Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20504
Datos de investigación Set de datos (Dataset)

Wi-Fi RSSI fingerprint dataset from two malls with validation routes in a shop-level for indoor positioning [Dataset]

  • López Pastor, José Antonio
  • Ruiz Ruiz, Antonio
  • García Sánchez, Antonio Javier
  • Gómez Tornero, José Luis
The dataset is composed of the RSSI fingerprinting calibration of two malls employing four different smartphones with the random walking survey method. Moreover, the dataset includes validation routes performed with ten smartphones from various brands and labeled with the code of the shops where they were registered. For evaluation purposes, together with the samples, information related to the shopping center like the Euclidean distance between shops is provided. The files are described as follows: -'building.csv’: two rows with the id of mall 1 and mall 2. -‘floor.csv’: there is a row for each of the floors of the two malls. Three floors for mall 1 and two floors for mall 2 -‘zones.csv’: for each zone is indicated the id of the mall and the id floor. There are 69 zones from mall 1 and 124 for mall 2 -‘training.csv’: in this file are registered the ids and the description of the five different calibrations performed (one per smartphone) in each of the malls. -‘training_sample.csv’: each row of the file has the RSSI in dBm recorded during the off-line calibration phase together with the timestamp, channel, and MAC of the AP. -‘route.csv’: the id’s and the description of each of the validation routes are recorded in this file. -‘route_sample.csv’: with a similar structure than the training_sample.csv, the RSSI, timestamp, channel, and MAC acquired during the validation routes are stored in this file. -‘euclidea_distance.csv”: to evaluate the error of the different algorithms, this file recorded the euclidean distance from the center of a shop to each other in meters.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20341
Datos de investigación Set de datos (Dataset)

Dataset for paper "Flow Resistance for a Varying Density of Obstacles on Smooth and Rough Beds" [Dataset]

  • Guillén Ludeña, Sebastián
  • López, Diego
  • Mignot, Emmanuel
  • Riviere, Nicolas
This dataset contains the experimental data that supports the paper: Guillén-Ludeña, S., Lopez, D., Mignot, E., & Riviere, N. (2019). Flow Resistance for a Varying Density of Obstacles on Smooth and Rough Beds. Journal of Hydraulic Engineering, 146(2), 04019059.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20360
Datos de investigación Set de datos (Dataset)

In vitro lead tolerance and accumulation in three Chrysanthemum cultivars for phytoremediation purposes with ornamental plants [Dataset]

  • García Fernández, Gregorio
  • Ramírez, Agripina
  • Werner, Olaf
  • Ros, Rosa María
Data set associated with the published article entitled: In vitro lead tolerance and accumulation in three Chrysanthemum cultivars for phytoremediation purposes with ornamental plants.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20302
Datos de investigación Set de datos (Dataset)

A low-cost telerehabilitation paradigm for bimanual training [Dataset]

  • Ventura, Roni Barak
  • Nov, Oded
  • Ruiz Marín, Manuel
  • Raghavan, Preeti
  • Porfiri, Maurizio
We present a novel, low-cost telerehabilitation system dedicated for bimanual training. The system captures the user’s movements with a Microsoft Kinect sensor and an inertial measurement unit (IMU). Herein, we deposit data we collected on a single, healthy subject who interacted with our system as described in our manuscript.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20315
Datos de investigación Set de datos (Dataset)

Carbon emissions and economic assessment of farm operations under different tillage practices in organic rainfed almond orchards under semiarid Mediterranean conditions [Dataset]

  • Martín Górriz, Bernardo
  • Maestre Valero, José Francisco
  • Almagro, María
  • Boix Fayos, Carolina
  • Martínez Mena, María
This dataset corresponds to yield, price and fuel consumption from organic rainfed almond orchards in SE Spain under different diversification and tillage practices. The objective is to carry out an integrated environmental (focused on the CO2 emissions) and economic assessment of farm operations under different diversification and tillage practices through a cradle-to-farm gate life cycle assessment (LCA) based on these data. These data correspond to the open-access article "Carbon emissions and economic assessment of farm operations under different tillage practices in organic rainfed almond orchards under semiarid Mediterranean conditions" published in Scientia Horticulturae. (https://doi.org/10.1016/j.scienta.2019.108978), funded by the European Commission Horizon 2020 project Diverfarming [grant agreement 728003].
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20500
Datos de investigación Set de datos (Dataset)

Valuing diversification benefits through intercropping in Mediterranean agroecosystems: A choice experiment approach. [Dataset]

  • Alcón Provencio, Francisco José
  • Cristina Marín Miñano
  • Zabala García, José Ángel
  • de Miguel Gómez, María Dolores
  • Martínez Paz, José M.
This data set contains information from a choice experiment survey developed to value the socio-economic benefits of intercropping practices in Mediterranean agroecosystems. These data correspond to the open-access article "Valuing diversification benefits through intercropping in Mediterranean agroecosystems: A choice experiment approach" published in Ecological Economics. (https://doi.org/10.1016/j.ecolecon.2020.106593), funded by he European Commission Horizon 2020 project Diverfarming [grant agreement 728003].
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20490
Datos de investigación Set de datos (Dataset)

Structure under confinement and shear [Dataset]

  • González Martínez, Juan Francisco
  • Barker, Robert
  • Boyd, H.
  • Garvey, Christopher J.
  • Gutfreund, Philipp
  • Klechikov, Alexey
  • Prescott, Stuart
  • Sotres, Javier
The study of soft matter films under mechanical confinement was originally made possible by the emergence of the Surface Force Apparatus and the Atomic Force Microscope. These techniques provide accurate interaction forces at different separations. However, they do not provide structural information. Going beyond measurements of forces and measuring near-surface structures has been a challenge for a number of decades. In this regard, Neutron Reflectometry (NR) offers unparalleled possibilities for extracting structural information of mechanically confined thin films. Recently, a team partly formed by the applicants developed a sample environment for NR studies of mechanically confined thin soft films that has been a breakthrough in confined soft matter investigations. However, there is significant room for improvement. Specifically, the possibility to study shear-induced structural rearrangements would be of great value in lubrication science along with a number of other fields. We have addressed this challenge and designed a new NR confinement cell allowing shearing of two opposing surfaces. Here, we apply for beam time to test the first prototype of this novel sample environment.
Repositorio Digital UPCT
oai:repositorio.upct.es:10317/20313
Datos de investigación Set de datos (Dataset)

C:N:P in dinoflagellates [Dataset]

  • Carnicer Castaño, Olga
  • Irwin, Andrew J.
  • Finkel, Zoe V.
Data on C:N:P of lab-cultured marine dinoflagellates were identified by searching in the ISI Web of Science using keywords such as elemental composition, elemental stoichiometry, elemental ratios, C:N, C:P or C:N combined with the word dinoflagellate. These studies and suitable studies cited within these sources were evaluated for data collection. Experimental conditions were recorded along with the elemental composition data including culturing methods, the media used, culture temperature and salinity. Cell volume and growth rate data were collected when available. Species were then assigned the following traits: 1. thecate or athecate; 2. non-toxic or the potential to produce C-rich or N-rich toxins; and 3. small, medium or large cell volume.
Buscador avanzado