Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of the first full size ATLAS ITk strip sensor for the endcap region

  • Lacasta Llácer, Carlos
  • Abo, Y.
  • Affolder, A.A.
  • Fadeyev, V.
  • Hara, K.
  • Hessey, N.P.
  • Kamada, S.
  • Orr, R.S.
  • Teuscher, R.
  • Ullán Comes, Miguel
  • Unno, Y.
  • Yamamura, K.
The ATLAS collaboration is designing the all-silicon Inner Tracker (ITk) that will operate in the HL-LHC replacing the current design. The silicon microstrip sensors for the barrel and the endcap regions in the ITk are fabricated in 6 inch, p-type, float-zone wafers, where large-area strip sensor designs are laid out together with a number of miniature sensors. The radiation tolerance and specific system issues like the need for slim edge of 450 μm have been tested with square shaped sensors intended for the barrel part of the tracker. This work presents the design of the first full size silicon microstrip sensor for the endcap region with a slim edge of 450 μm. The strip endcaps will consist of several wheels with two layers of silicon strip sensors each. The strips have to lie along the azimuthal direction, apart from a small stereo angle rotation (20 mrad on each side, giving 40 mrad total) for measuring the second coordinate of tracks. This stereo angle is built into the strip layout of the sensor and, in order to avoid orphan strips, the sensor edges are inclined by the stereo angle. On top of this, the top and bottom edges are designed as arcs to have equal length strips. Together with the design of this new Stereo Annulus sensor, we will report on the initial measurements of the leakage current as a function of bias voltage, after dicing, and the depletion voltage., The research was supported and financed in part by Canada Foundation for Innovation, the National Science and Engineering Research Council (NSERC) of Canada under the Research and Technology Instrumentation (RTI) grant SAPEQ-2016-00015; the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program, ref. FPA2015-65652-C4-4-R (MINECO/FEDER, UE), and co-financed with FEDER funds; and USA Department of Energy, Grant DE-SC0010107., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mapping the depleted area of silicon diodes using a micro-focused X-ray beam

  • Poley, L.
  • Blue, A.
  • Bloch, I.
  • Buttar, C.
  • Fadeyev, V.
  • Fernández-Tejero, Javier
  • Fleta, Celeste
  • Hacker, J.
  • Lacasta Llácer, Carlos
  • Miñano, Mercedes
  • Renzmann, M.
  • Rossi, E.
  • Sawyer, C.
  • Sperlich, D.
  • Stegler, M.
  • Ullán Comes, Miguel
  • Unno, Y.
For the Phase-II Upgrade of the ATLAS detector at CERN, the current ATLAS Inner Detector will be replaced with the ATLAS Inner Tracker (ITk). The ITk will be an all-silicon detector, consisting of a pixel tracker and a strip tracker. Sensors for the ITk strip tracker are required to have a low leakage current up to bias voltages of -500 V to maintain a low noise and power dissipation. In order to minimise sensor leakage currents, particularly in the high-radiation environment inside the ATLAS detector, sensors are foreseen to be operated at low temperatures and to be manufactured from wafers with a high bulk resistivity of several kΩ·cm. Simulations showed the electric field inside sensors with high bulk resistivity to extend towards the sensor edge, which could lead to increased surface currents for narrow dicing edges. In order to map the electric field inside biased silicon sensors with high bulk resistivity, three diodes from ATLAS silicon strip sensor prototype wafers were studied with a monochromatic, micro-focused X-ray beam at the Diamond Light Source (Didcot, U.K.). For all devices under investigation, the electric field inside the diode was mapped and its dependence on the applied bias voltage was studied., Individual authors1 were supported in part by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The work at SCIPP4 was supported by the Department of Energy, grant DE-SC0010107. This work5 issupported and financed in part by the Spanish Ministry of Science, Innovation and Universities through the Particle Physics National Program, ref. FPA2015-65652-C4-4-R (MICINN/FEDER, UE), and co-financed with FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Test beam evaluation of silicon strip modules for ATLAS phase-II strip tracker upgrade

  • Blue, A. J.
  • Affolder, A. A.
  • Ai, X.
  • Allport, P. P.
  • Arling, J. H.
  • Atkin, R. J.
  • Bruni, L. S.
  • Carli, I.
  • Casse, G.
  • Chen, L.
  • Chisholm, A.
  • Cormier, K.
  • Cunningham, W.
  • Dervan, P.
  • Díez, Sergio
  • Dolezal, Z.
  • Dopke, J.
  • Dreyer, E.
  • Dreyling-Eschweiler, J.
  • Escobar, Carlos
  • Fabiani, V.
  • Fadeyev, V.
  • Fernández-Tejero, Javier
  • Fleta, Celeste
  • Gabrielli, Alessandro
  • Gallop, B.
  • Argos, C. G.
  • Greenall, A.
  • Gregor, I. M.
  • Greig, G.
  • Guescini, F.
  • Hara, K.
  • Hauser, M.
  • Huang, Y.
  • Hunter, R. F. H.
  • Keller, J. S.
  • Klein, C. T.
  • Kodys, P.
  • Koetz, U.
  • Koffas, T.
  • Kotek, Z.
  • Kroll, J.
  • Kühn, S.
  • Lee, S. J.
  • Liu, Y.
  • Lohwasser, K.
  • Mészárosová, L.
  • Mikestikova, M.
  • Miñano Moya, M.
  • Rodriguez Rodriguez, D.
The planned High Luminosity Large Hadron Collider is being designed to maximise the physics potential of the LHC with 10 years of operation at instantaneous luminosities of 7.5×10 34 cm ¿2 s ¿1 . A consequence of this increased luminosity is the expected radiation damage requiring the tracking detectors to withstand hadron fluence to over 1×10 15 1 MeV neutron equivalent per cm 2 in the ATLAS Strips system. Fast readout electronics, deploying 130 nm CMOS front-end electronics are glued on top of a silicon sensor to make a module. The radiation hard n-in-p micro-strip sensors used have been developed by the ATLAS ITk Strip Sensor collaboration and produced by Hamamatsu Photonics. A series of tests were performed at the DESY-II test beam facility to investigate the detailed performance of a strip module with both 2.5 cm and 5 cm length strips before irradiation. The DURANTA telescope was used to obtain a pointing resolution of 2 ¿m, with an additional pixel layer installed to improve timing resolution to ~25 ns. Results show that prior to irradiation a wide range of thresholds (0.5¿2.0 fC) meet the requirements of a noise occupancy less than 1×10 ¿3 and a hit efficiency greater than 99%. © 2018, The research was supported and financed in part by Canada Foundation for Innovation, the National Science and Engineering Research Council (NSERC) of Canada under the Research and Technology Instrumentation (RTI) grant SAPEQ-2016-00015; the National Key Program for S&T Research and Development (Grant No. 2016YFA0400101) of China and CAS-Helmholtz Joint Research Group; theMinistry of Education, Youth and Sports of the Czech Repub87lic coming from the projectLM2015058 - Research infrastructure for experiments at CERN; the DST/NRF in South 88 Africa; the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program, ref. 89 FPA2015-65652-C4-4-R (MINECO/FEDER, UE), and co-financed with FEDER funds; the UK’s Science and Tech90nology Facilities Council; USA Department of Energy, Grant DE-SC0010107; and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement no. 654168. The measurements leading to these results have been performed at the Test Beam Facility at DESY Hamburg (Germany), a member of the Helmholtz Association (HGF)., Peer reviewed