Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A 3D-printed metal-supported gyroid Ni/Al2O3 catalyst for CO2 methanation

  • Jivrakh, Kedar Bharat
  • Alkhoori, Ayesha
  • Polychronopoulou, Kyriaki
  • Al-Rub, Rashid Abu
  • Alamoodi, Nahla
  • Karanikolos, Georgios N.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Andrés-Olmos, Lorena María
  • Chica, Antonio
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] The utilization of 3D-printing in catalyst production for CO2 methanation has emerged as a response to the challenges posed by the highly exothermic reaction and high gas space velocity, conditions that necessitate enhanced heat and mass transfer while maintaining optimal catalytic performance. In this work, we developed a new CO2 methanation catalyst comprising a Ni/Al2O3 powder-coated 3D-printed aluminum alloy of gyroid configuration. The metallic alloy (AlMgSi) was 3D-printed (3DAL) using selective laser melting (SLM), and Ni/Al2O3 powder was coated on it by washcoating. Microscopy and tomography techniques were employed to examine the morphological characteristics of the catalyst and to analyze internal topology, and hydrogen temperature-programmed reduction (H2-TPR) and chemisorption provided insights into the reduction sites and active metal phase. The catalytic performance was assessed through CO2 methanation experiments at various temperatures ranging from 250 °C to 500 °C, using a CO2:H2:He gas mixture (1:4:5). The 3D-printed Ni/Al2O3-3DAL catalyst exhibited high CH4 selectivity (97.7¿%) and CO2 conversion (77.6¿%) at 400 °C, which is attributed to the reduced tendency of sintering and the effective heat transfer owing to the metallic support. The 3D-printed gyroid metallic support provided a higher surface area-to-volume ratio enabling higher catalyst loading per unit volume, and improved reactants contact with the active catalyst phase yielding enhanced catalytic performance compared to powder. It also offers enhanced thermal energy management and heat dissipation, which are critical for highly exothermic reactions such as CO2 methanation, as well as mechanical strength compared to conventional beads and pellets., The authors acknowledge financial support from Khalifa University through the Center for Catalysis and Separations (CeCaS, RC2 2018 024). GNK acknowledges also funding from the programme MEDICUS (grant # 82246) of the University of Patras. Support by the Advanced Digital & Additive Manufacturing Center of Khalifa University (ADAM Center, Award No. RCII-2019 003) is also greatly appreciated. We acknowledge the assistance provided by Tareq Farrah from the ADAM Center for the 3D-printing of the metal alloy. Experimental support and valuable technical discussions with Alberto Barros, Raul Bruno, Miriam Arribas, and Mercedes Tabernero from ITQ are also greatly acknowledged. The authors acknowledge the Electron Microscopy Service of the Universitat Politecnica de Valencia for assistance in SEM, TEM and XRM characterization.