Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Solvent Chain Length Directed Supramolecular Polymorphism

  • Fernández, Zulema
  • Parashar, Megha
  • Manha Veedu, Rasitha
  • Baumert, Sebastian
  • Rubert, Llorenç
  • Soberats, Bartolomé
  • Balasubramanian, Sundaram
  • Fernández, Gustavo
[eng] Although solvents are central to self-assembly, their chain length has not been recognized as a factor controlling supramolecular polymerization. Herein, we introduce solvent chain length as a key parameter dictating the outcome of supramolecular polymerization. We investigated this phenomenon using a boron dipyrromethene (BODIPY) derivative bearing a phenyl group at the meso-position, amide groups, and solubilizing dodecyloxy side chains (1). Remarkably, while the shortest liquid alkanes, n-pentane and n-hexane, promote face-to-face (H-type) stacking interactions leading to one-dimensional fiber-like morphologies (AggB), the longest liquid linear alkane, n-hexadecane, induces a molecular rearrangement into slipped stacks that cannot efficiently grow into extended one-dimensional assemblies, resulting in discrete morphologies (AggA). In alkanes of intermediate length (C7–C15) rying degrees, leading to 'concomitant supramolecular polymorphs', with the slipped packing becoming progressively favored as the chain length increases. Molecular dynamics (MD) simulations reveal that AggA is favored in longer-chain solvents owing to enhanced solvent interactions and conformational freedom of the side chains, while the proximity of aliphatic groups to the aromatic cores attenuates stack elongation. Our findings broaden the role of solvents as design elements in self-assembly and offer new insights into the development of functional supramolecular polymorphs.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Hydrogen-bonded π-conjugated supramolecular polymers

  • Ximenis, Pedro
  • Martínez, Daniel
  • Rubert, Llorenç
  • Soberats, Bartolomé
[eng] The self-assembly of π-conjugated molecules offers a promising route for designing advanced functional materials with tailored optical and electronic properties. Owing to their nature, organic π-conjugated scaffolds spontaneously assemble by π–π stacking, while the introduction of hydrogen-bonding (H-bonding) interactions in these systems has emerged as a key strategy to gain control over self-assembly processes and the resulting supramolecular assemblies. H-bonding provides both specificity and directionality in non-covalent interactions, facilitating the formation of well-ordered and stable structures, such as supramolecular polymers. This review examines recent advances in design strategies that leverage H-bonding chromophores to fine-tune self-assembly behavior in solution, discussing the impact of monomer design and the experimental conditions on molecular packing and the morphologies of the resulting assemblies. Along with the thermodynamic advantages of H-bonding, its impact on self-assembly kinetics is also discussed, highlighting phenomena such as pathway complexity and related concepts like living supramolecular polymerization, secondary nucleation and supramolecular polymorphism. By providing a comprehensive overview of the current state of the field, this work aims to guide future research efforts toward the rational design of hierarchically ordered π-conjugated supramolecular materials.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Role of p-Benzoquinone in the Photocatalytic Production of Solketal

  • Ariza-Pérez, Alejandro
  • Martín-Gómez, Juan
  • Herrera-Beurnio, M. Carmen
  • López Tenllado, Francisco Javier
  • Hidalgo-Carrillo, J.
  • Marinas, Alberto
  • Urbano, Francisco José
The role of p-benzoquinone (BQ) as a photocatalyst in the synthesis of solketal under UV irradiation has been studied, along with the combined use of BQ/TiO2 P25 as a photocatalytic system for the process. The presence of the O2/O2−• redox couple is essential for the reaction to take place. However, experiments with p-benzoquinone as a superoxide radical scavenger failed, with the opposite effect of enhancing the reaction being observed. It was found that p-benzoquinone and oxygen compete for photogenerated electrons in the conduction band of titania. A redox equilibrium between p-benzoquinone and hydroquinone (H2Q), mediated by the O2/O2−• system, was identified as a key factor in enabling the reaction. Furthermore, EPR spin-trapping experiments confirmed the presence of the carbon-centered radical 2-hydroxypropan-2-yl, which was determined to be the main radical species involved in the process. Either acetone or 2-propanol can generate this radical, with the BQ/H2Q redox system being pivotal in the formation of the hemiacetal intermediate. This intermediate is subsequently converted into the final acetal (solketal), with H2Q acting as a photoacid through an excited-state proton transfer (ESPT) mechanism. The photoacid behavior of hydroquinone was confirmed using pyridine as a basic probe, as the formation of hydroquinone–pyridine adducts was detected by Raman spectroscopy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Effect of CaO in Alkali-Activated Fly Ash Mortar Under Different Curing Temperatures

  • Murillo-Silo, David
  • Fernández Ledesma, Enrique
  • Jiménez, José Ramón
  • Fernández Rodríguez, José María
  • Suescum-Morales, David
This work investigates the influence of CaO as a partial substitute for fly ash in alkali-activated fly ash mortars (AAFM), aiming to reduce reliance on conventional thermal curing. Mortars containing 0%, 2%, and 4% CaO were prepared and subjected to two curing regimes: thermal curing at 70 °C for 24 h and ambient curing at 21 °C for 24 h. The materials were thoroughly characterised by XRD, XRF, TGA/DTA, SEM, and particle size distribution, while compressive and flexural strength, density, and porosity were evaluated at 7, 14, and 28 days. The results demonstrated that CaO addition improved mechanical performance in both curing environments, particularly at a 4% substitution level, where compressive strength increased by up to 13.8% under thermal curing conditions. These improvements were associated with the formation of C-S-H and C-A-S-H gels, especially margarite, which contributed to accelerated setting and earlier demoulding. Nonetheless, while CaO incorporation improved mechanical performance and allowed earlier demoulding, it could not fully replicate the effects of heat curing at the studied percentages. Ambient-cured mortars exhibited higher porosity and less compact microstructures than thermally cured samples, which displayed denser, layered morphologies. The study confirms that CaO can act as a partial substitute or reducer for conventional curing, but is not sufficient to enable in situ applications without heat treatment. Future research should explore higher CaO contents in combination with set retarders, intermediate curing regimes, or alternative strategies to balance mechanical performance with energy efficiency.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Large-scale serosurvey of Chlamydia abortus in zoo ungulates in Spain

  • Beato-Benítez, Adrián
  • García-Bocanegra, Ignacio
  • Gonzálvez, Moisés
  • Villar-Ibáñez, Jessica
  • Jiménez-Martín, Débora
  • Martínez-Valverde, Rosa
  • Borragán, Santiago
  • Riva-Fraga, Manuel de la
  • Cano Terriza, David
Chlamydia abortus is a zoonotic bacterium worldwide distributed, which mainly leads to reproductive disorders in different domestic and wild species. Although C. abortus infection has been widely reported in free-ranging ungulates, information regarding this pathogen in captive wild ungulates remains limited. The aims of the present study were to assess C. abortus exposure in zoo ungulates in Spain and to determine the dynamics of seropositivity in animals sampled longitudinally throughout the study period. Between 2007 and 2023, serum samples from 483 ungulates representing 65 species were collected across 11 zoos from Spain. Additionally, 42 of the 483 animals were longitudinally sampled. Anti-C. abortus antibodies were detected in ten individuals (2.1 %; 95 %CI: 0.8–3.3) using a commercial indirect multi-species ELISA. Seropositivity was found in 9.2 % (6/65) of the species analyzed and in 45.5 % (5/11) of the zoos sampled. Seroprevalence was significantly higher during the period 2019–2020 compared to 2007–2014, 2015–2018 and 2021–2023 (P = 0.013). Three of the 42 longitudinally surveyed animals presented seropositivity throughout the study period. This is the first large-scale serosurvey of C. abortus conducted in zoo ungulates, also describing for the first time exposure to C. abortus in four species, which could expand the host range of this zoonotic bacterium. Our results suggest a limited but widespread circulation of C. abortus in wild ungulates housed in zoos in Spain. Zoo ungulates should be included in surveillance programs for C. abortus to enhance our understanding of the epidemiology of this zoonotic pathogen in anthropized environments under a One Health framework.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Compatibility of CO2 adsorbents with cement-, lime- and cement-lime based materials. Innovations in carbon capture and utilization technologies

  • Cantador Fernández, David
  • Álvarez, José Ignacio
  • Navarro-Blasco, Íñigo
  • Jiménez, José Ramón
  • Fernández Rodríguez, José María
The compatibility of three CO2-capturing mesoporous nanomaterials with cement-, lime- and cement-lime based materials was studied: a calcined Mg Al hydrotalcite and two mesoporous organosilica with ethylene (ethane-PMO) and phenylene (benzene-PMO) bridges. Isothermal calorimetry, thermogravimetric analysis and zeta-potential tests showed that the best compatibility results were achieved for hydrotalcite at 20 % of addition, which accelerated cement hydration by up to 100 % and increased its intensity. All hydrotalcite ratios studied improved the hydration results of the cement. Ethane-PMO produced a delay in cement hydration and it was found that for low percentages of addition (up to 1 %) the results were similar to those of the cement. Both the hydrotalcite at a high addition level and the ethane-PMO at a low addition level are compatible materials that support proper hydration and the formation of C-S-H phases in cement. Once proven to be compatible with cementitious and lime matrices, the incorporation of these CO2-capturing nanomaterials into cement- and lime-based materials could reduce their carbon footprint, making them more environmentally friendly.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent Advances in Ni-Catalyzed 1,1-Difunctionalization of Unactivated Olefins

  • Velasco-Rubio, Álvaro
  • Martin, Ruben
Unactivated olefins rank amongst the most important feedstocks in organic synthesis. Their availability makes them particularly useful synthons for subsequent functionalization, particularly in a catalytic manner. Driven by the popularity ascribed by nickel catalysis as a new tool to rapidly forge molecular architectures via one-or two-electron manifolds, the recent years have witnessed significant advances in Ni-catalyzed olefin difunctionalization. While 1,2-difunctionalization or remote functionalization via “chain-walk” have become mature disciplines for repurposing the potential of olefins as building blocks, it was only recently that extensions of this chemistry to 1,1-difunctionalization have been possible. This review summarizes the recent advances in Ni-catalyzed olefin 1,1-difunctionalization, holding considerable promise as a new powerful strategy for our ever-growing synthetic repertoire.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Osteogenic potential of a biomaterial enriched with osteostatin and mesenchymal stem cells in osteoporotic rabbits

  • Luengo Alonso, Gonzalo
  • Bravo Giménez, Beatriz
  • Lozano Borregón, Daniel
  • Heras, Clara
  • Sánchez Salcedo, Sandra
  • Benito Garzón, Lorena
  • Abella García, Mónica
  • Vallet Regí, María Dulce Nombre
  • Cecilia López, David
  • Salinas Sánchez, Antonio Jesús
Mesoporous bioactive glasses (MBGs) of the SiO2–CaO–P2O5 system are biocompatible materials with a quick and effective in vitro and in vivo bioactive response. MBGs can be enhanced by including therapeutically active ions in their composition, by hosting osteogenic molecules within their mesopores, or by decorating their surfaces with mesenchymal stem cells (MSCs). In previous studies, our group showed that MBGs, ZnO-enriched and loaded with the osteogenic peptide osteostatin (OST), and MSCs exhibited osteogenic features under in vitro conditions. The aim of the present study was to evaluate bone repair capability after large bone defect treatment in distal femur osteoporotic rabbits using MBGs (76%SiO2–15%CaO–5%P2O5–4%ZnO (mol-%)) before and after loading with OST and MSCs from a donor rabbit. MSCs presence and/or OST in scaffolds significantly improved bone repair capacity at 6 and 12 weeks, as confirmed by variations observed in trabecular and cortical bone parameters obtained by micro-CT as well as histological analysis results. A greater effect was observed when OST and MSCs were combined. These findings may indicate the great potential for treating critical bone defects by combining MBGs with MSCs and osteogenic peptides such as OST, with good prospects for translation to clinical practice.