Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Digital Twin-Based Optimization for Ultraprecision Motion Systems With Backlash and Friction

  • Haber Guerra, Rodolfo E.
  • Quiza, Ramón
  • Villalonga, Alberto
  • Arenas, Javier
  • Castaño, Fernando
A digital twin-based optimization procedure is presented for an ultraprecision motion system with a flexible shaft connecting the motor to the (elastic) load, which is subject to both backlash and friction. The main contributions of the study are the design of the digital twin and its implementation, assuming a two-mass drive system. The procedure includes the virtual representation of mechanical and electrical components, non-linearities (backlash and friction), and the corresponding control system. A procedure for digital twin-based optimization is also presented, in which the maximum absolute position error is minimized while maintaining accuracy with no significant increase in the control effort. The optimal settings for the controller parameters and for the backlash peak amplitude, the backlash peak time, and the hysteresis amplitude are then determined, in order to guarantee an appropriate dynamic response in the presence of backlash and friction. The surface quality of certain manufactured components, such as hip and knee implants, depends on the smoothness and the accuracy of the real trajectory produced in the cutting process that is strongly influenced by the maximum position error. The simulations and experimental studies are presented using a real platform and two references for trajectory control, and a comparison of four digital twin-based optimization methods. The simulation study and the real-time experiments demonstrate the suitability of the digital twin-based optimization procedure and lay the foundations for the implementation of the proposed method at an industrial level., This work has been completed within the framework of projects DPI2017-86915-C3-1-R “Cognitive inspiration navigation for autonomous driving” and the European Project Grant 826417 “Power2Power: The next-generation silicon-based power solutions in mobility, industry and grid for sustainable decarbonisation in the next decade”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Generated OSM-Based Driving Corridors

  • Godoy, Jorge
  • Artuñedo, Antonio
  • Villagrá, Jorge
Finding the boundaries of the drivable space is a key to the development of any advanced driver assistance systems with automated driving functions. A common approach found in the literature is to combine the information of digital maps with multiple on-board sensors for building a robust and accurate model of the environment from which to extract the navigable space. In this sense, the digital map is the crucial component for relating the location of the vehicle and identifying the different road features. This paper presents an automatic procedure for generating driving corridors from OpenStreetMap. The proposed method expands the original map representation, replacing polylines by polynomial-based roads, whose sections are defined using cubic Bézier curves. All curves are automatically adjusted from the original road description, thus generating an efficient and accurate road representation without human intervention. Finally, the driving corridors are generated as a concatenation of the modified road sections along a planned route. The proposed approach has been validated in a peri-urban environment, for which corridors where successfully generated in all cases., This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness with National Project TCAP-AUTO under Grant RTC-2015-3942-4, in part by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE under Grant DPI2017-86915-C3-1-R, and in part by the European Commission through the Project PRYSTINE under Grant ECSEL-783190-2. The work of J. Godoy was supported by the Juan de la Cierva Fellowship Program through the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Time Motion Planning Approach for Automated Driving in Urban Environments

  • Artuñedo, Antonio
  • Villagrá, Jorge
  • Godoy, Jorge
Autonomous vehicles must be able to react in a timely manner to typical and unpredictable situations in urban scenarios. In this connection, motion planning algorithms play a key role as they are responsible of ensuring driving safety and comfort while producing human-like trajectories in a wide range of driving scenarios. Typical approaches for motion planning focus on trajectory optimization by applying computation-intensive algorithms, rather than finding a balance between optimatily and computing time. However, for on-road automated driving at medium and high speeds, determinism is necessary at high sampling rates. This work presents a trajectory planning algorithm that is able to provide safe, human-like and comfortable trajectories by using cost-effective primitives evaluation based on quintic Bézier curves. The proposed method is able to consider the kinodynamic constrains of the vehicle while reactively handling dynamic real environments in real-time. The proposed motion planning strategy has been implemented in a real experimental platform and validated in different real operating environments, successfully overcoming typical urban traffic scenes where both static and dynamic objects are involved., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE under Grant DPI2017-86915-C3-1-R, in part by the European Commission through the Projects PRYSTINE under Grant ECSEL-783190-2, in part by SECREDAS under Grant ECSEL-783119-2, and in part by the Community of Madrid through SEGVAUTO 4.0-CM Programme under Grant S2018-EMT-4362., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor Reliability in Cyber-Physical Systems Using Internet-of-Things Data: A Review and Case Study

  • Castaño, Fernando
  • Strzelczak, Stanisław
  • Villalonga, Alberto
  • Haber Guerra, Rodolfo E.
  • Kossakowska, Joanna
Nowadays, reliability of sensors is one of the most important challenges for widespread application of Internet-of-things data in key emerging fields such as the automotive and manufacturing sectors. This paper presents a brief review of the main research and innovation actions at the European level, as well as some on-going research related to sensor reliability in cyber-physical systems (CPS). The research reported in this paper is also focused on the design of a procedure for evaluating the reliability of Internet-of-Things sensors in a cyber-physical system. The results of a case study of sensor reliability assessment in an autonomous driving scenario for the automotive sector are also shown. A co-simulation framework is designed in order to enable real-time interaction between virtual and real sensors. The case study consists of an IoT LiDAR-based collaborative map in order to assess the CPS-based co-simulation framework. Specifically, the sensor chosen is the Ibeo Lux 4-layer LiDAR sensor with IoT added capabilities. The modeling library for predicting error with machine learning methods is implemented at a local level, and a self-learning-procedure for decision-making based on Q-learning runs at a global level. The study supporting the experimental evaluation of the co-simulation framework is presented using simulated and real data. The results demonstrate the effectiveness of the proposed method for increasing sensor reliability in cyber-physical systems using Internet-of-Things data., This work was partially supported by the project Power2Power: Providing next-generation silicon-based power solutions in transport and machinery for significant decarbonisation in the next decade, funded by the Electronic Component Systems for European Leadership (ECSEL-JU) Joint Undertaking and the Ministry of Science, Innovation and Universities (MICINN), under grant agreement No 826417. In addition, this work was also funded by the Spanish Ministry of Science, Innovation and Universities through the project COGDRIVE (DPI2017-86915-C3-1-R). Preparation of this publication was also partially co-financed by the Polish National Agency for Academic Exchange (NAWA) through the project: “Industry 4.0 in Production and Aeronautical Engineering (IPAE)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Validación de una estrategia para la estimación del riesgo en intersecciones con vehículos conectados

  • Villagrá, Jorge
  • Perarnau, Manuel
  • Godoy, Jorge
  • Artuñedo, Antonio
Para hacer posible el despliegue masivo de vehículos automatizados en entornos urbanos es capital avanzar en la toma de decisiones seguras. En particular, es necesario mejorar la capacidad de inferir las intenciones de los diferentes agentes y el riesgo que implican en las escenas complejas de conducción, mejorando así la seguridad y predictibilidad de los sistemas de ayuda a la conducción y de conducción automatizada. El presente trabajo muestra la implementación y validación en simulación de una solución novedosa para estimar el riesgo de conducción utilizando un modelo de espacio y estados en el contexto de las intersecciones. La estrategia utilizada modela la escena de conducción como una red dinámica Bayesiana e infiere intenciones y expectativas de los agentes involucrados a través de un filtro de partículas. Los resultados son muy prometedores tanto en tasa de acierto como en horizonte de predicción en los entornos para los que ha sido probado: intersecciones en Y, en T y en X., To make possible the massive deployment of automated vehicles in urban environments, it is essential to move forward in making safe decisions. In particular, it is necessary to improve the ability to infer the intentions of the different agents and the risk involved in complex driving scenes, thus improving the safety and predictability of automated driving and driving assistance systems. The present work shows the implementation and validation in simulation of a novel solution to estimate the risk of driving using a model of space and states in the context of intersections. The strategy used models the driving scene as a dynamic Bayesian network and infers intentions and expectations of the agents involved through a particle filter. The results are very promising in both the success rate and the prediction horizon in the environments for which it has been tested: Y, T and X intersections., Los autores quieren agradecer la ayuda financiera recibida del proyecto COGDRIVE (DPI2017- 86915-C3-1-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A decision-making architecture for automated driving without detailed prior maps

  • Artuñedo, Antonio
  • Godoy, Jorge
  • Villagrá, Jorge
Autonomous driving requires general methods to generalize unpredictable situations and reason in complex scenarios where safety is critical and the vehicle must react in a reliable manner. In this sense, digital maps are a crucial component for relating the location of the vehicle and identifying the different road features. In this work, we present a decision-making architecture which does not require detailed prior maps. Instead, OSM is used to plan a global route and an automatically generate driving corridors, which are adapted using a proposed vision-based algorithm. Moreover, a grid-based approach is also applied to consider the localization uncertainty. Those self-generated driving corridors are used by the local planner to plan the trajectories the vehicle will follow. Our approach integrates global, local and HMI components to provide the required functionalities for autonomous driving in a general manner., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), and by the European Commission through the Project PRYSTINE (ECSEL-783190-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Machine learning based motion planning approach for intelligent vehicles

  • Artuñedo, Antonio
  • Corrales, Gabriel
  • Villagrá, Jorge
  • Godoy, Jorge
The complexity to handle complex situations in automated driving requires increasing computational resources. In this work, we propose a machine learning approach for motion planning aiming at optimizing the set of path candidates to be evaluated in accordance with the driving context. Thus, the computation cost of the whole motion planning strategy can be reduced while generating safe and comfortable trajectories when required. The proposed strategy has been implemented in a real experimental platform and validated in different operating environments, successfully providing high quality trajectories in a small time frame., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Programme, and by the European Commission through the Project PRYSTINE (ECSEL-783190-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Framework for motion prediction of vehicles in a simulation environment

  • Medina-Lee, Juan Felipe
  • Trentin, Vinicius
  • Villagrá, Jorge
Efficient testing and validation of software components for highly automate vehicles is one of the key challenges to be solved for their massive deployment. The number of driving situation and environment variables makes validation almost intractable with real vehicles in open roads, and the testing reproducibility can only be achieved via simulation. This manuscript presents a framework and preliminary results for motion prediction of vehicles in a simulation environment that is being currently developed by the AUTOPIA Program., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018- EMT-4362) Programme, and by the EuropeanCommission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reachability Estimation in Dynamic Driving Scenes for Autonomous Vehicles

  • Medina-Lee, Juan Felipe
  • Artuñedo, Antonio
  • Godoy, Jorge
  • Villagrá, Jorge
Autonomous vehicles will find an infinite number of possible scenarios while driving in urban environments and need to react in a proper manner. For that reason, it is important to have algorithms that can propose driving alternatives for different type of scenarios in a global and unified way instead of using rule-based algorithms which depend on the driving scene. This paper presents a reachability estimation algorithm designed to obtain a safe and comfort-optimized trajectory set for different driving scenarios. First, a finite number of path candidates are created using Bezier curves. Then, all valid path ´ candidates are combined with the reachable sets of dynamic obstacles to generate speed profiles consistent with safety and comfort requirements. The output of this algorithm would allow a decision-making strategy to select the optimum candidate depending on different criteria., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Programme, and by the European Commission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Interaction-aware risk assessment: focus on the lateral intention

  • Villagrá, Jorge
  • Artuñedo, Antonio
  • Trentin, Vinicius
  • Godoy, Jorge
To make the massive deployment of automated vehicles possible in complex urban environments, it is essential to provide them with the ability of making safe and useful decisions.To tha tend,it is necessary to improve their capability to infer the intentions of the surrounding vehicles and their associated collision risk for the ego-vehicle in complex driving scenes. This work shows the implementation and validation in simulation of a probabilistic approach to estimate the risk of driving under uncertain conditions, combining (i) intention estimations and (ii) the expected behaviour of vehicles according to the topology and the subsequent traffic rules of the considered driving scenario. Promising results in terms of success rate and prediction horizon have been obtained testing the proposed approach in driving situations where lateral intention estimation is relevant, namely in multi-lane roundabouts and highways., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018EMT-4362) Programme, and by the European Commission through the Projects NEWCONTROL (ECSEL-826653-2) and SECREDAS (ECSEL-783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Grid-Based Framework for Collective Perception in Autonomous Vehicles

  • Godoy, Jorge
  • Jiménez Bermejo, Víctor
  • Artuñedo, Antonio
  • Villagrá, Jorge
© 2021 by the authors., Today, perception solutions for Automated Vehicles rely on sensors on board the vehicle, which are limited by the line of sight and occlusions caused by any other elements on the road. As an alternative, Vehicle-to-Everything (V2X) communications allow vehicles to cooperate and enhance their perception capabilities. Besides announcing its own presence and intentions, services such as Collective Perception (CPS) aim to share information about perceived objects as a high-level description. This work proposes a perception framework for fusing information from on-board sensors and data received via CPS messages (CPM). To that end, the environment is modeled using an occupancy grid where occupied, and free and uncertain space is considered. For each sensor, including V2X, independent grids are calculated from sensor measurements and uncertainties and then fused in terms of both occupancy and confidence. Moreover, the implementation of a Particle Filter allows the evolution of cell occupancy from one step to the next, allowing for object tracking. The proposed framework was validated on a set of experiments using real vehicles and infrastructure sensors for sensing static and dynamic objects. Results showed a good performance even under important uncertainties and delays, hence validating the viability of the proposed framework for Collective Perception., This work has been partially funded by the Spanish Ministry of Science and Innovation with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Program, and by the European Commission and ECSEL Joint Undertaking through the Projects PRYSTINE (783190) and SECREDAS (783119)., Peer reviewed