Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multicellular feedback control of a genetic toggle-switch in microbial consortia

  • Fiore, Davide
  • Salzano, Davide
  • Cristòbal-Cóppulo, Enric
  • Olm Miras, Josep Maria
  • di Bernardo, Mario
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We describe a multicellular approach to control a target cell population endowed with a bistable toggle-switch. The idea is to engineer a synthetic microbial consortium consisting of three different cell populations. In such a consortium, two populations, the Togglers, responding to some reference input, can induce the switch of a bistable memory mechanism in a third population, the Targets, so as to activate or deactivate some additional functionalities in the cells. Communication among the three populations is established by orthogonal quorum sensing molecules that are used to close a feedback control loop across the populations. The control design is validated via in-silico experiments in BSim, a realistic agent-based simulator of bacterial populations., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Current-limited suboptimal sliding mode control for voltage-regulated synchronous buck converters

  • Ramos Lara, Rafael Ramón
  • Repecho del Corral, Víctor
  • Biel Solé, Domingo
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes a new sliding mode control based on a non-linear switching surface that provides a suboptimal current-limited start-up response in step-down converters. The main idea behind the design consists in combining different switching surfaces. The first one forces the system trajectories to track a constant current path until the output voltage error is small. A non-singular terminal switching surface then drives the trajectories to the vicinity of the steady state operating point. Finally, a first order switching surface regulates the steady state providing very good rates of load and line regulation. The paper presents the design guidelines of the suboptimal sliding mode control and the experimental evaluation that confirms the effectiveness of the proposal., This work was partially supported by the Government of Spain through the Agencia Estatal de Investigacion´ Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Digital control of multiphase series capacitor buck converter prototype for the powering of HL-LHC inner triplet magnets

  • Ibarra Basabe, Edorta
  • Arias Pujol, Antoni
  • Martínez de Alegría, Iñigo
  • Otero, Alberto
  • de Mallac, Louis
©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A major upgrade will be conducted in the Large Hardon Collider (LHC) at CERN. This high-luminosity (HL) version of the LHC will increase the nominal luminosity by a factor of five. One of the key technologies of the HL-LHC is the new superconducting inner triplet (IT) magnets, responsible of producing high magnetic fields to focus particle beams. To power the IT magnets from the grid, a multistage power supply with an intermediate 24-V battery pack is being considered. In such topology, a low-voltage high-current dc/dc converter operating with a very high step-down ratio is required for the final conversion stage. In this work, an interleaved multiphase series capacitor buck converter is proposed to feed the IT magnets from the battery pack. A novel voltage regulation approach that ensures the current balance between the paralleled series capacitor cells is also proposed, where one cell is responsible for the output voltage regulation, while the remaining cells are current-regulated. A balanced current sharing between the series capacitor cells is achieved, when the current-controlled cells are referenced by the actual current of the first one. The proposal is theoretically analyzed and experimentally validated in a six-cell 1000-A prototype unit., This work was supported in part by the HL-LHC project by the CERN and APERT (UPV/EHU) “Collaboration in the Study of Power Converter Topologies for Inner Triplet magnets with Energy Recovery in the framework of the High Luminosity upgrade for the LHC at CERN,” in part by the Government of the Basque Country within the fund for research groups of the Basque University system under Grant IT978-16, in part by the Government of Spain through the Agencia Estatal de Investigación under Project DPI2017-85404-P, and in part by the Generalitat de Catalunya under Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An adaptive observer-based controller design for active damping of a DC network with a constant power load

  • Machado, Juan E.
  • Ortega, Romeo
  • Astolfi, Alessandro
  • Arocas Pérez, José
  • Pyrkin, Anton A.
  • Bobtsov, Alexey
  • Griñó Cubero, Robert
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article explores a nonlinear, adaptive controller aimed at increasing the stability margin of a direct-current (dc), small-scale, electrical network containing an unknown constant power load (CPL). Due to its negative incremental impedance, this load reduces the effective damping of the network, which may lead to voltage oscillations and even to voltage collapse. To overcome this drawback, we consider the incorporation of a controlled dc-dc power converter in parallel with the CPL. The design of the control law for the converter is particularly challenging due to the existence of unmeasured states and unknown parameters. We propose a standard input-output linearization stage, to which a suitably tailored adaptive observer is added. The good performance of the controller is validated through experiments on a small-scale network., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Novel thermal management strategy for improved inverter reliability in electric vehicles

  • Trancho, Elena
  • Ibarra Basabe, Edorta
  • Prieto, Pablo
  • Arias Pujol, Antoni
  • Lis, Adrian
  • Pai, Ajay Poonjal
Requirements for electric vehicle (EV) propulsion systems—i.e., power density, switching frequency and cost—are becoming more stringent, while high reliability also needs to be ensured to maximize a vehicle’s life-cycle. Thus, the incorporation of a thermal management strategy is convenient, as most power inverter failure mechanisms are related to excessive semiconductor junction temperatures. This paper proposes a novel thermal management strategy which smartly varies the switching frequency to keep the semiconductors’ junction temperatures low enough and consequently extend the EV life-cycle. Thanks to the proposal, the drivetrain can operate safely at maximum attainable performance limits. The proposal is validated through simulation in an advanced digital platform, considering a 75-kW in-wheel Interior Permanent Magnet Synchronous Machine (IPMSM) drive fed by an automotive Silicon Carbide (SiC) power converter., This work has been supported in part by the European Commission through ECSEL Joint Undertaking (JU) under Grant Agreement No. 783174 (HiPERFORM project), by the Government of the Basque Country within the research program ELKARTEK as the projects ELPIVE (KK-2019/0006) and ENSOL 2 (KK-2020/00077), by the Government of the Basque Country within the fund for research groups of the Basque University system IT978-16, by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P, and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust admittance shaping approach to grid current harmonic attenuation and resonance damping

  • Cóbreces Álvarez, Santiago
  • Wang, Xiongfei
  • Pérez Serrano, Jorge
  • Griñó Cubero, Robert
  • Blaabjerg, Frede
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a novel grid current control of a grid-connected voltage source converter with an LCL filter. The proposed control method uses an H 8 synthesis method to shape the input admittance of the converter, to track a given current reference, and/or to limit the controller actuation at different frequency ranges. The converter admittance is shaped, both in magnitude and phase, following a model reference defined by the designer in the frequency domain. By specifying a low admittance magnitude reference, the optimization algorithm will obtain a controller that actively damp the filter resonance and attenuate/reject the grid voltage oscillations, either in a wide frequency range or concentrated at the main harmonic frequencies. Additionally, the proposed controller design methodology takes advantage of its admittance phase shaping capability to improve the system robustness in front of grid uncertainties and minimizing converter impact over grid stability due to its positive-real nature. The synthesized controller only measures the grid current and voltage to achieve the aforementioned results, reducing the number of sensors (and their associated cost) required for its implementation. Experimental results illustrate the correct behavior of the closedloop system with the designed controller in time and frequency domain., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Three-phase phase-locked loop algorithms based on sliding modes

  • Dòria Cerezo, Arnau
  • Repecho del Corral, Víctor
  • Biel Solé, Domingo
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article proposes a family of phase-locked loop schemes based on sliding modes. The use of sliding mode algorithms ensures fast response and global stability. In particular, two new algorithms are presented, both based on a complex framework for representing three-phase signals. This article compares the obtained algorithms with the traditional schemes, and a faster response is obtained when sliding modes are used. Additionally, as an application example, the algorithm is combined with a complex-coefficient filter that allows an easy identification of both positive and negative sequence harmonics. The proposed algorithms are illustrated by numerical simulations and experimentally validated using a digital signal processor., Peer Reviewed, Postprint (published version)