Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly efficient hydroamination of phenylacetylenes with anilines catalysed by gold nanoparticles embedded in nanoporous polymer matrix: Insight into the reaction mechanism by kinetic and DFT investigations

  • Dentoni Litta, Antonella
  • Buonerba, Antonio
  • Casu, Alberto
  • Falqui, Andrea
  • Capaccione, Carmine
  • Franconetti, Antonio
  • Grassi, Alfonso
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The synthesis of aromatic ketimines via hydroamination of phenylacetylenes (PAs) with anilines (ANs) has been accomplished in high yields and with excellent regio- and stereo-selectivity using gold nanoparticles (AuNPs) embedded in crystalline syndiotactic polystyrene-cis-1,4-polybutadiene (sPSB) multiblock copolymer matrix. The performances of the AuNPs-sPSB catalyst exceed those of the other commercial gold catalysts as a result of the physical chemical properties of the nanoporous polystyrenic support which allows excellent activity, thermal stability and recyclability of the catalyst. Electron donating (EDGs) and electron withdrawing (EWGs) substituents onto the aromatic group of ANs and PAs yield, in all examined cases, high selectivity in the formation of the thermodynamic favoured E stereoisomer of the aromatic ketimines. Kinetic investigation of the reaction mechanism in the presence of AN and of the deuterated analogue, AN-N,N-d(2), highlighted a new reaction pathway for the hydroamination reaction, which was also supported by DFT calculations. Actually, the formation of AN aggregates stabilized by hydrogen bonding interactions produces a favourable transition state for the nucleophilic attack of AN to PA, coordinated/activated onto AuNPs surface. Moreover, an additional AN molecule cooperatively assists the 1,3-hydrogen shuttling from the N atom to the C-beta of the coordinated enamine intermediate to produce the kinetically favoured Z-ketimine intermediate that in turn evolves into the thermodynamically stable E-aromatic ketimine. The first order kinetics observed for AN, along with the experimental energetic barrier (AGl = 26.6 +/- 0.7 kcal mol(-1); AHl = 13.4 +/- 1.8 kcal mol(-1); ASl = -0.04 +/- 0.04 kcal mol(-1) K-1) found in good agreement with the energy of the transition state calculated for the 1,3-hydrogen shift in the DFT modelling, strongly support that the latter is the rate determining step in the gold catalysed hydroamination of AN with PA., The authors are grateful for founding from the Ministero dell'Universita e della Ricerca-MIUR (PRIN2017 grant) , and from the Universita degli Studi di Salerno (FARB grants) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical modeling of microwave liver ablation with a variable-porosity medium approach

  • Tucci, Claudio
  • Iasiello, Marcello
  • Andreozzi, Assunta
  • Vanoli, Giuseppe Peter
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
[EN] Background and objectives: Thermal ablation of tumors plays a key role to fight cancer, since it is a minimally invasive treatment which involves some advantages compared to surgery and chemotherapy, such as shorter hospital stays and consequently lower costs, along with minor side effects. In this context, computational modeling of heat transfer during thermal ablation is relevant to accurately predict the obtained ablation zone in order to avoid tumor recurrence risk caused by incomplete ablation, and the same time to save the surrounding healthy tissue. The aim of this work is to develop a more realistic porous media-based mathematical model to simulate a microwave thermal ablation (MWA) of an in vivo liver tumor surrounded by healthy tissue. Methods: The domain is made up of a spherical tumor bounded by a cylindrical healthy liver tissue. The simulated microwave antenna is a 14 G HS Amica-Gen Probe, and the supplied power of 60 W is applied for 300 s and 600 s. The model consists in coupling modified Local Thermal Non Equilibrium (LTNE) equations with the electromagnetic equations. The LTNE equations include a variable porosity function which fits the porosity changing from the tumor core to the rim based on experimental measures in in vivo cases. Moreover, four different blood vessels' uniform distributions are investigated to compare the effects of different vascularizations of the considered target tissue. Results: The results are shown in terms of temperature fields, ablation diameters and volumes based on the Arrhenius thermal damage model with 99% of cell death probability. The outcomes show a very good agreement with a clinical study on human patients with hepatocellular carcinoma using the same antenna and energy setting, when terminal arteries distribution is included. Conclusions: In this work, an in vivo microwave ablation of liver tumor surrounded by healthy tissue is modeled with a variable-porosity medium approach based on experimental measures. The outcomes shown for distinct vascularizations underline the key relevance of modeling more and more accurately tumor MWA, by considering increasingly realistic features, avoiding tumor recurrence, and improving both medical protocols and devices. (C) 2021 Elsevier B.V. All rights reserved., This work was supported by the Grant RTI2018-094357-B-C21 funded by MCIN/AEI/10.13039/501100 011033 and by the Italian Government MIUR Grant No. "PRIN-2017F7KZWS". This work was also supported by the Universitadegli Studi di Napoli Federico II international mobility program for researchers
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pennes&apos, bioheat equation vs. porous media approach in computer modeling of radiofrequency tumor ablation

  • Tucci, Claudio
  • Iasiello, Marcello
  • Andreozzi, Assunta
  • Vanoli, Giuseppe Peter
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
[EN] The objective of this study was to compare three different heat transfer models for radiofrequency ablation of in vivo liver tissue using a cooled electrode and three different voltage levels. The comparison was between the simplest but less realistic Pennes' equation and two porous media-based models, i.e. the Local Thermal Non-Equilibrium (LTNE) equations and Local Thermal Equilibrium (LTE) equation, both modified to take into account two-phase water vaporization (tissue and blood). Different blood volume fractions in liver were considered and the blood velocity was modeled to simulate a vascular network. Governing equations with the appropriate boundary conditions were solved with Comsol Multiphysics finite-element code. The results in terms of coagulation transverse diameters and temperature distributions at the end of the application showed significant differences, especially between Pennes and the modified LTNE and LTE models. The new modified porous media-based models covered the ranges found in the few in vivo experimental studies in the literature and they were closer to the published results with similar in vivo protocol. The outcomes highlight the importance of considering the three models in the future in order to improve thermal ablation protocols and devices and adapt the model to different organs and patient profiles., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad under "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad", Grant No "RTI2018-094357-B-C21" and by the Italian Government MIUR Grant No "PRIN-2017F7KZWS".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust measurement of innovation performances in Europe with a hierarchy of interacting composite indicators

  • Corrente, Salvatore
  • Greco, Salvatore
  • Makkonen, Teemu
  • Garcia-Bernabeu, Ana|||0000-0003-3181-7745
[EN] For a long time, the measurement of innovation has been at the forefront of policymakers' and researchers' agenda worldwide. Therefore, there is an ongoing debate about which indicators should be used to measure innovation. Recent approaches have favoured the use of composite innovation indicators. The European Innovation Scoreboard (EIS) is a relevant tool for benchmarking innovation in Europe. Still, the EIS lacks a proper scheme for weighting the included indicators according to their relative importance. Moreover, despite there is a consensus on the importance of interaction between different dimensions of innovation, there is no composite indicator taking into account of this. We propose an appraisal methodology permitting to take into consideration the interaction of dimensions to be aggregated and robustness concerns related to the elicitation of the weights assigned to the elementary indicators structured in a hierarchical way. With this aim, we apply a multiple-criteria decision-making approach being the conjunction of three methodologies, namely, the multiple-criteria hierarchy process, the Choquet integral and the stochastic multicriteria acceptability analysis. It helps the users to rank and benchmark countries' innovation performance at partial and global level taking into account the importance and interaction of dimensions as well as robustness concerns., Salvatore Corrente and Salvatore Greco acknowledge: Ministero dell'Istruzione, dell'Universitá e della Ricerca (MIUR)-PRIN 2017, project "Multiple Criteria Decision Analysis and Multiple Criteria Decision Theory".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The KM3NeT multi-PMT optical module

  • Aiello, S.
  • Albert, A.
  • Alshamsi, M.
  • Alves Garre, S.
  • Aly, Z.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Aublin, J.
  • Avgitas, T.
  • Bou Cabo, M.
  • Diego-Tortosa, D.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
[EN] The optical module of the KM3NeT neutrino telescope is an innovative multi-faceted large area photodetection module. It contains 31 three-inch photomultiplier tubes in a single 0.44 m diameter pressure-resistant glass sphere. The module is a sensory device also comprising calibration instruments and electronics for power, readout and data acquisition. It is capped with a breakout-box with electronics for connection to an electro-optical cable for power and long-distance communication to the onshore control station. The design of the module was qualified for the first time in the deep sea in 2013. Since then, the technology has been further improved to meet requirements of scalability, cost-effectiveness and high reliability. The module features a sub-nanosecond timing accuracy and a dynamic range allowing the measurement of a single photon up to a cascade of thousands of photons, suited for the measurement of the Cherenkov radiation induced in water by secondary particles from interactions of neutrinos with energies in the range of GeV to PeV. A distributed production model has been implemented for the delivery of more than 6000 modules in the coming few years with an average production rate of more than 100 modules per month. In this paper a review is presented of the design of the multi-PMT KM3NeT optical module with a proven effective background suppression and signal recognition and sensitivity to the incoming direction of photons., The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Européenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Île-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18- 1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell¿Università e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappel¿k Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovación, Investigación y Universidades (MCIU): Programa Estatal de Generación de Conocimiento (refs. PGC2018-096663- B-C41,-A C42,-B-C43,-B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolía (refs. GRISOLIA/2018/119,/2021/192) and GenT (refs. CIDEGENT/2018/034, /2019/043,/2020/049,/2021/023) programs, Junta de Andalucía (ref. AFQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain.