-C2-1-P programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Ab initio design of efficient zeolite catalysts for methanol and hydrocarbons conversion

  • Ferri, Pau
A dissertation submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy., In this work, we have studied two heterogeneous catalytic reactions and we have compared the behaviour of different organic directing agents when being used for zeolite synthesis. Since the various topics of this thesis are not related to each other, a general introduction about the whole subject is not provided. Instead, each topic is introduced independently in its corresponding chapter. The structure of this manuscript is outlined below. In Chapter 1, we provide an outline of the fundamental concepts of heterogeneous catalysis that will appear in the discussion of the results presented in chapters 3 to 5. A brief description of different zeolite topologies and their chemical compositions is also given. This chapter ends with some general comments on the motivation for this work. Computational chemistry has been used as the fundamental tool during the whole work. Therefore, the theoretical models and methods on this subject are explained in Chapter 2. The first part sketches the fundamentals of quantum chemistry and specifically explains the Density Functional Theory that constitutes the basis of the computational methods applied. In this section, basic notions of the Hartree-Fock method serve as prologue for DFT after which more practical aspects are elucidated, such as the concept of Potential Energy Surface and the techniques for its exploration. The fundamentals of ab initio molecular dynamics are also introduced towards the end of this chapter. To conclude, a general description of the different zeolite models used for is given. Chapter 3 presents the first results of this work corresponding to the methanol to olefins reaction catalysed by different small-pore cage-like zeolites. This reaction is a relevant process that produces short chain olefins such as ethene (C2=), propene (C3=) and butene (C4=) at industrial scale from biomass. The catalytic system comprises both the zeolite inorganic framework containing the Brønsted acid sites and the confined organic species, that form the hydrocarbon pool and produce light olefins by successive methylation and cracking steps. Our efforts are focused on understanding the nature of the hydrocarbon pool, a polymethylated benzene molecule, and its reaction mechanisms in order to be able to discern between them and identify the proper catalysts to enhance propene or ethene production based on each zeolite cavity topology. We have been able to identify the hydrocarbon pool methylation degree as the key factor to enhance paring route mechanism where propene is the predominant product, or side-chain mechanism, with ethene being the predominant product. This finding enables us to establish a relation between the stabilization of the two key intermediates and the experimental selectivity observed with a high degree of correlation. In another matter, we also investigate the nature of diethylbenzene transalkylation reaction and the main results are presented in Chapter 4. In this chapter we present a new tool for the study of competing reactions catalyzed by zeolites. Using a fast computational screening with force fields for the key intermediates of the reaction and a detailed density functional theory mechanistic study we are able to recognize and quantify subtle differences in the stabilization of intermediates and transition states within similar microporous voids, thus approaching the level of molecular recognition of enzymes. With these tools we are able to select a zeolite catalyst that hinders alkyl-transfer mechanism reducing the production of non-desired ethene while enhancing the diaryl-mediated pathyways mechanism. Once we discard the non-desired mechanism, we are also able to hinder the diethylbenzene disproportionation, a non-desired route of the diaryl-mediated pathways that leads to triethylbenzene production, while favouring diethylbenzene transalkylation increasing the obtained yield of ethylbenzene. To close this chapter, the theoretical results are compared with experimental selectivities obtained for eight candidate zeolites obtaining a good correlation between theory and experiment. Finally, during the las chapter we introduce new theoretical predictive tools based in DFT addressing two different topics of zeolite synthesis with OSDAs. On the one hand, in the first section of Chapter 5, we study the energetic affinity of commercially available alkylammonium cations with slight differences on their alkyl chain groups, as TEA, MTEA and DMDEA, for CHA synthesis and its effects on the quality of the material obtained. We evaluate the host-guest interaction energies of different combinations of OSDAs and Na+ cations with periodic DFT methods being able to distinguish small stabilization effects caused by slight structural differences between molecules that have an impact on the final structure synthesized. The conclusions of this study point towards MTEA as the best alkylammonium OSDA for CHA synthesis. To end this section, our theoretical predictions are tested with experimental synthesis of CHA samples using the alkylammonium OSDAs studied. The structural analysis of the samples obtained confirm that the synthesis using MTEA crystallizes in a perfect CHA material meanwhile the sample prepared with TEA presents GME intergrowths and DMDEA produces a LEV framework., On the other hand, we present a new theoretical methodology to address Al positioning prediction in SSZ-39 zeolite with the AEI framework. During the second section of Chapter 5, we identify the structural features of different OSDAs for AEI synthesis that improve the probabilities of spreading Al through different T-site positions other than T1 obtaining an AEI catalyst different from the classically synthesized with N,N-dimethyl-2,6-dimethylpiperidinium and N,N-dimethyl-3,5 dimethylpiperidinium. Studying the stabilization and mobility of different OSDA candidates inside AEI cavities with DFT methods, we arrive to the conclusion that if the AEI synthesis was conducted with the remarkably mobile 9,9-dimethyl-9-azabicyclo [3.3.1]nonane-9-ium, allowing the OSDA positive charge to round about all positions inside the cavity, an AEI catalyst with an Al distribution dispersed between T1 and T3 positions should be obtained., Quant a institucions, vull agrair al Instituto de Tecnología Química per la concessió d’un contracte predoctoral, a la Red Española de Supercomputación (RES), al Centre de Càlcul de la Universitat de València, al Flemish Supercomputer Center (VSC) de la Ghent University pels recursos computacionals i el suport tècnic, a la Unió Europea i al Gobierno de España pel finançament d’aquest projecte a traves dels programes ERC-AdG-2014-671093 (SynCatMatch) “Severo Ochoa” (SEV-2016-0683, MINECO) i dels projectes MAT2017-82288-C2-1-P i PID2020-112590GB-C21 (AEI/FEDER, UE), i al CSIC pel finançament de la estada al CMM a través del projecte i-Link (LINKA20381)., Peer reviewed