Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Amorphous vs. nanocrystalline calcium phosphate as efficient nanocarriers of elicitors in vineyards

  • Parra Torrejón, Belén|||0000-0002-8085-8634
  • Salvachúa de la Fuente, Marta
  • Ramírez Rodríguez, Gloria Belén|||0000-0003-3628-6605
  • Delgado López, José Manuel|||0000-0001-9643-9322
Nanotechnology is emerging as a potential strategy to achieve sustainable agricultural productivity and global food security. Engineered nanoparticles (NPs) are endowed with the ability to deliver active ingredients in a responsive manner, reducing the adverse environmental impacts in comparison to the conventional practices. However, the relationship between NP features (i.e., size, morphology, surface charge, structure, etc.) and functionality has been scarcely studied so far. In this work, two types of calcium phosphate NPs were functionalized with the plant resistance-inductor methyl jasmonate (MeJ), which stimulates the production of secondary plant metabolites (e.g., anthocyanins, stilbenes, and flavonols) in grapes. The properties of the resulting nanomaterials, namely, elongated apatite (Ap-MeJ) and roundshaped amorphous calcium phosphate NPs (ACP-MeJ), were studied in detail. In addition, the loading capacity, release kinetics and elicitor thermal stability of the two nanosystems were compared. The results indicated that the differences in terms of morphology, crystalline structure and surface charge did not affect the release kinetics nor the protective action offered by the NPs. However, ACP-MeJ showed much higher MeJ loading capacity than Ap-MeJ. Both types of nanomaterials exhibited similar performance in field experiments on Monastrell vineyards (Vitis vinifera L.). Foliar application of ACP-MeJ and Ap-MeJ (1 mM MeJ) produced wines with similar contents of anthocyanins and tannins (around 500 mg L−1 and 1100 mg L−1, respectively), but Ap-MeJ treatment required doubling the NP amount due to its lower MeJ adsorption capacity. Both treatments produced wines with higher tannin concentration than wines from non-treated grapes or wine treated with free MeJ at a much higher dosage (10 mM). Results highlight the potential of ACP and Ap NPs as elicitor nanocarriers enabling enhancement of the quality of wine in a more sustainable manner., Project nanoSOP, PDC2022-133191-I00 funded by MCIN/AEI/10.13039/ 501100011033, The “European Union NextGenerationEU/PRTR” and projects NanoVIT, RTI- 2018-095794-A-C22, RTI-2018-095794-B-C21 funded by MCIN/AEI/10.13039/501100011033, ERDF A way of making Europe”. JMDL, RYC-2016-21042 and RYC2021-032734, MCIN/AEI/10.13039/501100011033, “ESF Investing in your future”. GBRR also acknowledges Junta de Andalucia for her postdoctoral contract within the PAIDI 2020 program (DOC_01383).
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Solvent Chain Length Directed Supramolecular Polymorphism

  • Fernández, Zulema
  • Parashar, Megha
  • Manha Veedu, Rasitha
  • Baumert, Sebastian
  • Rubert, Llorenç
  • Soberats, Bartolomé
  • Balasubramanian, Sundaram
  • Fernández, Gustavo
[eng] Although solvents are central to self-assembly, their chain length has not been recognized as a factor controlling supramolecular polymerization. Herein, we introduce solvent chain length as a key parameter dictating the outcome of supramolecular polymerization. We investigated this phenomenon using a boron dipyrromethene (BODIPY) derivative bearing a phenyl group at the meso-position, amide groups, and solubilizing dodecyloxy side chains (1). Remarkably, while the shortest liquid alkanes, n-pentane and n-hexane, promote face-to-face (H-type) stacking interactions leading to one-dimensional fiber-like morphologies (AggB), the longest liquid linear alkane, n-hexadecane, induces a molecular rearrangement into slipped stacks that cannot efficiently grow into extended one-dimensional assemblies, resulting in discrete morphologies (AggA). In alkanes of intermediate length (C7–C15) rying degrees, leading to 'concomitant supramolecular polymorphs', with the slipped packing becoming progressively favored as the chain length increases. Molecular dynamics (MD) simulations reveal that AggA is favored in longer-chain solvents owing to enhanced solvent interactions and conformational freedom of the side chains, while the proximity of aliphatic groups to the aromatic cores attenuates stack elongation. Our findings broaden the role of solvents as design elements in self-assembly and offer new insights into the development of functional supramolecular polymorphs.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Hydrogen-bonded π-conjugated supramolecular polymers

  • Ximenis, Pedro
  • Martínez, Daniel
  • Rubert, Llorenç
  • Soberats, Bartolomé
[eng] The self-assembly of π-conjugated molecules offers a promising route for designing advanced functional materials with tailored optical and electronic properties. Owing to their nature, organic π-conjugated scaffolds spontaneously assemble by π–π stacking, while the introduction of hydrogen-bonding (H-bonding) interactions in these systems has emerged as a key strategy to gain control over self-assembly processes and the resulting supramolecular assemblies. H-bonding provides both specificity and directionality in non-covalent interactions, facilitating the formation of well-ordered and stable structures, such as supramolecular polymers. This review examines recent advances in design strategies that leverage H-bonding chromophores to fine-tune self-assembly behavior in solution, discussing the impact of monomer design and the experimental conditions on molecular packing and the morphologies of the resulting assemblies. Along with the thermodynamic advantages of H-bonding, its impact on self-assembly kinetics is also discussed, highlighting phenomena such as pathway complexity and related concepts like living supramolecular polymerization, secondary nucleation and supramolecular polymorphism. By providing a comprehensive overview of the current state of the field, this work aims to guide future research efforts toward the rational design of hierarchically ordered π-conjugated supramolecular materials.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Social sustainability and financial performance of multilatinas: the moderating role of board independence and the sustainability committee

  • Aguilera Caracuel, Javier
  • Guerrero Villegas, Jaime
  • Ahmadova, Gozal
  • Bornay Barrachina, María del Mar
Increasing demands are being placed on organisations to promote the economic, social and environmental welfare of the societies within which they operate. The social dimension of sustainability is an issue of current research interest, especially with respect to firms in emerging markets. In contributing to the welfare and progress of the societies in which they operate, these firms may also enhance the motivation and participation of their human resources. In this study, the generalised method of moments is applied to data from 115 multilatinas in Mexico and South America, for the period 2015–2022, to consider whether a firm’s adoption of internal and external social sustainability practices improves financial performance. In addition, we examine whether board independence and sustainability committees play a significant moderating role in equipping multilatinas to adopt social sustainability practices that enhance financial performance.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Role of p-Benzoquinone in the Photocatalytic Production of Solketal

  • Ariza-Pérez, Alejandro
  • Martín-Gómez, Juan
  • Herrera-Beurnio, M. Carmen
  • López Tenllado, Francisco Javier
  • Hidalgo-Carrillo, J.
  • Marinas, Alberto
  • Urbano, Francisco José
The role of p-benzoquinone (BQ) as a photocatalyst in the synthesis of solketal under UV irradiation has been studied, along with the combined use of BQ/TiO2 P25 as a photocatalytic system for the process. The presence of the O2/O2−• redox couple is essential for the reaction to take place. However, experiments with p-benzoquinone as a superoxide radical scavenger failed, with the opposite effect of enhancing the reaction being observed. It was found that p-benzoquinone and oxygen compete for photogenerated electrons in the conduction band of titania. A redox equilibrium between p-benzoquinone and hydroquinone (H2Q), mediated by the O2/O2−• system, was identified as a key factor in enabling the reaction. Furthermore, EPR spin-trapping experiments confirmed the presence of the carbon-centered radical 2-hydroxypropan-2-yl, which was determined to be the main radical species involved in the process. Either acetone or 2-propanol can generate this radical, with the BQ/H2Q redox system being pivotal in the formation of the hemiacetal intermediate. This intermediate is subsequently converted into the final acetal (solketal), with H2Q acting as a photoacid through an excited-state proton transfer (ESPT) mechanism. The photoacid behavior of hydroquinone was confirmed using pyridine as a basic probe, as the formation of hydroquinone–pyridine adducts was detected by Raman spectroscopy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Seven Millennia of Cedrus atlantica Forest Dynamics in the Western Rif Mountains (Morocco)

  • Alba Sánchez, Francisca
  • Abel-Schaad, Daniel
  • López Sáez, José Antonio
  • Romera-Romera, Daniel
  • Pérez Díaz, Sebastián
  • González-Hernández, Antonio
Atlas cedar (Cedrus atlántica (Endl.) Manetti ex Carrière) is an endemic and relict conifer species from northwestern Africa, relatively drought-tolerant but also highly sensitive to recurrent summer heat stress. Cedar forests have undergone a dramatic range contraction in recent decades. The development of effective conservation strategies requires long-term perspectives to understand how forests have responded to past disturbances. We present a multi-proxy, high-resolution analysis of a 122 cm-deep fossil record (Merj Lkhil; LKH) located at 1213 m a.s.l. in Jbel Bou Hachem (Moroccan Rif), providing insights into the fragmentation of cedar stands. Cedrus likely formed extensive lowland populations during the final stages of the Late Glacial and began migrating upslope during the Greenlandian. It reached its maximum extent in the Rif around 7000 cal yr BP. Thereafter, increasing aridity, enhanced seasonality, and growing anthropogenic pressure triggered its long-term decline. This trajectory involved a vertical reorganization of montane ecosystems, with Cedrus progressively retreating within mid- and low-elevation forests, while deciduous oaks maintained a long-term co-dominance and Q. ilex L. gradually expanded, especially at lower elevations. Today, Cedrus is confined to isolated high-elevation stands in Jbel Bou Hachem. These relic populations should be prioritized for conservation under ongoing climate and land-use change.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Effect of CaO in Alkali-Activated Fly Ash Mortar Under Different Curing Temperatures

  • Murillo-Silo, David
  • Fernández Ledesma, Enrique
  • Jiménez, José Ramón
  • Fernández Rodríguez, José María
  • Suescum-Morales, David
This work investigates the influence of CaO as a partial substitute for fly ash in alkali-activated fly ash mortars (AAFM), aiming to reduce reliance on conventional thermal curing. Mortars containing 0%, 2%, and 4% CaO were prepared and subjected to two curing regimes: thermal curing at 70 °C for 24 h and ambient curing at 21 °C for 24 h. The materials were thoroughly characterised by XRD, XRF, TGA/DTA, SEM, and particle size distribution, while compressive and flexural strength, density, and porosity were evaluated at 7, 14, and 28 days. The results demonstrated that CaO addition improved mechanical performance in both curing environments, particularly at a 4% substitution level, where compressive strength increased by up to 13.8% under thermal curing conditions. These improvements were associated with the formation of C-S-H and C-A-S-H gels, especially margarite, which contributed to accelerated setting and earlier demoulding. Nonetheless, while CaO incorporation improved mechanical performance and allowed earlier demoulding, it could not fully replicate the effects of heat curing at the studied percentages. Ambient-cured mortars exhibited higher porosity and less compact microstructures than thermally cured samples, which displayed denser, layered morphologies. The study confirms that CaO can act as a partial substitute or reducer for conventional curing, but is not sufficient to enable in situ applications without heat treatment. Future research should explore higher CaO contents in combination with set retarders, intermediate curing regimes, or alternative strategies to balance mechanical performance with energy efficiency.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Large-scale serosurvey of Chlamydia abortus in zoo ungulates in Spain

  • Beato-Benítez, Adrián
  • García-Bocanegra, Ignacio
  • Gonzálvez, Moisés
  • Villar-Ibáñez, Jessica
  • Jiménez-Martín, Débora
  • Martínez-Valverde, Rosa
  • Borragán, Santiago
  • Riva-Fraga, Manuel de la
  • Cano Terriza, David
Chlamydia abortus is a zoonotic bacterium worldwide distributed, which mainly leads to reproductive disorders in different domestic and wild species. Although C. abortus infection has been widely reported in free-ranging ungulates, information regarding this pathogen in captive wild ungulates remains limited. The aims of the present study were to assess C. abortus exposure in zoo ungulates in Spain and to determine the dynamics of seropositivity in animals sampled longitudinally throughout the study period. Between 2007 and 2023, serum samples from 483 ungulates representing 65 species were collected across 11 zoos from Spain. Additionally, 42 of the 483 animals were longitudinally sampled. Anti-C. abortus antibodies were detected in ten individuals (2.1 %; 95 %CI: 0.8–3.3) using a commercial indirect multi-species ELISA. Seropositivity was found in 9.2 % (6/65) of the species analyzed and in 45.5 % (5/11) of the zoos sampled. Seroprevalence was significantly higher during the period 2019–2020 compared to 2007–2014, 2015–2018 and 2021–2023 (P = 0.013). Three of the 42 longitudinally surveyed animals presented seropositivity throughout the study period. This is the first large-scale serosurvey of C. abortus conducted in zoo ungulates, also describing for the first time exposure to C. abortus in four species, which could expand the host range of this zoonotic bacterium. Our results suggest a limited but widespread circulation of C. abortus in wild ungulates housed in zoos in Spain. Zoo ungulates should be included in surveillance programs for C. abortus to enhance our understanding of the epidemiology of this zoonotic pathogen in anthropized environments under a One Health framework.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Compatibility of CO2 adsorbents with cement-, lime- and cement-lime based materials. Innovations in carbon capture and utilization technologies

  • Cantador Fernández, David
  • Álvarez, José Ignacio
  • Navarro-Blasco, Íñigo
  • Jiménez, José Ramón
  • Fernández Rodríguez, José María
The compatibility of three CO2-capturing mesoporous nanomaterials with cement-, lime- and cement-lime based materials was studied: a calcined Mg Al hydrotalcite and two mesoporous organosilica with ethylene (ethane-PMO) and phenylene (benzene-PMO) bridges. Isothermal calorimetry, thermogravimetric analysis and zeta-potential tests showed that the best compatibility results were achieved for hydrotalcite at 20 % of addition, which accelerated cement hydration by up to 100 % and increased its intensity. All hydrotalcite ratios studied improved the hydration results of the cement. Ethane-PMO produced a delay in cement hydration and it was found that for low percentages of addition (up to 1 %) the results were similar to those of the cement. Both the hydrotalcite at a high addition level and the ethane-PMO at a low addition level are compatible materials that support proper hydration and the formation of C-S-H phases in cement. Once proven to be compatible with cementitious and lime matrices, the incorporation of these CO2-capturing nanomaterials into cement- and lime-based materials could reduce their carbon footprint, making them more environmentally friendly.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The emergence of resistance to the antiparasitic selamectin in Mycobacterium smegmatis is improbable and contingent on cell wall integrity

  • Ezquerra-Aznárez, José Manuel
  • Gasparovic, Henrich
  • Chiner-Oms, Álvaro
  • Lucía, Ainhoa
  • Blázquez, Jesús
  • Comas, Iñaki
  • Kordulákova, Jana
  • Aínsa, José A.
  • Ramón-García, Santiago
18 páginas, 6 figuras, 4 tablas, Tuberculosis remains the deadliest infectious disease of the 21st century. New antimicrobials are needed to improve treatment outcomes and enable therapy shortening. Drug repurposing is an alternative to the traditional drug discovery process. The avermectins are a family of macrocyclic lactones with anthelmintic activity active against Mycobacterium tuberculosis. However, their mode of action in mycobacteria remains unknown. In this study, we employed traditional mutant isolation approaches using Mycobacterium smegmatis, a non-pathogenic M. tuberculosis surrogate. We were only able to isolate mutants with decreased susceptibility to selamectin using the ∆nucS mutator M. smegmatis strain. This phenotype was caused by mutations in mps1 and mmpL11. Two of these mutants were used for a second experiment in which high-level selamectin-resistant mutants were isolated; however, specific mutations driving the phenotypic change to high-level resistance could not be identified. The susceptibility to selamectin in these mutants was restored to the basal level by subinhibitory concentrations of ethambutol. The selection of ethambutol resistance in a high-level selamectin-resistant mutant also resulted in multiple colonies becoming susceptible to selamectin again. These colonies carried mutations in embB, suggesting that the integrity of the cell envelope is a prerequisite for selamectin resistance. The absence of increased susceptibility to selamectin in an embB deletion strain demonstrated that the target of selamectin is not cytosolic. Our data show that the concurrence of specific multiple mutations and complete integrity of the mycobacterial envelope are necessary for selamectin resistance. Our studies provide first-time insights into the antimycobacterial mode of action of the antiparasitic avermectins.IMPORTANCETuberculosis is the deadliest infectious disease of the 21st century. New antibiotics are needed to improve treatment. However, developing new drugs is costly and lengthy. Drug repurposing is an alternative to the traditional drug discovery process. The avermectins are a family of drugs used to treat parasitic infections that are active against Mycobacterium tuberculosis, the bacterium that causes tuberculosis. However, their mode of action in mycobacteria remains unknown. Understanding how avermectins kill mycobacteria can facilitate its development as an anti-mycobacterial drug, including against M. tuberculosis.In this study, we used Mycobacterium smegmatis, a non-pathogenic M. tuberculosis surrogate model to understand the molecular mechanisms of how selamectin (a drug of the avermectin family selected for this study as a model) acts against mycobacteria. Our data show that the generation of resistance to selamectin is unlikely and that complete integrity of the mycobacterial envelope is necessary for selamectin resistance, providing first-time insights into the antimycobacterial mode of action of the avermectins., This research was supported by internal group funding (J.A.A. and S.R.-G) and by a fellowship from the Spanish Government (Programa de Formación de Profesorado Universitario) Ref. FPU18/03873 to J.M.E.-A. J.M.E.-A. also received support for a short-term stage from the Red Temática de Excelencia de Biología de Sistemas de Micobacterias (Myconet) to I.C. J.B. received funding from Ministerio de Ciencia (MCIN/AEI/10.13039/501100011033) (Grant PID2020-112865RB-I00). J.K. received funding from the Slovak Research and Development Agency [grant n. APVV-19-0189] and the OPII, ACCORD, ITMS2014+: 313021X329, co-financed by ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

“The landscape of love”: sex-specific habitat-use during the mating season in a solitary large carnivore

  • Zarzo-Arias, Alejandra
  • Steyaert, Sam M. J. G.
  • Heeres, Rick W.
  • Kindberg, Jonas
  • Hertel, Anne G.
  • Swenson, Jon E.
  • Leclerc, Martin
  • Penteriani, Vincenzo
  • Frank, Shane C.
  • Pelletier, Fanie
  • Zedrosser, Andreas
Context: In mammals, reproductive strategies and movement behavior can differ between sexes, influenced by biological and environmental factors. Whereas males typically adopt a “roam-to-mate” strategy, increasing movement to locate females, females may also adjust their behavior to enhance mating opportunities. Habitat and human disturbance can further shape the spatial structure of mating encounters. Objectives: This study investigates sex-specific habitat use during mating in brown bears. We test (1) which habitats facilitate initial male–female encounters, and (2) how habitat use differs between solitary and consorting individuals, focusing on sex-based differences and responses to anthropogenic features. Methods: We used GPS data from 70 unique adult brown bears (44 females, 26 males) during the mating season in Sweden (2006–2016). We contrasted initial encounter areas of male–female pairs with surrounding available habitat to assess encounter site preferences, accounting for natural and anthropogenic landscape features. Additionally, we compared habitat use for each sex when solitary versus consorting. Results: Bears most often encountered the opposite sex in clearcuts and young forests. When consorting, males moved farther away from anthropogenic areas than when solitary and increased their use of clearcuts, whereas females reduced their use of young and old forests, in contrast to males. Both sexes approached roads more when consorting. Conclusion: This study revealed distinct sex-specific habitat preferences during brown bear consorting behavior, supporting the evidence of female “roam-to-mate” behavior by adjusting to males’ habitat use. Our findings emphasize the importance of managing anthropogenic landscapes for conservation efforts, especially if they disrupt mating behaviors., Swedish Environmental Protection Agency; Norwegian Environment Agency; Austrian Science Fund; Swedish Association for Hunting and Wildlife Management; European Union Center (US); Ministerio de Universidades (España); Universidad de Oviedo; German Science Foundation; Natural Sciences and Engineering Research Council of Canada; Canada Research Chair program; Ministerio de Ciencia e Innovación (España); Agencia Estatal de Investigación (España); University of South-Eastern Norway
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Resultados del proyecto IN4LABS - PLATAFORMA ABIERTA PARA FACILITAR EL DESARROLLO DE LABORATORIOS REMOTOS DE INDUSTRIA 4.0

  • Martin, Sergio
El proyecto In4Labs tiene como objetivo acelerar la transición digital de la educación en ingeniería y la industria hacia la Industria 4.0. Sus principales contribuciones son el desarrollo de una plataforma para facilitar la creación de laboratorios remotos para Industria 4.0 y el establecimiento y evaluación de laboratorios remotos para diversas tecnologías de Industria 4.0. Este dataset incluye todos los resultados de investigación del proyecto, incluyendo el código fuente, los diseños de hardware de la plataforma y laboratorios, así como prácticas propuestas. El conjunto de laboratorios remotos desarrollados incluye: • Laboratorio de IoT: Sistema con 3 dispositivos IoT interconectados a través de 5 medios de comunicación distintos, tanto cableados (I2C, SPI, UART, RS484) como inalámbricos (WiFi y Bluetooth), permitiendo el desarrollo de prácticas remotas con un escenario de control de temperatura de un ventilador. • Laboratorio de Sensores: Sistema que permite la experimentación remota con diversos sensores (RFID, gas, humo, temperatura, humedad, presión, etc.), programables de forma remota por los estudiantes. • Laboratorio de Ciberseguridad: Entorno web que permite la ejecución remota de prácticas de cifrado y defensa contra ataques como "Man-in-the-Middle", desbordamiento de búfer y denegación de servicio en un sistema IoT. • Laboratorio de Integración de Sistemas: Uso de infraestructura remota para integración de NodeRED en un escenario IoT real. • Laboratorio de Robótica: Programación remota de brazo robótico controlado por dispositivo Arduino. • Laboratorio de Nube: Sistema IoT basado en un proveedor de nube. • Laboratorio de Inteligencia Artificial: Entorno web que permite la ejecución de código remoto de prácticas sobre aprendizaje automático a través de un servidor de alto rendimiento. • Laboratorio de Big Data: Entorno web que permite la ejecución de código remoto de prácticas sobre análisis de datos y creación de paneles de control con datos a través de un servidor de alto rendimiento. El proyecto impulsa la transición digital hacia la Industria 4.0, reduciendo drásticamente los costos y tiempos de desarrollo de laboratorios remotos, favoreciendo su adopción global. Esto mejora la capacitación de profesionales, estudiantes y personas con discapacidad, fortalece la empleabilidad y acelera el crecimiento económico europeo, alineándose con la estrategia del Mercado Único Digital.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent Advances in Ni-Catalyzed 1,1-Difunctionalization of Unactivated Olefins

  • Velasco-Rubio, Álvaro
  • Martin, Ruben
Unactivated olefins rank amongst the most important feedstocks in organic synthesis. Their availability makes them particularly useful synthons for subsequent functionalization, particularly in a catalytic manner. Driven by the popularity ascribed by nickel catalysis as a new tool to rapidly forge molecular architectures via one-or two-electron manifolds, the recent years have witnessed significant advances in Ni-catalyzed olefin difunctionalization. While 1,2-difunctionalization or remote functionalization via “chain-walk” have become mature disciplines for repurposing the potential of olefins as building blocks, it was only recently that extensions of this chemistry to 1,1-difunctionalization have been possible. This review summarizes the recent advances in Ni-catalyzed olefin 1,1-difunctionalization, holding considerable promise as a new powerful strategy for our ever-growing synthetic repertoire.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Osteogenic potential of a biomaterial enriched with osteostatin and mesenchymal stem cells in osteoporotic rabbits

  • Luengo Alonso, Gonzalo
  • Bravo Giménez, Beatriz
  • Lozano Borregón, Daniel
  • Heras, Clara
  • Sánchez Salcedo, Sandra
  • Benito Garzón, Lorena
  • Abella García, Mónica
  • Vallet Regí, María Dulce Nombre
  • Cecilia López, David
  • Salinas Sánchez, Antonio Jesús
Mesoporous bioactive glasses (MBGs) of the SiO2–CaO–P2O5 system are biocompatible materials with a quick and effective in vitro and in vivo bioactive response. MBGs can be enhanced by including therapeutically active ions in their composition, by hosting osteogenic molecules within their mesopores, or by decorating their surfaces with mesenchymal stem cells (MSCs). In previous studies, our group showed that MBGs, ZnO-enriched and loaded with the osteogenic peptide osteostatin (OST), and MSCs exhibited osteogenic features under in vitro conditions. The aim of the present study was to evaluate bone repair capability after large bone defect treatment in distal femur osteoporotic rabbits using MBGs (76%SiO2–15%CaO–5%P2O5–4%ZnO (mol-%)) before and after loading with OST and MSCs from a donor rabbit. MSCs presence and/or OST in scaffolds significantly improved bone repair capacity at 6 and 12 weeks, as confirmed by variations observed in trabecular and cortical bone parameters obtained by micro-CT as well as histological analysis results. A greater effect was observed when OST and MSCs were combined. These findings may indicate the great potential for treating critical bone defects by combining MBGs with MSCs and osteogenic peptides such as OST, with good prospects for translation to clinical practice.