Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conversion of Glycerol to Value Added Products in a Semi-Continuous Batch Reactor Using Noble Metals Supported on ZSM-11 Zeolite

  • Diguilio, Eliana
  • Renzini, María S.
  • Pierella, Liliana B.
  • Domine, Marcelo Eduardo
[EN] Au, Pt, and Pd supported on ZSM-11 microporous zeolite were investigated as catalysts for glycerol (GLY) oxidation towards higher value added products. ZSM-11 was synthesized by hydrothermal treatment. Subsequently, ion exchange with NH4Cl was performed to recover acidic sites and then, Au, Pt, and Pd were incorporated onto this material by wet impregnation procedure. After thermal treatment of desorption and calcination, the corresponding Au, Pt, and Pd-ZSM-11 catalysts were obtained. These materials were characterized by different techniques, such as XRD, ICP, TEM- XEDS, and XPS, and were evaluated in the glycerol oxidation reaction by using alkaline medium and molecular oxygen as oxidizing agent. The higher conversion of GLY (66.5 mol.%) was reached for the Pt-ZSM-11 catalyst with moderate selectivity towards lactic acid (LA), while the bimetallic Au-Pt-ZSM-11 catalyst offered high selectivity to LA at moderate GLY conversion. Optimization of the main reaction parameters (i.e., temperature, reaction time and NaOH/GLY ratio) was carried out to maximize the selectivity towards the LA desired product. Thus, LA selectivity values close to 55% at GLY conversion >65% can be reached by using Pt-ZSM-11 as a catalyst under mild reaction conditions., This research was partially funded by Universidad Tecnologica Nacional UTN [PIDUTN4796], and Consejo Nacional de Investigaciones Cientificas y Tecnicas CONICET [PIP-CONICET 112 201301 00146 CO].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning product selectivity in the catalytic oxidation of glycerol by employing metal-ZSM-11 materials

  • Diguilio, Eliana
  • Galarza, Emilce D.
  • Pierella, Liliana B.
  • Renzini, Maria S.
  • Domine, Marcelo Eduardo
[EN] Copper and chromium supported on ZSM-11 (MEL-type structure) microporous zeolites were investigated as catalysts for glycerol oxidation towards dihydroxyacetone and lactic acid. ZSM-11 was synthesized by hydrothermal crystallization. Subsequently, alkaline treatment of desilication was carried out in order to generate zeolites with micro-mesoporosity. Ion exchange with ammonium chloride was performed to recover acidic sites and then, Cr(iii) and Cu(ii) species were incorporated onto these materials. Finally, thermal treatment at 500 degrees C was carried out. These materials were characterized by different techniques and then evaluated in the glycerol oxidation reaction by employing H2O2 as an oxidizing agent. The maximum conversion of glycerol (similar to 70%) was reached over the Cr-ZSM-11 catalyst with a selectivity of similar to 28% towards dihydroxyacetone. Meanwhile, Cu-ZSM-11 offered 50% glycerol conversion with a selectivity of 68% towards lactic acid. In both the cases, the optimal reaction conditions were studied to maximize the selectivity towards the products mentioned above., This project was partially supported by CONICET PIP 112 201301 00146 CO and PID-UTN3493. We also wish to thank CONICET and UTN.