Pasar al contenido principal

SENSORES FOTONICOS ULTRASENSIBLES BASADOS EN NANORECUBRIMIENTOS

TEC2016-78047-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Contribución al desarrollo de sensores de gases basados en resonancias ópticas, Contribution to the development of gas sensors based on optical resonances

  • Vitoria Pascual, Ignacio
Los sensores basados en resonancias ópticas han incrementado su popularidad estos últimos años. Cobran especial relevancia en aplicaciones como la detección de gases gracias a su alta sensibilidad y robustez en ambientes agresivos. Esta tesis ha contribuido a la mejora de sensores de gases basados en resonancias ópticas empleando dos enfoques; la búsqueda de materiales sensibles a gases y el desarrollo de nuevas técnicas de interrogación. Los materiales investigados están formados por una matriz polimérica con materiales nanoestructurados: nanopartículas de óxido tungsteno, nanodiamantes y nanosheets de óxido de grafeno. Las propiedades de estos materiales son testeadas ante diferentes gases e índices de refracción externo (surrouding refractive index SRI). En la búsqueda de sensores ultrasensibles al SRI, se desarrollan dos líneas de investigación. Una estudia el efecto LMR y su sensibilidad en la región de infrarrojo medio (MIR) empleando fibras ópticas fluoradas y TiO2 como material. La otra, se centra en resonancias acuñadas por primera como surface exciton polariton resonance (SEPR) basándose en el efecto long range surface exciton polariton (LRSEP). Para ello se desarrolla un sensor en configuración Kretschmann-Raether con dos películas de Cr y MgF2. También se estudia los papeles de los distintos parámetros del sensor, así como experimentalmente la sensibilidad al ángulo de incidencia y SRI., Sensors based in optical resonances have increased their popularity in the last years. The ones used in gas measurement applications are especially relevant, due to their high sensitivity and robustness to harsh environments. This thesis has contributed to the improvement of gas sensors based in optical resonances employing two approaches: the search for gas-sensitive materials and the development of new interrogation techniques. The researched materials are composed by a polymeric matrix and nanostructured materials: tungsten oxide nanoparticles, nanodiamonds and graphene oxide nanosheets. The properties of these materials are studied with different gas concentrations and surrounding refractive indexes (SRI). Two research lines are developed to obtain ultrasensitive sensors to SRI. The first one studies the LMR effect and its sensitivity in the mid infrared (MIR) region, employing fluoride glass optical fibers and TiO2 as material. The second one focuses on the resonances coined for the first time as surface exciton polariton resonances (SEPR) that are based on the long range surface exciton polariton (LRSEP) effect. A sensor in a Krestchmann-Raether configuration is developed with two films of Cr and MgF2. The roles of the different parameters of the sensor are studied theoretically as well as the experimental sensitivity to the incident angle and SRI., Instituto de Smart Cities de la Universidad Pública de Navarra (Contratos Pre-doctorales adscritas a Grupos e Institutos de Investigación de la Universidad Pública de Navarra); Ministerio de Ciencia e Innovación (PID2019-106231RB-I00 TEC); Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R); convocatoria ATTRACT financiada por el programa de investigación e innovación Horizon 2020 de la Unión Europea (subvención No 777222); Universidad Pública de Navarra (PJUPNA26)., Programa de Doctorado en Ciencias y Tecnologías Industriales (RD 99/2011), Industria Zientzietako eta Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Materials for the fabrication of optical fiber refractometers based on lossy mode resonance

  • Ozcariz Celaya, Aritz
Lossy mode resonances (LMR) have been studied as an exceptional phenomenon for the development of optical fiber refractometers. These sensors rely on the interaction of the light propagating through the waveguide with a thin-film fabricated onto it. The properties of such film will determine the sensitivity of the LMR to surrounding refractive index variations. The nature of the film will also play an important role on the possibilities to develop sensing applications. This thesis analyzes the use of four different materials (tin oxide, aluminum-doped zinc oxide, indium-gallium-zinc oxide and copper oxide) for the development of LMR-based refractometers. First, the optimization on the fabrication process of tin oxide coatings is described, with the purpose of maximizing the sensitivity in a refractive index range close of the fused silica (1.44). Then, materials based on zinc oxide are presented for the first time for the fabrication of LMR-based sensors: aluminum-doped zinc oxide (AZO) and indium-gallium-zinc oxide (IGZO), leading to the development of several sensors working in the visible and near-infrared wavelength range. The last material analyzed in this work is copper oxide, which presents a refractive index considerably larger than the previously studied materials. Such feature is suggested to provide a greater sensitivity of the LMR to SRI variations, promising a better performance than the one achieved with different thin-films., The author would like to thank the Spanish Ministry of Universities (FPU15/05663 grant), as well as the Ministry of Economy, Industry and Competitiveness (TEC2016-78047-R) and the Government of Navarra (Bioptsens Avanza) for their financial support., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Design and fabrication of novel optical fiber architectures for sensing applications, Diseño y fabricación de nuevas arquitecturas en fibra óptica para aplicaciones de sensado

  • Imas González, José Javier
Los sensores de fibra óptica han experimentado un importante progreso en los últimos años con el empleo de estructuras basadas en redes de Bragg, interferómetros o resonancias electromagnéticas, entre otras y el desarrollo de la nanotecnología, que ha permitido la deposición de recubrimientos a nivel micro y nanométrico sobre la fibra. Estos avances han posibilitado la fabricación de sensores de fibra óptica para medir variables físicas, parámetros químicos o aplicaciones de biosensado. Esta tesis contribuye al análisis y optimización, tanto teórica como experimental, de diferentes configuraciones y estructuras en fibra óptica, aplicadas al desarrollo de sensores. En esta tesis se estudian varias estructuras, incluidas las Lossy Mode Resonances (LMRs) y redes en fibra óptica: FBGs (redes de Bragg en fibra), LPGs (redes de período largo en fibra) y TFBGs (redes de Bragg inclinadas en fibra). Las principales líneas de investigación que se presentan en esta tesis son la fabricación de dispositivos multisensores basados en LMRs y la mejora del fenómeno de la mode transition en redes de fibra óptica: LPGs en fibras con doble cladding y TFBGs. El elemento común entre ambas líneas de investigación es el empleo de películas delgadas de materiales de alto índice de refracción: óxido de estaño (SnO2), óxido de indio y estaño (ITO) y dióxido de titanio (TiO2). Los resultados mostrados en esta tesis revelan el potencial de combinar varias estructuras y/o fenómenos en fibras ópticas para mejorar el desempeño de los sensores de fibra óptica., Optical fiber sensors have experienced an important progress in recent years with the employment of structures based on gratings, interferometers or electromagnetic resonances, among others; and the development of nanotechnology, that has enabled the deposition of coatings at the micro- and nanometric level on the fiber. These advances have allowed the manufacture of optical fiber sensors for measuring physical variables, chemical parameters or biosensing applications. This thesis contributes to the analysis and optimization, both theoretical and experimental, of different configurations and structures in optical fiber, applied to the development of sensors. Several structures are studied in this thesis, including Lossy Mode Resonances (LMRs) and optical fiber gratings: FBGs (fiber Bragg gratings), LPGs (long period fiber gratings) and TFBGs (tilted fiber Bragg gratings). The main research lines that are presented in this thesis are the fabrication of multisensing devices based on LMRs and the enhancement of the mode transition in optical fiber gratings: LPGs in double clad fibers and TFBGs. The common element between both research lines is the employment of thin films of high refractive index materials: tin oxide (SnO2), indium tin oxide (ITO) and titanium dioxide (TiO2). The results shown in this thesis reveal the potential of combining several structures and/or phenomena in optical fibers to improve the performance of optical fiber sensors., El desarrollo de esta tesis ha sido posible gracias al apoyo financiero del Ministerio de Universidades (beca FPU18/03087), el Ministerio de Ciencia e Innovación (PID2019-106231RB-I00 TEC), el Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R), la convocatoria ATTRACT financiada por el programa de investigación e innovación Horizon 2020 de la Unión Europea (subvención No 777222) y la Universidad Pública de Navarra (PJUPNA26)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Optimization of fiber optic biosensors based on lossy mode resonances, Optimización de biosensores de fibra óptica basados en resonacias de modos con pérdidas

  • Santano Rivero, Desiree
Este trabajo de tesis se centra en el desarrollo y la optimización de biosensores de fibra óptica basados en resonancia de modos con pérdidas (lossy mode resonances, LMR). Tras un análisis exhaustivo de la situación actual, donde se describen y comparan los diferentes tipos de biosensores de fibra óptica entre sí en base a parámetros como sensibilidad, FoM, FMHW y LoD, se desarrollaron diferentes biosensores basados en LMR. Se trabajó con tres estructuras ópticas diferentes: multimodo sin nucleo multimodo o multimode coreless multimode (MCM), fibra de 200 μm sin cladding y fibra tipo D. En ellas se generaron LMRs a través de dos técnicas de deposición de películas delgadas, oxido de estaño mediante sputtering y TiO2/PSS mediante layer by layer sefl asembly. Se demostró la viabilidad de los biosensores basados en LMR desarrollados con las diferentes estructuras de fibra óptica. Con ellos, se pudo detectar biomarcadores de importancia clínica como el biomarcador del Alzheimer proteína Tau o biomarcadores de gravedad durante la infección Covid19: las proteínas C reactiva y dímero D. Además, estas estructuras han permitido implementar optimizaciones sobre biosensores de fibra óptica como el desarrollo de biosensores reutilizables, regenerables y multiparamétricos., This thesis work focuses on the development and optimization of fiber optic biosensors based on lossy mode resonances (LMRs). Following a comprehensive analysis of the current situation, where different types of fiber optic biosensors are described and compared based on parameters such as sensitivity, FoM, FMHW, and LoD, various LMR-based biosensors were developed. Three different optical structures were employed: multimode coreless multimode (MCM), 200 μm multimode fiber, and D-shaped fiber. LMRs were generated in these structures using two thin film deposition techniques: tin oxide via sputtering and TiO2/PSS via Layer-by-Layer self-assembly. The viability of the LMR-based biosensors developed with the different fiber structures was demonstrated. These biosensors enabled the detection of clinically relevant biomarkers such as the Alzheimer's biomarker Tau protein or severity biomarkers during Covid19 infection, C-reactive protein, and D-dimer. Furthermore, these structures have allowed for the implementation of optimizations on fiber optic biosensors such as the development of reusable, regenerable, and multiparametric biosensors., Aportaciones económicas recibidas: Universidad Pública de Navarra (UPNA) a través de la beca predoctoral y proyectos como: PJUPNA1936, PJUPNA2033, patrocinio de la UPNA y del Ministerio de Ciencia e Innovación (proyectos con referencias: TEC2016-78047-R, PID2019-106231RB-I00). También proyecto concedido por el Gobierno de Navarra, 011-1365-2020-000061 Breathalyser, y financiación otorgada por la comisión Europea a través del proyecto H2020-ATTRACT-OBUS., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa Ofiziala (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Optimización de dispositivos en fibra óptica basados en resonancias de modos con pérdidas para aplicaciones en biosensores, Optimization of lossy mode resonance optical fiber devices for biosensing applications

  • Zubiate Orzanco, Pablo
El desarrollo de los sensores en fibra óptica combinado con el avance de la nanotecnología ha proporcionado una excelente oportunidad para el desarrollo de nuevas plataformas sensoras ópticas portátiles, ligeras y de alto rendimiento capaces de realizar detección in situ y en tiempo real. Esta tesis quiere contribuir al avance de la tecnología de los sensores ópticos basados en resonancias de modos con pérdidas (LMRs, por sus siglas en inglés), mejorando el rendimiento de dichos dispositivos, para luego detectar biomarcadores específicos que permitan un diagnóstico selectivo y precoz de diferentes enfermedades. En este trabajo, los LMRs generados en una fibra de tipo D permiten medir los cambios en el índice de refracción externo con una sensibilidad muy alta. En consecuencia, es posible detectar concentraciones muy bajas de analito en muestras de suero. Los resultados mostrados en esta tesis revelan el potencial de los sensores basados en LMRs para desempeñar un papel fundamental en el ámbito biomédico., The development of optical fiber sensors combined with the utilization of nanotechnologies have provided an excellent opportunity for developing portable, lightweight and high-performance optical sensing platforms for in-situ and real time detection. This thesis aims to contribute to the evolution of optic sensors based on Lossy Mode Resonances (LMRs). By improving the performance of these devices it is possible to detect specific biomarkers associated to different diseases, allowing a first diagnosis at a very early stage. The generation of Lossy Mode Resonances by means of D-shaped optical fibers makes it possible to measure surrounding refractive index changes with very high sensitivity. Consequently, it is possible to detect very low analyte concentrations in serum samples. The results shown in this thesis reveals in a tangible way the potential of optical sensors based on LMR to play a fundamental role in the biomedical field., The development of this work has been possible thanks to the economic efforts made by the Public University of Navarra (UPNA) and by the sponsoring of the Spanish Ministry of Economy and Competitiveness, through the investment in the following projects: CYCIT FEDER TEC2013-43679-R and TEC2016-78047-R. This work also supported by the Goverment of Navarre through the Project with reference PC023-024 BIOPTSENS, by the health department of the Government of Navarra with reference 64/2015 and by Fundación CAN trough the project CAN2015-70221., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)